Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PRESSURE WAVE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1931

Pressure Fluctuations in a Common-Rail Fuel Injection System

This report presents the results of an investigation to determine experimentally the instantaneous pressures at the discharge orifice of a common-rail fuel injection system in which the timing valve and cut-off valve were at some distance from the automatic fuel injection valve, and also to determine the methods by which the pressure fluctuations could be controlled. The results show that pressure wave phenomena occur between the high-pressure reservoir and the discharge orifice, but that these pressure waves can be controlled so as to be advantageous to the injection of the fuel. The results also give data applicable to the design of such an injection system for a high-speed compression-ignition engine.

Rothrock, A M↗
NASA NTRS2021

Gravity Wave Observations by the Mars Science Laboratory REMS Pressure Sensor and Comparison with Mesoscale Atmospheric Modeling with MarsWRF

Surface pressure measurements on Mars have revealed a wide variety of atmospheric phenomena. The Mars Science Laboratory Rover Environmental Monitoring Station pressure sensor dataset is now the longest duration record of surface pressure on Mars. We use the first 2580 martian sols, nearly 4 Mars years,of measurements to identify atmospheric pressure waves with periods of tens of minutes to hours using wavelet analysis on residual pressure after the tidal harmonics are removed. We find these waves have a clear diurnal cycle with strongest activity in the early morning and late evening and a seasonal cycle with the strongest waves in the second half of the martian year (Ls= 180-360°). The strongest such waves of the entire mission occurred during the Mars Year 34 global dust storm. Comparable atmospheric waves are identified using atmospheric modeling with the MarsWRF general circulation model in a “nested” high spatial resolution mode. With the support of the modeling, we find these waves best fit the expected properties of inertia-gravity waves with horizontal wavelengths of O(100s) of km. PLAIN LANGUAGE SUMMARY Measuring air pressure from the surface of Mars has revealed a wide variety of atmospheric phenomena. The Curiosity rover's record or surface air pressure is now the longest yet made on Mars.We use the first ~8 years of Curiosity's pressure observations to look for atmospheric waves with periods of tens of minutes to hours. We find these waves have a clear pattern in their daily behavior with the strongest activity in the early morning and late evening and a seasonal cycle with the strongest waves in the second half of the martian year (Northern hemisphere fall and winter). The strongest such waves occurred in 2018 during a global dust storm. We find comparable waves in atmospheric modeling. With the support of modeling, we find these waves best fit the expected properties of buoyancy waves forced by airflow over topography with horizontal wavelengths of 100-1000 km.

Scott D Guzewich↗
NASA NTRS1954

Unsteady oblique interaction of a shock wave with a plane disturbance

Analysis is made of the flow field produced by oblique impingement of weak plane disturbances of arbitrary profile on a plane normal shock. Three types of disturbance are considered: (a) sound wave propagating in the gas at rest into which the shock moves; (b) sound wave overtaking the shock from behind,(The sound wave reflects as a sound wave, and a stationary vorticity wave is produced); (c) an incompressible vorticity wave stationary in the gas ahead of the shock. The incident wave refracts as a stationary vorticity wave, and either a sound wave or attenuating pressure wave is also produced. Computations are presented for the first two types of incident wave, over the range of incidence angles, for shock Mach numbers of 1, 1.5, and infinity.

Moore, Franklin K↗
NASA NTRS1984

Field-incidence noise transmission loss of general aviation aircraft double wall configurations

Theoretical formulations have been developed to describe the transmission of reverberant sound through an infinite, semi-infinite and a finite double panel structure. The model incorporates the fundamental resonance frequencies of each of the panels, the mass-air-mass resonances of the structure, the standing wave resonances in the cavity between the panels and finally the coincidence resonance regions, where the exciting sound pressure wave and flexural waves of each of the panels coincide. It is shown that phase cancellation effects of pressure waves reflected from the cavity boundaries back into the cavity allows the transmission loss of a finite double panel structure to be approximated by a finite double panel mounted in an infinite baffle having no cavity boundaries. Comparison of the theory with high quality transmission loss data yields good agreement in the mass-controlled frequency region. It is shown that the application of acoustic blankets to the double panel structure does not eliminate the mass-air-mass resonances if those occur at low frequencies. It is concluded that this frequency region of low noise transmission loss is a potential interior noise problem area for propeller driven aircraft having a double panel fuselage construction.

Grosveld, F. W.↗
NASA NTRS1997

Measurement of shear-wave velocity by ultrasound critical-angle reflectometry (UCR)

There exists a growing body of research that relates the measurement of pressure-wave velocity in bone to different physiological conditions and treatment modalities. The shear-wave velocity has been less studied, although it is necessary for a more complete understanding of the mechanical properties of bone. Ultrasound critical-angle reflectometry (UCR) is a noninvasive and nondestructive technique previously used to measure pressure-wave velocities both in vitro and in vivo. This note describes its application to the measurement of shear-wave velocity in bone, whether directly accessible or covered by soft tissue.

NASA Discipline Cardiopulmonary↗
NASA NTRS1991

Calculation Of Pneumatic Attenuation In Pressure Sensors

Errors caused by attenuation of air-pressure waves in narrow tubes calculated by method based on fundamental equations of flow. Changes in ambient pressure transmitted along narrow tube to sensor. Attenuation of high-frequency components of pressure wave calculated from wave equation derived from Navier-Stokes equations of viscous flow in tube. Developed to understand and compensate for frictional attenuation in narrow tubes used to connect aircraft pressure sensors with pressure taps on affected surfaces.

Whitmore, Stephen A.↗
NASA NTRS1994

Surface acoustic wave oxygen pressure sensor

A transducer for the measurement of absolute gas-state oxygen pressure from pressures of less than 100 Pa to atmospheric pressure (1.01 x 10(exp 5) Pa) is based on a standard surface acoustic wave (SAW) device. The piezoelectric material of the SAW device is coated with a compound which will selectively and reversibly bind oxygen. When oxygen is bound by the coating, the mass of the coating increases by an amount equal to the mass of the bound oxygen. Such an increase in the mass of the coating causes a corresponding decrease in the resonant frequency of the SAW device.

Oglesby, Donald M.↗
NASA NTRS1994

Active control of turbomachine discrete tones

This paper was directed at active control of discrete frequency noise generated by subsonic blade rows through cancellation of the blade row interaction generated propagating acoustic waves. First discrete frequency noise generated by a rotor and stator in a duct was analyzed to determine the propagating acoustic pressure waves. Then a mathematical model was developed to analyze and predict the active control of discrete frequency noise generated by subsonic blade rows through cancellation of the propagating acoustic waves, accomplished by utilizing oscillating airfoil surfaces to generate additional control propagating pressure waves. These control waves interact with the propagating acoustic waves, thereby, in principle, canceling the acoustic waves and thus, the far field discrete frequency tones. This model was then applied to a fan exit guide vane to investigate active airfoil surface techniques for control of the propagating acoustic waves, and thus the far field discrete frequency tones, generated by blade row interactions.

Fleeter, Sanford↗
NASA NTRS1985

On the accuracy of the pseudocompressibility method in solving the incompressible Navier-Stokes equations

The method of pseudocompressibility is being tested for its accuracy in solving the incompressible Navier-Stokes equations. An implicit, finite-difference computer code is used to solve the equations in a three-dimensional, curvilinear coordinate system. The code employs artificial compressibility for solving the pressure field, coupled with an implicit, approximate-factorization scheme. This coupling is known as the pseudocompressibility method. The pseudocompressibility method introduces pressure waves of finite speed into the fluid medium that would otherwise have an infinite sound speed. The waves die out as the solution converges, and the steady state solution approaches a divergence-free condition. However, these waves limit the time-accuracy of the computations. The effects of these waves are analyzed and criteria are set for choosing the pseudocompressibility parameters that govern the pressure wave speed. Test cases are presented that verify these criteria. The code is tested by computing laminar flow over a two-dimensional, backward-facing step and over a two-dimensional, impulsively started circular cylinder.

Rogers, S. E.↗
NASA NTRS1987

On the accuracy of the pseudocompressibility method in solving the incompressible Navier-Stokes equations

The method of pseudocompressibility is tested for its accuracy in solving the incompressible Navier-Stokes equations. An implicit, finite difference computer code is used to solve the equations in a three-dimensional, curvilinear coordinate system. The code employs artificial compressibiity for solving the pressure field, coupled with an implicit, approximate factorization scheme. This coupling is known as the pseudocompressibility method and introduces pressure waves of finite speed into the fluid medium that would otherwise have an infinite sound speed. The waves die out as the solution converges, and the steady state solution approaches a divergence-free condition. These waves, however, limit the time accuracy of the computations. The effects of these waves are analysed and criteria are set for choosing the pseudocompressibility parameter that governs the pressure wave speed; test cases are presented that verify these criteria. The code is tested by computing laminar flow over a two-dimensional, backward-facing step and over a two-dimensional, impulsively started circular cylinder.

Rogers, S. E.↗
NASA NTRS1974

Analysis of oscillatory pressure data including dynamic stall effects

The dynamic stall phenomenon was examined in detail by analyzing an existing set of unsteady pressure data obtained on an airfoil oscillating in pitch. Most of the data were for sinusoidal oscillations which penetrated the stall region in varying degrees, and here the effort was concentrated on the chordwise propagation of pressure waves associated with the dynamic stall. It was found that this phenomenon could be quantified in terms of a pressure wave velocity which is consistently much less than free-stream velocity, and which varies directly with frequency. It was also found that even when the stall region has been deeply penetrated and a substantial dynamic stall occurs during the downstroke, stall recovery near minimum incidence will occur, followed by a potential flow behavior up to stall inception.

Carta, F. O.↗
NASA NTRS1975

Chordwise propagation of dynamic stall cells on an oscillating airfoil

The dynamic stall phenomenon was examined in detail by analyzing a set of unsteady pressure data obtained on an airfoil oscillating in pitch. These data were for sinusoidal oscillations which penetrated the stall region in varying degrees, and here the effort was concentrated on the chordwise propagation of pressure waves associated with the dynamic stall. It was found that this phenomenon could be quantified in terms of a pressure wave velocity which is consistently much less than free-stream velocity, and which varies directly with frequency. It was also found that even when the stall region has been deeply penetrated and a substantial dynamic stall occurs during the downstroke, stall recovery near minimum incidence will occur, followed by a potential flow behavior up to stall inception.

Carta, F. O.↗
NASA NTRS1990

Shear-layer-edge interaction - Simulation by finite-area vortices

The impingement of a row of finite-area vortices on an edge is presently used to efficiently simulate the shear layer/edge interaction, yielding support for the hypothesis that the pressure waves emitted from an impingement edge are generated by the vortices/edge interaction. A parametric application of this method shows that pressure wave amplitude is a function of the length of the succession of vortices and that frequency of their release; this amplitude decreases with decreasing vortex spacing while succession length remains constant, or when succession length decreases while the number of vortices remains constant.

Panaras, Argyris G.↗
NASA NTRS2015

Computational Fluid Dynamics Study on the Effects of RATO Timing on the Scale Model Acoustic Test

The Scale Model Acoustic Test (SMAT) is a 5% scale test of the Space Launch System (SLS), which is currently being designed at Marshall Space Flight Center (MSFC). The purpose of this test is to characterize and understand a variety of acoustic phenomena that occur during the early portions of lift off, one being the overpressure environment that develops shortly after booster ignition. The SLS lift off configuration consists of four RS-25 liquid thrusters on the core stage, with two solid boosters connected to each side. Past experience with scale model testing at MSFC (in ER42), has shown that there is a delay in the ignition of the Rocket Assisted Take Off (RATO) motor, which is used as the 5% scale analog of the solid boosters, after the signal to ignite is given. This delay can range from 0 to 16.5ms. While this small of a delay maybe insignificant in the case of the full scale SLS, it can significantly alter the data obtained during the SMAT due to the much smaller geometry. The speed of sound of the air and combustion gas constituents is not scaled, and therefore the SMAT pressure waves propagate at approximately the same speed as occurs during full scale. However, the SMAT geometry is much smaller allowing the pressure waves to move down the exhaust duct, through the trench, and impact the vehicle model much faster than occurs at full scale. To better understand the effect of the RATO timing simultaneity on the SMAT IOP test data, a computational fluid dynamics (CFD) analysis was performed using the Loci/CHEM CFD software program. Five different timing offsets, based on RATO ignition delay statistics, were simulated. A variety of results and comparisons will be given, assessing the overall effect of RATO timing simultaneity on the SMAT overpressure environment.

Nielsen, Tanner↗
NASA NTRS1965

Infra-sonic waves from aurorae.

Auroral infrasonics and interpretation of wave- form periodicity of atmospheric traveling auroral pressure wave

INFRASONIC FREQUENCY↗