Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Numerical Accuracy Improvement”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Elimination of Gibbs' phenomena from error analysis of finite element results

This paper is one of a series on error analysis and correction of finite element solutions for plates and shells. The error analysis in the earlier papers used half-range double Fourier sine series for numerical harmonic analysis. The half-range formulas are simple to apply, but they can be inaccurate near the ends of the ranges of the independent variables. The Gibbs' phenomenon exhibited by half-range sine series in one independent variable has a two-dimensional analog; a classic example is the Navier solution in a double half-range sine series for the simply supported plate under a uniform load. A simple change of variables is introduced in the paper to improve the accuracy of the double Fourier sine series without adding complexity to the numerical analysis. The change of variables is applied to the problem of approximating a transverse load that is tabulated on a rectangular grid. A solution based on the change of variables is compared with results from the Navier solution for the simply supported plate problem and finite element results for the same problem.

Thurston, Gaylen A.↗

On the accuracy of ERS-1 orbit predictions

Since the launch of ERS-1, the D-PAF (German Processing and Archiving Facility) provides regularly orbit predictions for the worldwide SLR (Satellite Laser Ranging) tracking network. The weekly distributed orbital elements are so called tuned IRV's and tuned SAO-elements. The tuning procedure, designed to improve the accuracy of the recovery of the orbit at the stations, is discussed based on numerical results. This shows that tuning of elements is essential for ERS-1 with the currently applied tracking procedures. The orbital elements are updated by daily distributed time bias functions. The generation of the time bias function is explained. Problems and numerical results are presented. The time bias function increases the prediction accuracy considerably. Finally, the quality assessment of ERS-1 orbit predictions is described. The accuracy is compiled for about 250 days since launch. The average accuracy lies in the range of 50-100 ms and has considerably improved.

Koenig, Rolf↗

FOREWORD: Satellite Remote Sensing Beyond 2015

Satellite remote sensing has progressed tremendously since the first Landsat was launched on June 23, 1972. Since the 1970s, satellite remote sensing and associated airborne and in situ measurements have resulted in vital and indispensable observations for understanding our planet through time. These observations have also led to dramatic improvements in numerical simulation models of the coupled atmosphere-land-ocean systems at increasing accuracies and predictive capability. The same observations document the Earth's climate and are driving the consensus that Homo sapiens is changing our climate through greenhouse gas emissions. These accomplishments are the combined work of many scientists from many countries and a dedicated cadre of engineers who build the instruments and satellites that collect Earth observation data from satellites, all working toward the goal of improving our understanding of the Earth. This edition of the Remote Sensing Handbook (Vol. I, II, and III) is a compendium of information for many research areas of our Planet that have contributed to our substantial progress since the 1970s. Remote sensing community is now using multiple sources of satellite and in situ data to advance our studies, what ever they might be. In the following paragraphs, I will illustrate how valuable and pivotal role satellite remote sensing has played in climate system study over last five decades, The Chapters in the Remote Sensing Handbook (Vol. I, II, and III) provides many other specific studies on land, water, and other applications using EO data of last five decades, The Landsat system of Earth-observing satellites has led the way in pioneering sustained observations of our planet. From 1972 to the present, at least one and sometimes two Landsat satellites have been in operation. Starting with the launch of the first NOAA-NASA Polar Orbiting Environmental Satellites NOAA-6 in 1978, improved imaging of land, clouds, and oceans and atmospheric soundings of temperature were accomplished. The NOAA system of polar-orbiting meteorological satellites has continued uninterrupted since that time, providing vital observations for numerical weather prediction. These same satellites are also responsible for the remarkable records of sea surface temperature and land vegetation index from the Advanced Very High Resolution Radiometers (AVHRR) that now span more than 33 years, although no one anticipated these valuable climate records from this instrument before the launch of NOAA-7 in 1981. The success of data from the AVHRR led to the design of the MODIS instruments on NASA's Earth Observing System of satellite platforms that improved substantially upon the AVHRR. The first of the EOS platforms, Terra, was launched in 2000 and the second of these platforms, Aqua, was launched in 2002.

Tucker, Compton J.↗

Steady supersonic Navier-Stokes solutions of a 75 deg delta wing

Steady solutions about a slender sharp edged delta wing in a supersonic freestream for moderate and high angles of attack are obtained numerically by time integration of the unsteady compressible three dimensional laminar Navier-Stokes equations. The main features of the flow, including primary and secondary separation, and vortex position and strength, are adequately simulated in the numerical solutions. Improved resolution of the computational grid in the leading edge region from a previous solution had considerable effect on the accuracy of the solutions. Good agreement between numerical solutions and experimental data was obtained for two cases. A local timestepping procedure is used to speed convergence by approximately a factor of two.

Buter, T. A.↗

Evaluating Ensemble Predictions of South Asian Monsoon Low Pressure System Genesis

Abstract Synoptic-scale vortices known as monsoon low pressure systems (LPSs) frequently produce intense precipitation and hydrological disasters in South Asia, so accurately forecasting LPS genesis is crucial for improving disaster preparedness and response. However, the accuracy of LPS genesis forecasts by numerical weather prediction models has remained unknown. Here, we evaluate the performance of two global ensemble models—the U.S. Global Ensemble Forecast System (GEFS) and the Ensemble Prediction System of the European Centre for Medium-Range Weather Forecasts (ECMWF)—in predicting LPS genesis during the years 2021–22. The GEFS successfully predicted about half the observed LPS genesis events 1–2 days in advance; the ECMWF model captured an additional 10% of observed genesis events. Both models had a false alarm ratio (FAR) of around 50% for 1–2-day lead times. In both ensembles, the control run typically exhibited a higher probability of detection (POD) of observed events and a lower FAR compared to the perturbed ensemble members. However, a consensus forecast, in which genesis is predicted when at least 20% of ensemble members forecast LPS formation, had POD values surpassing those of the control run for all lead times. Moreover, probabilistic predictions of genesis over the Bay of Bengal, where most LPSs form, were skillful, with the fraction of ensemble members predicting LPS formation over a 5-day lead time approximating the observed frequency of genesis, without any adjustment or bias correction.

Suhas, D. L.↗

The S-PLUS Fifth Data Release: Over 4500 Square Degrees of the Southern Sky and a Multicolor View of the Hydra and Antlia Galaxy Clusters

Abstract We present the fifth data release (DR5) of the Southern Photometric Local Universe Survey (S-PLUS), covering 4592 deg 2 across 2491 fields. Observations were conducted with the T80-South, a Brazilian robotic telescope equipped with the Javalambre 12-filter system, containing five broadband and seven narrowband filters. Data products feature FITS images and extensive catalogs containing fluxes, magnitudes, and shape parameters for over 113 million detections. In addition, several value-added catalogs are provided, offering photometric redshifts (photo- zs ), object classifications, masks, and extinction coefficients. For the first time, this release includes coverage of 110 deg 2 along the Galactic disk, facilitating new research into Galactic structure and stellar populations. The release also provides full coverage of the Hydra Supercluster and numerous other nearby clusters with improved data reduction and calibration, enhancing photo- z accuracy, which is vital for large-scale structure studies. A preliminary analysis of the Hydra and Antlia galaxy clusters up to 5 × R 200 yields an updated catalog of 1706 cluster members based on both spectroscopic and high-quality photo- zs . Our photometric data shows that both clusters have a similar proportion of galaxies with an H α excess relative to their clustercentric distance, though Hydra has a higher fraction near its center. Additionally, the spatial distribution of all objects in our sample highlights a bridge connecting both clusters. We verify that S-PLUS DR5 provides a solid foundation for future scientific investigations, ranging from solar system studies to cosmology.

Vinicius Rodrigues de Lima, Erik [Universidade de ↗

The effect of compact implicit differencing in a baroclinic primitive equations model

In an effort to improve forecast accuracy, the horizontal accuracy of gridpoint forecast models at a number of numerical weather prediction (NWP) centers was increased from second order to fourth order. The current GLAS model uses second-order explicit finite-difference formulas in the vertical and fourth-order explicit finite-difference formulas in the horizontal. Experiments are described which indicate the increased forecast accuracy gained by use of compact fourth-order finite differences in a simple baroclinic model. Tables show an increase in forecast accuracy by a factor of 100-150 by use of fourth-order instead of second-order vertical discretization.

Augenbaum, J. M.↗

Preconditioning for the Navier-Stokes equations with finite-rate chemistry

The preconditioning procedure for generalized finite-rate chemistry and the proper preconditioning for the one-dimensional Navier-Stokes equations are presented. Eigenvalue stiffness is resolved and convergence-rate acceleration is demonstrated over the entire Mach-number range from the incompressible to the hypersonic. Specific benefits are realized at low and transonic flow speeds. The extended preconditioning matrix accounts for thermal and chemical non-equilibrium and its implementation is explained for both explicit and implicit time marching. The effect of higher-order spatial accuracy and various flux splittings is investigated. Numerical analysis reveals the possible theoretical improvements from using proconditioning at all Mach numbers. Numerical results confirm the expectations from the numerical analysis. Representative test cases include flows with previously troublesome embedded high-condition-number regions.

Godfrey, Andrew G.↗

Improved Numerical Evaluation Method for Elliptic Integrals

Two modifications to Bartky's method for numerical evaluation of complete elliptic integrals increase rate of convergence and eliminate loss of accuracy due to roundoff errors. Other integrals (nonelliptic) evaluated by manipulating integrand into form F(R)/R required for evaluation by this method. Improved method used to map upper half of complex plane conformally onto interior or exterior of round-nosed wedges of various angles.

Rossow, V. J.↗

A new procedure for calculating contact stresses in gear teeth

A numerical procedure for evaluating and monitoring contact stresses in meshing gear teeth is discussed. The procedure is intended to extend the range of applicability and to improve the accuracy of gear contact stress analysis. The procedure is based upon fundamental solution from the theory of elasticity. It is an iterative numerical procedure. The method is believed to have distinct advantages over the classical Hertz method, the finite-element method, and over existing approaches with the boundary element method. Unlike many classical contact stress analyses, friction effects and sliding are included. Slipping and sticking in the contact region are studied. Several examples are discussed. The results are in agreement with classical results. Applications are presented for spur gears.

Somprakit, Paisan↗

Misaligned Wind‐Waves Behind Atmospheric Cold Fronts

Abstract Atmospheric fronts embedded in extratropical cyclones are high‐impact weather phenomena, contributing significantly to mid‐latitude winter precipitation. The three vital characteristics of the atmospheric fronts, high wind speeds, abrupt change in wind direction, and rapid translation, force the induced surface waves to be misaligned with winds exclusively behind the cold fronts. The effects of the misaligned waves under atmospheric cold fronts on air‐sea fluxes remain undocumented. Using the multi‐year in situ near‐surface observations and direct covariance flux measurements from the Pioneer Array off the coast of New England, we find that the majority of the passing cold fronts generate misaligned waves behind the cold front. Once generated, the waves remain misaligned, on average, for about 8 hr. The parameterized effect of misaligned waves in a fully coupled model significantly increases the roughness length (185%), drag coefficient (19%), and air‐sea momentum flux (11%). The increased surface drag reduces the wind speeds in the surface layer. The upward turbulent heat flux is weakly decreased by the misaligned waves because of the decrease in temperature and humidity scaling parameters being greater than the increase in friction velocity. The misaligned wave effect is not accurately represented in a commonly used wave‐based bulk flux algorithm. Yet, considering this effect in the current formulation improves the overall accuracy of parameterized momentum flux estimates. The results imply that better representing a directional wind‐wave coupling in the bulk formula of the numerical models may help improve the air‐sea interaction simulations under the passing atmospheric fronts in the mid‐latitudes.

Oceanography↗

Finite domain solution of a hydraulic fracture in a permeable rock

In this work, we present a domain-based algorithm to simulate the propagation of a plane-strain hydraulic fracture in a zero-toughness permeable elastic medium. The algorithm utilizes a domain-based method to solve the elasticity equation and integrates a multi-scale tip asymptote, which is particular to hydraulic fractures, into this framework. This integration is key to accurately model the energy dissipation and the fluid leak-off in the fracture tip region. The algorithm combines a 2D finite volume method (FVM) for solving the elasticity equation with a 1D FVM for solving the nonlinear lubrication equation. Incorporating the far-field asymptotics and using a moving-mesh scheme reduces the computational burden while improving the accuracy of the scheme. The paper concludes with an analysis of the numerical results. This study demonstrates the potential of this domain-based approach for modeling hydraulic fractures in poroelastic media.

Domain-based method↗

On the logarithmic-singularity correction in the kernel function method of subsonic lifting-surface theory

A logarithmic-singularity correction factor is derived for use in kernel function methods associated with Multhopp's subsonic lifting-surface theory. Because of the form of the factor, a relation was formulated between the numbers of chordwise and spanwise control points needed for good accuracy. This formulation is developed and discussed. Numerical results are given to show the improvement of the computation with the new correction factor.

Lan, C. E.↗

On Bartky's method for evaluation of integrals of elliptic type with application to round-nosed wedges

Bartky's method for the numerical evluation of integrals of the complete elliptic type is modified to improve its accuracy. The resulting modified method is then applied to integrals involving complex arithmetic which map the upper half of one plane onto either the interior or exterior of round-nosed wedges. These solutions have engineering applications to such problems as the design of magnets and the flow of fluids in and around corners.

Rossow, V. J.↗

TPSAS-NF1676L-10658-DND

The systematic methodology for constructing fourth-order finite domain Energy Stable WENO schemes is developed. We prove that for hyperbolic systems, the finite domain ESWENO scheme is stable in the energy norm for both continuous and discontinuous solutions. The eigenvalues of the finite domain ESWENO dissipation operator are located in the left-half plane. Based on the rigorous truncation error analysis, the new weight functions are developed, which drastically improve the accuracy of the ESWENO scheme and provide excellent shock-capturing capabilities. Numerical experiments show that the new finite domain ESWENO scheme with the new weights outperform the conventional WENO schemes in terms of accuracy.

Travis Fisher↗

Numerical Fluxes and Shocks

Accurately describing shocks within numerical partial differential equation solvers has been a significant computational hurdle for the field of applied mathematics. In our work we present and discuss the background and history of how shocks have been dealt with. We have analyzed numerical schemes and fluxes for the purpose of education and improved computational speed and accuracy. We demonstrate the need for specific methods to deal with shocks by showcasing some methods in a simple one dimensional case for burger’s equation. We aim to extend our knowledge to the euler equations.

Partial Differential Equations↗

Time-domain transient elastodynamic analysis of 3-D solids by BEM

The BEM algorithm developed by Banerjee and Ahmad (1985) and Banerjee et al. (1986) for the analysis of three-dimensional time-dependent elastodynamics problems is extended and refined to improve the accuracy of the internal stress predictions. A quadratic spatial shape function and a linear temporal shape function are employed, and the complete numerical implementation (as part of BEST3D) is outlined. Applications of the improved BEM to typical problems are presented graphically and briefly characterized. Included are spherical cavities subjected to sudden radial expansion, triangular or rectangular pulses of radial pressure, or ramp loading; a circular loaded area on a half space; and a flexible square plate foundation on an elastic half space.

Ahmad, S.↗

High-Order Energy Stable WENO Schemes

A new third-order Energy Stable Weighted Essentially NonOscillatory (ESWENO) finite difference scheme for scalar and vector linear hyperbolic equations with piecewise continuous initial conditions is developed. The new scheme is proven to be stable in the energy norm for both continuous and discontinuous solutions. In contrast to the existing high-resolution shock-capturing schemes, no assumption that the reconstruction should be total variation bounded (TVB) is explicitly required to prove stability of the new scheme. A rigorous truncation error analysis is presented showing that the accuracy of the 3rd-order ESWENO scheme is drastically improved if the tuning parameters of the weight functions satisfy certain criteria. Numerical results show that the new ESWENO scheme is stable and significantly outperforms the conventional third-order WENO finite difference scheme of Jiang and Shu in terms of accuracy, while providing essentially nonoscillatory solutions near strong discontinuities.

Yamaleev, Nail K.↗