Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Operation optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS2018

An Analysis of the Lightning Jump Algorithm Using Geostationary Lightning Mapper Flashes

This project aims to implement the two-sigma lightning jump algorithm (LJA) developed using Lightning Mapping Arrays (LMAs), with GOES-16 Geostationary Lightning Mapper (GLM) flashes, evaluate its performance, and identify any needed adjustments to the algorithm to optimize operational skill. The GLM is projected to have lower detection efficiency (DE) (70-90 percent) than operational LMAs (95-99 percent). The reduced GLM DE coupled with the coarser spatial resolution of the GLM could have impacts on flash rates and trends that could affect the LJA in various ways. Deep dives are conducted on four separate cases. Three of four cases show LMAs seeing two to three times as many flashes as the GLM. Only fifteen of twenty five GLM jumps saw increases in radar intensity while fourteen of nineteen LMA jumps did. These results suggest a larger sample sized study must be conducted to determine how to implement the LJA with the GLM.

Curtis, Nathan↗
NASA NTRSDate not supplied

Learning Based Edge Computing in Air-to-Air Communication Network

This paper studies learning-based edge computing and communication in a dynamic Air-to-Air Ad-hoc Network (AAAN). Due to spectrum scarcity, we assume the number of Air-to-Air (A2A) communication links is greater than that of the available frequency channels, such that some communication links have to share the same channel, causing co-channel interference. We formulate the joint channel selection and power control optimization problem to maximize the aggregate spectrum utilization efficiency under resource and fairness constraints. A distributed deep Q learning-based edge computing and communication algorithm is proposed to find the optimal solution. In particular, we design two different neural network structures and each communication link can converge to the optimal operation by exploiting only the local information from its neighbors, making it scalable to large networks. Finally, experimental results demonstrate the effectiveness of the proposed solution in various AAAN scenarios.

Zhe Wang↗
NASA NTRS2022

Electrodeionization Salt Removal from Water

This project developed a method to selectively extract sodium (Na) from complex, mission-relevant wastewaters using electricity as a driving force. The team investigated capacitive deionization (CDI), which has been used for general desalination but not for selective removal of Na. Three tasks supported this overall aim: designing and building a reactor and electrodes, engineering absorption and desorption parameters, and investigating varying water compositions and sources. Potential benefits of this approach include integrating into existing Environmental Control & Life Support Systems (ECLSS) treatment trains, reducing salinity for hydroponic installations, and producing food preservatives. Significant accomplishments, including building new reactors and characterizing their optimal operations and applications, advance the frontier of in-situ resource utilization for planetary habitation.

Luke Roberson↗
NASA NTRSDate not supplied

Suited User Incident Tracking System

The Suited User Incident Tracking System (SUITS) tracks all suited exposures during terrestrial analog simulations and trainings with the objective of recording any related issues, pains, or discomforts that arise from the exposure. This information is vital for informing where, how, and why issues are occurring during suited extravehicular activity (EVA) training and operations. The outputs of SUITS will be the foundation for the newly formed Suited Anomaly Assessment Team (SAAT) which consists of a broad range of EVA stakeholders including suit engineers, biomechanists, ergonomists, flight surgeons, athletic trainers, and physiologists. This team has been formed to provide robust, wholistic solutions to suit anomalies and issues identified by SUITS. SUITS data collected from September 2017 to June 2022 was analyzed for issue frequency and severity for each body location and plotted to visualize where issues were occurring. Clustering techniques using a k-modes approach were also applied to the data set to generate profiles of populations that experienced issues in the suit and populations that did not. A key finding identified by the SUITs analysis was that suited issues translate from predominantly upper body areas in microgravity space suits and associated analog simulations to lower body areas in planetary space suits and analog simulations. In addition, specific injury frequency and severity metrics were identified that will help drive requirements for commercially provided space suits. The SAAT will continue to meet on a biannual basis to identify trends in issues and injuries from the SUITS database to evaluate and develop solution strategies where needed for the purposes of suit design, EVA operations optimization, injury characterization and mitigation, and personalized improvements for human-suit interactions.

K. Dolick↗
NASA NTRS1984

The structural optimization of a spreader bar for twin lift helicopter operations

An optimization study was performed to develop a minimum weight spreader bar to allow two helicopters to lift the same payload. With this arrangement, the maximum payload that can be lifted is almost doubled without the expense of designing and building a new helicopter. The concept has had some limited use by civil helicopter operators using small helicopters and has been demonstrated in large scale by two CH-54's which successfully lifted a total load of 20 ton. To this point, rather heavy available beams or tower structures have been used for the spreader bar. Since the weight of the bar not only detracts from payload but also adds to the logistics problem, there are more than the usual incentives to minimize weight. Since the design requirement is for classic beam column with uniform side loads resulting from bar weight and aerodynamic drag, the design problem is particularly amenable to optimization. A study has been performed at Sikorsky to establish the minimum weight for a spreader bar sized to carry a load equal to the capacity of two Army BLACK HAWK helicopters. Toward this end, a computer program was written to analyze the spreader bar deflections and stresses and coupled to the NASA developed CONMIN optimization routines.

Dobyns, A.↗
NASA NTRS1973

Optimization of control gain by operator adjustment

An optimal gain was established by measuring errors at 5 discrete control gain settings in an experimental set-up consisting of a 2-dimensional, first-order pursuit tracking task performed by subjects (S's). No significant experience effect on optimum gain setting was found in the first experiment. During the second experiment, in which control gain was continuously adjustable, high experienced S's tended to reach the previously determined optimum gain quite accurately and quickly. Less experienced S's tended to select a marginally optimum gain either below or above the experimentally determined optimum depending on initial control gain setting, although mean settings of both groups were equal. This quick and simple method is recommended for selecting control gains for different control systems and forcing functions.

Kruse, W.↗
NASA NTRS1982

Long-term energy capture and the effects of optimizing wind turbine operating strategies

Methods of increasing energy capture without affecting the turbine design were investigated. The emphasis was on optimizing the wind turbine operating strategy. The operating strategy embodies the startup and shutdown algorithm as well as the algorithm for determining when to yaw (rotate) the axis of the turbine more directly into the wind. Using data collected at a number of sites, the time-dependent simulation of a MOD-2 wind turbine using various, site-dependent operating strategies provided evidence that site-specific fine tuning can produce significant increases in long-term energy capture as well as reduce the number of start-stop cycles and yawing maneuvers, which may result in reduced fatigue and subsequent maintenance.

Miller, A. H.↗
NASA NTRS1972

Pilot/vehicle control optimization using averaged operational mode and subsystem relative performance index sensitivities

A method is presented for designing optimal feedback controllers for systems having subsystem sensitivity constraints. Such constraints reflect the presence of subsystem performance indices which are in conflict with the performance index of the overall system. The key to the approach is the use of relative performance index sensitivity (a measure of the deviation of a performance index from its optimum value). The weighted sum of subsystem and/or operational mode relative performance index sensitivies is defined as an overall performance index. A method is developed to handle linear systems with quadratic performance indices and either full or partial state feedback. The usefulness of this method is demonstrated by applying it to the design of a stability augmentation system (SAS) for a VTOL aircraft. A desirable VTOL SAS design is one that produces good VTOL transient response both with and without active pilot control. The system designed using this method is shown to effect a satisfactory compromise solution to this problem.

Leininger, G. G.↗
NASA NTRS1988

Optimization of silicon 8 cm x 8 cm wrapthrough Space Station cells for 'on orbit' operation

The optimization of Space Station cells for on-orbit performance is described. Design trades were performed in which back DAR coating thickness was traded against thermal absorptance and performance under front and back (albedo) illumination. Typical examples of modeled cell performance under different scenarios are given. Experimental illuminated output data under back illumination for specific DAR coating thicknesses are also given. Computer modeling of the solar array using TRASYS and SINDA programs also provide on-orbit thermal data and performance predictions. The overall backside response from albedo illumination was found to make a considerable contribution to the total array performance, particularly during the early stages of space station assembly when the arrays are feathered.

Lillington, D. R.↗
NASA NTRS2005

Cognitive Performance in Operational Environments

Optimal cognition during complex and sustained operations is a critical component for success in current and future military operations. "Cognitive Performance, Judgment, and Decision-making" (CPJD) is a newly organized U.S. Army Medical Research and Materiel Command research program focused on sustaining operational effectiveness of Future Force Warriors by developing paradigms through which militarily-relevant, higher-order cognitive performance, judgment, and decision-making can be assessed and sustained in individuals, small teams, and leaders of network-centric fighting units. CPJD evaluates the impact of stressors intrinsic to military operational environments (e.g., sleep deprivation, workload, fatigue, temperature extremes, altitude, environmental/physiological disruption) on military performance, evaluates noninvasive automated methods for monitoring and predicting cognitive performance, and investigates pharmaceutical strategies (e.g., stimulant countermeasures, hypnotics) to mitigate performance decrements. This manuscript describes the CPJD program, discusses the metrics utilized to relate militarily applied research findings to academic research, and discusses how the simulated combat capabilities of a synthetic battle laboratory may facilitate future cognitive performance research.

Russo, Michael↗
NASA NTRS2010

1-G Human Factors for Optimal Processing and Operability of Ground Systems up to CxP GOP PDR

During the mid stages of design development, up to Constellation Program (CxP) Preliminary Design Review (PDR), the requirements for leveraging I-G human factors for optimizing ground processing of Flight Hardware were mature for levels - 2, 3, 4, and 5. This paper gives an overview of the accomplishments achieved during that time. The main focus of this paper will be on the CxP Ground Operations Project human factors engineering analysis process using a Human Factors Engineering Analysis Tool (HFEAT) for developing the level- 5 requirements effecting the design development of the subsystems for Ground Support System (GSS), and Ground Support Equipment (GSE).

Stambolian, Damon B.↗
NASA NTRS1996

A New Coarsening Operator for the Optimal Preconditioning of the Dual and Primal Domain Decomposition Methods: Application to Problems with Severe Coefficient Jumps

We present an optimal preconditioning algorithm that is equally applicable to the dual (FETI) and primal (Balancing) Schur complement domain decomposition methods, and which successfully addresses the problems of subdomain heterogeneities including the effects of large jumps of coefficients. The proposed preconditioner is derived from energy principles and embeds a new coarsening operator that propagates the error globally and accelerates convergence. The resulting iterative solver is illustrated with the solution of highly heterogeneous elasticity problems.

Farhat, Charbel↗
NASA NTRS2004

Digital logic optimization using selection operators

According to the invention, a digital design method for manipulating a digital circuit netlist is disclosed. In one step, a first netlist is loaded. The first netlist is comprised of first basic cells that are comprised of first kernel cells. The first netlist is manipulated to create a second netlist. The second netlist is comprised of second basic cells that are comprised of second kernel cells. A percentage of the first and second kernel cells are selection circuits. There is less chip area consumed in the second basic cells than in the first basic cells. The second netlist is stored. In various embodiments, the percentage could be 2% or more, 5% or more, 10% or more, 20% or more, 30% or more, or 40% or more.

Whitaker, Sterling R.↗