Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “NaN”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Heavily Tungsten–Doped Sodium Thioantimonate Solid–State Electrolytes with Exceptionally Low Activation Energy for Ionic Diffusion

A strategy for modifying the structure of solid-state electrolytes (SSEs) to reduce the cation diffusion activation energy is presented. Two heavily W-doped sodium thioantimonate SSEs, Na 2.895 W 0.3 Sb 0.7 S 4 and Na 2.7 W 0.3 Sb 0.7 S 4 are designed, both exhibiting exceptionally low activation energy and enhanced room temperature (RT) ionic conductivity; 0.09 eV, 24.2 mS/cm and 0.12 eV, 14.5 mS/cm. At –15 °C the Na 2.895 W 0.3 Sb 0.7 S 4 displays a total ionic conductivity of 5.5 mS/cm. Here, the 30 % W content goes far beyond the 10–12 % reported in the prior studies, and results in novel pseudo-cubic or orthorhombic structures. Calculations reveal that these properties result from a combination of multiple diffusion mechanisms, including vacancy defects, strongly correlated modes and excessive Na-ions. An all-solid-state battery (ASSB) using Na 2.895 W 0.3 Sb 0.7 S 4 as the primary SSE and a sodium sulfide (Na 2 S) cathode achieves a reversible capacity of 400 mAh g –1 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Salt‐in‐Salt Reinforced Carbonate Electrolyte for Li Metal Batteries

Abstract The instability of carbonate electrolyte with metallic Li greatly limits its application in high‐voltage Li metal batteries. Here, a “salt‐in‐salt” strategy is applied to boost the LiNO 3 solubility in the carbonate electrolyte with Mg(TFSI) 2 carrier, which enables the inorganic‐rich solid electrolyte interphase (SEI) for excellent Li metal anode performance and also maintains the cathode stability. In the designed electrolyte, both NO 3 − and PF 6 − anions participate in the Li + ‐solvent complexes, thus promoting the formation of inorganic‐rich SEI. Our designed electrolyte has achieved a superior Li CE of 99.7 %, enabling the high‐loading NCM811||Li (4.5 mAh cm −2 ) full cell with N/P ratio of 1.92 to achieve 84.6 % capacity retention after 200 cycles. The enhancement of LiNO 3 solubility by divalent salts is universal, which will also inspire the electrolyte design for other metal batteries.

Liu, Sufu↗
DOE OSTI2023

High‐Performance Lithium Metal Batteries Enabled by a Fluorinated Cyclic Ether with a Low Reduction Potential

Abstract Electrolyte engineering is crucial for developing high‐performance lithium metal batteries (LMB). Here, we synthesized two cosolvents methyl bis(fluorosulfonyl)imide (MFSI) and 3,3,4,4‐tetrafluorotetrahydrofuran (TFF) with significantly different reduction potentials and add them into LiFSI‐DME electrolytes. The LiFSI/TFF‐DME electrolyte gave an average Li Coulombic efficiency (CE) of 99.41 % over 200 cycles, while the average Li CEs for MFSI‐based electrolyte is only 98.62 %. Additionally, the TFF‐based electrolytes exhibited a more reversible performance than the state‐of‐the‐art fluorinated 1,4‐dimethoxylbutane electrolyte in both Li||Cu half‐cell and anode‐free Cu||LiNi 0.8 Mn 0.1 Co 0.1 O 2 full cell. More importantly, the decomposition product from bis(fluorosulfonyl)imide anion could react with ether solvent, which destroyed the SEI, thus decreasing cell performance. These key discoveries provide new insights into the rational design of electrolyte solvents and cosolvents for LMB.

Wu, Min↗
DOE OSTI2020

An Inorganic-Rich Solid Electrolyte Interphase for Advanced Lithium-Metal Batteries in Carbonate Electrolytes

In carbonate electrolytes, the organic-inorganic solid electrolyte interphase (SEI) formed on the lithium (Li) metal anode surface is strongly bonded to Li and experiences the same volume change as Li, thus it undergoes continuous cracking/reformation during plating/stripping cycles. Here we report, an inorganic-rich SEI is designed on a Li metal surface to reduce its bonding energy with Li metal by dissolving 4 M concentrated LiNO 3 in dimethyl sulfoxide (DMSO) as an additive for a fluoroethylene carbonate (FEC) based electrolyte. Due to the aggregate structure of NO 3 - ions and its participation in the primary Li + solvation sheath, abundant Li 2 O, Li 3 N, and LiN x O y grains are formed in the resulting SEI, in addition to the uniform LiF distribution from the reduction of PF 6 - ions. The inorganic-rich SEI’s weak bonding (high interface energy) to Li can effectively promote Li diffusion along the SEI/Li interface and prevent Li dendrite penetration into the SEI. As a result, our designed carbonate electrolyte enables a Li anode to achieve a high Li plating/stripping CE of 99.55% (1 mA cm -2 , 1.0 mAh cm -2 ) and the electrolyte also enables a Li||LiNi 0.8 Co 0.1 Mn 0.1 O 2 (NMC811) full cell (2.5 mAh cm -2 ) to retain 75%of its initial capacity after 200 cycles with an outstanding CE of 99.83%.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Heavily Tungsten-Doped Sodium Thioantimonate Solid-State Electrolytes with Exceptionally Low Activation Energy for Ionic Diffusion

A strategy for modifying the structure of solid-state electrolytes (SSEs) to reduce the cation diffusion activation energy is presented. Two heavily W-doped sodium thioantimonate SSEs, Na 2.895 W 0.3 Sb 0.7 S 4 and Na 2.7 W 0.3 Sb 0.7 S 4 are designed, both exhibiting exceptionally low activation energy and enhanced room temperature (RT) ionic conductivity; 0.09 eV, 24.2 mS/cm and 0.12 eV, 14.5 mS/cm. At –15 °C the Na 2.895 W 0.3 Sb 0.7 S 4 displays a total ionic conductivity of 5.5 mS/cm. The 30 % W content goes far beyond the 10–12 % reported in the prior studies, and results in novel pseudo-cubic or orthorhombic structures. Here, calculations reveal that these properties result from a combination of multiple diffusion mechanisms, including vacancy defects, strongly correlated modes and excessive Na-ions. An all-solid-state battery (ASSB) using Na 2.895 W 0.3 Sb 0.7 S 4 as the primary SSE and a sodium sulfide (Na 2 S) cathode achieves a reversible capacity of 400 mAh g –1 .

sodium metal battery (SMB)↗
DOE OSTI2022

Salt‐in‐Salt Reinforced Carbonate Electrolyte for Li Metal Batteries

Abstract The instability of carbonate electrolyte with metallic Li greatly limits its application in high‐voltage Li metal batteries. Here, a “salt‐in‐salt” strategy is applied to boost the LiNO 3 solubility in the carbonate electrolyte with Mg(TFSI) 2 carrier, which enables the inorganic‐rich solid electrolyte interphase (SEI) for excellent Li metal anode performance and also maintains the cathode stability. In the designed electrolyte, both NO 3 − and PF 6 − anions participate in the Li + ‐solvent complexes, thus promoting the formation of inorganic‐rich SEI. Our designed electrolyte has achieved a superior Li CE of 99.7 %, enabling the high‐loading NCM811||Li (4.5 mAh cm −2 ) full cell with N/P ratio of 1.92 to achieve 84.6 % capacity retention after 200 cycles. The enhancement of LiNO 3 solubility by divalent salts is universal, which will also inspire the electrolyte design for other metal batteries.

25 ENERGY STORAGE↗
DOE OSTI2022

Unveiling the High-valence Oxygen Degradation Across the Delithiated Cathode Surface

Charge compensation on anionic redox reaction (ARR) has been promising to realize extra capacity beyond transition metal redox in battery cathodes. The practical development of ARR capacity has been hindered by high-valence oxygen instability, particularly at cathode surfaces. However, the direct probe of surface oxygen behavior has been challenging. Here, the electronic states of surface oxygen are investigated by combining mapping of resonant Auger electronic spectroscopy (mRAS) and ambient pressure X-ray photoelectron spectroscopy (APXPS) on a model LiCoO 2 cathode. The mRAS verified that no high-valence oxygen can sustain at cathode surfaces, while APXPS proves that cathode electrolyte interphase (CEI) layer evolves and oxidizes upon oxygen gas contact. In conclusion, this work provides valuable insights into the high-valence oxygen degradation mode across the interface. Oxygen stabilization from surface architecture is proven a prerequisite to the practical development of ARR active cathodes.

25 ENERGY STORAGE↗
DOE OSTI2023

High‐Performance Lithium Metal Batteries Enabled by a Fluorinated Cyclic Ether with a Low Reduction Potential

Abstract Electrolyte engineering is crucial for developing high‐performance lithium metal batteries (LMB). Here, we synthesized two cosolvents methyl bis(fluorosulfonyl)imide (MFSI) and 3,3,4,4‐tetrafluorotetrahydrofuran (TFF) with significantly different reduction potentials and add them into LiFSI‐DME electrolytes. The LiFSI/TFF‐DME electrolyte gave an average Li Coulombic efficiency (CE) of 99.41 % over 200 cycles, while the average Li CEs for MFSI‐based electrolyte is only 98.62 %. Additionally, the TFF‐based electrolytes exhibited a more reversible performance than the state‐of‐the‐art fluorinated 1,4‐dimethoxylbutane electrolyte in both Li||Cu half‐cell and anode‐free Cu||LiNi 0.8 Mn 0.1 Co 0.1 O 2 full cell. More importantly, the decomposition product from bis(fluorosulfonyl)imide anion could react with ether solvent, which destroyed the SEI, thus decreasing cell performance. These key discoveries provide new insights into the rational design of electrolyte solvents and cosolvents for LMB.

25 ENERGY STORAGE↗
DOE OSTI2022

An Anomalous Electron Configuration Among 3d Transition Metal Atoms

Physical properties of materials are mainly determined by valence electron configurations, where different valence shells would induce divergent phenomena. In compounds containing Sc 2+ , 3d electron occupancy is expected, same as other transition metal atoms like Ti 3+ . But this situation still awaits experimental verification. In this work, we selected ScS to measure the valence electron density and orbital population of Sc2+ through delicate quantitative convergent-beam electron diffraction. Though the [Ar]3d 1 configuration is confirmed in ionic Sc 2+ , the unintuitive occupation of 4s orbital is concluded with the absence of 3d orbital features around Sc-atom sites and nearly bare population of t2g orbital. It should be the first time to report this special electron configuration in a transition metal compound, in which 4s rather than 3d orbital is preferred. Our findings reveal the distinct behavior of Sc, and probable ways to modulate material properties by controlling electron orbitals.

36 MATERIALS SCIENCE↗
DOE OSTI2023

High‐Entropy Lithium Argyrodite Solid Electrolytes Enabling Stable All‐Solid‐State Batteries

Abstract Superionic solid electrolytes (SEs) are essential for bulk‐type solid‐state battery (SSB) applications. Multicomponent SEs are recently attracting attention for their favorable charge‐transport properties, however a thorough understanding of how configurational entropy (ΔS conf ) affects ionic conductivity is lacking. Here, we successfully synthesized a series of halogen‐rich lithium argyrodites with the general formula Li 5.5 PS 4.5 Cl x Br 1.5‐x (0≤x≤1.5). Using neutron powder diffraction and 31 P magic‐angle spinning nuclear magnetic resonance spectroscopy, the S 2− /Cl − /Br − occupancy on the anion sublattice was quantitatively analyzed. We show that disorder positively affects Li‐ion dynamics, leading to a room‐temperature ionic conductivity of 22.7 mS cm −1 (9.6 mS cm −1 in cold‐pressed state) for Li 5.5 PS 4.5 Cl 0.8 Br 0.7 (ΔS conf =1.98R). To the best of our knowledge, this is the first experimental evidence that configurational entropy of the anion sublattice correlates with ion mobility. Our results indicate the possibility of improving ionic conductivity in ceramic ion conductors by tailoring the degree of compositional complexity. Moreover, the Li 5.5 PS 4.5 Cl 0.8 Br 0.7 SE allowed for stable cycling of single‐crystal LiNi 0.9 Co 0.06 Mn 0.04 O 2 (s‐NCM90) composite cathodes in SSB cells, emphasizing that dual‐substituted lithium argyrodites hold great promise in enabling high‐performance electrochemical energy storage.

Chemistry↗
DOE OSTI2026

Preparation and Photocatalytic Hydrogen Production of TiO 2 /(AlMnCoNiZn) 3 O 4 Nanocomposites

Photocatalytic water splitting is a promising strategy for addressing the global energy crisis and environmental pollution. In this study, spinel-type high-entropy oxide (HEO) nanoparticles, (AlMnCoNiZn) 3 O 4 , were successfully synthesized via a solution combustion method. TiO 2 /(AlMnCoNiZn) 3 O 4 nanocomposites with varying molar ratios were subsequently fabricated through solid-state sintering, and their photocatalytic water-splitting performance was systematically investigated. The hydrogen production rate initially increased and then decreased with increasing TiO 2 content. The optimal nanocomposite achieved a hydrogen evolution rate of 1450 μmol·h −1 ·g −1 under simulated sunlight irradiation, which is 2.2 times higher than that of pure TiO 2 nanoparticles. In addition, the TiO 2 /(AlMnCoNiZn) 3 O 4 nanocomposites exhibited significantly improved photocorrosion resistance compared with TiO 2 nanoparticles. After 12 h irradiation under a 500-W high-pressure mercury lamp, the hydrogen production rates of the nanocomposites and pure TiO 2 retained 79.3% and 5.47% of their initial values, respectively. These results demonstrate the important role of (AlMnCoNiZn) 3 O 4 and other HEOs in enhancing the photocatalytic performance of nanoheterojunction catalysts. Lastly, this work broadens the potential applications of (AlMnCoNiZn) 3 O 4 and related HEO materials in the field of photocatalysis.

Heterojunction↗
DOE OSTI2024

Evaluating the potential of disaggregated memory systems for HPC applications

Summary Disaggregated memory is a promising approach that addresses the limitations of traditional memory architectures by enabling memory to be decoupled from compute nodes and shared across a data center. Cloud platforms have deployed such systems to improve overall system memory utilization, but performance can vary across workloads. High‐performance computing (HPC) is crucial in scientific and engineering applications, where HPC machines also face the issue of underutilized memory. As a result, improving system memory utilization while understanding workload performance is essential for HPC operators. Therefore, learning the potential of a disaggregated memory system before deployment is a critical step. This paper proposes a methodology for exploring the design space of a disaggregated memory system. It incorporates key metrics that affect performance on disaggregated memory systems: memory capacity, local and remote memory access ratio, injection bandwidth, and bisection bandwidth, providing an intuitive approach to guide machine configurations based on technology trends and workload characteristics. We apply our methodology to analyze thirteen diverse workloads, including AI training, data analysis, genomics, protein, fusion, atomic nuclei, and traditional HPC bookends. Our methodology demonstrates the ability to comprehend the potential and pitfalls of a disaggregated memory system and provides motivation for machine configurations. Our results show that eleven of our thirteen applications can leverage injection bandwidth disaggregated memory without affecting performance, while one pays a rack bisection bandwidth penalty and two pay the system‐wide bisection bandwidth penalty. In addition, we also show that intra‐rack memory disaggregation would meet the application's memory requirement and provide enough remote memory bandwidth.

Ding, Nan↗
DOE OSTI2026

Will Nontoxic High‐Performance Perovskite Photovoltaics Ever Be Possible?

Lead-based halide perovskite solar cells represent a significant advancement in photovoltaic technology, achieving certified power conversion efficiencies of over 27%. However, the toxicity of lead poses a major barrier to widespread commercialization. The demand for environmentally safe alternatives has driven extensive research into Pb-free perovskites. Current efforts include replacing Pb with Sn or Ge; forming double perovskites in which Pb is substituted by a monovalent–trivalent cation pair; and developing chalcogenide perovskites where the B site (ABX 3 ) adopts tetravalent cations (rather than Pb) to balance the charge. This concept examines the recent progress in developing Pb-free alternatives, revealing fundamental performance bottlenecks, inherent material limitations, and persistent development challenges. Through a comparative assessment of material properties and device performance limitations, this work highlights the underlying dilemma between environmental safety and efficiency in perovskite photovoltaics. The analysis identifies fundamental material constraints that create substantial barriers to simultaneously achieving both objectives.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Inclusion Complexes of a Metastable‐State Photoacid with High Acidity and Chemical Stability

Abstract Metastable‐state merocyanine photoacids (MCHs) have been widely applied to various chemical, material and biomedical areas to drive or control chemical processes with light. In this work, stoichiometry and association constants have been determined for inclusion complexes of a photoacid MCH1 ((E)‐3‐(2‐(2‐hydroxystyryl)‐3,3‐dimethyl‐3H‐indol‐1‐ium‐1‐yl)propane‐1‐sulfonate) withβ‐cyclodextrin (β‐CD), 2‐hydroxypropyl‐β‐CD (HP‐β‐CD),γ‐CD and HP‐γ‐CD by means of UV‐Vis absorption spectroscopic titrations. The inclusion complexes were studied to enhance acidity and chemical stability. Kinetic study showed that CDs stabilized the acidic metastable state and slowed its thermal relaxation. The acidity of the ground and metastable state (pK a GS and pK a MS ) increased upon addition of CDs. The pK a MS of [MCH1 ⋅ (γ‐CD) 2 ] is as low as 0.92 in comparison with 2.24 for MCH1, which is close to the lowest pK a MS values (1.20 and 1.03) reported previously, in which case the MCH1 was structurally modified with alkylammonium side chains. Addition of CDs also significantly enhanced the chemical stability of MCH1 against hydrolysis, which is one of the major concerns for the application of MCHs. In particular, the addition of HP‐β‐CD increased the half‐life of MCH1 in aqueous solution more than four‐fold. Moreover, the quantum chemical calculations confirmed the stoichiometry and analyzed the binding sites and hydrogen bonds of the inclusion complexes.

Chemistry↗
DOE OSTI2020

Effects of different pretreatment methods on the drying characteristics and quality of potatoes

Abstract The effects of different pretreatments on the vitamin C content of peeled fresh potato, the drying characteristics, and several quality attributes of dehydrated potatoes were investigated. Citric acid pretreatment (0.1%–0.3%, 10–30 min), steam blanching (100ºC, 1–2 min), and water blanching (95°C, 1–2 min) were found to have no obvious effect on the drying rate of potatoes, whereas temperature was the main influencing factor. In terms of quality of dehydrated diced potato, 20 min of citric acid pretreatment resulted in the highest vitamin C retention and better color. Furthermore, dehydrated potato pretreated with citric acid all showed similar dynamic moisture adsorption curves, namely type II sorption isotherm. The moisture adsorption curves can be well fitted using the Guggenheim–Anderson–deBoer model with R 2 higher than .97.

Sun, Xiangfeng↗
DOE OSTI2020

Orbital Hybridization and Magnetic Coupling at Cuprate–Manganite Interfaces Driven by Manganite Doping

Fundamental understanding of interface mechanisms that generate unexpected physical properties in the cuprate/manganite heterostructures is essential for possible applications as spintronic devices. In this study, CaCuO 2 /La 1–x Sr x MnO 3 (CCO/LSMO) superlattices are investigated, where the infinite-layer cuprate CCO does not have apical oxygen for Cu in the Ca-plane so that the Mn–O–Cu superexchange coupling can be only present at the MnO 2 –(La,Sr)O–CuO 2 interface. Two different doping states for the manganites are studied, namely x = 0.1 and x = 0.3, corresponding to the ferromagnetic insulating and ferromagnetic metallic states, respectively, in the manganite phase diagram. Linear and circular dichroism in X-ray absorption by synchrotron radiation at Cu and Mn L-edges clearly demonstrate that in the absence of apical oxygen in the cuprate block, the magnetic coupling between the LSMO and CCO is weakly ferromagnetic when LSMO is metallic, while it is antiferromagnetic when LSMO is insulating, along with an increased Cu 3d(3z 2 –r 2 ) and Mn 3d(3z 2 –r 2 ) orbital occupation. It is proposed that the Mn 3d valence band upward shift driven by the enhancement of Mn 3+ content in the underdoped sample enhances the orbital hybridization. The stronger hybridization at the interface MnO 2 –(La,Sr)O–CuO 2 gives rise to the antiferromagnetic coupling between cuprate and underdoped manganite.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Highly Enhanced Curie Temperature in Ga-Implanted Fe3GeTe2 van der Waals Material

Among many efforts in the research of van der Waals (vdW) magnetic materials, increasing the Curie temperature above room temperature has been at the center of research in developing spintronics technology using vdW materials. Here an effective and reliable method of increasing the Curie temperature of ferromagnetic Fe3GeTe2 vdW materials by Ga implantation is reported. It is found that implanting Ga into Fe3GeTe2 by the amount of 10-3 Ga Å-3 could greatly enhance the Fe3GeTe2 Curie temperature by almost 100%. Spatially resolved microdiffraction and element-resolved X-ray absorption spectroscopy show little changes in the Fe3GeTe2 crystal structure and Fe valence state. In addition, the Ga implantation changes the Fe3GeTe2 magnetization from out-of-plane direction at low temperature to in-plane direction at high temperature. The result opens a new opportunity for tailoring the magnetic properties of vdW materials beyond room temperature.

Yang, M↗
DOE OSTI2022

The Importance of Nonequilibrium to Equilibrium Transition Pathways for the Efficiency and Stability of Organic Solar Cells

Controlled morphology of solution-processed thin films have realized impressive achievements for non-fullerene acceptor (NFA)–based organic solar cells (OSCs). Given the large set of donor–acceptor pairs, employing various processing conditions to realize optimal morphology for high efficiency and stable OSCs is a strenuous task. Therefore, comprehensive correlations between processing conditions and morphology evolution pathways have to be developed for efficient performance and stability of devices. Within the framework of the blend system, crystallization transitions of NFA molecules are tracked utilizing the first heating scan of differential scanning calorimeter (DSC) measurement correlating with respective morphology evolution of blend films. Real-time dynamics measurements and morphology characterizations are combined to provide optimal morphology transition pathways as NFA molecules are shown to be released from the mixed phase to form balanced ordered packing with variant processing conditions. Polymer:NFA films are fabricated using blade coating incorporating solvent additive or thermal annealing as processing conditions as a correlation is formulated between performance and stability of solar cells with morphology transition pathways. In conclusion, this work demonstrates the significance of processing condition-controlled transition pathways for the realization of optimal morphology leading to superior OSC devices.

14 SOLAR ENERGY↗