Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Optical Microscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Quantum Enhanced Probes of Magnetic Circular Dichroism

Magneto-optical microscopies, including optical measurements of magnetic circular dichroism, are increasingly ubiquitous tools for probing spin-orbit coupling, charge-carrier g-factors, and chiral excitations in matter, but the minimum detectable signal in classical magnetic circular dichroism measurements is fundamentally limited by the shot-noise limit of the optical readout field. Here, a two-mode squeezed light source is used to improve the minimum detectable signal in magnetic circular dichroism measurements by 3 decibels compared with state-of-the-art classical measurements, even with relatively lossy samples like terbium gallium garnet. Furthermore, these results provide a framework for new quantum-enhanced magneto-optical microscopies that are particularly critical for environmentally sensitive materials and for low temperature measurements where increased optical power can introduce unacceptable thermal perturbations.

42 ENGINEERING↗

Synthesis, characterization and optical properties of hybrid PVA–ZnO nanocomposite: A composition dependent study

Graphical abstract: - Highlights: • ZnO nanoparticles were prepared by solution combustion method. • PVA–ZnO nanocomposites were synthesized by solution casting method. • Doped and undoped films were characterized using different techniques. • Red shift in optical band gap was observed in Nanocomposite films with respect to nano ZnO. • Photoluminescence intensity was found to be optimum for PVA–10 mol% ZnO nanocomposite film. - Abstract: Nanocomposites of poly vinyl alcohol (PVA) and ZnO have been synthesized using the solution casting technique for different concentrations of nano ZnO powder prepared by low temperature solution combustion method. The formation of polymer nanocomposite and changes in the structural and micro structural properties of the materials were investigated by X-ray diffraction, Energy dispersive X ray spectroscopy and optical microscopy techniques (FTIR and UV–Visible). The surface morphology of PVA–ZnO nanocomposite films were elucidated using Scanning Electron Microscopy. The optical absorption spectrum of nano ZnO shows blue shift in the optical band gap energy with respect to characteristic bulk ZnO at room temperature, whereas PVA–ZnO hybrid films show red shift with respect to nano ZnO. The photoluminescence studies show that the intensity of the blue emission (470 nm) varies with change in concentration of ZnO with an optimum intensity observed at 10 mol% of ZnO.

36 MATERIALS SCIENCE↗

Surface Topography of 'Hotspot' Regions from a Single Cell SRF Cavity

Performance of SRF cavities are limited by non-linear localized effects. The variation of local material characters between "hot" and "cold" spots is thus of intense interest. Such locations were identified in a BCP-etched large-grain single-cell cavity and removed for examination by high resolution electron microscopy (SEM), electron-back scattering diffraction microscopy (EBSD), optical microscopy, and 3D profilometry. Pits with clearly discernable crystal facets were observed in both "hotspot" and "coldspot" specimens. The pits were found in-grain, at bi-crystal boundaries, and on tri-crystal junctions. They are interpreted as etch pits induced by surface crystal defects (e.g. dislocations). All "coldspots" examined had qualitatively low density of etching pits or very shallow tri-crystal boundary junction. EBSD revealed the crystal structure surrounding the pits via crystal phase orientation mapping, while 3D profilometry gave information on the depth and size of the pits. In addition, a survey of the samples by energy dispersive X-ray analysis (EDX) did not show any significant contamination of the samples surface.

36 MATERIALS SCIENCE↗

Effects of Al-5Ti-1B master alloy on the microstructural evaluation of a highly alloyed aluminum alloy produced by SIMA process

This study was undertaken to investigate the influence of Al-5Ti-1B master alloy on the structural characteristics of Al-12Zn-3 Mg-2.5Cu aluminum alloy. The optimum amount of Ti containing master alloy for proper grain refining was selected as 6 wt.%. A modified strain-induced, melt-activated (SIMA) process for semi-solid processing of alloys was proposed. In order to examine the effectiveness of the modified SIMA process, the recrystallized microstructures of the Al alloy (Al-12Zn-3 Mg-2.5Cu) prepared by the modified SIMA processes were macroscopically. The modified SIMA process employed casting, warm multi-forging, recrystallization and partial melting instead of the conventional process. Reheating condition to obtain a fine globular microstructure was optimized. The microstructure evolution of reheated Al-12Zn-3 Mg-2.5Cu aluminum alloy was characterized by SEM (Scanning electron microscopy) and optical microscopy. In this study the relation between the induced strain with size and shape of grain size has been studied. Results indicated that with the increase of strain sphericity of particles, their size decreases and sphericity takes place in less reahiting time.

36 MATERIALS SCIENCE↗

Ultra-Fine Grain Structures Of Model Al-Mg-Si Alloys Produced By Hydrostatic Extrusion

Microstructure and mechanical properties were studied in model Al-Mg-Si alloys (Al-1 % Mg-0.8% Si and Al-0.5% Mg-0.3% Si-wt %) deformed by hydrostatic extrusion (HE) to strains of 1.4 and 3.8. In these alloys the different percentage of two hardening second-phase precipitates (Mg{sub 2}Si and Si) were observed. The microstructure was characterized by transmission electron microscopy and optical microscopy. The microstructure of the alloys in the initial state was built of coarse grains of an average diameter of {approx}30 rim. The refined microstructure was examined qualitatively and quantitatively using the stereological method and a computer image analysis. The deformation-processed structures evolved very rapidly, forming ultrafine grained (UFG) materials with grains of about 0.4 {mu}m. In addition, the grain refinement in the HE-treated materials has a substantial effect on their properties, such as the mechanical strength and micro-hardness which increase significantly. It has been found that, after {epsilon} = 3.8 in the Al-1% Mg-0.8% Si alloy, the micro-hardness increases approximately twofold. The yield stress is more than four times higher in the UFG alloys, in comparison to the initial state. Similar results were identified in the Al-0.5% Mg-0.3% Si. This is due to the very rapid refinement of the microstructure during the deformation and presence of second-phase particles.

36 MATERIALS SCIENCE↗

Study of the self-organization processes in lead sulfide quantum dots

A procedure is described for the synthesis of nanoparticles based on lead chalcogenides. The procedure combines the synthesis of colloidal quantum dots (QDs) in aqueous solutions with simultaneous organization of the QDs into ordered arrays. The processes of the self-organization of QDs are analyzed at the nano- and microscopic levels by the photoluminescence method, atomic-force microscopy, and optical microscopy.

36 MATERIALS SCIENCE↗

High-pressure Study of Silane to 150 GPa

We present an extensive study of the optical, electronic, and structural properties of silane (SiH{sub 4}) to 150 GPa through the use of Raman spectroscopy, optical microscopy, synchrotron infrared reflectivity, optical absorption, and synchrotron x-ray diffraction measurements. To mitigate possible contamination from previously reported metal hydride formation, we performed experiments using gold-lined sample gaskets, finding molecular silane remains in the transparent and insulating P2{sub 1}/c structure until {approx}40 GPa. Silane shows a partial loss of crystallinity above {approx}50 GPa and appears to visibly darken. The darkening is plausibly the result of a loss of molecular character with many enthalpically competitive pathways available, including decomposition, combined with the absorptive nature of the sample. Above 100 GPa we observed crystallization into structures partially consistent with the previously reported nonmolecular I4{sup -} 2d and I4{sub 1}/a types. In the absence of decomposition, silane remains partially transparent and nonmetallic to at least 150 GPa with a band gap constrained between 0.6 and 1.8 eV. Under pressure, silane is sensitive to irradiation from x-rays and lasers, and may easily decompose into metallic silicon. We suggest that previous reports of metallization starting from molecular SiH{sub 4} arise from decomposition, and superconductivity may originate from hydrogen-doped silicon. While silane may readily decompose, the inherent metastability provides access to a wide range of path- and sample-history-dependent states and suggests a unique range of physical properties for hydrogen-rich silicon alloys.

36 MATERIALS SCIENCE↗

Light-Induced Macroscopic Peeling of Single Crystal Driven by Photoisomeric Nano-Optical Switching

Single-crystal optical actuators are emerging as a prospective material form for nano-optical mechanical switching, sensing, or transduction device applications in nano-technology and quantum technology. Crystal-lattice strain effects lie at the molecular origins of their macroscopic optical behavior, and linkage photoisomerization is an attractive source of optical actuation if only suitably functioning materials of this ilk could be found. In this work, we discover η 1 -SO 2 to η 1 -OSO single-crystal linkage photoisomerization in [Ru(NH 3 ) 4 (SO 2 )(3-phenylpyridine)]Cl 2 ·H 2 O, which behaves macroscopically as a single-crystal optical actuator, whereby the crystal peels in response to light-induction at 100 K. It thermally recovers, whereupon the crystal exhibits remarkable restorative properties. We apply photocrystallography alongside concerted optical microscopy and optical absorption spectroscopy to reveal how the molecular origins of photoisomerization induce crystal-lattice strain that engenders this macroscopic crystal peeling effect. Finally, linking structure and function across molecular and macroscopic length scales showcases a means by which single-crystal optically actuating materials could be systematically designed.

36 MATERIALS SCIENCE↗

Ultrasound – A new approach for non-woven scaffolds investigation

In this study we verified the method of impulse acoustic microscopy as a tool for scaffold evaluation in tissue engineering investigation. Cellulose diacetate (CDA) non-woven 3D scaffold was used as a model object. Scanning electron microscopy and optical microscopy were used as reference methods in order to realize feasibility of acoustic microscopy method in a regenerative medicine field. Direct comparison of the different methods was carried out.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Simultaneous differential spinning disk fluorescence optical sectioning microscopy and nanomechanical mapping atomic force microscopy

Combined microscopy techniques offer the life science research community a powerful tool to investigate complex biological systems and their interactions. Here, we present a new combined microscopy platform based on fluorescence optical sectioning microscopy through aperture correlation microscopy with a Differential Spinning Disk (DSD) and nanomechanical mapping with an Atomic Force Microscope (AFM). The illumination scheme of the DSD microscope unit, contrary to standard single or multi-point confocal microscopes, provides a time-independent illumination of the AFM cantilever. This enables a distortion-free simultaneous operation of fluorescence optical sectioning microscopy and atomic force microscopy with standard probes. In this context, we discuss sample heating due to AFM cantilever illumination with fluorescence excitation light. Integration of a DSD fluorescence optical sectioning unit with an AFM platform requires mitigation of mechanical noise transfer of the spinning disk. We identify and present two solutions to almost annul this noise in the AFM measurement process. The new combined microscopy platform is applied to the characterization of a DOPC/DOPS (4:1) lipid structures labelled with a lipophilic cationic indocarbocyanine dye deposited on a mica substrate.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Role of different compatibilizing approaches on the microstructure and mechanical properties of polypropylene/talc composites

Since in a highly filled polymer, a major problem arises from non-uniformity of properties due to the poor dispersion of filler, the application of coupling agents have been directed to overcome this problem and also to enhance the mechanical performance of the composites by improving the adhesion at the interface. In this study, a comparison between two major coupling approaches is conducted: 1) Using PPgMA as a kind of compatibilizer which changes the nature of the matrix, 2) Using titanate coupling agent which takes action at the interface and reacts with hydroxyl groups at the inorganic filler surface, resulting in the formation of monomolecular layer on the inorganic surface to increase compatibility of filler/matrix interface. The comparison is made based on the mechanical properties of the composites by means of elastic modulus, yield stress, impact strength and percentage of strain-to-fracture and evaluation of their effects on both the dispersion and adhesion of talc plates in the matrix through the microscopy. Transmission optical microscopy (TOM) and scanning electron microscopy (SEM) are used to observe the deformation micromechanism and the fracture surface of the composites, respectively.

36 MATERIALS SCIENCE↗

Thermoelectric properties of Bi{sub 2}Te{sub 2.4}Se{sub 0.6} solid solutions of different particle-size composition

The thermoelectric properties of n-type Bi{sub 2}Te{sub 2.4}Se{sub 0.6} solid solution prepared by the vacuum hot pressing of powder mixtures with different particle sizes are investigated. The powders were prepared by the mechanical grinding of ingots and melt spinning. The microstructure and fracture pattern of a sample cleavage surface are analyzed using scanning electron microscopy and optical microscopy. The thermoelectric characteristics (the Seebeck coefficient, electrical conductivity, and thermal conductivity) are measured at room temperature and in the temperature range of 100–700 K.

36 MATERIALS SCIENCE↗

Crystallization kinetics in electron-beam evaporated amorphous silicon on ZnO:Al-coated glass for thin film solar cells

To systematically study the crystallization process of electron-beam evaporated amorphous silicon on ZnO:Al-coated glass for polycrystalline silicon thin film solar cells, transmission electron microscopy and optical microscopy were employed. A time and temperature dependent analysis allowed the individual investigation of the growth and nucleation processes. The growth velocities of Si-crystals on ZnO:Al and SiN-coated glass were found to be identical within the investigated temperature regime of 500-600 deg. C. However, with a high steady state nucleation rate and a low activation energy, the nucleation process of Si on ZnO:Al-coated glass has shown to differ significantly from nucleation on glass.

36 MATERIALS SCIENCE↗

Kinetics of borided 31CrMoV9 and 34CrAlNi7 steels

In this study, kinetics of borides formed on the surface of 31CrMoV9 and 34CrAlNi7 steels borided in solid medium consisting of Ekabor II at 850-900-950 deg. C for 2, 4, 6 and 8 h were investigated. Scanning electron microscopy and optical microscopy examinations showed that borides formed on the surface of borided steels have columnar morphology. The borides formed in the coating layer confirmed by X-ray diffraction analysis are FeB, Fe{sub 2}B, CrB, and Cr{sub 2}B. The hardnesses of boride layers are much higher than that of matrix. It was found that depending on process temperature and time the fracture toughness of boride layers ranged from 3.93 to 4.48 MPa m{sup 1/2} for 31CrMoV9 and from 3.87 to 4.40 MPa m{sup 1/2} for 34CrAlNi7 steel. Activation energy, growth rate and growth acceleration of boride layer calculated according to these kinetic studies revealed that lower activation energy results in the fast growth rate and high growth acceleration.

36 MATERIALS SCIENCE↗

Microstructure of surface cerium hydride growth sites

Samples of cerium were exposed to hydrogen under controlled conditions causing cerium hydride sites to nucleate and grow on the surface. The hydriding rate was measured in situ, and the hydrides were characterised using secondary ion mass spectrometry, scanning electron microscopy, and optical microscopy. The results show that the hydriding rate proceeded more quickly than earlier studies. Characterisation confirmed that the hydrogen is confined to the sites. The morphology of the hydrides was confirmed to be oblate, and stressed material was observed surrounding the hydride, in a number of cases lathlike features were observed surrounding the hydride sites laterally with cracking in the surface oxide above them. It is proposed that during growth the increased lattice parameter of the CeH{sub 2} induces a lateral compressive stress around the hydride, which relieves by the ca. 16% volume collapse of the γ-Ce to α-Ce pressure induced phase transition. Cracking of the surface oxide above the laths reduces the diffusion barrier to hydrogen reaching the metal/oxide interface surrounding the hydride site and contributes to the anisotropic growth of the hydrides.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of the thickness on properties of Al{sub 2}O{sub 3} coatings deposited by plasma spraying

Al{sub 2}O{sub 3} coatings with different thicknesses (160, 320, 480 and 640 {mu}m) were deposited on stainless steel substrate by plasma spraying. The variation in microstructural characteristics and properties of coatings with various thicknesses was investigated. Powders morphology and the microstructure of as-sprayed coatings were characterized by scanning electron microscopy and optical microscopy. The microhardness was measured using a Vickers' indentor. The corrosion behaviour of plasma-sprayed Al{sub 2}O{sub 3} coatings in 1 N H{sub 2}SO{sub 4} solution at a temperature of 25 deg. C was evaluated by electrochemistry method. Experimental results indicated that surface roughness showed no obvious dependence on the coating thickness. However, the porosity of Al{sub 2}O{sub 3} coating was increased with increased thickness. The enhanced coating thickness also resulted in decreasing microhardness and reduced corrosion resistance. In this study, the Al{sub 2}O{sub 3} coating with thickness of 160 {mu}m possesses the lowest porosity, the highest hardness and superior corrosion resistance. Research Highlights: {yields} Increase of coating thickness shows no obvious effect on phase composition and surface roughness of plasma sprayed Al{sub 2}O{sub 3} coatings. {yields} Variation of porosity and microhardness presents dependence on coating thickness parameter. {yields} Increasing coating thickness leads to reduced corrosion resistance of plasma sprayed Al{sub 2}O{sub 3} coating.

36 MATERIALS SCIENCE↗

Effect of Cooling Rate on Microsegregation During Solidification of Superalloy INCONEL 718 Under Slow-Cooled Conditions

The solidification sequence, microstructural evolution, solid-liquid interface variation, interdendritic segregation, and elemental distribution of as-cast IN718 alloy at three slow-cooling rates (5, 10, and 20 °C/min) were investigated by differential scanning calorimetry (DSC), confocal laser scanning microscopy (CLSM), optical microscopy (OM), field-emission scanning electron microscopy (FESEM), and electron-probe microanalysis (EPMA) techniques. The results indicate that as the cooling rate decreases, the constitutional supercooling at the solidification front affects the solid-liquid interface more significantly, and the size and quantity of the Laves phase increase. However, the composition of the Laves phase is insensitive to the cooling rate in the range of conditions studied here. In dendrite core, the contents of Ni, Cr, Fe, and Al follow a slight downward trend with an increasing cooling rate, whereas the Nb, Mo, and Ti contents show an upward trend. Additionally, Mo shows a stronger propensity to segregate under slow-cooling conditions because its effective partition coefficient almost linearly decreased with decreasing cooling rate, which is same as Nb. Using the parameters experimentally determined in this study and the Clyne–Kurz equation, we achieved reasonable agreement between the calculated and measured liquid composition change during the solidification process at different cooling rates. All experimental and theoretical programs in this research were undertaken with the aim of gaining further understanding of the microsegregation behaviors in large-scale IN718 ingots, whose cooling rates are within a lower range.

36 MATERIALS SCIENCE↗

Characterization and control of crystal nucleation in amorphous electron beam evaporated silicon for thin film solar cells

The kinetics of crystal nucleation in high-rate electron beam evaporated amorphous Si for polycrystalline thin film solar cells was systematically studied on SiN and selected ZnO:Al-coated glass substrates with dissimilar surface topographies by employing Raman spectroscopy, transmission electron microscopy, and optical microscopy. The influence of the surface topography of the substrate and the disorder of the deposited amorphous Si could be correlated to the respective characteristics of the transient and steady state regime of the nucleation rate. The steady state nucleation rate I{sub ss}, its corresponding activation energy E{sub Iss}, and consequently the size of the grains in the crystallized Si were found to be governed by the interplay between the surface roughness and the deposition temperature. The steady state nucleation rate I{sub ss} increased gradually upon increasing the substrate roughness, while lowering the deposition temperature of the amorphous Si on rough textures resulted in a decline of I{sub ss}. The time-lag {tau}, which represents a distinctive parameter for the transient regime, was only slightly affected by the substrate topography. The deposition temperature, however, had a significant influence on {tau}, with {tau} increasing by a factor of 8 upon lowering the deposition temperature from 300 to 200 deg. C for all substrate topographies. These characteristics could be correlated with the increasing structural disorder of the deposited a-Si upon decreasing the deposition temperature. Based on this analysis, we could determine design rules for the controlled preparation of large-grained poly-Si in minimized processing time on any of the used substrate types by individually adjusting the deposition temperature and implementing nucleation layers.

36 MATERIALS SCIENCE↗