Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Mineralogy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Elemental Partitioning Constraints on the Mineralogy of the Martian Mantle

Incompatible elements weakly partition into mantle mineral phases so precise measurements of incompatible element abundances in mantle melts have been used to infer mineralogy of mantle sources [1, 2]. In a recent study [3], we showed that several incompatible chalcophile elements (As, Tl, Pb) relative to REE were more compatible in martian igneous rocks than in terrestrial basalts. This observation can be accounted for by (1) the bulk partition coefficients of chalcophile elements being higher due to the presence of more residual sulfide in the martian mantle [3] and/or (2) different relative compatibilities in the martian mantle due to differences in mineralogy. In this study, the compatibility sequences of lithophile elements in martian and MORB mantles are revised to better represent relative partitioning behavior during mantle differentiation and the influence of mantle mineralogy is examined.

mantle geochemistry↗
NASA NTRSDate not supplied

Eruption Characterisitics of Lunar Localized Pyroclastic Deposits Based on Water Content, Mineralogy, Regolith Properties

Lunar pyroclastic deposits are low albedo deposits present throughout the lunar surface including both maria and highlands, nearside and farside, and high latitudes and equatorial regions [e.g., 1]. There are two main types of pyroclastic deposits based upon size: localized (<2500 km2) and regional pyroclastic deposits (>2500 km2) [1]. In this study, we focus on the smaller localized pyroclastic deposits. The first and most detailed study of localized pyroclastic deposits are the deposits in Alphonsus crater [2]. This study included examining the radar and volumetric properties of these deposits. They found that vulcanian-like eruptions are most consistent with their observations. They imagined that a dike intrudes into the crust and creates a cooled basaltic cap. With increasing pressure under the basaltic cap, the pressure eventually overwhelms the surrounding rocks and results in explosive decompression. Later studies examined several pyroclastic deposits across the lunar surface using radar [2–4], digital terrain models (DTMs) [2,4], visible and near-infrared spectrometers [1,4–7], and a radiometer [4] to determine the mineralogy (e.g., olivine, glass, clinopyroxene, orthopyroxene, and plagioclase), deposit thickness and volume, proportion of juvenile material, radar backscatter, surface rock abundance, and regolith density. These various properties were examined against one another to better group localized pyroclastic deposits and understand how they relate to one another [4]. One of the studies divided pyroclastic deposits into three groups based upon the shape of the 1-μm absorption feature. The three Groups could be interpretated as having highlands and pyroclastic material (Group I), mare and pyroclastic material (Group II), and glass and orthopyroxene material (Group III) [5]. Building on that foundation, another study divided the pyroclastic deposits into four groups based upon their surface rock abundance and glass abundance [4], where deposits are classified based upon low surface rock abundance and high glass abundance (Glassy deposits); high rock abundance, high glass abundance (Blocky deposits); moderate rock abundance and low glass abundance (Crystalline deposits); and high rock abundance and low glass abundance (Indistinct Group). In addition to these studies, we can now look at their water contents using the new Effective Single Particle Absorption Thickness (ESPAT) parameter map [8]. The ESPAT map measures the strength of the 3-μm absorption feature in single scattering albedo space. The strength of this feature and its relationship to water content has been calibrated to returned samples, which allows for water content to be derived from remote spectral data (i.e., Moon Mineralogy Mapper). The goal of this study is to examine how water content in the pyroclastic deposits varies with respect to the geometric, mineralogic, and physical properties of the localized pyroclastic deposits as measured by a previous study [i.e., 4]. A more complete version of this work is found in [9].

D Trang↗
NASA NTRS2022

GRO 95577 (CR1) as a mineralogical analogue for asteroid (101955) Bennu

Orbital spectra of asteroid (101955) Bennu collected by NASA's Origins, Spectral Interpretation, Resource Identification, Security–Regolith Explorer (OSIRIS–REx) spacecraft have identified ungrouped C, CI, and CM meteorites having petrologic types 1, 1/2, and 2 as the best mineralogical analogues to Bennu to date. Here we present spectral evidence that Grosvenor Mountains (GRO) 95577, a CR1, is a better analogue for Bennu's bulk surface mineralogy. CR-like parent bodies are targets of interest because they contain some of the most pristine materials from the solar nebula and can contain substantial amounts of H2O and OH− in addition to exotic organics. Unfortunately, terrestrial weathering makes constraining their indigenous mineralogy and organics challenging. Analysis of samples retrieved directly from an asteroid would help us disentangle the effects of terrestrial weathering and asteroidal aqueous alteration and hence whether some of the exotic organics and large populations of presolar grains were affected by terrestrial processes in meteorites. If Bennu is comprised of CR1(−like) material, in whole or in part, the OSIRIS–REx returned sample represents a tremendous opportunity to explore in depth what is currently a unique material among carbonaceous chondrites.

Asteroids↗
NASA NTRSDate not supplied

Mineralogical Evidence for Environmental Change in the Clay-Sulfate Transition at Gale Crater, Mars

A primary reason for selecting Gale crater as the Mars Science Laboratory (MSL) Curiosity rover landing site was a clear mineralogical transition from Fe/Mg smectite in older strata to hydrated Mg sulfate salts in younger strata observed in orbital visible/shortwave-infrared reflectance data. This transition has been observed in other early-Hesperian terrains on Mars and has been hypothesized to signal a planet-wide change in climate from relatively warm and wet to cold and dry. Curiosity studied the sedimentology and geochemical and mineralogical composition of rocks in this “clay-sulfate transition” region from sols 3052 to 3572 (i.e., March 2021 to August 2022), with arrival at the sulfate unit on sol 3574. Here, we report on the mineralogical measurements made by the CheMin X-ray diffractometer of the six drill targets in the clay-sulfate transition and the first drill target in the sulfate unit. We use compositional data and sedimentological observations to interpret depositional and diagenetic environments and present hypotheses to explain the transition from clay minerals to hydrated Mg sulfates.

E. B. Rampe↗
NASA NTRS2019

Bayesian Estimation of Earth’s Undiscovered Mineralogical Diversity Using Noninformative Priors

Recently, statistical distributions have been explored to provide estimates of the mineralogical diversity of Earth, and Earth-like planets. In this paper, a Bayesian approach is introduced to estimate Earth’s undiscovered mineralogical diversity. Samples are generated from a posterior distribution of the model parameters using Markov chain Monte Carlo simulations such that estimates and inference are directly obtained. It was previously shown that the mineral species frequency distribution conforms to a generalized inverse Gauss–Poisson (GIGP) large number of rare events model. Even though the model fit was good, the population size estimate obtained by using this model was found to be unreasonably low by mineralogists. In this paper, several zero-truncated, mixed Poisson distributions are fitted and compared, where the Poisson-lognormal distribution is found to provide the best fit. Subsequently, the population size estimates obtained by Bayesian methods are compared to the empirical Bayes estimates. Species accumulation curves are constructed and employed to estimate the population size as a function of sampling size. Finally, the relative abundances, and hence the occurrence probabilities of species in a random sample, are calculated numerically for all mineral species in Earth’s crust using the Poisson-lognormal distribution. These calculations are connected and compared to the calculations obtained in a previous paper using the GIGP model for which mineralogical criteria of an Earth-like planet were given.

Bayesian statistics↗
DOE OSTI2020

A Mineralogy–Based Anthropogenic Combustion–Iron Emission Inventory

Atmospheric supply of iron can modulate ocean biogeochemistry, due to its key role in global nitrogen and carbon cycles. Current estimates predict up to 20% of global ocean net primary productivity depends on an atmospheric iron source. Using a technology–based methodology, we revise total and soluble anthropogenic iron emissions and resolve iron into its mineral components, which allows modeling mineral–specific atmospheric reactions. We compare different methodologies for representing anthropogenic iron solubility: measured in mild and strong leaches and estimated using a mineralogy basis and identify the emissions that are most affected by such assumptions. The inclusion of metal smelting as an iron source increases iron emissions by up to 10 times higher in the fine aerosol fraction (smaller than 1 μm) than most previous inventories. Different solubility assumptions alter anthropogenic soluble iron emissions and deposition by a factor of 20 and 10, respectively. Using solubilities measured in mild leaches and calculated by mineralogy give 20–30 Gg/yr anthropogenic emissions and 40–50 Gg/yr deposition, while those measured in strong leaches give 80–440 Gg/yr emissions and 200–450 Gg/yr deposition. Here, this range of anthropogenic soluble iron deposition leads to global soluble iron deposition of 1,900–2,300 Gg/yr when dust, wildfires, and atmospheric processing are included, indicating such assumptions can affect global soluble iron supply by about 30%. In regions where marine primary productivity is iron limited, anthropogenic combustion–iron contributes up to half of the atmospheric soluble iron flux to the North Pacific Ocean but supplies less than 5% to the Southern Ocean.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Mineralogy of the deep lower mantle in the presence of H 2 O

Understanding the mineralogy of the Earth's interior is a prerequisite for unravelling the evolution and dynamics of our planet. Here, we conducted high pressure-temperature experiments mimicking the conditions of the deep lower mantle (DLM, 1800–2890 km in depth) and observed surprising mineralogical transformations in the presence of water. Ferropericlase, (Mg, Fe)O, which is the most abundant oxide mineral in Earth, reacts with H 2 O to form a previously unknown (Mg, Fe)O 2 H x (x ≤ 1) phase. The (Mg, Fe)O 2 H x has a pyrite structure and it coexists with the dominant silicate phases, bridgmanite and post-perovskite. Depending on Mg content and geotherm temperatures, the transformation may occur at 1800 km for (Mg 0.6 Fe 0.4 )O or beyond 2300 km for (Mg 0.7 Fe 0.3 )O. The (Mg, Fe)O 2 H x is an oxygen excess phase that stores an excessive amount of oxygen beyond the charge balance of maximum cation valences (Mg 2+ , Fe 3+ and H + ). This important phase has a number of far-reaching implications including extreme redox inhomogeneity, deep-oxygen reservoirs in the DLM and an internal source for modulating oxygen in the atmosphere.

58 GEOSCIENCES↗
NASA NTRSDate not supplied

The Chemistry and Mineralogy of Mars Soils: A Tour of Landed Mission Results from the Last 45 years

Eight landed missions demonstrated that martian soils (defined as loose, unconsolidated surface material) consist of basaltic mineralogy, iron (hydr)oxides, amorphous material, sulfate, chloride, (per)chlorate, nitrate, carbonate, and possible organic C. The Viking Lander 1 and 2 (1976), Mars Pathfinder (1997), and Mars Exploration Rover (MER-A,B) (2004) missions determined that martian soil was similar at all landing sites by having mafic chemistry, high S (~ 7 wt.% SO3) and Cl (0.7 wt.%), and spectral detections of poorly crystalline and crystalline Fe-(hydr)oxide phases. The MER Mössbauer spectrometers detected Fe-bearing olivine and pyroxene along with magnetite, nano-phase Fe-oxides (npOx), hematite, and ferric sulfate. The 2008 Phoenix Lander instrumentation measured a soil pH of 7.7 and detected ~0.6 wt.% perchlorate, 3-5 wt.% Ca-rich carbonate and carbon (500 gC/g) consistent with oxidized organics and Fe-rich carbonate. The 2012 Mars Science Laboratory (MSL) rover (Gale Crater) through X-ray diffraction detected plagioclase feldspar, pyroxene, magnetite, hematite, anhydrite, and quartz, with the balance being composed of Si/Fe-containing amorphous (30 to 40 wt.%) material. MSL evolved gas analysis detected (per)chlorate (0.4 wt.% ClO4), nitrate (0.23 wt.%), along with minor Fe/Mg sulfate and oxidized organic C (~2000 gC/g). Limited pedogenesis may have occurred at the 2018 InSight landing site and in one Gusev Crater soil (MER-B) which have 3 to 10 cm-thick duricrust horizons consistent with atmospheric water vapor interactions with soil salts. Martian soil primary mineralogy was derived mostly from local rock (volcanic, sedimentary) that is largely basaltic planet wide. Secondary minerals [e.g., sulfate, chloride, perchlorate, nitrate, carbonate, Fe-(hydr)oxides] in martian soils formed from oxidative aqueous alteration processes and were likely derived from a combination of local sedimentary rock sources and the global bright dust. The Mars 2020 mission will collect soil for Earth return to enable a thorough assessment of the nature and origin of martian soil.

Mars↗
NASA NTRSDate not supplied

Coupling of Dust Mineralogy to Radiation in NASA GISS ModelE: Impact Upon Dust Optical Properties and Direct Radiative Effect

Estimates of dust direct radiative effect (DRE) are still largely uncertain mainly due to the poor constraining of regional variations of dust absorption, whose known connection with mineral composition is still largely neglected by most Earth System Models. The inaccurate knowledge of soil mineralogy and insufficient measurements of dust physical and optical properties still present the main challenges for a proper representation of the dust-radiation interaction in climate models. We recently upgraded the coupling of dust minerals to shortwave radiation in the NASA GISS ModelE. In particular, we extended the interaction to online-calculated minerals and implemented two different mixing configurations: i) external mixing of three main mineral components and ii) internal mixing of all minerals, allowing a dynamic fraction of iron oxides. We used a semi-empirical approach for the optical calculations, mostly based on aerosol chamber measurements from natural soils, aiming to reduce the influence of uncertain assumptions on the optical properties and mixing state of individual minerals. In this contribution, we present the results of our first calculations of dust optical properties and DREs based on different mixing configurations of interactive minerals. We show the changes to dust optical depth and single scattering albedo, with respect to the control case using homogeneous dust composition, and the consequent global and regional variations in dust DREs at the top of atmosphere and at surface. We also compare the model optical properties with AERONET data, filtered to identify dust scenes. We find that accounting for the diverse properties of dust minerals modifies the pattern of regional dust absorption and therefore its impact upon climate. We also show that the mineralogy effect is sensitive to the assumed mixing state of minerals.

dust direct radiative effect↗
DOE OSTI2023

Machine learning and deep learning for mineralogy interpretation and CO 2 saturation estimation in geological carbon Storage: A case study in the Illinois Basin

Carbon capture and storage (CCS) is a promising approach to simultaneously maintaining energy security and reducing carbon dioxide (CO 2 ) emissions under the current energy portfolio that is dominated by fossil fuel energy. Pre-injection formation characterization and post-injection CO 2 monitoring are two critical tasks to guarantee storage efficiency in CCS. The CCS projects in the Illinois Basin, the first large-scale CO 2 injection into saline aquifers in the United States, employed conventional and the latest pulsed neutron logging (PNL) tools for mineralogy interpretation and CO 2 saturation estimation, which provide valuable references for future CCS projects. Because of the inherent fuzziness of petrophysical measurements and complex subsurface heterogeneity, interpreting well-logging data is time-consuming, and its accuracy can be user-biased. In recent years, data-driven methods have been widely used to capture the non-linear patterns between input features and interpretation results. This work applied and evaluated four commonly used machine learning (ML) models, including ridge regression (RR), random forest (RF), gradient boosting regression (GBR), support vector regression (SVR), and one deep learning (DL) model, the artificial neural network (ANN). We optimized the hyperparameters of the four ML models and the DL model using the simulated annealing algorithm and the grid search strategy, respectively. The input features of the mineralogy interpretation models were eleven conventional well-logging parameters, and the label data (i.e., ground truth) were the porosity and volumetric fractions of six minerals, including quartz, feldspar, dolomite, calcite, clay, and iron minerals. The results demonstrated that the GBR and RF models were superior in predicting volumetric fractions of minerals and porosity; label data with low coefficient of variation (CV) values tended to yield better performance. For CO 2 saturation estimation, the RF was the best-performing model, followed by SVR, ANN, GBR, and RR. Furthermore, we conducted feature importance ranking using the permutation importance algorithm and found that the formation sigma and well pressure were the most important features in this study. In conclusion, the study of CCS projects in the Illinois Basin bridges the gap between the limited knowledge and understanding of geological carbon storage and the increasing demand for reliable, cost-effective, and sustainable energy solutions.

58 GEOSCIENCES↗
DOE OSTI2021

Mineralogy-dependent sulfide oxidation via polysulfide and thiosulfate pathways during weathering of mixed-sulfide bearing mine waste rock

Tracking the S oxidation pathway in sulfide-bearing mine waste-rock piles is complicated by variations in water content, O 2 and Fe 3+ concentrations, microbial diversity, mineralogy, the occurrence of a variety of S species associated with incomplete oxidation, and nonlinear coupling between physicochemical processes. Synchrotron-based S K-edge X-ray absorption near edge structure (XANES) spectroscopy facilitates the identification and quantification of S species (i.e., S 2– , $S_{2}O_{2}^{2–}$, S 8 , $S_{2}O_{3}^{2–}$, and $S_{2}O_{4}^{2–}$) in a weathered mine waste-rock pile containing pyrite, sphalerite, galena, pyrrhotite, and chalcopyrite. Mineralogy-dependent polysulfide and thiosulfate pathways both affect the S oxidation within the waste-rock pile. Currently, the polysulfide pathway, with S 8 as the intermediate S species, generates high concentrations of dissolved metals (from the rapid oxidation of monosulfides including sphalerite, galena, pyrrhotite, and chalcopyrite). As these monosulfides are depleted, the thiosulfate pathway of pyrite oxidation, including intermediate oxidation products (i.e., S 8 and $S_{2}O_{3}^{2–}$), will become the dominant oxidation pathway, resulting in the potential for generation of additional acidic drainage. This information highlights the importance of identifying the sulfide-mineral oxidation reaction pathways when attempting to estimate acid generation potential, and when developing remediation strategies for the storage and management of sulfide-bearing waste rock.

58 GEOSCIENCES↗
DOE OSTI2022

Mineralogical, magnetic and geochemical data constrain the pathways and extent of weathering of mineralized sedimentary rocks

The oxidative weathering of sulfidic rock can profoundly impact watersheds through the resulting export of acidity and metals. Weathering leaves a record of mineral transformation, particularly involving minor redox-sensitive phases, that can inform the development of conceptual and quantitative models. In sulfidic sedimentary rocks, however, variations in depositional history, diagenesis and mineralization can change or overprint the distributions of these trace minerals, complicating the interpretation of weathering signatures. Here we show that a combination of bulk mineralogical and geochemical techniques, micrometer-resolution X-ray fluorescence microprobe analysis and rock magnetic measurements, applied to drill core samples and single weathered fractures, can provide data that enable the development of a geochemically consistent weathering model. This work focused on one watershed in the Upper Colorado River Basin sitting within the Mesaverde Formation, a sedimentary sandstone bedrock with disseminated sulfide minerals, including pyrite and sphalerite, that were introduced during diagenesis and subsequent magmatic-hydrothermal mineralization. Combined analytical methods revealed the pathways of iron (Fe), carbonate and silicate mineral weathering and showed how pH controls element retention or release from the actively weathering fractured sandstone. Drill core logging, whole rock X-ray diffraction, and geochemical measurements document the progression from unweathered rock at depth to weathered rock at the surface. X-ray microprobe analyses of a 1-cm size weathering profile along a fracture surface are consistent with the mobilization of Fe(II) and Fe(III) into acidic pore water from the dissolution of primary pyrite, Fe-sphalerite, chlorite, and minor siderite and pyrrhotite. These reactions are followed by the precipitation of secondary minerals such as of goethite and jarosite, a Fe-(oxyhydr)oxide and hydrous Fe(III) sulfate, respectively. Microscale analyses also helped explain the weathering reactions responsible for the mineralogical transformations observed in the top and most weathered section of the drill core. For example, dissolution of feldspar and chlorite neutralizes the acidity generated by Fe and sulfide mineral oxidation, oversaturating the solution in both Fe-oxides. The combination of X-ray spectromicroscopy and magnetic measurements show that the Fe(III) product is goethite, mainly present either as a coating on fracture surfaces in the actively weathering region of the core or more homogeneously contained within the unconsolidated regolith at the top of the core. Low-temperature magnetic data reveal the presence of ferromagnetic Fe-sulfide pyrrhotite that, although it occurs at trace concentrations, could provide a qualitative proxy for unweathered sulfide minerals because the loss of pyrrhotite is associated with the onset of oxidative weathering. Pyrrhotite loss and goethite formation are detectable through room-temperature magnetic coercivity changes, suggesting that rock magnetic measurements can determine weathering intensity in rock samples at many scales. In conclusion, this work contributes evidence that the weathering of sulfidic sedimentary rocks follows a geochemical pattern in which the abundance of sulfide minerals controls the generation of acidity and dissolved elements, and the pH-dependent mobility of these elements controls their export to the ground- and surface-water.

58 GEOSCIENCES↗
DOE OSTI2022

Insights into Controls of Mineralogy and Pore Structure on the Density of Methane Adsorption Phase in Shales under Supercritical Conditions

With gradually increasing enhancing population and industrialization, exploitation of shale gas is enhancing in the world to satisfy the growing demand for energy worldwide. To exploit shale gas efficiently, accurate assessment of shale gas in place (GIP) is necessary for determining production strategies. Unlike free and dissolved gas, adsorbed gas contributes to the shale GIP up to 85% due to the well-developed surface area and micropores. Measured excess adsorption of methane (up to over 95% of subsurface shale gas) is often corrected to absolute adsorption to obtain the actual amount of adsorption under supercritical (or geological) conditions. During the correction, adsorption phase density (APD) is critical. However, the APD of subsurface shale gas and the effects of shale properties (e.g., mineralogy and pore structure) on APD remain poorly understood. A series of high-pressure methane adsorption isotherms (HPMAI) on Caney Shales were collected and analyzed in conjunction with other United States and Chinese shales from the literature at 35–125 °C and up to 15 MPa. Here, a three-layer Ono–Kondo (OK3) model is utilized to derive the temperature- and pressure-dependent APD coupling low-pressure nitrogen adsorption isotherms (LPNAI) and HPMAI. X-ray diffraction and organic geochemistry are combined to reveal the mineralogy. Brunauer–Emmett–Teller, Barrett–Joyner–Halenda, and Horvath–Kawazoe analyses via LPNAI are used to investigate the pore structures. Results show that APD increases with organic matter (OM) proxied by total organic carbon and decreases with clay minerals and the sum of quartz and feldspar. OM dramatically contributes to the APD as multiple-layer adsorption exists, and the APD for OM could be 1.4–8.5 times that for clay minerals. Other inorganic minerals contribute less to APD. The properties and constitution of the surface area instead of the volume fraction contribute to the APD in shales. APD does not show an obvious correlation with micropore volume, likely related to the ratio of micropore volume to the total pore volume. Here, we provide a significant and comprehensive study of petrological factors that impact the APD of subsurface shale gas, which will improve the estimation of supercritical adsorption and shale GIP under reservoir conditions. Also, the findings in this work can provide applications for subsurface carbon dioxide adsorption and storage.

58 GEOSCIENCES↗
DOE OSTI2023

Small-Angle Neutron Scattering Investigation of Oil Recovery in Mineralogically Distinct Wolfcamp Shale Strata

Understanding and improving hydrocarbon yields during enhanced oil recovery (EOR) in unconventional reservoirs is complicated by the intrinsic mineralogical and geochemical heterogeneity of shale formations. Here, in this study, we utilized small-angle neutron scattering (SANS) and ultra-small-angle neutron scattering (USANS) to investigate the degree of oil retention and its location in the nanoporous shale matrix for two mineralogically distinct shale samples. The two samples, dubbed “dark” and “light” based on their color, were taken from adjacent strata in a Wolfcamp shale core. While both samples contained kerogen, the dark sample contained more kerogen and clay (43.7 wt %) while the light sample contained more calcite (54.9 wt %). Samples were presaturated with decane, a model hydrocarbon, prior to pressure cycling with methane. Results showed significantly more retention of decane in 1.5–10 nm radius pores of both, likely indicating that oil is retained within kerogen nanopores. Although the dark sample had a higher porosity of 8.7%, versus 3.3% for the light sample, more pores were accessible to decane and a higher percentage of the imbibed decane was removable from the light sample compared to the dark sample. The majority of decane was not recoverable for the dark sample, indicating that EOR with methane can be challenging. These new findings can help to model expected recoveries of in-place oil from heterogeneous shale formations, as well as inform improved EOR strategies.

04 OIL SHALES AND TAR SANDS↗
DOE OSTI2021

Role of Mineralogy in Controlling Fracture Formation

The presence of fractures in caprocks can pose increased risks in subsurface energy systems and processes like CO 2 sequestration by introducing high-permeability leakage paths. Fracture apertures and permeability can be altered through mineral dissolution and precipitation reactions, but the reactive evolution of fractures is not well understood. In fractures, minerals that are otherwise inaccessible to reactive fluids can become exposed, resulting in mineral reactions unpredicted by bulk formation data. This work seeks to understand the relationship between mineralogy and fracture formation to enhance our understanding of reactive fracture evolution and CO 2 leakage potential. Here, the mineral compositions of mechanically induced fracture surfaces in samples of the Mancos and Marcellus shales have been quantified and compared to those of the near-fracture matrices using imaging and bulk X-ray diffraction (XRD) data. In the Mancos shale, the concentrations of clay minerals are enhanced along fracture surfaces with respect to the bulk, and the fracture is most likely to form at kaolinite–kaolinite interfaces. Further, evaluation of the mineralogical spatial variability through cross-correlation analysis of the surrounding matrix in images of samples cut perpendicular to the fracture shows that clay is 16.7 times more likely to be present than carbonate minerals near the fracture surface. The high correlation persists roughly 200 μm into the surrounding matrix for the Mancos sample and implies that the fracture formed within a defined clay-rich lithofacies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Thermal Pressure in the Laser‐Heated Diamond Anvil Cell: A Quantitative Study and Implications for the Density Versus Mineralogy Correlation of the Mantle

Abstract Thermal pressure is an inevitable thermodynamic consequence of heating a volumetrically constrained sample in the diamond anvil cell. Its possible influences on experimentally determined density‐mineralogy correlations are widely appreciated, yet the effect itself has never been experimentally measured. We present here the first quantitative measurements of the spatial distribution of thermal pressure in a laser‐heated diamond anvil cell (LHDAC) in both olivine and AgI. The observed thermal pressure is strongly localized and closely follows the distribution of the laser hotspot. The magnitude of the thermal pressure is of the order of the thermodynamic thermal pressure ( αK T Δ T ) with gradients between 0.5 and 1.0 GPa/10 μm. Remarkably, we measure a steep gradient in thermal pressure even in a sample that is heated close to its melting line. This generates consequences for pressure determinations in pressure‐volume‐temperature (PVT) equation of state measurements when using an LHDAC. We show that an incomplete account of thermal pressure in PVT experiments can lead to biases in the coveted depth versus mineralogy correlation. However, the ability to spatially resolve thermal pressure in an LHDAC opens avenues to measure difficult‐to‐constrain thermodynamic derivative properties, which are important for comprehensive thermodynamic descriptions of the interior of planets.

Yen, Connor Ethan↗
DOE OSTI2025

Mineralogical evidence for hydrothermal alteration of Bennu samples

Samples of asteroid (101955) Bennu delivered by the OSIRIS-REx mission offer the opportunity to study pristine planetary materials unchanged by exposure to the terrestrial environment. Here we use a combination of X-ray diffraction and various electron microscopy techniques to explore the detailed mineralogy of Bennu samples and determine the alteration history of the planetesimal protolith from which they originated. The samples consist largely of hydrated sheet-silicate minerals, namely nanoscale serpentine and saponite of varied grain size, which are decorated with micro- to nanoscale Fe-sulfides, magnetite and carbonates. We observe sheet silicates parallel and normal to sulfide surfaces and as inclusions in sulfides; sulfur-rich veins transecting the sheet-silicate matrix; zoned carbonates and phosphates and sulfide and magnetite grains exhibiting embayment. The mineralogical evidence indicates alteration of accreted minerals by a fluid that evolved with time, leading to etching, dissolution and reprecipitation. Sulfide compositions indicate alteration at ~25 °C, similar to conditions inferred for asteroid (162173) Ryugu and Ivuna-type (CI) chondrite meteorites. The fluid probably evolved from neutral to alkaline, culminating with the precipitation of highly soluble salts. We conclude that Bennu’s protolith comprised mainly nanometre to micrometre silicates, with fewer chondrules and calcium–aluminium-rich inclusions than those of most chondrite groups.

Zega, T J↗
DOE OSTI2022

Mineralogy, fabric and deformation domains in D" across the southwestern border of the African LLSVP

Recent advances in seismic anisotropy studies that jointly use reflections and shear wave splitting have proven to place tight constraints on the plausible anisotropic and deformation scenarios in the D" region. We apply this novel methodology to a large area of the D" region beneath the South Atlantic, in proximity to and within the African large low seismic velocity province (LLSVP). This area of the mantle is characterized by a transition from fast to slow seismic velocity anomalies and it is thought to be the location of deep-seated plumes responsible for hotspot volcanism. Attempting to probe mantle composition and deformation along the LLSVP borders may provide key information on mantle dynamics. By analysing seismic phases sampling this region, we detect a D" discontinuity over a large area beneath the South Atlantic, with inferred depth ranges ~170 to ~240 km above the core–mantle boundary. We find evidence for a D" reflector within the area of the LLSVP. Shear wave splitting observations suggest that anisotropy is present in this region of the mantle, in agreement with previous studies that partially sampled this region. We model the observations considering lattice- and shape-preferred orientation of materials expected in the D" region. A regional variation of mineralogy, phase transition boundaries, and deformation direction is required to explain the data. We infer two distinct domains of mineralogy and deformation: aligned post-perovskite outside the LLSVP and aligned bridgmanite within the LLSVP. Finally, the scenario depicted by this study agrees well with the current hypotheses for the composition of the LLSVP and with the prevalence of vertical deformation directions expected to occur along the LLSVPs borders.

58 GEOSCIENCES↗