Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Nanomaterial”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Tailoring the Toughening Effects in Two-Dimensional Nanomaterial-Reinforced Ceramic Matrix Composites

Abstract Ceramic matrix composites (CMCs) reinforced by two-dimensional (2D) nanomaterials have shown extraordinary load-carrying capacities, even in the harsh environments required by emerging applications. Their exceptional mechanical performance, especially fracture toughness, primarily arises from their heterogeneous microstructures. The deliberate dispersion of 2D reinforcements enables toughening mechanisms that are extrinsic to the matrix and thus endows the composites with substantial resistance to catastrophic failure. However, the incomplete understanding of the fracture behavior of such nanocomposites, especially the complex energy dissipation process of the matrix/reinforcement interface, limits the development of stronger and tougher CMCs. To overcome these limitations, we investigate crack deflection and energy dissipation in nanocomposites using an extended cohesive shear-lag model. This new model accounts for interfacial debonding and friction, which critically control the toughening of nanocomposites. Our analysis provides mechanistic insights for optimizing the toughening effects of CMCs.

Mechanics↗
DOE OSTI2025

Plasmonic pathway to hybrid nanomaterials through energy transfer

Plasmon-induced resonance energy transfer (PIRET) is a promising approach for plasmonic photocatalysis and energy conversion, but challenges include elucidating the mechanism and maximizing its efficiency, both of which are hampered by competing processes. Another challenge is demonstrating that PIRET can photoinitiate reactions that follow efficient pathways compared to bulk processes. We report a plasmon-induced route to plasmonic-polymer hybrid nanomaterials using in operando single-particle spectroelectrochemistry. An energy transfer efficiency of 40% is achievable when the spectral overlap between gold nanorod scattering and polymer absorption is maximized. We also show that PIRET-initiated polymerization proceeds through a different mechanism than bulk polymerization, supported by spectroscopic evidence and density functional theory calculations, highlighting efficient energy cascading from photon to plasmon to exciton and, lastly, to unconventional light-initiated chemistry.

Oh, Hyuncheol [University of Illinois Urbana-Champ↗
DOE OSTI2024

Toward “super-scintillation” with nanomaterials and nanophotonics

Abstract Following the discovery of X-rays, scintillators are commonly used as high-energy radiation sensors in diagnostic medical imaging, high-energy physics, astrophysics, environmental radiation monitoring, and security inspections. Conventional scintillators face intrinsic limitations including a low extraction efficiency of scintillated light and a low emission rate, leading to efficiencies that are less than 10 % for commercial scintillators. Overcoming these limitations will require new materials including scintillating nanomaterials (“nanoscintillators”), as well as new photonic approaches that increase the efficiency of the scintillation process, increase the emission rate of materials, and control the directivity of the scintillated light. In this perspective, we describe emerging nanoscintillating materials and three nanophotonic platforms: (i) plasmonic nanoresonators, (ii) photonic crystals, and (iii) high-Q metasurfaces that could enable high performance scintillators. We further discuss how a combination of nanoscintillators and photonic structures can yield a “super scintillator” enabling ultimate spatio-temporal resolution while enabling a significant boost in the extracted scintillation emission.

Carr Delgado, Hamish↗
DOE OSTI2020

Chemical and physical transformations of carbon-based nanomaterials observed by liquid phase transmission electron microscopy

This article addresses recent advances in liquid phase transmission electron microscopy (LPTEM) for studying nanoscale synthetic processes of carbon-based materials that are independent of the electron beam—those driven by nonradiolytic chemical or thermal reactions. In particular, we focus on chemical/physical formations and the assembly of nanostructures composed of organic monomers/polymers, peptides/DNA, and biominerals. The synthesis of carbon-based nanomaterials generally only occurs at specific conditions, which cannot be mimicked by aqueous solution radiolysis. Carbon-based structures themselves are also acutely sensitive to the damaging effects of the irradiating beam, which make studying their synthesis using LPTEM a unique challenge that is possible when beam effects can be quantifi ed and mitigated. With new direct sensing, high frame rate cameras, and advances in liquid-cell holder designs, combined with a growing understanding of irradiation effects and proper experimental controls, microscopists have been able to make strides in observing traditionally problematic carbon-based materials under conditions where synthesis can be controlled, and imaged free from beam effects, or with beam effects quantified and accounted for. These materials systems and LPTEM experimental techniques are discussed, focusing on nonradiolytic chemical and physical transformations relevant to materials synthesis.

Parent, Lucas R.↗
DOE OSTI2024

Control of light-matter interactions in hybrid structured environments with novel nanomaterials of different dimensionalities

The project calls for exploration of individual nanomaterials and the ability to fabricate functional structures without degrading the properties of components. The rich photophysics of novel semiconductors like transition metal dichalcogenides (TMDs), lead halide perovskites (LHPs) and nanocrystal quantum dots (NQDs) can be gainfully exploited in integrated photonic structures alongside conventional semiconducting and dielectric materials. Realization of the prospects of such hybrid structures crucially depends on the ability to fabricate these “designer” assemblies while preserving and enhancing the optoelectronic properties of individual components. We study emission properties of these materials at both bulk and single particles levels to elucidate their intrinsic photophysical properties in order to minimize energy losses and facilitate their judicious integration via control of energy/charge flows and photon-exciton interconversions.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Green Synthesis of Multifunctional Nanomaterials

CONCLUSIONS • We demonstrate eco-friendly and green synthesis approaches of isotropic and anisotropic nanomaterials that meet our environmental stewardship needs: • Atom Economy: Maximize the incorporation of all materials used in a reaction into the final product. • Prevention: Prevent waste generation in the first place. • Less Hazardous Chemical Synthesis: Use and generate substances with low toxicity to humans and the environment. • Safer Solvents and Auxiliaries: Avoid or minimize the use of hazardous solvents.

Murph, Simona E. [Savannah River National Laborato↗
DOE OSTI2025

Establishing defect-property relationships for 2D-nanomaterials (Final technical report)

Studies of new families of two-dimensional nanomaterials (2DNMs) have established that they possess unique properties that diverge from those of their bulk counterparts. This project aimed to determine how tolerant 2DNMs are to extreme photon and particle fluxes and to identify the mechanisms governing their radiation response. Early work indicated that graphene is not as representative of other 2DNMs as previously assumed; however, the origin of this difference remained unclear. To address these knowledge gaps, this project investigated the physical processes occurring at multiple length scales in transition metal dichalcogenides (TMDs) and quantified their structural stability and property evolution under far-from-equilibrium conditions. In-situ and ex-situ ion and electron irradiations were performed to directly control and monitor defect formation in TMDs. Complementary density functional theory (DFT) and molecular dynamics (MD) simulations were employed to elucidate the mechanisms of defect generation and evolution. The outcomes of this work established mechanistic understanding of irradiation-induced defect formation in 2DNMs, quantified the radiation tolerance of TMDs, and built a fundamental knowledge base for correlating defect structures with material properties. Collectively, these results provide new insights into the stability of low-dimensional materials in extreme environments and enable the predictive design of radiation-tolerant 2DNMs.

2D materials↗
DOE OSTI2023

Review on Hybrid Reinforced Polymer Matrix Composites with Nanocellulose, Nanomaterials, and Other Fibers

The use of composite materials has seen many new innovations for a large variety of applications. The area of reinforcement in composites is also rapidly evolving with many new discoveries, including the use of hybrid fibers, sustainable materials, and nanocellulose. In this review, studies on hybrid fiber reinforcement, the use of nanocellulose, the use of nanocellulose in hybrid forms, the use of nanocellulose with other nanomaterials, the applications of these materials, and finally, the challenges and opportunities (including safety issues) of their use are thoroughly discussed. This review will point out new prospects for the composite materials world, enabling the use of nano- and micron-sized materials together and creating value-added products at the industrial scale. Furthermore, the use of hybrid structures consisting of two different nano-materials creates many novel solutions for applications in electronics and sensors.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Modeling Carbon-Based Nanomaterials (CNMs) and Derived Composites and Devices

A review of different modeling techniques, specifically in the framework of carbon-based nanomaterials (CNMs, including nanoparticles such as graphene and carbon nanotubes—CNTs) and the composites and devices that can be derived from them, is presented. The article emphasizes that the overall performance of these materials depends on mechanisms that operate across different time and spatial scales, requiring tailored approaches based on the material type, size, internal structure/configuration, and the specific properties of interest. Far from attempting to cover the entire spectrum of models, this review examines a wide range of analysis and simulation techniques, highlighting their potential use, some of their weaknesses and strengths, and presenting the latest developments and some application examples. In this way, it is shown how modeling can provide key information for tailoring or designing new materials for specific components or systems or to obtain certain functionalities. At the same time, it is revealed to be an area constantly undergoing development and improvement, as evidenced by the progress made by various of these techniques and the new modeling approaches that have emerged in recent years.

Chiminelli, Agustίn (ORCID:0000000230312107)↗
NASA NTRS2006

Nanomaterials for Advanced Life Support in Advanced Life Support in Space systems

A viewgraph presentation describing nanomaterial research at NASA Johnson Space Center with a focus on advanced life support in space systems is shown. The topics include: 1) Introduction; 2) Research and accomplishments in Carbon Dioxide Removal; 3) Research and Accomplishments in Water Purification; and 4) Next Steps

Allada, Rama Kumar↗
NASA NTRS2005

Nanomaterials Work at NASA-Johnson Space Center

Nanomaterials activities at NASA-Johnson Space Center focus on single wall carbon nanotube production, characterization and their applications for aerospace. Nanotubes are produced by arc and laser methods and the growth process is monitored by in-situ diagnostics using time resolved passive emission and laser induced fluorescence of the active species. Parametric study of both these processes are conducted to monitor the effect of production parameters including temperature, buffer gas, flow rate, pressure, laser fluence and arc current. Characterization of the nanotube material is performed using the NASA-JSC protocol developed by combining analytical techniques of SEM, TEM, UV-VIS-NIR absorption, Raman, and TGA. Efforts at JSC over the past five years in composites have centered on structural polymernanotube systems. Recent activities broadened this focus to multifunctional materials, supercapacitors, fuel cells, regenerable CO2 absorbers, electromagnetic shielding, radiation dosimetry and thermal management systems of interest for human space flight. Preliminary tests indicate improvement of performance in most of these applications because of the large surface area as well as high conductivity exhibited by SWCNTs.

Arepalli, Sivaram↗
NASA NTRS2008

Novel Carbon Dioxide Microsensor Based on Tin Oxide Nanomaterial Doped With Copper Oxide

Carbon dioxide (CO2) is one of the major indicators of fire and therefore its measurement is very important for low-false-alarm fire detection and emissions monitoring. However, only a limited number of CO2 sensing materials exist due to the high chemical stability of CO2. In this work, a novel CO2 microsensor based on nanocrystalline tin oxide (SnO2) doped with copper oxide (CuO) has been successfully demonstrated. The CuO-SnO2 based CO2 microsensors are fabricated by means of microelectromechanical systems (MEMS) technology and sol-gel nanomaterial-synthesis processes. At a doping level of CuO: SnO2 = 1:8 (molar ratio), the resistance of the sensor has a linear response to CO2 concentrations for the range of 1 to 4 percent CO2 in air at 450 C. This approach has demonstrated the use of SnO2, typically used for the detection of reducing gases, in the detection of an oxidizing gas.

Xu, Jennifer C.↗
NASA NTRS2011

Nanomaterials for Electronics and Optoelectronics

Nanomaterials such as carbon nanotubes(CNTs), graphene, and inorganic nanowires(INWs) have shown interesting electronic, mechanical, optical, thermal, and other properties and therefore have been pursued for a variety of applications by the nanotechnology community ranging from electronics to nanocomposites. While the first two are carbon-based materials, the INWs in the literature include silicon, germanium, III-V, II-VI, a variety of oxides, nitrides, antimonides and others. In this talk, first an overview of growth of these three classes of materials by CVD and PECVD will be presented along with results from characterization. Then applications in development of chemical sensors, biosensors, energy storage devices and novel memory architectures will be discussed.

Koehne, Jessica E.↗
NASA NTRS2013

Evaluation of Nanomaterial Approaches to Damping in Epoxy Resin and Carbon Fiber/Epoxy Composite Structures by Dynamic Mechanical Analysis

Vibration mitigation in composite structures has been demonstrated through widely varying methods which include both active and passive damping. Recently, nanomaterials have been investigated as a viable approach to composite vibration damping due to the large surface available to generate energy dissipation through friction. This work evaluates the influence of dispersed nanoparticles on the damping ratio of an epoxy matrix. Limited benefit was observed through dispersion methods, however nanoparticle application as a coating resulting in up to a three-fold increase in damping.

Miller, G.↗
DOE OSTI2021

Flame based fluidized bed reactor for nanomaterials production

The present development is a reactor system for the production of nanostructures. The reactor system comprises a conical reactor body designed to maintain an upwardly directed vertical plasma flame and hydrocarbon flame. The reactor system further includes a metal powder feed that feeds into the plasma flame, a cyclone and a dust removal unit. The system is designed to produce up to 100 grams of metal oxide nanomaterials per minute.

Sunkara, Mahendra↗
DOE OSTI2023

Method for attaching nanomaterials comprising hexagonal lattices to polymer surfaces

The invention is directed to a method for attaching nanomaterials containing hexagonal lattices to polymer surfaces. For example, carbon nanotubes (CNTs) can be attached to polycarbonate, polyethylene, or epoxy surfaces by amination of the polymer surface, functionalization of the surfaces of CNTs with ester groups, and reacting the aminated surface of the polymer with the ester groups of the functionalized surfaces of the CNTs in an organic solvent to chemically bind the CNTs to the polymer surface.

Redline, Erica Marie↗
DOE OSTI2024

Investigating the impact of donor atoms of single-source precursors on f-element nanomaterial formation and mechanisms of initial bond cleavage

Nanotechnology is advancing exponentially, with novel discoveries and applications emerging every day across various fields, including environmental remediation, biomedicine, electronics, and textiles. Nanoparticles (NPs) are defined as particles with sizes ranging from 1 to 100 nm, and their properties are influenced by factors such as composition, phase, size, and shape. Single-source precursors (SSPs) offer a promising method for controlling the synthesis of phase-pure nanoparticles with the desired stoichiometry and have been successfully applied to prepare transition metal and lanthanide NPs. SSPs are molecular compounds that contain all the necessary components to form the final nanomaterial and decompose under mild conditions, such as heating, to create the solid-state product. The objective of this work was to garner a mechanistic understanding of cerium oxide NP formation from cerium SSPs. To achieve these goals, first, ligands with oxygen and sulfur donor atoms were synthesized; among the array of ligands synthesized, some were novel. These ligands were then chelated to cerium ions to synthesize cerium precursors. Initially, known cerium alkoxide precursors were synthesized. Subsequently, these basic cerium complexes were further manipulated through acid-base protonolysis reactions to install a diverse set of ligands. Within this body of work, 10 novel cerium precursors were successfully synthesized. The ligands and the SSPs were analyzed using nuclear magnetic resonance (NMR) and thermogravimetric analysis coupled with differential scanning calorimetry (TGA-DSC). These SSPs were then introduced to a collision-induced dissociation mass spectrometer (CID-MS), and their dissociation pathways were studied.

37 - INORGANIC, ORGANIC, PHYSICAL AND ANALYTICAL C↗