Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PETE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Modeling the Value Recovery of Rare Earth Permanent Magnets at End-of-Life

Permanent magnets containing rare earth elements (REEs) such as Dysprosium and Neodymium offer an advantage over non-REE containing magnets (e.g. ferrite or AlNiCo) in terms of power relative to size. However, REE availability has varied significantly in recent years leading to volatility in the cost of rare earth permanent magnets (REPMs). The supply of REEs can be increased by recycling consumer products and industrial machinery that contain REPMs at product end-of-life (EOL). This paper discusses the REE recovery process for EOL products. The optimal dismantling of products is examined with an emphasis placed on obtaining used REPMs. The challenge of collecting, managing, transporting, and processing used products is addressed through the development of a cost model for REPM recovery. This model is used to investigate several EOL strategies for recovering REPMs. Sensitivity analysis is conducted to identify the key factors that influence value recovery economics. A hard disk drive serves as a case study for model demonstration.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

A transmissive, spectrum-splitting concentrating photovoltaic module for hybrid photovoltaic-solar thermal energy conversion

Here, a spectrum splitting, transmissive concentrating photovoltaic (tCPV) module is proposed and designed for a hybrid photovoltaic-solar thermal(PV/T) system. This module enables the system to more fully utilize the full spectrum of incoming sunlight. By utilizing III-V triple junction solar cells with bandgaps of 2.1eV/1.7eV/1.4eVin the module, ultraviolet (UV) and visible light will be absorbed and converted to electricity, while infrared (IR) light will pass through and be captured by a solar thermal receiver and stored as heat. The stored heat energy may be dispatched as electricity or process heat, as needed.Numerical analysis based on the Finite Elemental Method (FEM), ray tracing, circuit analysis, device modelling, and more is employed to design this tCPV module. According to these simulations, the tCPV module can perform with overall power conversion efficiency exceeding 43.5% for above bandgap (in-band)light under a standard AM1.5D solar spectrum, under an average concentration ratio of 400 suns.Passive and active cooling methods, keeping cells below 110°C, are also investigated and discussed, indicating that a transparent active cooling design could improve the CPV module efficiency by around 1%(absolute), relative to a passive design,by reducing the maximum cell working temperature by ~16°C. Furthermore, cost analysis shows that installation cost of around 1.9/W–2.2/W could be reached for the tCPV based PV/T system,which shows a competitive economic advantage compared to a more conventional PV with battery system.

14 SOLAR ENERGY↗

Stress accommodation in nanoscale dolan bridges designed for superconducting qubits

Josephson junctions are the principal circuit element in numerous superconducting quantum information devices and can be readily integrated into large-scale electronics. However, device integration at the wafer scale necessarily depends on having a reliable, high-fidelity, and high-yield fabrication method for creating Josephson junctions. When creating Al/AlO x based superconducting qubits, the standard Josephson junction fabrication method relies on a sub-micron suspended resist bridge, known as a Dolan bridge, which tends to be particularly fragile and can often times fracture during the resist development process, ultimately resulting in device failure. In this work, we demonstrate a unique Josephson junction lithography mask design that incorporates stress-relief channels. Our simulation results show that the addition of stress-relief channels reduces the lateral stress in the Dolan bridge by more than 70% for all the bridge geometries investigated. In practice, our novel mask design significantly increased the survivability of the bridge during device processing, resulting in 100% yield for over 100 Josephson junctions fabricated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The value of integrating pre-clinical data to predict nausea and vomiting risk in humans as illustrated by AZD3514, a novel androgen receptor modulator

Nausea and vomiting are components of a complex mechanism that signals food avoidance and protection of the body against the absorption of ingested toxins. This response can also be triggered by pharmaceuticals. Predicting clinical nausea and vomiting liability for pharmaceutical agents based on pre-clinical data can be problematic as no single animal model is a universal predictor. Moreover, efforts to improve models are hampered by the lack of translational animal and human data in the public domain. AZD3514 is a novel, orally-administered compound that inhibits androgen receptor signaling and down-regulates androgen receptor expression. Here we have explored the utility of integrating data from several pre-clinical models to predict nausea and vomiting in the clinic. Single and repeat doses of AZD3514 resulted in emesis, salivation and gastrointestinal disturbances in the dog, and inhibited gastric emptying in rats after a single dose. AZD3514, at clinically relevant exposures, induced dose-responsive “pica” behaviour in rats after single and multiple daily doses, and induced retching and vomiting behaviour in ferrets after a single dose. We compare these data with the clinical manifestation of nausea and vomiting encountered in patients with castration-resistant prostate cancer receiving AZD3514. Our data reveal a striking relationship between the pre-clinical observations described and the experience of nausea and vomiting in the clinic. In conclusion, the emetic nature of AZD3514 was predicted across a range of pre-clinical models, and the approach presented provides a valuable framework for predicition of clinical nausea and vomiting. - Highlights: • Integrated pre-clinical data can be used to predict clinical nausea and vomiting. • Data integrated from standard toxicology studies is sufficient to make a prediction. • The use of the nausea algorithm developed by Parkinson (2012) aids the prediction. • Additional pre-clinical studies can be used to confirm and quantify the risk.

60 APPLIED LIFE SCIENCES↗

Digital light processing of porous LLZTO scaffolds for Li-garnet solid-state batteries

Li 7 La 3 Zr 2 O 12 (LLZO)-based solid-state electrolytes (SEs) are promising materials for next-generation solid-state batteries. In this work, digital light processing (DLP), an emerging additive manufacturing technology, is employed to produce porous Ta-doped LLZO (LLZTO) scaffolds. The self-standing scaffolds are 100 μm thick and have 40% porosity. The scaffolds demonstrate symmetric cell cycling stability exceeding 1,500 h at 0.1 mA/cm2 current density, with a capacity of 0.1 mAh/cm 2 (1 h for each half cycle). At higher current densities, reversible soft shorts frequently happen, while immediate hard shorts are prevented due to Li dendrite growth being hindered by the tortuous pore network. In addition to the cycling stability, the phase stability of LLZTO is investigated during the post-printing thermal process for printing resin removal. We discovered that the LLZTO partially decomposes into Li 2 Zr 2 O 7 and other impurity phases from 400°C to 800°C, but the pure LLZTO phase is restored upon the completion of resin removal beyond 800°C.

Li-metal anode↗

Li-Substituted Layered-Spinel Cathode Material for Sodium-Ion Batteries

The O 3 -type layered Na(Ni x Fe y Mn z )O 2 (0 < x, y, z < 1) cathode materials have attracted great interest in sodium ion batteries due to the abundance and cost of raw materials and their high specific capacities. However, the cycling stability and rate capability at high voltages (> 4.0 V) of these materials remain an issue. In this work, we successfully synthesized a Li-substituted layered-tunneled (O 3 -spinel) intergrowth cathode (LS-NFM) to address these issues. The remarkable structural compatibility and connectivity of the two phases were confirmed by X-ray diffraction (XRD), selected area electron diffraction (SAED), and high-resolution transmission electron microscopy (HRTEM). The LS-NFM electrode reached a discharge capacity of 96 mAh g -1 with a capacity retention of 86% after 100 cycles at a current rate of 100 mA g -1 in a voltage window of 2.0-4.2 V. Moreover, the LS-NFM cathode exhibited an enhanced rate capability in comparison to the undoped single-phased layered cathode (NFM). The enhanced rate capability of LS-NFM can be explained by the significantly increased effective Na + diffusivity measured by the galvanostatic intermittent titration technique (GITT) compared to the undoped control NFM cathode, which can be ascribed to the improved charge transport kinetics through shortened diffusion path by direct connection between the 3D channels in the spinel phase and 2D channels in the layered phase. The results from ex situ hard/soft X-ray adsorption spectroscopy (XAS) suggest that the capacity of the LS-NFM cathode is mainly associated with the Ni 2+ /Ni 4+ redox couple and slightly from the Fe 3+ /Fe 4+ redox couple. The voltage profile of the LS-NFM cathode exhibits a reversible plateau above 4.0 V, indicating great stability at high voltages and structural stabilization by the spinel phase. In addition to the substitution of various transition metals, or the modification of the stoichiometry of each transition metal, this study provides a new strategy to improve electrochemical performance of layered cathode materials for sodium ion batteries.

25 ENERGY STORAGE↗

Understanding H 2 Evolution from the Decomposition of Dibutylmagnesium Isomers Using in-Situ X-ray Diffraction Coupled with Mass Spectroscopy

Alkylmagnesium compounds such as dibutylmagnesium can be effectively decomposed to produce MgH 2 and Mg metal for applications such as hydrogen storage, single site catalysis, and powder metallurgy or as the last step of comprehensive processes to produce Mg metal from magnesium salts. For these applications it is important to understand the decomposition reactions of dibutylmagnesium and to quantify its decomposition products. In this study, to avoid interference from air and moisture, an in situ X-ray diffraction (XRD) coupled with mass spectroscopy system was developed to investigate phase changes and released products in real time for the decomposition reactions. For the dibutylmagnesium (MgBu 2 n-n ) with two n -butyl groups, transformation to MgH 2 occurred at 250 °C and transformation to Mg metal occurred near 384 °C. The diffraction data suggest the possibility of an intermediate phase with one butyl group formed during the transformation to MgH 2 . Decomposition of MgH 2 under vacuum is accelerated by eliminating H 2 from the system as it is evolved. The sec- butyl n -butylmagnesium (MgBu 2 s-n ) was observed to decompose at as low as 50 °C, indicating the increased lability of the sec -butyl group in the dibutylmagnesium isomer. Thermogravimetric analysis (TGA) for the MgBu 2 n-n and MgBu 2 s-n loaded in air-free conditions recorded higher than 98% conversion to MgH 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Origins of Irreversibility in Layered NaNi x Fe y Mn z O 2 Cathode Materials for Sodium Ion Batteries

Layered NaNi x Fe y Mn z O 2 cathode (NFM) is of great interest in sodium ion batteries due to its high theoretical capacity and utilization of abundant, low-cost, environmentally-friendly raw materials. Nevertheless, there remains insufficient understanding on the concurrent local environment evolution in each transition metal (TM) that largely influences the reversibility of the cathode materials upon cycling. In this work, we investigate the reversibility of TM ions in layered NFMs with varying Fe contents and potential windows. Utilizing ex situ synchrotron X-ray absorption near edge spectroscopy (XANES) and extended X-ray absorption fine structure (EXAFS) of pre-cycled samples the valence and bonding evolution of the TMs are elucidated. It is found that Mn is electrochemically inactive as indicated by the insignificant change of Mn valence and Mn-O bonding distance. Fe is electrochemically inactive after the first five cycles. The Ni redox couple contributes most of the charge compensation for NFMs. Ni redox is quite reversible in the cathodes with less Fe contents. Furthermore, the Ni redox couple shows significant irreversibility with high Fe content of 0.8. The electrochemical reversibility of the NFM cathode becomes increasingly enhanced with the decrease of either Fe content or with lower upper charge cutoff potential.

25 ENERGY STORAGE↗

Coordination Covalent Frameworks: A New Route for Synthesis and Expansion of Functional Porous Materials

The synthetic approaches for fine-tuning the structural properties of coordination polymers or metal organic frameworks have exponentially grown during the last decade. This is due to the control over the properties of the resulting structures such as stability, pore size, pore chemis-try and surface area for myriad possible applications. Herein, we present a new class of porous materials called Covalent Coordination Frameworks (CCFs) that were designed and effectively synthesized using a two-step reticular chemistry approach. During the first step, trigonal prismatic molecular building block was isolated using 4-aminobenazoic acid and Cr (III) salt, subsequently in the second step the polymerization of the isolated molecular building blocks (MBBs) takes place by the formation of strong covalent bonds where small organic molecules can connect the MBBs forming extended porous CCF materials. All the isolated CCFs were found to be permanently porous while the discrete MBB were non-porous. This approach would inevitably open a feasible path for the applications of reticular chemistry and the synthesis of novel porous materials with various topologies under ambient conditions using simple organic molecules and versatile MBBs with different functionalities which would not be possible using the traditional one step approach

COFs↗

Morphology and Crystallinity Effects of Nanochanneled Niobium Oxide Electrodes for Na-Ion Batteries

Niobium pentoxide (Nb 2 O 5 ) is a promising negative electrode for sodium ion batteries (SIBs). By engineering the morphology and crystallinity of nanochanneled niobium oxides (NCNOs) the kinetic behavior and charge storage mechanism of Nb 2 O 5 electrodes were investigated. Amorphous and crystalline NCNO samples were made by modulating anodization conditions (20 - 40V and 140 - 180 °C) to synthesize nanostructures of differing pore sizes and wall thicknesses with identical chemical composition. The electrochemical energy storage properties of the NCNOs were studied with the amorphous samples showing better overall rate performance than the crystalline samples. The enhanced rate performance of the amorphous samples is attributed to the higher capacitive contributions and Na-ion diffusivity analyzed from cyclic voltammetry (CV) and galvanostatic intermittent titration technique (GITT). It was found that the amorphous samples with smaller wall thicknesses facilitated improved kinetics. Among samples with similar pore size and wall thickness, the difference in their power performance stems from crystallinity effect, which plays a more significant role in the resulting kinetics of the materials for Na-ion batteries.

25 ENERGY STORAGE↗

The Role of Catholyte Modulation in Suppressing the Initial Capacity Fade of Zinc Electrolytic Manganese Dioxide Coin Cells

Despite its potential for zinc–manganese oxide batteries, electrolytic manganese dioxide (EMD) can experience capacity fade due to a deficiency in the Mn 2+ supply at the cathode electrolyte interphase (CEI) from side reactions, even in the presence of an electrolyte additive. In this work, electrolyte loading modulation at the cathode electrolyte interface (CEI) was correlated with Zn∥EMD cell capacity retention and cycling performance, as a proposed measure to curb the initial capacity fade observed in EMD. Initial galvanostatic charge/discharge cycling, with varied electrolyte loading, revealed severe capacity fade (from ~188 to 10 mAh g –1 for the highest loading of 200 μL) within the first 15 cycles. Such a decrease in cell capacity is correlated with the formation of a Mn 4+ deposit on the current collector and consequently, the Mn 2+ depletion at CEI, as was supported by elemental and Raman analyses. Interestingly, confinement of the electrolyte to the CEI at a lower (≤15 μL) electrolyte loading mitigated Mn 4+ side-deposition, maintaining the cell capacity at >80% over the first 15 cycles. Interfacial Mn supply/depletion could be monitored via voltammetric analysis based on changes of the Zn 2+ insertionreduction peak. Additional galvanostatic experiments corroborated the voltammetric interpretation and the proposed degradation pathway in the studied cell conditions. The outcomes of this work provide practical insight into coin-cell design and configuration strategies for developing Zn∥EMD batteries.

25 ENERGY STORAGE↗

The paleoclimatic footprint in the soil carbon stock of the Tibetan permafrost region

Tibetan permafrost largely formed during the late Pleistocene glacial period and shrank in the Holocene Thermal Maximum period. Quantifying the impacts of paleoclimatic extremes on soil carbon stock can shed light on the vulnerability of permafrost carbon in the future. Here, we synthesize data from 1114 sites across the Tibetan permafrost region to report that paleoclimate is more important than modern climate in shaping current permafrost carbon distribution, and its importance increases with soil depth, mainly through forming the soil's physiochemical properties. We derive a new estimate of modern soil carbon stock to 3 m depth by including the paleoclimate effects, and find that the stock ( 36 .6 &#x2212;<!-- - --> 2 .4 + 2 .3 PgC) is triple that predicted by ecosystem models (11.5 ± 4.2 s.e.m PgC), which use pre-industrial climate to initialize the soil carbon pool. The discrepancy highlights the urgent need to incorporate paleoclimate information into model initialization for simulating permafrost soil carbon stocks.

54 ENVIRONMENTAL SCIENCES↗

Fusing subnational with national climate action is central to decarbonization: the case of the United States

Approaches that root national climate strategies in local actions will be essential for all countries as they develop new nationally determined contributions under the Paris Agreement. The potential impact of climate action from non-national actors in delivering higher global ambition is significant. Sub-national action in the United States provides a test for how such actions can accelerate emissions reductions. We aggregated U.S. state, city, and business commitments within an integrated assessment model to assess how a national climate strategy can be built upon non-state actions. We find that existing commitments alone could reduce emissions 25% below 2005 levels by 2030, and that enhancing actions by these actors could reduce emissions up to 37%. We show how these actions can provide a stepped-up basis for additional federal action to reduce emissions by 49%—consistent with 1.5 °C. Our analysis demonstrates sub-national actions can lead to substantial reductions and support increased national action.

54 ENVIRONMENTAL SCIENCES↗

Smart soft contact lenses for continuous 24-hour monitoring of intraocular pressure in glaucoma care

Continuous monitoring of intraocular pressure, particularly during sleep, remains a grand challenge in glaucoma care. Here we introduce a class of smart soft contact lenses, enabling the continuous 24-hour monitoring of intraocular pressure, even during sleep. Uniquely, the smart soft contact lenses are built upon various commercial brands of soft contact lenses without altering their intrinsic properties such as lens power, biocompatibility, softness, transparency, wettability, oxygen transmissibility, and overnight wearability. We show that the smart soft contact lenses can seamlessly fit across different corneal curvatures and thicknesses in human eyes and therefore accurately measure absolute intraocular pressure under ambulatory conditions. We perform a comprehensive set of in vivo evaluations in rabbit, dog, and human eyes from normal to hypertension to confirm the superior measurement accuracy, within-subject repeatability, and user comfort of the smart soft contact lenses beyond current wearable ocular tonometers. We envision that the smart soft contact lenses will be effective in glaucoma care.

36 MATERIALS SCIENCE↗

Mechanism of glycoform specificity and in vivo protection by an anti-afucosylated IgG nanobody

Abstract Immunoglobulin G (IgG) antibodies contain a complex N -glycan embedded in the hydrophobic pocket between its heavy chain protomers. This glycan contributes to the structural organization of the Fc domain and determines its specificity for Fcγ receptors, thereby dictating distinct cellular responses. The variable construction of this glycan structure leads to highly-related, but non-equivalent glycoproteins known as glycoforms. We previously reported synthetic nanobodies that distinguish IgG glycoforms. Here, we present the structure of one such nanobody, X0, in complex with the Fc fragment of afucosylated IgG1. Upon binding, the elongated CDR3 loop of X0 undergoes a conformational shift to access the buried N -glycan and acts as a ‘glycan sensor’, forming hydrogen bonds with the afucosylated IgG N -glycan that would otherwise be sterically hindered by the presence of a core fucose residue. Based on this structure, we designed X0 fusion constructs that disrupt pathogenic afucosylated IgG1-FcγRIIIa interactions and rescue mice in a model of dengue virus infection.

59 BASIC BIOLOGICAL SCIENCES↗

Evaluation of FluSight influenza forecasting in the 2021–22 and 2022–23 seasons with a new target laboratory-confirmed influenza hospitalizations

Accurate forecasts can enable more effective public health responses during seasonal influenza epidemics. For the 2021–22 and 2022–23 influenza seasons, 26 forecasting teams provided national and jurisdiction-specific probabilistic predictions of weekly confirmed influenza hospital admissions for one-to-four weeks ahead. Forecast skill is evaluated using the Weighted Interval Score (WIS), relative WIS, and coverage. Six out of 23 models outperform the baseline model across forecast weeks and locations in 2021–22 and 12 out of 18 models in 2022–23. Averaging across all forecast targets, the FluSight ensemble is the 2nd most accurate model measured by WIS in 2021–22 and the 5th most accurate in the 2022–23 season. Forecast skill and 95% coverage for the FluSight ensemble and most component models degrade over longer forecast horizons. In this work we demonstrate that while the FluSight ensemble was a robust predictor, even ensembles face challenges during periods of rapid change.

59 BASIC BIOLOGICAL SCIENCES↗