Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Nuclear fission”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Demonstration of an All-Refractory Corrosion-Resistant Molten Salt Pumping and Storage Infrastructure Up to 950 degrees C

Concentrating solar power (CSP) with thermal energy storage (TES) has an estimated cost similar to solar photovoltaics (PV) with lithium-ion batteries (LIB), but CSP + TES has the potential for significantly reduced cost by operating above 700 degrees C. However, this requires a TES medium and containment infrastructure which are chemically compatible and do not degrade above 700 degrees C. MgCl2-KCl-NaCl (MKN) salt is a promising medium, but when MKN salt has small amounts of water and oxygen dissolved in it, it excessively corrodes conventional commercial alloys. Here, we consider refractory materials including graphite, carbon-carbon composite (C/C), and molybdenum because they maintain high mechanical strength at elevated temperatures and are expected to resist corrosion by MKN salt. While selection of refractory materials is often constrained by the need to remain chemically stable in air, this work uses an enclosure filled with inert gas to allow the use of materials like graphite and molybdenum. Notably, graphite components can seal against liquids unlike many brittle refractory materials. We demonstrate a centrifugal pump and mechanical seals made of refractory materials in a laboratory-scale circulation loop, which successfully operated continuously for more than 49 h at temperatures ranging from 750 degrees C to 950 degrees C with no mechanical failures or chemical degradation of the refractory materials. To the best of our knowledge, this is the highest temperature molten salt circulation loop that has been successfully developed, and this refractory infrastructure allows for operation at even much higher temperatures (<1600 degrees C) if a storage medium with a lower vapor pressure is used. The principles of this architecture are relevant to other applications with high temperature flowing metals and salts including Generation IV nuclear fission reactors for power production and molten salt electrolysis reactors for metallurgical processing.

14 SOLAR ENERGY↗
DOE OSTI2025

Myths of nuclear graphite in World War II, with original translations

We re-examine a common narrative that experimental errors by Walther Bothe in 1941 led Germany to abandon graphite as a reactor moderator during World War II. Using document-based nuclear archaeology, we first show that both American and German scientists used an incorrect carbon scattering cross section, thereby undermining the accuracy of all wartime data, including their conclusions on carbon’s absorption. Moreover, we argue that the availability of exceptionally pure petroleum coke in the United States, rather than any academic breakthrough, decisively enabled their production of nuclear-grade graphite. In contrast, Bothe’s Siemens electrographite had more boron contamination than any graphites considered in Fermi’s experiments, rendering it genuinely impractical as a moderator. By reframing the decision to eschew graphite as a deliberate decision rather than a mere experimental oversight, we believe the German decision was a rational consequence of material constraints and wartime priorities.

42 ENGINEERING↗
DOE OSTI2024

Fusion Neutron Generator

The proposed code, named FROG (Fusion neutron Generator) is built upon the open-source particle transport Monte Carlo toolkit Geant4. Geant4 provides C++ classes that can be leveraged to build application-specific codes dealing with the transport of particles through matter. Geant4-based codes are applied in high-energy particle physics experiments, medical applications, shielding, and space applications for example. The FROG code allows the user to define the geometry of a neutron converter device shaped as a hollow cylinder, where a neutron breeding material such as lithium deuteride (LiD) is cladded by two concentric cylinders. Such neutron converter is then placed inside a regular nuclear fission reactor, where thermal neutrons will react with the neutron breeder material (typically, Lithium 6), and through a series of reactions, will generate high-energy neutrons – neutrons whose kinetic energy are around 14 MeV. The hollowed central portion can hold a specimen that will be bombarded by high-energy neutrons created inside the neutron breeding material. Figuratively speaking, this type of device transforms neutrons from thermal (~0.625 eV) to fusion (~14 MeV) energies and is sometimes termed “fusion-to-thermal neutron converters” in the literature. The code consists of C++ source file compiled and linked to generate an executable. The user can select the dimensions of the converter (radius, length, and thickness of the breeder material), the breeder material type, the cladding material, and the specimen material that will be activated or irradiated. As input, the neutron flux for a specific location inside a reactor, for instance, positions in ATR, is required. As output, the code predicts the number of high-energy neutrons produced, the total neutron flux and fluence as well as its detailed spectrum. The physics involved in such device is very complex, as it requires modeling neutron transport, light-ion (tritons) transport, as well as fusion reactions. The Geant4 toolkit provides the required physical models.

Martin, NicholasP. [Idaho National Laboratory (INL↗
DOE OSTI2025

Prediction of Solute Segregation at Metal/Oxide Interfaces Using Machine Learning Approaches

The atomic structure and chemistry at metal/oxide interfaces play a crucial role in determining their properties. However, studying semi-coherent metal/oxide interfaces that include misfit dislocations through density functional theory (DFT) is often computationally expensive due to the large number of atoms involved, ranging from hundreds to thousands. In this study, we explore solute segregation behavior at the Fe/Y 2 O 3 interface—an important model interface for cladding applications in nuclear fission reactors—by combining DFT calculations with a machine learning (ML) approach. ML models are trained using DFT-calculated segregation energies (𝐸 𝑆𝑒𝑔 ) to identify the key chemical and geometric factors influencing solute segregation at metal/oxide interfaces, revealing the competition between these features in determining 𝐸 𝑆𝑒𝑔 . Moreover, the segregation behavior at a specific Fe/Y 2 O 3 interface is predicted with high accuracy using ML models trained on data from this interface. Furthermore, it is found that the ML models could also predict solute segregation at a different Fe/Y 2 O 3 interface with a new orientation relationship (OR), at a computational cost of less than 1/45 of that required for similar DFT calculations.

36 - MATERIALS SCIENCE↗
DOE OSTI2024

Nuclear Uncertainties Associated with the Nucleosynthesis in Ejecta of a Black Hole Accretion Disk

Abstract The simulation of heavy element nucleosynthesis requires input from yet-to-be-measured nuclear properties. The uncertainty in the values of these off-stability nuclear properties propagates to uncertainties in the predictions of elemental and isotopic abundances. However, for any given astrophysical explosion, there are many different trajectories, i.e., temperature and density histories, experienced by outflowing material, and thus different nuclear properties can come into play. We consider combined nucleosynthesis results from 460,000 trajectories from a black hole accretion disk and find the spread in elemental predictions due solely to unknown nuclear properties to be a factor of a few. We analyze this relative spread in model predictions due to nuclear variations and conclude that the uncertainties can be attributed to a combination of properties in a given region of the abundance pattern. We calculate a cross-correlation between mass changes and abundance changes to show how variations among the properties of participating nuclei may be explored. Our results provide further impetus for measurements of multiple quantities on individual short-lived neutron-rich isotopes at modern experimental facilities.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Comparison of Ion and Neutron Irradiations to 3 dpa at 500C in Ferritic-Martensitic Alloys

The growing global demand for energy will increasingly call upon advanced nuclear fission reactors to supply safe and reliable electricity. The structural and fuel cladding components of these reactors will be subject to extreme conditions of irradiation damage up to several hundred displacements per atom (dpa) at temperatures as high as 700°C. Ferritic-martensitic (F-M) steels are leading candidates for these challenging conditions due to their strength and dimensional stability under irradiation. In order to accelerate the process for evaluating F-M alloys, charged particles are increasingly being used to emulate neutron irradiations. Charged particle irradiations allow the possibility of conducting irradiation experiments within a shorter time period (i.e. at a rate up to 4 orders of magnitude faster) and with minimal radioactivation of the material, enabling lower cost and faster turnaround of post irradiation examination and analysis. However, the irradiation dose rate, damage cascade morphologies, and irradiation damage depth profiles all differ widely between protons, heavier ions, and neutrons. Currently, there is limited understanding of the significance of these physical differences and how they manifest in the irradiated microstructure and mechanical properties of F-M steels. The objective of this study is to evaluate charged particles as a surrogate for neutron irradiations in F-M alloys by assessing common irradiation conditions using Fe++ ions, protons, and neutrons. Keeping the temperature and dose consistent enables isolation of the effects of each irradiating particle and their respective dose rates and cascade morphologies.

Swenson, M.J.↗
NASA NTRS1972

Comparison of advanced propulsion concepts for deep space exploration

Equations and charts are presented that permit rapid estimation of propulsion-system performance requirements for some typical deep-space missions. A number of advanced propulsion concepts for which performance estimates are available are compared with respect to their capability for flyby, rendezvous, and roundtrip planetary missions. Based on these estimates, the gas-core nuclear fission rocket and the pulsed fusion rocket yield the fastest trip times to the near planets. For round trips to Jupiter and beyond, the controlled fusion rocket shows progressively superior capabilities. Several propulsion concepts based on use of impinging laser beams are found to be noncompetitive with the other advanced concepts for deep space missions. Requirements for attainment of interstellar distances within a human lifetime are found to be some orders of magnitude beyond the capabilities of any propulsion concepts for which performance estimates are now possible.

Moeckel, W. E.↗
NASA NTRS1972

Comparison of advanced propulsion concepts for deep space exploration.

Equations and charts are presented which permit rapid estimation of propulsion system performance requirements for some typical deep space missions. The simplicity results from use of gravity-free equations of motion, which are shown to yield good approximations to trip times obtained with solar gravity and planetary motion included. The agreement is satisfactory for missions that do not enter or depart from low orbits about the major planets. A number of advanced propulsion concepts for which performance estimates are available are compared with respect to their capability for fly-by, rendezvous, and round-trip planetary missions. Based on these estimates, the gas-core nuclear fission rocket and the pulsed fusion rocket yield the fastest trip times to the near planets. For round trips to Jupiter and beyond, the controlled fusion rocket shows progressively superior capabilities. Several propulsion concepts based on use of impinging laser beams are found to be noncompetitive with the other advanced concepts for deep space missions.

Moeckel, W. E.↗
NASA NTRS1975

Comparison and evaluation of nuclear power plant options for geosynchronous power stations

The suitability of eleven types of nuclear fission reactors in combination with five potential energy conversion systems for use in geosynchronous power plants is evaluated. Gas turbine, potassium Rankine liquid metal MHD, and thermionic energy conversion systems are considered. The existing technology of reactors in near-term, intermediate-term, and long-term classes is discussed, together with modifications for use in large-scale power production in space. Unless the temperature is high enough for MHD, reactors which heat gases are generally more suitable for use with gas turbines. Those which heat liquid metals will be more useful for potassium Rankine or liquid metal MHD conversion systems.

Williams, J. R.↗
NASA NTRS1976

Hydrogen as an energy medium

Coal, though abundant in certain geographical locations of the USA poses environmental problems associated with its mining and combustion. Also, nuclear fission energy appears to have problems regarding safety and radioactive waste disposal that are as yet unresolved. The paper discusses hydrogen use and market projection along with energy sources for hydrogen production. Particular attention is given to hydrogen production technology as related to electrolysis and thermochemical water decomposition. Economics of hydrogen will ultimately be determined by the price and availability of future energy carriers such as electricity and synthetic natural gas. Thermochemical methods of hydrogen production appear to offer promise largely in the efficiency of energy conversion and in capital costs over electrolytic methods.

Cox, K. E.↗
NASA NTRS1979

Do photovoltaics have a future

There is major concern as to the economic practicality of widespread terrestrial use because of the high cost of the photovoltaic arrays themselves. Based on their high efficiency, photovoltaic collectors should be one of the cheapest forms of energy generators known. Present photovoltaic panels are violating the trend of lower costs with increasing efficiency due to their reliance on expensive materials. A medium technology solution should provide electricity competitive with the existing medium to high technology energy generators such as oil, coal, gas, and nuclear fission thermal plants. Programs to reduce the cost of silicon and develop reliable thin film materials have a realistic chance of producing cost effective photovoltaic panels.

Williams, B. F.↗
NASA NTRS1981

An evaluation of nuclear electric propulsion for planetary exploration missions

A set of nuclear electric propulsion (NEP) system parameters for planetary exploration missions is described. Orbiter missions to the planets Saturn, Uranus and Neptune were selected for assessment, and five delivery modes were evaluated. The NEP system envisioned for this application consisted of a nuclear fission reactor with a thermoelectric conversion system and a thrust subsystem comprised of power processors coupled with mercury ion-bombardment thrusters. The results indicate that an NEP system sized at 90-160 kW electrical power rating and operating within a specific impulse range of 4500-5500 sec provides adequate performance for outer planet exploration.

Nagorski, R. P.↗
NASA NTRS1984

Lunar nuclear power feasibility study

Based on review of literature and on limited examination of nuclear power systems now proposed for space applications, a nuclear fission reactor powered system should be seriously considered as the first large (order of 50 kWe or greater) power system to be placed on a lunar base. With relatively minor modifications, the major one being addition of a cooled side shield, the proposed 100 kWe product of the SP-100 Program could be adapted for use on a lunar base.

Erdman, C. A.↗
NASA NTRS1985

Electric propulsion - A far reaching technology

It is shown that a starprobe could be built to perform a flyby mission to Proxima Centauri in approximately 400 years. This vehicle would use familiar fission nuclear reactor and ion propulsion system technologies to achieve a burn-out velocity of 0.0122c. Fine engineering and progressive technology refinements are shown to be the key to operating, and further improving, the capability of this long burn time propulsion system.

Aston, G.↗
NASA NTRS1987

Advanced propulsion activities in the USA

An evaluation is made of technology development prospects for launch vehicle, orbit transfer vehicle, satellite, and planetary exploration spacecraft propulsion systems being contemplated by NASA and its research contractors. Attention is given to such electric propulsion systems as arcjet, pulsed plasma, ion, and resistojet thrusters, as well as to solar thermal heat exchanger powerplants, beamed energy propulsion systems, and ultra-advanced nuclear fission and fusion propulsion concepts.

Garrison, P. W.↗
NASA NTRS1988

Energy requirements for HE-3 mining operations on the Moon

At the present rate of world energy consumption (10 TW-y/y) and allowing for an equilibrium consumption of 20 to 30 TW-y/y in mid 21st century, we will exhaust economically recoverable fossil fuels in the next 50 to 60 years. We will then have to rely on nuclear (fission and fusion) and renewable energy to feed, warm, and protect the world's population. Fusion energy is expected to play an important role in the 21st century and there a 2 billion dollar per year research program to commercialize that energy resource. A serious problem with this is its reliance on the D-T fuel cycle which releases 80 percent of its energy in the form of neutrons. These neutrons cause significant radiation damage and induce large amounts of radioactivity. There is another fusion fuel cycle involving the isotopes of Deuterium and Helium-3 which, if configured properly, releases 1 percent or less of its energy in neutrons. Obviously, such a fuel would be preferred, but there is no large source of He-3 known to satisfy world energy needs. Fortunately, a very large source of He-3 was found on the Moon, implanted over the past 4 billion years by the solar wind. Recent analysis of Apollo and Luna data reveals that over a million tons of He-3 sit on the Moon's surface. The potential energy in this He-3 fuel is 10 times that contained in all the coal, oil, and natural gas on the Earth. The purpose of this paper is to examine the energy required to extract the He-3 from the lunar regolith.

Kulcinski, Gerald L.↗
NASA NTRS1989

M.I.N.G., Mars Investment for a New Generation: Robotic construction of a permanently manned Mars base

A basic procedure for robotically constructing a manned Mars base is outlined. The research procedure was divided into three areas: environment, robotics, and habitat. The base as designed will consist of these components: two power plants, communication facilities, a habitat complex, and a hangar, a garage, recreation and manufacturing facilities. The power plants will be self-contained nuclear fission reactors placed approx. 1 km from the base for safety considerations. The base communication system will use a combination of orbiting satellites and surface relay stations. This system is necessary for robotic contact with Phobos and any future communication requirements. The habitat complex will consist of six self-contained modules: core, biosphere, science, living quarters, galley/storage, and a sick bay which will be brought from Phobos. The complex will be set into an excavated hole and covered with approximately 0.5 m of sandbags to provide radiation protection for the astronauts. The recreation, hangar, garage, and manufacturing facilities will each be transformed from the four one-way landers. The complete complex will be built by autonomous, artificially intelligent robots. Robots incorporated into the design are as follows: Large Modular Construction Robots with detachable arms capable of large scale construction activities; Small Maneuverable Robotic Servicers capable of performing delicate tasks normally requiring a suited astronaut; and a trailer vehicle with modular type attachments to complete specific tasks; and finally, Mobile Autonomous Rechargeable Transporters capable of transferring air and water from the manufacturing facility to the habitat complex.

Amos, Jeff↗