Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “NaF”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Tribocorrosion of stainless steel sliding against graphite in FLiNaK molten salt

The molten salt reactor (MSR) concept recently gained renewed interest in developing Generation IV nuclear reactors. One MSR design uses fluoride molten salts to cool tri-structural isotropic particle fuel encapsulated by a carbon matrix into spherical pebbles, which would inevitably contact the reactor's stainless steel container wall during salt circulation. Characterizing this interaction is crucial for reactor safety. Here, in this work, we report the tribocorrosion behavior of graphite sliding against Type 316H stainless steel lubricated by a FLiNaK (LiF:NaF:KF; 46.5:11.5:42 mol %) molten salt in an argon environment. Accelerated wear loss was observed at a higher temperature because of a lower molten salt viscosity and a higher corrosion rate. The graphite had a more rapid material loss at a higher sliding speed than stainless steel because of its higher vulnerability to vibration-induced microfracture. The salt-starved condition caused more material loss than either the no-salt or the salt-flooded condition because neither a graphite transfer film nor stable boundary lubrication could be established at salt starvation. An interesting dual-layer surface film was discovered on the stainless steel worn surface: a chromium-rich top film and a nickel-accumulated but chromium-depleted interlayer. The film composition and structure provide fundamental insights to the mechanochemical interactions between stainless steel and graphite in a molten salt environment.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2025

Thermochemical Properties of a Water-Soluble Zr(IV)-Flavonolate Complex for Fluoride Sensing

Detection of fluoride in water samples is critical for monitoring many chemical, environmental, and biological processes, however, these measurements often rely on costly instrumentation. Here, this situation has motivated the design of simple to use, fieldable fluoride sensors. Previously, a fluorometric sensor based on (EDTA)­Zr­(H 2 O) 2 (EDTA = ethylenediamine-N,N,N′,N′-tetraacetate) and 3-hydroxyflavone (FlvH) was reported for fluoride detection in ethanol-H 2 O mixtures. Herein, we report the synthesis and characterization of the previously proposed Zr­(IV)-flavonolate complex as the dimethylammonium salt, [(EDTA)­Zr­(Flv)]­[NMe 2 H 2 ] (Flv = 3-hydroxyflavonolate), and detail its utility for aqueous fluoride sensing. This species exhibits an intense blue fluorescence upon excitation with near-UV light (λ ex = 390 nm; λ em = 460 nm) that is quenched in the presence of NaF (100 mM acetate buffer, pH = 5) with good sensitivity (LOD = 20.9 nM; [F – ] from 10 –8 to 10 –4 M) under neat aqueous conditions. The equilibrium constant (K eq = 1.26 ± 0.00184 × 10 8 M –2 ) and free energy (Δ$G^°_{\textrm{rxn}}$ = –11.0 kcal mol –1 ) were determined under the conditions used for fluoride sensing, indicating a highly favorable reaction with F – in water. Finally, we developed paper-based sensing strips for qualitative fluoride sensing by immobilizing the sensor in a deposited gel enabling good selectivity and reduced interference due to slower ion diffusion.

aqueous chemistry↗
DOE OSTI2020

Unmasking Static Correlation Error in Hybrid Kohn–Sham Density Functional Theory

To uncover the way Hartree–Fock exchange brings static correlation error into hybrid Kohn–Sham density functional theory, we compare the potential energy curves of four diatomic molecules, namely, H 2 , F 2 , HF, and NaF, using both restricted and unrestricted Kohn–Sham theory. Here, we find that increasing the percentage of Hartree–Fock exchange significantly increases the static correlation error because Hartree–Fock exchange replaces the ability of local exchange in density functionals to account for the localization effects associated with static correlation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Comparative Studies of the Structural and Transport Properties of Molten Salt FLiNaK Using the Machine-Learned Neural Network and Reparametrized Classical Forcefields

Despite surging interest in molten salt reactors and thermal storage systems, knowledge of the physicochemical properties of molten salts are still inadequate due to demanding experiments that require high temperature, impurity control, and corrosion mitigation. Therefore, the ability to predict these properties for molten salts from first-principles computations is urgently needed. Herein, we developed and compared a machine-learned neural network force field (NNFF) and a reparametrized rigid ion model (RIM) for a prototypical molten salt LiF–NaF–KF (FLiNaK). We found that NNFF was able to reproduce both the structural and transport properties of the molten salt with first-principles accuracy and classical-MD computational efficiency. Furthermore, the correlation between the local atomic structures and the dynamics was identified by comparing with RIMs, suggesting the significance of polarization of anions implicitly embedded in the NNFF. Furthermore, this work demonstrated a computational framework that can facilitate the screening of molten salts with different chemical compositions, impurities, and additives, and at different thermodynamic conditions suitable for the next-generation nuclear reactors and thermal energy storage facilities.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Self-Diffusivity Measurement of Eutectic F 7 LiNaK with and without Additives Using Quasi-Elastic Neutron Scattering

The atomic scale relaxation dynamics of eutectic F 7 LiNaK (46.5 LiF–11.5 NaF–42 KF mol %, Li-7 enriched) were measured using quasi-elastic neutron scattering (QENS) over a temperature range of 500–750 °C. Here, the effect of adding 0.988 mol % cerium, 0.499 mol % cesium, and 1.21 mol % zirconium individually to the dynamics of F 7 LiNaK was also investigated. The relaxation process in both pure and doped F 7 LiNaK molten salts was fit with a stretched exponential function and the temperature dependence follows an Arrhenius behavior over a wavevector transfer range of 0.4 Å –1 < Q < 0.9 Å –1 . The measured activation energy for self-diffusion is E a = 0.77 ± 0.02 eV/atom for pure molten F 7 LiNaK. The QENS response with additives added to F 7 LiNaK was also fit with a stretched exponential and the associated Arrhenius behavior was characterized with activation energies of E a = 0.88 ± 0.01 eV/atom for zirconium (1.21 mol %), E a = 1.02 ± 0.02 eV/atom for cerium (0.988 mol %), and E a = 0.71 ± 0.03 eV/atom for cesium (0.499 mol %). The measured diffusivities are compared to those simulated with a neural network force field model by Lee et al. [Lee, S.-C. Comparative Studies of the Structural and Transport Properties of Molten Salt FLiNaK Using the Machine-Learned Neural Network and Reparametrized Classical Forcefields. J. Phys. Chem. B 2021, 125(37), 10562–10570].

FLiNaK↗
DOE OSTI2026

Chemical and Structural Insights into Solid Electrolyte Interphase Evolution for Sodium Metal Electrodes

The solid electrolyte interphase (SEI) critically governs the reversibility of sodium metal batteries, through dynamically mediating ion transport and interfacial reactions. However, its kinetic evolution under operating conditions, and how it influences interfacial stability, remains poorly understood. Here, in this study, we reveal that the SEI undergoes coupled chemical and mechanical changes during sodium plating and stripping, leading to spatial and temporal heterogeneity that drives interfacial degradation. Synchrotron operando grazing-incidence wide-angle X-ray scattering and soft X-ray absorption spectroscopy capture the sequential formation and dissolution of inorganic SEI phases (NaF, NaH, NaOH, Na 2 PO 3 F), accompanied by depth-dependent alterations in organic SEI components. Mesoscale modeling connects this evolving SEI heterogeneity to localized current density fluctuations and stress accumulation at the Na interface, identifying pathways to electrically isolated sodium formation. These findings show that SEI instability fundamentally limits reversibility in sodium metal batteries, and that controlling SEI chemistry–mechanics coupling is essential to achieving its durability.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Coupling Redox Compensation and Interfacial Stabilization in Low-Ni O3-Type Sodium Layered Oxide Cathodes

Low-Ni O3-type sodium layered oxides are attractive cathodes for cost-robust sodium-ion batteries, yet high-voltage cycling is often limited by Fe-driven degradation, including cation migration/dissolution, irreversible slab gliding with large strain, particle cracking, and accelerated interfacial parasitic reactions. Here, in this study, we introduce a redox-interface codesign strategy using stoichiometric, charge-balanced Cu 2+ /Ti 4+ cosubstitution while preserving full Na stoichiometry, transitioning from NaNi 1/4 Fe 1/2 Mn 1/4 O 2 to NaNi 1/4 Fe 1/5 Mn 1/4 Cu 3/20 Ti 3/20 O 2 . With the cosubstitution, Cu and Ti suppress Fe migration and dissolution and facilitate sustained Fe oxidation at high voltage. Meanwhile, Cu is also shown to be redox-active, providing reversible cationic charge compensation that mitigates the capacity penalty typically associated with reducing Fe participation. Operando diffraction and spectroscopy collectively indicate a more reversible high-voltage structural evolution with suppressed Fe-related irreversibility. Particularly, spontaneous Ti enrichment at surface/grain-boundary regions stabilizes the cathode−electrolyte interface and promotes a more NaF-rich interphase signature. This work establishes a generalizable route to reconcile stability and capacity in low-Ni, Fe-containing O3 sodium layered oxide cathodes via compositionally encoded bulk-interfacial coupling.

25 ENERGY STORAGE↗
DOE OSTI2024

A Carbonyl and Azo-Based Polymer Cathode for Low-Temperature Na-Ion Batteries

Due to flexible structure tunability and abundant structure diversity, redox-active polymers are promising cathode materials for developing affordable and sustainable Na-ion batteries (NIBs). However, polymer cathodes still suffer from low capacity, poor cycle life, and sluggish reaction kinetics. Herein, we designed and synthesized a polymer cathode material bearing carbonyl and azo groups as well as extended conjugation structures in the repeating units. The polymer cathode exhibited exceptional electrochemical performance in NIBs in terms of high capacity, long lifetime, and fast kinetics. When coupled with a low-concentration electrolyte, it shows superior performance at low temperatures down to -50 °C, demonstrating great promise for low-temperature battery applications. Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM) were employed to study the reaction mechanism, interphase structure, and morphological evolution, confirming reversible redox reactions between azo/carbonyl groups in the polymer and Na + /electrons, a NaF-rich interphase, and high structure stability upon cycling. In conclusion, this work provides an effective approach to developing high-performance polymer cathodes for affordable, sustainable, and low-temperature NIBs.

25 ENERGY STORAGE↗
DOE OSTI2025

Versatile Cell Design for Molten Fluoride Salt Spectroscopy: Investigating Metal-Ion Speciation in Molten Fluoride Salts

Fluoride-based molten salts are widely used in industrial applications including aluminum production, thermal energy storage, optical crystal growth, and advanced nuclear reactor designs. Despite the wide range of uses, fundamental understandings of coordination chemistry and methods for probing molten fluorides are scarce, likely due to the difficulty of probing fluoride melts with spectroscopic techniques. Performing spectroscopic measurements of fluoride-based salts is challenging due to the highly corrosive nature of these salts, which can degrade many common optical materials. Here, in this work, we present a versatile optical cell design that enables spectroscopic measurements of corrosive melts. This innovative cell design overcomes the challenges posed by the corrosive nature of the salts, allowing for an accurate and consistent spectroscopic analysis. This work reports temperature-dependent absorption measurements for Co 2+ , Ni 2+ , and Cr 3+ analytes in LiF-NaF-KF eutectic salt (i.e., FLiNaK), which are common corrosion products originating from structural alloys in molten-fluoride handling. Absorption spectra were used to understand interactions of these analytes with FLiNaK, particularly ligand field coordination. The analysis of absorption spectra was complemented by structural analyses using ab initio molecular dynamics (AIMD) simulations, providing deeper insights into the behavior of the analytes in FLiNaK. Our findings indicate that the analytes studied in this work exist in octahedral or near-octahedral coordination states that remain stable across the temperature range of 500–600 °C. This work not only highlights an applied solution to performing optical spectroscopy in corrosive, high-temperature melts but also provides important fundamental insight on coordination behavior of transition-metal species in molten fluorides.

Fluoride salt spectroscopy↗
DOE OSTI2025

Activation of Semicore Electrons in Alkali Metals and Their Role in the B1–B2 Phase Transition under Pressure

Alkali fluorides are often thought of as archetypical ionic compounds whose structures can be understood in terms of the packing of rigid spheres. At ambient pressure, they assume the rocksalt (B1) structure, while under only a few GPa of pressure, the cesium chloride (B2) structure, with higher coordination numbers, is assumed for KF, RbF, and CsF. NaF requires almost 10 times more pressure to undergo this same phase transition, which has not been observed for LiF. Herein, we provide a detailed analysis, based upon quantum chemical calculations, explaining this behavior. We show that for the heavier alkali metals, the semicore p orbitals engage in metal-metal bonding in the B2 phase, facilitating the pressure-induced B1 → B2 structural transition. Furthermore, these findings suggest that the semicore orbitals of heavy alkali metals can be activated without the need of strong oxidants at very mild levels of compression, resulting in the formation of chemical bonds, challenging both traditional and modern core-valence distinctions. In addition, we argue that Cs 5p-5p bonding in CsCl occurs already at ambient pressure, stabilizing the B2 phase, and suggest experiments that may be able to detect signatures of such bonding.

Anions↗
DOE OSTI2026

Tuning Solid Electrolyte Interphase Formation before Plating Onset in Anode-Free Sodium Batteries

Sodium (Na) batteries are of growing interest due to the higher earth abundance of sodium than lithium, as well as their promising theoretical energy density when metallic Na anodes are used. However, Na plating and stripping are heavily influenced by the physicochemical properties of the solid electrolyte interphase (SEI), which is directly influenced by the solvent and salt used for the electrolyte. While most studies focus on the SEI that forms on the surface of Na metal after plating, we expand this analysis by identifying a nanoscale “pre-plating” SEI that forms on the current collector (CC) prior to the onset of Na plating. Here, we systematically investigate an array of Na salt and glyme solvents in the electrolyte and determine the associated impacts on pre-plating SEI formation on aluminum CCs. By combining analytical electrochemistry approaches with a multimodal suite of spectroscopy techniques (X-ray, infrared, and Raman), supported by density functional theory calculations, we reveal a direct correlation between the Na + coordination environment and pre-plating SEI composition. We find that longer-chain glymes produce larger proportions of organic alkoxide products in the interphase, consistent with increased Na + −glyme interactions, while the fraction of salt-derived inorganic products (e.g., NaF) correlates with Na + −anion coordination. These insights highlight the critical influence of electrolyte composition particularly solvent identity and Na + coordination on the initial SEI formation in anode-free Na batteries.

anode-free batteries↗
DOE OSTI2025

Rare earth metals production using alternative feedstock that eliminates HF

This work reports the successful production of rare earth (RE) metal using Na-RE-F. Presently, RE metals are primarily produced using RE-fluoride due to its higher air and moisture stability compared to RE-chloride. However, its preparation requires the use of corrosive and hazardous chemicals, such as hydrofluoric acid (HF) or ammonium bifluoride (NH 4 HF 2 ). The present study demonstrates that Na-RE-F is an alternative salt to the typically used RE-fluoride. The Na-RE-F for this work is produced via a scalable hydrometallurgical approach using three different RE salts as feedstock, including acetate, nitrate, and chloride. HF is neither used nor generated during the salt preparation process. Furthermore, the Na-RE-F powder dries in air (without dry HF), and only water evolves during the drying process. Analyses of the Na-RE-F show that NaF liberates as a flux during the heating process, which lowers the salt reduction temperature to <900 °C, thus minimizing or eliminating the need for additional flux. Calciothermic reduction of the Na-RE-F salt is successfully employed to obtain RE metal. This work represents a safer, greener, and more widely deployable approach for producing the RE metals needed for permanent magnets which support the transition to a cleaner society through the decarbonization of the transportation industry.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Uncovering the re-distribution mechanism of Ni in a de-alloyed Ni-Cr alloy in molten fluorinated salts

A mechanism of Ni redeposition during dealloying corrosion of Ni-Cr is investigated. A model Ni20Cr (wt%) metal alloy was exposed to molten LiF-NaF-KF eutectic (FLiNaK) at 600 °C and at an applied potential of +2.1 VK+/K, above the critical potential for onset of dealloying. Upon extended exposure times (up to 12 h), prominent salt-filled corrosion channels emerge along grain boundaries. A unique grain boundary corrosion mechanism, with respect to the exposed faces of the grains, a central focus of this investigation, is intrinsically connected to the formation of high purity Ni-rich de-alloyed regions within the salt-filled channel. We implement microscale techniques such as energy dispersive spectroscopy (EDS) and electron backscatter diffraction (EBSD) to uncover morphological and compositional variations in relevance to the formation of bicontinuous porosity from corrosion dealloying. To rationalize our findings, a phase-field model is developed and discovers a mechanism in which dissolved Ni from one grain can be redeposited on an adjacent grain at a given difference in interfacial energies. The interaction of chemical and structural factors at the grain boundaries plays a central role in elucidating the dynamics of this phenomenon and its implications towards corrosion.

Mills, Sean H↗
DOE OSTI2025

Modification of Ni-20Cr corrosion dealloying behavior in molten fluorides via cold work induced plastic deformation

The corrosion dealloying behavior of cold-worked (CW) Ni20Cr alloy (wt%) was studied in molten LiF-NaF-KF (or FLiNaK) salts at 600 °C, equal to a homologous temperature (TH) of 0.52. Alloys were cold-rolled to achieve reductions of thickness of 10%, 30%, and 50% introducing plastic deformation and a high density of dislocations. Potentiostatic holds (Eapplied) were applied in two different electrode potential regimes. At 1.75VK+/K$${\text{V}}_{{\text{K}}^{+}/{\text{K}}}$$, Cr dealloying to Cr(II) and Cr(III) is predominant, while at 1.90 VK+/K$${\text{V}}_{{\text{K}}^{+}/{\text{K}}}$$, both Ni and Cr are oxidized in molten FLiNaK at 600 °C. In these potential regimes, dealloyed Ni20Cr displayed bicontinuous porosity within the grain interior and at grain boundaries, driven by the high driving force for Cr dissolution and sustained by defect mediated outward solid state diffusion of Cr in parallel with surface diffusion of Ni. The bicontinuous porous structure developed was observed to undergo further coarsening and densification of the Ni-rich ligaments at a higher electrode potential. The main effect of CW observed is the introduction of plastic deformation and dislocation substructures that serve as short-circuit paths for Cr solid state diffusion to surfaces exposed to FLiNaK. This modified the evolution of the bicontinuous porous structure which increased with CW substantially. Kinetic analysis reveals that the Cr dealloying at +1.75 VK+/K$${\text{V}}_{{\text{K}}^{+}/{\text{K}}}$$ and 1.90 VK+/K$${\text{V}}_{{\text{K}}^{+}/{\text{K}}}$$ is initially charge transfer controlled, except for the 50% CW condition at 1.90 VK+/K$${\text{V}}_{{\text{K}}^{+}/{\text{K}}}$$, where the process becomes limited by slow Cr defect mediated bulk diffusion. The rate determining factors are explored and compared to experimental results.

Chan, Ho Lun↗
DOE OSTI2021

Demystifying the Stern layer at a metal–electrolyte interface: Local dielectric constant, specific ion adsorption, and partial charge transfer

Electric double layer (EDL) represents one of the most basic concepts in electrochemistry and is pertinent to diverse engineering applications ranging from electrocatalysis to energy storage. Whereas phenomenological and coarse-grained models have been long established to describe ionic distributions in the diffuse layer, a faithful prediction of the physicochemical properties of the electrode–electrolyte interface from a molecular perspective remains a daunting challenge. In this work, we investigate the charging behavior of an Ag (111) electrode in NaF aqueous solutions leveraging experimental results and theoretical calculations based on the classical density functional theory for ion distributions in the diffuse layer and on the joint density functional theory (JDFT) for the electronic structure. When the Ag electrode is applied with a negative voltage, the surface charge density can be reasonably described by assuming a neutral Stern layer with the dielectric constant dependent on the local electric field as predicted by the Kirkwood equation. However, the specific adsorption of F− ions must be considered when the electrode is positively charged and the fluoride adsorption can be attributed to both physical and chemical interactions. Qualitatively, F− binding and partial charge transfer are supported by JDFT calculations, which predict an increased binding energy as the voltage increases. Our findings shed insight on the molecular characteristics of the Stern layer and the charge behavior of adsorbed species not specified by conventional EDL models.

Wang, Xuepeng (ORCID:0000000285704546)↗
DOE OSTI2026

Development of MOSCATO: A CFD-Level Electrochemistry and Corrosion Simulator for Molten Salt Systems

For both coolant and fueled variants of molten salt reactors (MSRs), the corrosion of structural materials is a significant challenge. The corrosion stems from chemical and electrochemical reactions initiated by fissile material, fission products, and impurities in the salt. Lower-fidelity models rely on empirical correlations for mass transfer, simplified lumped temperature profiles, and similar assumptions. They do not capture detailed spatial variations in complex geometries, creating the need for high-fidelity modeling to bridge this gap.As we approach the demonstration and possible deployment of MSRs in this decade, the development of a high-fidelity, high-performance simulator becomes imperative. To simulate the complex electrochemical environment and corrosion within molten salt systems, we have developed the Molten Salt Chemistry And TranspOrt (MOSCATO) code. This endeavor is comprised of three essential components. First, mass transfer equations are coupled with the Navier-Stokes equations in order to account for the transport of species in the salt. Second, the diffusion of alloy constituents, such as Cr, Fe, Ni, etc. is simulated within the structural metals. Third, the alloy and salt domains are coupled to account for the heterogeneous chemical and electrochemical reactions that occur at the salt-alloy interface.MOSCATO manages all three components within the framework of the highly scalable, open-source spectral element method computational fluid dynamics code Nek5000/NekRS. This integration enables MOSCATO to harness the immense computational power of modern high-performance computing resources, ensuring both high fidelity and computational speed.In addition to code development, we have initiated a comprehensive verification and validation campaign, utilizing data from diverse sources. First, MOSCATO's electrochemical solver was verified with reference numerical data. Then validation occurred against experiments: one of a thermal galvanic cell and the other for corrosion in flowing molten salt of FLiNaK (LiF-NaF-KF). This campaign verified and validated MOSCATO as a reliable tool for simulating electrochemical environments and corrosion in molten salt systems.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2022

Na Diffusion and Device Performance of AgBr Treated CuGaSe 2 Thin Films

Previous work demonstrated that uniform CuGaSe2 (CGS) thin films with large grains could be grown using a short AgBr vapor treatment during growth. Here, devices made with this treated CGS showed better performance compared to devices made with standard material. Here, it is shown that AgBr treated CGS device performance worsens over time and is attributed to the suppression of Na diffusion. A NaF post-deposition treatment is shown to effectively introduce Na into the AgBr treated CGS film and prevent device degradation.

14 SOLAR ENERGY↗
DOE OSTI2024

Morphological Evolution and Dealloying During Corrosion of Ni20Cr (wt.%) in Molten FLiNaK Salts

The dealloying corrosion behavior of the FCC Ni20Cr (wt%) in molten LiF-NaF-KF (FLiNaK) salts at 600 °C under varying applied potentials was investigated. Using in-operando electrochemical techniques and a multi-modal suite of characterization methods, we connect electrochemical potential, thermodynamic stability, and electro-dissolution kinetics to the corrosion morphologies. Notably, under certain potential regimes, a micron-scale bicontinuous structure, characterized by a network of interconnected pores and ligaments riched with the composition of the more noble (MN) element, becomes prominent. At other potentials both MN and less noble (LN) elements dealloy but at different rates. The dealloying process consists of lattice and grain boundary diffusion of Cr to the metal/salt interface, interphase Cr oxidation, accompanied by surface diffusion of Ni to form interconnected ligaments. At higher potentials, the bicontinuous porous structure undergoes further surface coarsening. Concurrently, Cr(II), Cr(III), and Ni(II) begin to dissolve, with the dissolution of Ni occurring at a significantly slower rate. When solid-state transport of Cr is exceeded by the interfacial rates, dealloying depths are limited.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗