Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Detection and Mitigation of Radionuclides in the Environment: Toward a Clean Ecosystem

This research describes a straightforward approach to producing surface-engineered nanomaterials for the detection and mitigation of radionuclides generated in nuclear facilities. Here, a micelle forming surfactant ligand, namely cetyltrimethylammonium bromide (CTAB), was engineered on the surface of iron oxide nanoparticles and explored for the removal of radioactive materials, such as pertechnetate (TcO 4 – ), from aqueous environments. A series of analytical tools were employed to characterize the nanocomposite materials, such as SEM, EDS, UV-Vis spectroscopy, DLS, and PALS, and evaluated for their ability to capture a model analyte, perrhenate (ReO 4 – ) ions. The iron oxide magnetic nanoparticles retain their magnetic properties after surface functionalization and can be easily manipulated and collected with a magnet. Therefore, these nanocomposite materials can be used to remotely remediate environments by scavenging and collecting radionuclide species at the desired location.

63 RADIATION, THERMAL, AND OTHER ENVIRON. POLLUTAN↗

An enhanced droplet-based liquid microjunction surface sampling system coupled with HPLC-ESI-MS/MS for spatially resolved analysis

Droplet-based liquid microjunction surface sampling coupled with high-performance liquid chromatography (HPLC)-electrospray ionization (ESI)-tandem mass spectrometry (MS/MS) for spatially resolved analysis provides the possibility of effective analysis of complex matrix samples and can provide a greater degree of chemical information from a single spot sample than is typically possible with a direct analysis of an extract. Described here is the setup and enhanced capabilities of a discrete droplet liquid microjunction surface sampling system employing a commercially available CTC PAL autosampler. The system enhancements include incorporation of a laser distance sensor enabling unattended analysis of samples and sample locations of dramatically disparate height as well as reliably dispensing just 0.5 μL of extraction solvent to make the liquid junction to the surface, wherein the extraction spot size was confined to an area about 0.7 mm in diameter; software modifications improving the spatial resolution of sampling spot selection from 1.0 to 0.1 mm; use of an open bed tray system to accommodate samples as large as whole-body rat thin tissue sections; and custom sample/solvent holders that shorten sampling time to approximately 1 min per sample. Lastly, the merit of these new features was demonstrated by spatially resolved sampling, HPLC separation, and mass spectral detection of pharmaceuticals and metabolites from whole-body rat thin tissue sections and razor blade (“crude”) cut mouse tissue.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of Cobalt Oxide Nanoparticles on the Nano-scale Free Volume and Optical Properties of Biodegradable CMC/PVA Films

Chemically prepared cobalt oxide nanoparticles (NPs) were added to biodegradable carboxymethyl cellulose (CMC) (20%)/polyvinyl alcohol (PVA) (80%) blend films. The structural properties of these films were investigated by X-ray diffraction, Fourier transformation infrared spectroscopy (FTIR) and differential thermal analysis (DTA). Co{sub 3}O{sub 4}/(CMC + PVA) films show a semi-crystalline structure and the degree of crystallinity decreases with adding Co{sub 3}O{sub 4} NPs. FTIR confirms the good interaction between the blend chains and Co{sub 3}O{sub 4} NPs. The melting temperature T{sub m} for CMC/PVA is about 212 °C then decreased with increasing Co{sub 3}O{sub 4} content, due to some decrease in the ordered association of the blend which results in a decrease in the blend crystallinity. Positron annihilation lifetime spectroscopy (PALS) measurements were carried out with a conventional fast–fast coincidence spectrometer. It was found that ortho-positronium lifetime τ{sub 3} and free volume V{sub f} increase while o-Ps intensity I{sub 3} still constant as Co{sub 3}O{sub 4} concentration increases. This is because adding Co{sub 3}O{sub 4} NPs encourages the formation of o-Ps. The swelling ratio SR% as a function of Co{sub 3}O{sub 4} concentration was also studied and its value increases with Co{sub 3}O{sub 4} addition. The optical study illustrated the decrease of the transmittance T of the films from 87 to 35.5% with increasing Co{sub 3}O{sub 4} content from 0 to 0.9 wt%. Also, both the direct and indirect optical band gaps of the films red-shifted from 4.05 to 3.75 eV and 3.3 to 2.75 eV, respectively. The influence of Co{sub 3}O{sub 4} on the refractive index of the films is also reported.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Metabolomic and transcriptomic analysis of the rice response to the bacterial blight pathogen Xanthomonas oryzae pv. oryzae

Bacterial leaf blight (BLB), caused by Xanthomonas oryzae pv. oryzae (Xoo), gives rise to devastating crop losses in rice. Disease resistant rice cultivars are the most economical way to combat the disease. The TP309 cultivar is susceptible to infection by Xoo strain PXO99. A transgenic variety, TP309_Xa21, expresses the pattern recognition receptor Xa21, and is resistant. PXO994raxST, a strain lacking the raxST gene, is able to overcome Xa21-mediated immunity. We used a single extraction solvent to demonstrate comprehensive metabolomics and transcriptomics profiling under sample limited conditions, and analyze the molecular responses of two rice lines challenged with either PXO99 or PXO994raxST. LC–TOF raw data file filtering resulted in better within group reproducibility of replicate samples for statistical analyses. Accurate mass match compound identification with molecular formula generation (MFG) ranking of 355 masses was achieved with the METLIN database. GC–TOF analysis yielded an additional 441 compounds after BinBase database processing, of which 154 were structurally identified by retention index/MS library matching. Multivariate statistics revealed that the susceptible and resistant genotypes possess distinct profiles. Although few mRNA and metabolite differences were detected in PXO99 challenged TP309 compared to mock, many differential changes occurred in the Xa21-mediated response to PXO99 and PXO994raxST. Acetophenone, xanthophylls, fatty acids, alkaloids, glutathione, carbohydrate and lipid biosynthetic pathways were affected. Significant transcriptional induction of several pathogenesis related genes in Xa21 challenged strains, as well as differential changes to GAD, PAL, ICL1 and Glutathione-S-transferase transcripts indicated limited correlation with metabolite changes under single time point global profiling conditions.

59 BASIC BIOLOGICAL SCIENCES↗

Suppression of NF-κB activation by PDLIM2 restrains hepatic lipogenesis and inflammation in high fat diet induced mice

Highlights: • PDLIM2 deficiency promotes HFD-induced mice obesity and insulin resistance. • PDLIM2 deficiency promotes hepatic dyslipidemia in HFD-induced mice. • PDLIM2 deficiency intensifies HFD-induced hepatic inflammation. • Reducing NF-κB activation attenuates PDLIM2 deficiency-exacerbated inflammation and dyslipidemia in PAL-treated primary hepatocytes. Non-alcoholic fatty liver disease (NAFLD) is characterized by hepatic steatosis, insulin resistance, dyslipidemia and a systemic pro-inflammatory response, a leading cause of cirrhosis and hepatocellular carcinoma. Here, we showed that PDZ-LIM domain-containing protein 2 (PDLIM2) was an effective suppressor of steatohepatitis. After 16 weeks on a high fat diet (HFD), obesity, insulin resistance, hepatic dyslipidemia and inflammation were markedly aggravated in PDLIM2-knockout (KO) mice. PDLIM2 deletion resulted in lipid accumulation in liver tissue samples of HFD-induced mice, as evidenced by the significant increase of hepatic TG and TC through reducing the expression of lipogenesis- and transcriptional regulators of lipid metabolism-related genes and enhancing fatty acid oxidation-associated molecules. In addition, PDLIM2-ablation promoted the expression of pro-inflammatory cytokines by activating nuclear factor kappa-B (NF-κB) signaling pathway, as supported by the remarkable increase of phosphorylated IKKβ, IκBα and NF-κB expressions in liver of HFD-fed mice. Of note, the in vitro study demonstrated that PDLIM2 ablation-enhanced inflammatory response and disorder of lipid metabolism were abrogated by suppressing NF-κB activity. Collectively, the findings could lead to the development of potential therapeutic strategy to prevent NAFLD and associated metabolic disorders by targeting PDLIM2.

60 APPLIED LIFE SCIENCES↗

Suppressing Irf2bp2 expressions accelerates metabolic syndrome-associated brain injury and hepatic dyslipidemia

Highlights: • Irf2bp2 deletion promotes HFD-induced metabolic syndrome and cognitive dysfunction in mice. • Irf2bp2 knockout aggravates brain injury in HFD-fed mice. • Irf2bp2 ablation alleviates oxidative stress and inflammation in brain of HFD-fed mice. • Suppressing Irf2bp2 expressions exacerbate inflammatory response in PAL- or LPS-treated BV2 cells. Increasing studies indicate that high fat diet (HFD) induces neuroinflammation in animal models with obesity, yet the pathology of it is unclear. Interferon Regulatory Factor 2 Binding Protein 2 (Irf2bp2) is a key regulator of macrophage polarization, playing an essential role in regulating inflammatory response. This study investigated the effects of Irf2bp2 on HFD-induced brain injury, and explored the possible molecular mechanisms using wild type (WT) and Irf2bp2 knockout (KO) mice. The results indicated that HFD-increased body weight of mice was further elevated by Irf2bp2-knockout. In addition, Irf2bp2-deletion accelerated HFD-induced metabolic syndrome, as evidenced by the promoted fasting glucose and insulin levels. In the results of behavioral measurements, Irf2bp2-knockout intensified cognitive deficit in HFD-fed mice by using Y-maze, passive avoidance, and morris water maze (MWM) tests. Further, Irf2bp2-deficiency accelerated the activation of astrocytes and microglia cells, as evidenced by the promoted expressions of glial fibrillary acidic protein (GFAP) and Iba-1 in hippocampus and hypothalamus of HFD-fed mice. HFD for 16 weeks induced oxidative stress in serum and brain of mice, as proved by the up-regulated malondialdehyde (MDA) levels and down-regulated superoxide dismutase (SOD) activity, which were significantly enhanced due to Irf2bp2 knockout. Moreover, HFD-triggered systematic and central nervous inflammation by increasing the release of interleukin 1β (IL-1β) and tumor necrosis factor (TNF)-α, accompanied with elevated p-nuclear factor-κB (NF-κB) expressions. Notably, HFD-induced inflammation was significantly exacerbated by Irf2bp2 deletion. Intriguingly, HFD-induced dyslipidemia in liver of mice was further aggravated by Irf2bp2 suppression. Our in vitro results verified the effects of Irf2bp2-inhibition on the promotion of inflammatory response in BV2 cells and lipid dysfunction in primary hepatocytes. Therefore, the findings above suggested that inhibiting Irf2bp2 expression provided a potential therapeutic approach for the prevention of metabolic syndrome-associated central nervous injury.

60 APPLIED LIFE SCIENCES↗

Evaluation of adsorption and mechanical strength of 13X zeolite mixtures with phyllosilicate binders using molecular dynamics simulation and positron annihilation spectroscopy

There is growing interest in developing zeolites with novel internal structures that have optimal adsorptive capacity and high mechanical strength, while offering advantages, such as being light weight. We integrate computational and experimental methods to explore the effect of binder/zeolite types, and weight percentages on the mechanical strength of 13X zeolite and adsorption capacities of N 2 , H 2 O, and CO 2 for additive manufacturing (AM) applications with the goal of maximizing both adsorption and strength. Zeolite 13X mixtures and phyllosilicate binders (either bentonite or kaolin) are combined using molecular dynamics (MD) simulations to create structures with various binder/zeolite weight percentages. Further, adsorption capabilities and mechanical strength are assessed using the grand canonical Monte Carlo (GCMC) and ReaxFF modules, respectively. Our modeling shows that an optimized zeolite/binder ratio for N 2 adsorption is around 15 wt% for kaolin and roughly 10 wt% for bentonite. The resulting parameters can be applied to facilitate macro-scale computational fluid dynamics (CFD) and finite element method (FEM) simulations of an AM zeolite structure. We also performed Positron Annihilation Lifetime Spectroscopy (PALS) measurements on zeolite samples to explore the effect of changes in the internal volume. The results show an inverse relationship between the free volume and the solid loading and adding a binder changes the morphology of the zeolite-binder compound and decreases open-volume area significantly.

36 MATERIALS SCIENCE↗

Palliative Radiation Therapy for Advanced Head and Neck Carcinomas: A Phase 2 Study

Purpose: Incurable head and neck cancer is hard to manage with usual palliative care. Radiation therapy (RT) in this setting is sometimes omitted because there is an apprehension that the side effects in the head and neck region might counterbalance the benefits. The objective of this phase 2 study was to evaluate whether highly conformal RT could improve the therapeutic ratio with this comprehensive Quality of Life (QOL) and toxicity evaluation. Methods and Materials: Patients from 2 academic centers, deemed unfit for radical treatment because of their poor medical condition or advanced cancer stage by an experienced tumor board, were offered 25 Gy in 5 daily intensity modulated RT fractions over 1 week to the symptomatic tumor volume. QOL was evaluated with the European Organization for Research and Treatment of Cancer QLQ-C15-PAL and QLQ-H&N35 questionnaires, and toxicities with the Common Terminology Criteria for Adverse Events version 4.0. Survival and time to tumor progression were calculated with the Kaplan-Meier method. Results: Thirty-two patients were recruited, of whom 66% had at least T4, N3, or M1 disease. The QOL questionnaires completion rate was 86%. Eighty-eight percent of patients received the planned dose. The median overall survival and progression-free survival times were, respectively, 6.5 and 3.2 months. No grade 4 or 5 toxicity was seen. Only 13% of patients had any grade 3 toxicities, and 17% of patients reported no toxicity at all. The QOL was equal or improved, and head and neck symptoms remained equal to or lower than the baseline values for most patients at up to 6 months. Eighty-five percent of patients would have chosen to receive this RT regimen again when asked. Conclusions: This palliative RT regimen was highly tolerable and effective in preserving or improving self-reported QOL in most patients for up to 6 months, which corresponds to this population's median overall survival. Given the minimal side effects, intensification could be considered to achieve longer locoregional control.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Effects of quench rate and natural ageing on the age hardening behaviour of aluminium alloy AA6060

Quench sensitivity in Al–Mg–Si alloys has been largely attributed to the solute loss at the heterogeneous nucleation sites, primarily dispersoids, during slow cooling after extrusion. As such, the number density of dispersoids, the solute type and concentration are considered to be the key variables for the quench sensitivity. In this study, quench sensitivity and the influence of natural ageing in a lean Al–Mg–Si alloy, AA6060, which contains few dispersoids, have been investigated by hardness measurement, thermal analysis, transmission electron microscopy (TEM) and positron annihilation lifetime spectroscopy (PALS). It is shown that the quench sensitivity in this alloy is associated with the degree of supersaturation of vacancies after cooling. Due to vacancy annihilation and clustering during natural ageing, the quench sensitivity is more pronounced after a short natural ageing time (30 min) compared to a longer natural ageing time (24 h). Therefore, prolonged natural ageing not only leads to an increase in hardness, but can also have a positive effect on the quench sensitivity of lean Al–Mg–Si alloys. - Highlights: • Significant quench sensitivity observed in AA6060 alloy after 30 min natural ageing • Prolonged natural ageing increased hardness and reduced QS. • Low dispersoid density leads to insignificant QS from non-hardening precipitates. • Vacancy supersaturation identified as a contributor to QS.

36 MATERIALS SCIENCE↗

Synthesis and characterization of aluminophosphate glasses with unique blue emission

Highlights: • Unique blue emission from aluminophosphate glass due to the phosphorus defect. • Tune the blue emission intensity by addition of SiO{sub 2}, ZnF{sub 2}, or Li{sub 2}O to the base glass. • Study the structural defects in the glass by PALS. • Energy transfer from phosphorus defect to Mn{sup 2+} in Mn-doped aluminophosphate glass. - Abstract: The aluminophosphate glasses were prepared by the melting-quenching technique and their optical and structural properties were investigated. The 56P{sub 2}O{sub 5}-20Al{sub 2}O{sub 3} glass exhibits unique blue emission at 406 nm due to the phosphorus defect in the glass matrix. Addition of SiO{sub 2}, ZnF{sub 2}, or Li{sub 2}O to 56P{sub 2}O{sub 5}-20Al{sub 2}O{sub 3} glass matrix has different influence on formation of phosphorus defect resulting in different intensities of blue emission at 406 nm, though SiO{sub 2}, ZnF{sub 2} or Li{sub 2}O mostly enters the glass network as modifier. Structural analysis of P{sub 2}O{sub 5}-Al{sub 2}O{sub 3} based aluminophosphate glasses by positron annihilation lifetime spectroscopy indicates that values of positron lifetimes and the corresponding intensities may be connected with the sizes and number of structural defects. Under excitation of 251 nm, a broad blue emission band and a red emission band were observed in the Mn-doped 56P{sub 2}O{sub 5}-20Al{sub 2}O{sub 3}-15SiO{sub 2}-10ZnF{sub 2} glass, indicating the operation of energy transfer from the phosphorus defect to octahedrally coordinated Mn in the glass host.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural, optical and photocatalytic properties of zinc oxides obtained from spent alkaline batteries

Highlights: • Zinc oxides were synthetized using spent alkaline batteries as raw materials. • Both prepared samples present the wurzite structure and exhibits good optical properties. • The decrease in lattice parameters and the narrow band gap are associated with the formation of oxygen vacancies. • Recovered zinc oxides were active for photodegradation of methylene blue by UV irradiation. • The photocatalytic was correlates to the bulk/surface defects ratio. - Abstract: The structural, optical and photocatalytic properties of two zinc oxides prepared from spent alkaline batteries were analysed. After leaching the anode of alkaline batteries, zinc was precipitated from the leachate liquor by introducing oxalic acid (O-ZnO) or sodium carbonate (C-ZnO). The structure of ZnO samples were analysed by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), S{sub BET}, DRS-UV-vis spectroscopy and positron annihilation lifetime spectroscopy (PALS). Both oxides present the ZnO wurzite structure and similar morphology. C-ZnO presents a cell lower lattice parameters and bang gap energy (2.99 eV) than O-ZnO (3.05 eV), possibly due to higher concentration of oxygen vacancies. The photocatalytic activity in the degradation of methylene blue (MB) of O-ZnO (achieving 70% MB degradation at 90 min) was superior to C-ZnO, due to its higher surface area and degree of crystallinity and lower bulk/surface defects ratio.

36 MATERIALS SCIENCE↗

New Class of Type III Porous Liquids: A Promising Platform for Rational Adjustment of Gas Sorption Behavior

Porous materials have already manifested their unique properties in a number of fields. Generally, all porous materials are in a solid state other than liquid, in which molecules are closely packed without porosity. “Porous” and “liquid” seem like antonyms. In this paper, we report a new class of Type 3 porous liquids based on rational coupling of microporous framework nanoparticles as porous hosts with a bulky ionic liquid as the fluid media. Positron annihilation lifetime spectroscopy (PALS) and CO 2 adsorption measurements confirm the successful engineering of permanent porosity into these liquids. Compared to common porous solid materials, as-synthesized porous liquids exhibited pronounced hysteresis loops in the CO 2 sorption isotherms even at ambient conditions (298 K, 1 bar). Finally, the unique features of these novel porous liquids could bring new opportunities in many fields including gas separation and storage, air separation and regeneration, gas transport, and permanent gas storage at ambient conditions.

36 MATERIALS SCIENCE↗

High-Throughput Characterization and Optimization of Polyamide Hydrolase Activity Using Open Port Sampling Interface Mass Spectrometry

Enzymatic biodegradation of polymers, such as polyamides (PA), has the potential to cost-effectively reduce plastic waste, but enhancements in degradation efficiency are needed. Engineering enzymes through directed evolution is one pathway toward identification of critical domains needed for improving activity. However, screening such enzymatic libraries (100s-to-1000s of samples) is time-consuming. Here we demonstrate the use of robotic autosampler (PAL) and immediate drop on demand technology (I.DOT) liquid handling systems coupled with open-port sampling interface-mass spectrometry (OPSI-MS) to screen for PA6 and PA66 hydrolysis by 6-aminohexanoate-oligomer endo-hydrolase (nylon hydrolase, NylC) in a high-throughput (8–20 s/sample) manner. The OPSI-MS technique required minimal sample preparation and was amenable to 96-well plate formats for automated processing. Enzymatic hydrolysis of PA characteristically produced soluble linear oligomer products that could be identified by OPSI-MS. Incubation temperatures and times were optimized for PA6 (65 °C, 24 h) and PA66 (75 °C, 24 h) over 108 experiments. In addition, the I.DOT/OPSI-MS quantified production of PA6 linear dimer (8.3 ± 1.6 μg/mL) and PA66 linear monomer (13.5 ± 1.5 μg/mL) by NylC with a lower limit of detection of 0.029 and 0.032 μg/mL, respectively. For PA6 and PA66, linear oligomer production corresponded to 0.096 ± 0.018% and 0.204 ± 0.028% conversion of dry pellet mass, respectively. The developed methodology is expected to be utilized to assess enzymatic hydrolysis of engineered enzyme libraries, comprising hundreds to thousands of individual samples.

47 OTHER INSTRUMENTATION↗

An overview of selected current approaches to the characterization of aqueous inorganic clusters

This Perspective article highlights some of the traditional and non-traditional analytical tools that are currently used to characterize aqueous inorganic nanoscale clusters and polyoxometalate ions. The techniques discussed in this article include nuclear magnetic resonance spectroscopy (NMR), small angle X-ray scattering (SAXS), dynamic and phase analysis light scattering (DLS and PALS), Raman spectroscopy, and quantum mechanical computations (QMC). For each method we briefly describe how it functions and illustrate how these techniques are used to study cluster species in the solid state and in solution through several representative case studies. In addition to highlighting the utility of these techniques, we also discuss limitations of each approach and measures that can be applied to circumvent such limits as it pertains to aqueous inorganic cluster characterization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Intense Slow Positron Beam Facility at the NC State University PULSTAR Reactor

An intense slow positron beam is in its early stages of operation at the 1-MW open-pool PULSTAR research reactor at North Carolina State University. The positron beam line is installed in a beam port that has a 30-cmx30-cm cross sectional view of the core. The positrons are created in a tungsten converter/moderator by pair-production using gamma rays produced in the reactor core and by neutron capture reactions in cadmium cladding surrounding the tungsten. Upon moderation, slow ({approx}3 eV) positrons that are emitted from the moderator are electrostatically extracted, focused and magnetically guided until they exit the reactor biological shield with 1-keV energy, approximately 3-cm beam diameter and an intensity exceeding 6x10{sup 8} positrons per second. A magnetic beam switch and transport system has been installed and tested that directs the beam into one of two spectrometers. The spectrometers are designed to implement state-of-the-art PALS and DBS techniques to perform positron and positronium annihilation studies of nanophases in matter.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Single crystal silicon carbide detector of emitted ions and soft x rays from power laser-generated plasmas

A single-crystal silicon carbide (SiC) detector was used for measurements of soft x rays, electrons, and ion emission from laser-generated plasma obtained with the use of the Prague Asterix Laser System (PALS) at intensities of the order of 10{sup 16} W/cm{sup 2} and pulse duration of 300 ps. Measurements were performed by varying the laser intensity and the nature of the irradiated target. The spectra obtained by using the SiC detector show not only the photopeak due to UV and soft x-ray detection, but also various peaks due to the detection of energetic charged particles. Time-of-flight technique was employed to determine the ion kinetic energy of particles emitted from the plasma and to perform a comparison between SiC and traditional ion collectors. The detector was also employed by inserting absorber films of different thickness in front of the SiC surface in order to determine, as a first approximation, the mean energy of the soft x-ray emission from the plasma.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Measurements of the highest acceleration gradient for ions produced with a long laser pulse

Ultrafast plasma light ion streams have been produced using the 300 ps, kJ-class iodine laser, operating at PALS Centre in Prague. Ion detection was performed through standard ion collectors (IC) in time-of-flight configuration (TOF), shielded by thin metallic absorbers. This new diagnostics technique has been theoretically studied and experimentally tested in order to cut the long photopeak contribution and to analyze the ultrafast particle signal. Processing the obtained experimental IC-TOF data, including deconvolution processes of the TOF signals, UV/soft-x-ray photopeak absorption, and ion transmission calculations for different metallic filters, is shown. Mainly amorphous carbon (graphite) targets have been irradiated in order to limit the maximum number of ion charge states and to focus our study on demonstrating the validity of the proposed investigation technique. Maximum ion energy and acceleration gradient estimations as a function of the laser energy and focal spot diameter are reported.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Note: Construction of x-ray scattering and x-ray absorption fine structure beamline at the Pohang Light Source

A new hard x-ray beamline, 10B KIST-PAL beamline (BL10B), has been designed and constructed at the Pohang Light Source (PLS) in Korea. The beamline, operated by Pohang Accelerator Laboratory-Korean Institute of Science and Technology consortium, is dedicated to x-ray scattering (XRS) and x-ray absorption fine structure (XAFS) experiments. X rays with photon energies from 4.0 to 16.0 keV are delivered to the experimental station passing a collimating mirror, a fixed-exit double-crystal Si(111) monochromator, and a toroidal mirror. Basic experimental equipments for XAFS measurement, a high resolution diffractometry, an image plate detector system, and a hot stage have been prepared for the station. From our initial commissioning and performance testing of the beamline, it is observed that BL10B beamline can perform XRS and XAFS measurements successfully.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗