Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “NiO”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Nucleation Effects in the Atomic Layer Deposition of Nickel–Aluminum Oxide Thin Films

Atomic layer deposition (ALD) has become an important technique to synthesize a wide variety of materials on the subnanometer length scale. Expanding the library of ALD for ternary materials is vital for applications in which ternary materials allow for tuning of physical, optical, and electronic properties. In this work reported herein, we demonstrate the first report of nickel–aluminum oxide (Ni–Al–O) films deposited by ALD using nickeloceneozone and trimethylaluminum-water as reactants. While deposition of a wide range of compositions is achieved, the observed growth per cycle (GPC) did not follow the simple combination of GPCs measured for the binary ALD processes. Nucleation studies performed to better understand this behavior reveal that the deposition of aluminum oxide is greatly enhanced on a NiO surface prepared by nickelocene and ozone. A model is developed that considers nucleation effects to predict composition and thickness as a function of supercycle recipe. Characterization of the deposited films shows that Al-doping of NiO results in contraction of the NiO lattice, decreased crystallinity, and reduced density, and that films become completely amorphous at compositions with less than 50% Ni. In addition, Al-doped NiO films deposited by ALD are investigated as a hole-selective transport layer in lead-based perovskite solar cells. An Al doping of ~4% improves power conversion efficiency of the perovskite-based devices over that of NiO primarily through increases in fill factor.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Elucidating the role of earth alkaline doping in perovskite-based methane dry reforming catalysts

To elucidate the role of earth alkaline doping in perovskite-based dry reforming of methane (DRM) catalysts, we embarked on a comparative and exemplary study of a Ni-based Sm perovskite with and without Sr doping. While the Sr-doped material appears as a structure-pure Sm 1.5 Sr 0.5 NiO 4 Ruddlesden Popper structure, the undoped material is a NiO/monoclinic Sm 2 O 3 composite. Hydrogen pre-reduction or direct activation in the DRM mixture in all cases yields either active Ni/Sm 2 O 3 or Ni/Sm 2 O 3 /SrCO 3 materials, with albeit different short-term stability and deactivation behavior. The much smaller Ni particle size after hydrogen reduction of Sm 1.5 Sr 0.5 NiO 4 , and of generally all undoped materials stabilizes the short and long-term DRM activity. Carbon dioxide reactivity manifests itself in the direct formation of SrCO 3 in the case of Sm 1.5 Sr 0.5 NiO 4 , which is dominant at high temperatures. For Sm 1.5 Sr 0.5 NiO 4 , the CO : H 2 ratio exceeds 1 at these temperatures, which is attributed to faster direct carbon dioxide conversion to SrCO 3 without catalytic DRM reactivity. As no Sm 2 O 2 CO 3 surface or bulk phase as a result of carbon dioxide activation was observed for any material – in contrast to La 2 O 2 CO 3 – we suggest that oxy-carbonate formation plays only a minor role for DRM reactivity. Rather, we identify surface graphitic carbon as the potentially reactive intermediate. Graphitic carbon has already been shown as a crucial reaction intermediate in metal-oxide DRM catalysts and appears both for Sm 1.5 Sr 0.5 NiO 4 and NiO/monoclinic Sm 2 O 3 after reaction as crystalline structure. It is significantly more pronounced for the latter due to the higher amount of oxygen-deficient monoclinic Sm 2 O 3 facilitating carbon dioxide activation. Despite the often reported beneficial role of earth alkaline dopants in DRM catalysis, we show that the situation is more complex. In our studies, the detrimental role of earth alkaline doping manifests itself in the exclusive formation of the sole stable carbonated species and a general destabilization of the Ni/monoclinic Sm 2 O 3 interface by favoring Ni particle sintering.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Voltage and temperature effects on low cobalt lithium-ion battery cathode degradation

Degradation of low cobalt lithium-ion cathodes was tested using a full factorial combination of upper cut-off voltage (4.0 V and 4.3 V vs. Li/Li + ) and operating temperature (25 °C and 60 °C). Half-cell batteries were analyzed with electrochemical and microstructural characterization methods. Electrochemical performance was assessed with galvanostatic cycling, cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS) supported by distribution of relaxation times (DRT) analysis. Electrode microstructure was characterized with scanning electron microscopy (SEM), X-ray diffraction (XRD), and X-ray absorption near edge structure (XANES) imaging. Higher cut-off voltage cycling shows presence of NiO x formation, a low diffusivity rock-salt phase, in both CV and XRD data. XRD patterns confirmed that the rock-salt phase was beginning to form at the low cut-off voltage at high temperature, but in much lower intensity than at the high cut-off voltage. Higher temperature accelerates degradation processes at both voltages. Degradation factors at high temperature include NiO x formation, cathode material dissolution, and electrolyte decomposition. SEM analysis suggests that supporting phases may isolate and disconnect active material particles reducing capacity retention and battery life cycle. DRT analysis and XANES imaging show that both high temperature samples revealed a NiO x phase based on an increased diffusive impedance and a visible shift in the XANES spectra. The low cut-off voltage, high temperature sample showed a split peak and shift to lower energies indicating early formation of the NiO x phase. The diffusive impedance, which hinders intercalation and deintercalation, is driven by the formation of the NiO x phase. While primarily driven by cut-off voltage, elevated temperature also contributes to this degradation mechanism.

electrochemical impedance spectroscopy↗
DOE OSTI2025

Molten Salt Synthesis of Increased (100)-Facet and Polycrystalline Nickel Oxide Nanoparticles for the Oxygen Evolution Reaction: Impact of Facet and Crystallinity on Electrocatalysis

Nickel oxide nanocubes with increased (100) surface facet presence (NiO(100)) were synthesized through a molten salt synthesis procedure to probe their oxygen evolution reaction (OER) activity in order to investigate the relationship between the surface facet and OER performance. While altering the synthesis parameters to decrease NiO(100) particle sizes and agglomeration, a polycrystalline NiO nanoparticle system formed from using Li2O as a Lux-Flood base (labelled Li2O-MSS NiO, where MSS stands for molten salt synthesis). This novel synthesis was further elaborated and the obtained materials were also tested for OER activity. After thorough structural characterization to determine crystallinity, lattice spacings, and elemental distribution, their OER activity was compared versus high surface area NiO(111) nanosheets in a three-electrode rotating disk electrode (RDE) system. The activity trend of (111) > Li2O-MSS > (100) was observed. This decrease in activity of the nanocube and polycrystalline samples was explained by differences between theoretical and experimental conditions, differences in ink rheology and resulting catalyst layer properties, and significant agglomeration seen in the imaging of the sample. Methods for improving the OER activity of these samples are discussed in the conclusion of this study.

08 HYDROGEN↗
DOE OSTI2024

NiGa 2 O 4 interfacial layers in NiO/Ga 2 O 3 heterojunction diodes at high temperature

NiO/Ga 2 O 3 heterojunction diodes have attracted attention for high-power applications, but their high temperature performance and reliability remain underexplored. Here, we report the time evolution of the electrical properties in the widely studied p-NiO/n-Ga 2 O 3 heterojunction diodes and formation of NiGa 2 O 4 interfacial layers at high temperatures. Results of our thermal cycling experiment show an initial leakage current increase which stabilizes after sustained thermal load, due to reactions at the NiO–Ga 2 O 3 interface. High-resolution TEM microstructure analysis of the devices after thermal cycling indicates that the NiO–Ga 2 O 3 interface forms a ternary compound at high temperatures, and thermodynamic calculations suggest the formation of the spinel NiGa 2 O 4 layer between NiO and Ga 2 O 3 . First-principles defect calculations find that NiGa 2 O 4 shows low p-type intrinsic doping and hence can serve to limit electric field crowding at the interface. Vertical NiO/ Ga 2 O 3 diodes with intentionally grown 5 nm thin spinel-type NiGa 2 O 4 interfacial layers show an excellent device ON/OFF ratio of >10 10 (± 3 V), V ON of ~1.9 V, and increased breakdown voltage of ~1.2 kV for an initial unoptimized 300 lm diameter device. These p–n heterojunction diodes are promising for high-voltage, high temperature applications.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2025

Effect of high scandium doping in barium zirconate on nickel diffusion and performance of proton-conducting solid oxide electrolyzer cells

Proton-conducting solid oxide electrolyzer cells (p-SOECs) are emerging but promising technologies for hydrogen production. However, due to the lack of a robust electrolyte, p-SOECs struggle simultaneously to display high performance, Faradaic efficiency, and durability. Motivated by its high proton concentrations and stability as a barium zirconate, we have investigated BaZr 0.6 Sc 0.4 O 3-δ (BZSc40) as a potential next-generation p-SOEC electrolyte. Here, we found elevated levels of NiO diffusion through BZSc40 electrolytes during high-temperature sintering, attributed to the large oxygen vacancy concentrations present in BZSc40, as revealed by first-principle computational results. Controlling NiO diffusion is critical, as it can facilitate densification and grain size growth, but it may also detrimentally impact performance by causing electronic leakage. By optimizing sintering temperature when fabricating BZSc40 cells, we successfully controlled NiO diffusion, achieving sufficient electrolyte densification along with high performance and Faradaic efficiency. BZSc40 cells reached −0.99 A/cm 2 at 1.3 V and 600 °C and exhibited enhanced durability with a 3.37 mV/kh degradation rate at −0.8 A/cm 2 over a 200-h testing period. BZSc40 electrolytes demonstrated superior performance over BaZr 0.8 Y 0.2 O 3-δ (BZY20). In addition to elevated current densities and grain sizes, BZSc40 cells achieved Faradaic efficiencies of 76 % compared to 54 % for BZY20 at −0.2 A/cm 2 and 600 °C. This work lays the foundation for BZSc40 as a potential electrolyte due to its advantages over BZY20 while demonstrating the significance of controlling NiO diffusion when fabricating p-SOECs.

Electrolyzer↗
DOE OSTI2024

On the Topotactic Phase Transition Achieving Superconducting Infinite‐Layer Nickelates

Abstract Topotactic reduction is critical to a wealth of phase transitions of current interest, including synthesis of the superconducting nickelate Nd 0.8 Sr 0.2 NiO 2 , reduced from the initial Nd 0.8 Sr 0.2 NiO 3 /SrTiO 3 heterostructure. Due to the highly sensitive and often damaging nature of the topotactic reduction, however, only a handful of research groups have been able to reproduce the superconductivity results. A series of in situ synchrotron‐based investigations reveal that this is due to the necessary formation of an initial, ultrathin layer at the Nd 0.8 Sr 0.2 NiO 3 surface that helps to mediate the introduction of hydrogen into the film such that apical oxygens are first removed from the Nd 0.8 Sr 0.2 NiO 3 / SrTiO 3 (001) interface and delivered into the reducing environment. This allows the square‐planar / perovskite interface to stabilize and propagate from the bottom to the top of the film without the formation of interphase defects. Importantly, neither geometric rotations in the square planar structure nor significant incorporation of hydrogen within the films is detected, obviating its need for superconductivity. These findings unveil the structural basis underlying the transformation pathway and provide important guidance on achieving the superconducting phase in reduced nickelate systems.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Exploring the Spatial Control of Topotactic Phase Transitions Using Vertically Oriented Epitaxial Interfaces

Engineering oxygen vacancy formation and distribution is a powerful route for controlling the oxygen sublattice evolution that affects diverse functional behavior. The controlling of the oxygen vacancy formation process is particularly important for inducing topotactic phase transitions that occur by transformation of the oxygen sublattice. Here we demonstrate an epitaxial nanocomposite approach for exploring the spatial control of topotactic phase transition from a pristine perovskite phase to an oxygen vacancy-ordered brownmillerite (BM) phase in a model oxide La 0.7 Sr 0.3 MnO 3 (LSMO). Incorporating a minority phase NiO in LSMO films creates ultrahigh density of vertically aligned epitaxial interfaces that strongly influence the oxygen vacancy formation and distribution in LSMO. Combined structural characterizations reveal strong interactions between NiO and LSMO across the epitaxial interfaces leading to a topotactic phase transition in LSMO accompanied by significant morphology evolution in NiO. Using the NiO nominal ratio as a single control parameter, we obtain intermediate topotactic nanostructures with distinct distribution of the transformed LSMO-BM phase, which enables systematic tuning of magnetic and electrical transport properties. The use of self-assembled heterostructure interfaces by the epitaxial nanocomposite platform enables more versatile design of topotactic phase structures and correlated functionalities that are sensitive to oxygen vacancies.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Small Polarons and Surface Defects in Metal Oxide Photocatalysts Studied Using XUV Reflection–Absorption Spectroscopy

In photocatalytic transition metal oxides, the surface electronic structure and carrier kinetics are complicated by both charge trapping at defects and self-trapping by small polaron formation. These effects are specific to both the material and the type of defect or surface states involved. Here we review recent studies on ultrafast photoexcited charge carrier dynamics at the surfaces of alpha-Fe 2 O 3 (hematite) and NiO and at the interface of a alpha-Fe 2 O 3 /NiO heterojunction using extreme ultraviolet (XUV) reflection-absorption spectroscopy. We study dynamics of small polaron formation at hematite surfaces showing that the rate of carrier self-trapping is slower than in the bulk due to a greater lattice reorganization energy required for surface polaron formation. We also show that surface dynamics of hematite can be systematically tuned to control carrier transport properties through surface functionalization. To better understand the impact of defects on carrier events, we study charge carrier recombination of NiO. It is shown that O vacancies have no detrimental effect on carrier lifetime while grain boundaries cause fast recombination. Finally, we study a model heterojunction consisting of alpha-Fe 2 O 3 and NiO and find that interfacial charge transfer across these two materials occurs by a two-step mechanism where the interfacial electric field drives fast exciton dissociation followed by hole injection from alpha-Fe2O3 to NiO. Finally, these examples illustrate future opportunities to observe surface electron dynamics in photocatalytic materials with element and chemical state resolution using ultrafast XUV spectroscopy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Modulating the Lattice Stability in Sodium-Layered Oxide Cathodes through Inductive Effect

Stability and safety of sodium layered oxide cathodes relative to lithium analogs remain a critical concern, yet its fundamental origin remains poorly understood. Here, we examine the role of sodium – oxygen bond ionicity in governing outgassing by introducing 5% lithium (Li), potassium (K), or both into layered NaNiO 2 (NNO), yielding Na 0.95 Li 0.05 NiO 2 , Na 0.95 K 0.05 NiO 2 , and Na 0.90 Li 0.05 K 0.05 NiO 2 . Online electrochemical mass spectrometry at 4.3 V reveals that K substitution increases gas evolution with similar charge capacity, whereas Li substitution reduces gas evolution by nearly 80% with only a 16% capacity decrease. Capacity-controlled experiments show that NNO must be charged to only 3.8 V (144 mA h g -1 ) to achieve gas evolution comparable to Na 0.95 Li 0.05 NiO 2 charged to 4.3 V (175 mA h g -1 ). These results demonstrate that tuning alkali-metal–oxygen bond ionicity through the inductive effect regulates Ni–O covalency, lattice oxygen stability, and interfacial reactivity, providing design guidance for safer sodium layered oxide cathodes.

25 ENERGY STORAGE↗
DOE OSTI2020

Reforming of methane with carbon dioxide over cerium oxide promoted nickel nanoparticles deposited on 4-channel hollow fibers by atomic layer deposition

Ni nanoparticles were deposited on four-channel structured α-Al2O3 hollow fibers by atomic layer deposition (ALD). CeO 2 was loaded by a liquid phase incipient wetness method to promote Ni catalysts for dry reforming of methane. For Ni/Al 2 O 3 prepared by ALD, inactive NiAl2O4 that originated from the Ni ALD process was incompletely reduced. The introduced CeO 2 was found to weaken the NiO–Al 2 O 3 interaction, free NiO from NiO–Al 2 O 3 or NiAl 2 O 4 , and improve the reducibility of NiO. The higher reducibility of NiAl 2 O 4 , tuned by CeO 2 , further activated the catalyst during DRM, because a larger proportion of NiAl 2 O 4 was gradually reduced to metallic nickel by the reaction products. The optimal catalytic performance reached a methane reforming rate of 2410 L h -1 gNi -1 at 850 °C. The CeO 2 promoted catalyst also exhibited an excellent performance after regeneration. In addition, the inhibition effect of CeO 2 on coke formation was observed, due to the enhanced CO 2 dissociative adsorption by CeO 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Single-atom molybdenum doping induces nickel oxide-to-hydroxide transformation for enhanced alkaline hydrogen evolution

NiMoO x compounds are widely regarded as among the most efficient non-noble metal catalysts for the hydrogen evolution reaction (HER). Nevertheless, understanding the structural evolution under in situ conditions and further enhancing their performance remain key challenges. Herein, we report that single-atom Mo doping in NiO significantly enhances its HER activity, reducing the overpotential to 131 mV at 10 mA cm −2 compared to undoped NiO. In situ X-ray absorption spectroscopy and Raman spectroscopy reveal that under catalytic conditions, Mo single atoms remain structurally stable, while Ni 2+ species in NiO are converted to Ni(OH) 2 in alkaline media under the applied working potential for HER. Notably, this transformation is absent in undoped NiO, indicating that Mo doping promotes the formation of active Ni(OH) 2 sites, which, in turn, accelerate the rate-limiting water dissociation step. These findings provide critical mechanistic insights into the structural evolution of NiMoO x during alkaline HER and highlight the importance of in situ studies in the development of highly efficient catalysts.

58 GEOSCIENCES↗
DOE OSTI2020

Aspects of the synthesis of thin film superconducting infinite-layer nickelates

The recent observation of superconductivity in Nd 0.8 Sr 0.2 NiO 2 calls for further investigation and optimization of the synthesis of this infinite-layer nickelate structure. Here, we present our current understanding of important aspects of the growth of the parent perovskite compound via pulsed laser deposition on SrTiO 3 (001) substrates and the subsequent topotactic reduction. We find that to achieve single-crystalline, single-phase superconducting Nd 0.8 Sr 0.2 NiO 2 , it is essential that the precursor perovskite Nd 0.8 Sr 0.2 NiO 3 thin film is stabilized with no visible impurity phases; in particular, a Ruddlesden–Popper-type secondary phase is often observed. We have further investigated the evolution of the soft-chemistry topotactic reduction conditions to realize full transformation to the infinite-layer structure with no film decomposition or formation of other phases. We find that capping the nickelate film with a subsequent SrTiO 3 layer provides an epitaxial template to the top region of the nickelate film, much like the substrate. Thus, for currently optimized growth conditions, we can stabilize superconducting single-phase Nd 0.8 Sr 0.2 NiO 2 (001) epitaxial thin films up to ~10 nm.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Evidence for nodal superconductivity in infinite-layer nickelates

Infinite-layer nickelates present a new family of potential unconventional superconductors. A key open question is the superconducting pairing symmetry. We present low-temperature measurements of the magnetic penetration depth in optimally doped La 0.8 Sr 0.2 NiO 2 , Pr 0.8 Sr 0.2 NiO 2 , Nd 0.8 Sr 0.2 NiO 2 , and Nd 0.7875 Sr 0.2125 NiO 2 . For La- and Pr-nickelates, the superfluid density shows a quadratic temperature dependence, indicating nodal superconductivity in the presence of disorder. Nd-nickelate exhibits complex low-temperature behavior associated with Nd 4f magnetism, which precludes a direct measure of the nodal structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Hybrid Nanostructured Ni(OH) 2 /NiO for High Capacity Lithium–ion Battery Anodes

A straightforward hydrothermal process followed by a controlled calcination technique is introduced for the synthesis of a Ni(OH) 2 modified NiO nanohybrid structure. Conversion materials as Li-ion battery anodes, NiO in this case, suffer from capacity fade and structural/morphological instability during lithiation and delithiation. The novelty of this work is in utilizing this hybrid configuration to increase the specific capacity and enable reversible electrochemistry. Here, we study the lithiation/delithiation process of NiO using a suite of spectroscopy and microscopy techniques from the atomic to electrode scale. We propose a mechanism for a reversible redox couple behavior of the NiO electrode by means of a hybrid Ni(OH)2/NiO structure. The ultimate objective of this work is to guide the development of anode with rationally-designed heterogeneity to create high capacity Li-ion batteries with excellent cycling and rate performance.

25 ENERGY STORAGE↗
DOE OSTI2021

Developing Accelerated Test Protocols and Tuning Microstructures of the Common Materials to Improve Robustness, Reliability, and Endurance of SOFC Cells

This work is built on our prior work where we found that phase transformation in praseodymium nickelates, e.g. Pr 2 NiO 4 (PNO) and (Pr 1-x Nd x ) 2 NiO 4 (PNNO), can be electrochemically driven, and is substantially faster when compared to thermal annealing studies. The first task aims at an attempt to further accelerate the phase transformation in the oxygen electrode by alternating the current input in the cells, which lead to the development of accelerated test protocols (ATPs). ATPs showed up to 60x faster phase transformation and up to 10x faster performance degradation in (Pr 0.50 Nd 0.50 ) 2 NiO 4 electrodes, when compared to long-term operation under constant current density. Furthermore, the phase stable Nd 2 NiO 4 and (La 0.6 Sr 0.4 )(Co 0.8 Fe 0.2 )O 3 (LSCF6482) electrodes were tested in full cells under ATPs, and showed up to 10x faster performance degradation within 1,100 hours in a comparison with long-term thermal annealing studies and electrochemical operation under constant current density. The second task aims at the quantification of the contributions of cell components to the total impedance of a solid oxide fuel cell (SOFC) using electrochemical impedance spectroscopy (EIS) and distribution of relaxation times (DRT). Specifically, the role of gas composition at both anode and cathode was systematically studied, aiming at deconvoluting, identifying and quantifying the contributions of different electrode processes. This was achieved by first tuning the partial pressure of H 2 at the anode and subsequently varying the partial pressure of O 2 at the cathode. The results suggest that, while DRT offers a viable way of deconvoluting different times distributions, additional attention is needed before assigning a peak to a specific electrode process due to the significant overlap of the contributions from the cathode and the anode. Density function theory studies show that both Pr-vacancies and O-defects play a key role on the activity and stability for nickelates towards oxygen reduction reaction. The resident O-interstitials and oxygen ions in the PrO layer form peroxide (O 2 2- ) nearby Pr vacancies. The O 2 2- limits oxygen-ion transport due to the required additional energy to break its O-O bond. We further calculated the formation and segregation energies for different Ln ions (La, Pr, Nd, Pm, Sm, Gd, Tb, Dy, and Ho) in PNO and CeO 2 (111) surfaces. In addition to Nd, Pm and La are suggested as potential dopants in PNO to enhance it stability without decomposition due to their more negative formation energies, lower diffusion energies, and positive separation energies.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2023

Intermediate Temperature Proton‐Conducting Solid Oxide Electrolysis Cells with Improved Performance and Durability

Technical understanding: A high-performance and stable intermediate temperature proton-conducting solid oxide electrolysis cell (PCEC) will add significantly to the hydrogen roadmap of EERE. However, the low electrocatalytic activity of the air electrode and the instability of the electrolyte are technical barriers. In this research, we utilized computational fluid dynamic modeling and materials/microstructure engineering to investigate the complex reaction chain and to improve the performance and reliability of the protonic ceramic electrochemical cells. An active and stable Pr 1.8 Ba 0.2 NiO 4+δ -BaZr 0.1 Ce 0.7 Y 0.1 Yb 0.1 O 3-δ (BZCYYb) scaffold conformal coating electrode was rationally designed where the robust Pr 1.8 Ba 0.2 NiO 4+δ functions both as a catalytic active and a protective layer. The PCECs with porosity-optimized scaffold conformal coating electrodes demonstrate 1.46 Acm -2 under 1.3 V at 600°C, which is among the highest in recent years. The final optimization by computational fluid dynamic modeling and conformal coating technique was applied to evolve the PCEC air electrode from Pr 2 NiO 4+δ to Pr 1.8 Ba 0.2 NiO 4+δ -BaZr 0.1 Ce 0.7 Y 0.1 Yb 0.1 O 3-δ scaffold conformal coating. The electrolysis current was boosted from 0.445A/cm 2 to 1.46A/cm 2 at 600°C and 1.3V. A superior low degradation rate of 1mV/kh was achieved in a 5000-hour of operation. Technical effectiveness and economic feasibility: The effectiveness of this TCO conformal coating on electrolyte backbone as air electrode has been proven by long-term demonstration. Based on the highly conductive BZCYYb electrolyte and the TCO steam electrode PNO, this project rationally took advantage of the existent materials to structure a PCEC device with high TRL and low risk. The solution infiltration method used to structure the conformal coating is a standard method used by the solid oxide cell community. Very minimal adoption is needed in the current SOC fabrication process. It is a cost-effective, scalable method for manufacturing, and brings up remarkable impact on the current technical status of PCEC. Benefit to the public: The findings in the research showed the industry that the severe challenge in PCEC can be overcome in a practical way. A various energy-hydrogen ecosystem is not beyond reach. The success of this technology provides sustainable and affordable H 2 to society. It will stimulate investment from the governmental and private sectors in response to the device manufacture and deployment, and the related infrastructure construction. It will generate high-pay domestic jobs and environmental benefits to the general public in the United States.

08 HYDROGEN↗
DOE OSTI2023

Gallium Oxide Heterojunction Diodes for 400 °C High‐Temperature Applications

β ‐Ga 2 O 3 ‐based semiconductor devices are expected to have significantly improved high‐power and high‐temperature performance due to its ultrawide bandgap of close to 5 eV. However, the high‐temperature operation of these ultrawide‐bandgap devices is usually limited by the relatively low 1–2 eV built‐in potential at the Schottky barrier with most high‐work‐function metals. Herein, heterojunction p ‐NiO/n‐ β ‐Ga 2 O 3 diodes fabrication and optimization for high‐temperature device applications are reported, demonstrating a current rectification ratio ( I ON / I OFF ) of more than 10 6 at 410 °C. The NiO heterojunction diode can achieve higher turn‐on ( V ON ) voltage and lower reverse leakage current compared to the Ni‐based Schottky diode fabricated on the same single‐crystal β ‐Ga 2 O 3 substrate, despite charge transport dominated by interfacial recombination. Electrical characterization and device modeling show that these advantages are due to a higher built‐in potential and additional band offset. These results suggest that heterojunction p–n diodes based on β ‐Ga 2 O 3 can significantly improve high‐temperature electronic device and sensor performance.

Sohel, Shahadat H.↗