SEARCH · Engineering Papers

Results for “Meteoroids”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

All sources NASA NTRS DOE OSTI

NASA NTRS2007

Comparison of Meteoroid Flux Models for Near Earth Space

Over the last decade several new models for the sporadic interplanetary meteoroid flux have been developed. These include the Meteoroid Engineering Model (MEM), the Divine-Staubach model and the Interplanetary Meteoroid Engineering Model (IMEM). They typically cover mass ranges from 10-12 g (or lower) to 1 g and are applicable for model specific sun distance ranges between 0.2 A.U. and 10 A.U. Near 1 A.U. averaged fluxes (over direction and velocities) for all these models are tuned to the well established interplanetary model by Gr?n et. al. However, in many respects these models differ considerably. Examples are the velocity and directional distributions and the assumed meteoroid sources. In this paper flux predictions by the various models to Earth orbiting spacecraft are compared. Main differences are presented and analysed. The persisting differences even for near Earth space can be seen as surprising in view of the numerous ground based (optical, radar) and in-situ (captured IDPs, in-situ detectors and analysis of retrieved hardware) measurements and simulations. Remaining uncertainties and potential additional studies to overcome the existing model discrepancies are discussed.

Drolshagen, G.↗

NASA NTRS2004

Photon momentum transfer plane for asteroid, meteoroid, and comet orbit shaping

A spacecraft docks with a spinning and/or rotating asteroid, meteoroid, comet, or other space object, utilizing a tether shaped in a loop and utilizing subvehicles appropriately to control loop instabilities. The loop is positioned about a portion of the asteroid and retracted thereby docking the spacecraft to the asteroid, meteoroid, comet, or other space object. A deployable rigidized, photon momentum transfer plane of sufficient thickness may then be inflated and filled with foam. This plane has a reflective surface that assists in generating a larger momentum from impinging photons. This plane may also be moved relative to the spacecraft to alter the forces acting on it, and thus on the asteroid, meteoroid, comet, or other space object to which it is attached. In general, these forces may be utilized, over time, to alter the orbits of asteroids, meteoroids, comets, or other space objects. Sensors and communication equipment may be utilized to allow remote operation of the rigidized, photon momentum transfer plane and tether.

Campbell, Jonathan W.↗

NASA NTRS2011

French Meteor Network for High Precision Orbits of Meteoroids

There is a lack of precise meteoroids orbit from video observations as most of the meteor stations use off-the-shelf CCD cameras. Few meteoroids orbit with precise semi-major axis are available using film photographic method. Precise orbits are necessary to compute the dust flux in the Earth s vicinity, and to estimate the ejection time of the meteoroids accurately by comparing them with the theoretical evolution model. We investigate the use of large CCD sensors to observe multi-station meteors and to compute precise orbit of these meteoroids. An ideal spatial and temporal resolution to get an accuracy to those similar of photographic plates are discussed. Various problems faced due to the use of large CCD, such as increasing the spatial and the temporal resolution at the same time and computational problems in finding the meteor position are illustrated.

Atreya, P.↗

NASA NTRS2011

Meteoroid Fragmentation as Revealed in Head- and Trail-Echoes Observed with the Arecibo UHF and VHF Radars

We report recent 46.8/430 MHz (VHF/UHF) radar meteor observations at Arecibo Observatory (AO) that reveal many previously unreported features in the radar meteor return - including flare-trails at both UHF and VHF - that are consistent with meteoroid fragmentation. Signature features of fragmentation include strong intra-pulse and pulse-to-pulse fading as the result of interference between or among multiple meteor head-echo returns and between head-echo and impulsive flare or "point" trail-echoes. That strong interference fading occurs implies that these scatterers exhibit well defined phase centers and are thus small compared with the wavelength. These results are consistent with and offer advances beyond a long history of optical and radar meteoroid fragmentation studies. Further, at AO, fragmenting and flare events are found to be a large fraction of the total events even though these meteoroids are likely the smallest observed by the major radars. Fragmentation is found to be a major though not dominate component of the meteors observed at other HPLA radars that are sensitive to larger meteoroids.

Mathews, J. D.↗

NASA NTRS2012

Modeling the Meteoroid Input Function at Mid-Latitude Using Meteor Observations by the MU Radar

The Meteoroid Input Function (MIF) model has been developed with the purpose of understanding the temporal and spatial variability of the meteoroid impact in the atmosphere. This model includes the assessment of potential observational biases, namely through the use of empirical measurements to characterize the minimum detectable radar cross-section (RCS) for the particular High Power Large Aperture (HPLA) radar utilized. This RCS sensitivity threshold allows for the characterization of the radar system s ability to detect particles at a given mass and velocity. The MIF has been shown to accurately predict the meteor detection rate of several HPLA radar systems, including the Arecibo Observatory (AO) and the Poker Flat Incoherent Scatter Radar (PFISR), as well as the seasonal and diurnal variations of the meteor flux at various geographic locations. In this paper, the MIF model is used to predict several properties of the meteors observed by the Middle and Upper atmosphere (MU) radar, including the distributions of meteor areal density, speed, and radiant location. This study offers new insight into the accuracy of the MIF, as it addresses the ability of the model to predict meteor observations at middle geographic latitudes and for a radar operating frequency in the low VHF band. Furthermore, the interferometry capability of the MU radar allows for the assessment of the model s ability to capture information about the fundamental input parameters of meteoroid source and speed. This paper demonstrates that the MIF is applicable to a wide range of HPLA radar instruments and increases the confidence of using the MIF as a global model, and it shows that the model accurately considers the speed and sporadic source distributions for the portion of the meteoroid population observable by MU.

Pifko, Steven↗

NASA NTRS2014

The Meteoroid Fluence at Mars Due to Comet C/2013 A1 (Siding Spring)

Long-period comet C/2013 A1 (Siding Spring) will experience a close encounter with Mars on 2014 Oct 19. A collision between the comet and the planet has been ruled out, but the comet's coma may envelop Mars and its man-made satellites. By the time of the close encounter, five operational spacecraft will be present near Mars. Characterizing the coma is crucial for assessing the risk posed to these satellites by meteoroid impacts. We present an analytic model of cometary comae that describes the spatial and size distributions of cometary dust and meteoroids. This model correctly reproduces, to within an order of magnitude, the number of impacts recorded by Giotto near 1P/Halley [1] and by Stardust near comet 81P/Wild 2 [2]. Applied to Siding Spring, our model predicts a total particle fluence near Mars of 0.02 particles per square meter. In order to determine the degree to which Siding Spring's coma deviates from a sphere, we perform numerical simulations which take into account both gravitational effects and radiative forces. We take the entire dust component of the coma and tail continuum into account by simulating the ejection and evolution of dust particles from comet Siding Spring. The total number of particles simulated is essentially a free parameter and does not provide a check on the total fluence. Instead, these simulations illustrate the degree to which the coma of Siding Spring deviates from the perfect sphere described by our analytic model (see Figure). We conclude that our analytic model sacrifices less than an order of magnitude in accuracy by neglecting particle dynamics and radiation pressure and is thus adequate for order-of-magnitude fluence estimates. Comet properties may change unpredictably and therefore an analytic coma model that enables quick recalculation of the meteoroid fluence is highly desirable. NASA's Meteoroid Environment Office is monitoring comet Siding Spring and taking measurements of cometary brightness and dust production. We will discuss our coma model and nominal fluence taking the latest observations into account.

Moorhead, A.↗

NASA NTRS2014

The Flux of Large Meteoroids Observed with Lunar Impact Monitoring

The flux of large meteoroids is not well determined due to relatively low number statistics, due mainly to the lack of collecting area available to meteor camera systems (10(2)-10(5) km2). Larger collecting areas are needed to provide reasonable statistics for flux calculations. The Moon, with millions of square kilometers of lunar surface, can be used as a detector for observing the population of large meteoroids in the tens of grams to kilogram mass range. This is accomplished by observing the flash of light produced when a meteoroid impacts the lunar surface, converting a portion of its kinetic energy to visible light detectable from Earth. A routine monitoring program at NASA's Marshall Space Flight Center has recorded over 300 impact flashes since early 2006. The program utilizes multiple 0.35 m (14 inch) Schmidt-Cassegrain telescopes, outfitted with video cameras using the 1/2 inch Sony EXview HAD CCDTM chip, to perform simultaneous observations of the earthshine hemisphere of the Moon when the lunar phase is between 0.1 and 0.5. This optical arrangement permits monitoring of approximately 3.8x10(6) km2 of lunar surface. A selection of 126 flashes recorded in 266.88 hours of photometric skies was analyzed, creating the largest and most homogeneous dataset of lunar impact flashes to date. Standard CCD photometric techniques outlined in [1] were applied to the video to determine the luminous energy, kinetic energy, and mass for each impactor, considering a range of luminous efficiencies. The flux to a limiting energy of 2.5x10(-6) kT TNT or 1.05×10(7) J is 1.03×10(-7) km(-2) hr(-1) and the flux to a limiting mass of 30 g is 6.14×10(-10) m(-2) yr(-1). Comparisons made with measurements and models of the meteoroid population indicate that the flux of objects in this size range is slightly lower (but within the error bars) than the power law distribution determined for the near Earth object population by [2].

Cooke, W. J.↗

NASA NTRS2015

Meteoroid-Induced Anomalies on Spacecraft

Many programs/projects use a simple meteoroid environment based on Grun's 1985 paper or the old NASA space station spec in their design and risk assessments. These models, which are omni directional and mono-velocity, bear little resemblance to the actual meteoroid environment, which is sun-fixed, very directional, and which has a complex speed distribution varying by source and particle size. As a result, the simple meteoroid models lead to estimates that underestimate the spacecraft/vehicle risk by a factor of 2 or more. In addition, programs often over-emphasize the risk posed by meteor showers, which typically account for less than ten percent of the meteoroid risk over the vehicle lifetime. Fueled by popular media, the emphasis on meteor showers (the risks from which can usually be mitigated operationally) can lead to ambivalence to the real risk driver, which is the sporadic background.

Cooke, William J.↗

NASA NTRS2016

The Mass Index and Total Mass of the Geminid Meteoroid Stream as Found with Radar, Optical, and Lunar Impact Data

The Geminid meteor shower was observed in 2015 using the Western Meteor Physics Group’s Canadian Meteor Orbit Radar (CMOR), Marshall Space Flight Center’s (MSFC) eight wide-field optical cameras, and MSFC’s lunar impact monitoring. These observations allowed Geminid fluxes to be calculated in three unique mass-ranges, from 1.8 (exponent -4) grams to 30 grams. From these fluxes, a mass index of 1.68 plus or minus 0.04 is found, which is in excellent agreement with past Geminid mass indices such as 1.69 found by Blaauw et al using only radar data and 1.7 found by Arlt and Rendtel using visual data. This mass index, however, is found over five orders of magnitude of mass, which allows a higher level of confidence that this mass index holds over a large portion of the stream. Mass indices are an important quantity to be accurately measured for a shower, indicating the distribution of mass in a well-studied stream in which we know the parent body (3200 Phaethon), improving forecasts of the shower activity, and allow fluxes to be scaled to high and low masses. The quantities derived here, along with a profile of the Geminid meteor shower activity in 2015 from CMOR, permit the total Geminid mass the Earth encountered in 2015 to be found, along with a minimum total mass of the Geminid meteoroid stream. Attempts have been made in the past to measure the mass of meteoroid streams using Zenithal Hourly Rate (ZHR) profiles, but here this new and improved treatment uses empirically derived fluxes and measured mass indices for the 2015 encounter with the meteoroid stream. This is to be compared with other meteoroid stream mass estimates including that of the Perseids, caused by comet Swift Tuttle.

Blaauw, R.↗

NASA NTRS2017

Luminous Efficiency of Hypervelocity Meteoroid Impacts on the Moon Derived from the 2015 Geminid Meteor Shower

Since early 2006 the Meteoroid Environment Office (MEO) at NASA's Marshall Space Flight Center has routinely monitored the Moon for impact flashes produced by meteoroids striking the lunar surface. Activity from the Geminid meteor shower (EM) was observed in 2015, resulting in the detection of 45 lunar impact flashes (roughly 10% of the NASA dataset), in about 10 hours of observation with peak R magnitudes ranging from 6.5 to 11. A subset of 30 of these flashes, observed 14-15 December, was analyzed in order to determine the luminous efficiency, the ratio of emitted luminous energy to the meteoroid's kinetic energy. The resulting luminous efficiency, found to range between n = 1.8 x 10(exp -4) and 3.3 x 10(exp -3), depending on the assumed mass index and flux, was than applied to calculate the masses of Geminid meteoroids striking the Moon in 2015.

Moser, D. E.↗

NASA NTRS2017

A Comparison of Damaging Meteoroid and Orbital Debris Fluxes in Earth Orbit

Low Earth orbit is populated with a substantial amount of orbital debris, and it is usually assumed that the flux from these objects contributes to most of the hypervelocity particle risk to spacecraft in this region. The meteoroid flux is known to be dominant at very low altitudes (<300 km), where atmospheric drag rapidly removes debris, and at very high altitudes beyond GEO (geostationary), where debris is practically non-existent. The vagueness of these boundaries has prompted this work, in which we compare the fluxes of meteoroids and orbital debris capable of penetrating a millimeter thick aluminum plate for circular orbits with altitudes ranging from the top of the atmosphere to 100,000 km. The outputs from the latest NASA debris and meteoroid models, ORDEM 3.0 and MEMR2, are combined with the modified Cour-Palais ballistic limit equation to make a realistic evaluation of the damage-capable particle fluxes, thereby establishing the relative contributions of hazardous debris and meteoroids in near Earth space.

Cooke, William↗

NASA NTRS2017

A Comparison of Damaging Meteoroid and Orbital Debris Fluxes in Earth Orbit

Low Earth orbit is populated with a substantial amount of orbital debris, and it is usually assumed that the flux from these objects contributes to most of the hypervelocity particle risk to spacecraft in this region. The meteoroid flux is known to be dominant at very low altitudes (less than 300 km), where atmospheric drag rapidly removes debris, and at very high altitudes (beyond geostationary), where debris is practically non-existent. The vagueness of these boundaries and repeated questions from spacecraft projects have prompted this work, in which we compare the fluxes of meteoroids and orbital debris capable of producing a millimeter-deep crater in aluminum for circular orbits with altitudes ranging from the top of the atmosphere to 100,000 km. The outputs from the latest NASA debris and meteoroid models, ORDEM 3.0 and MEMR2, are combined with the modified Cour-Palais ballistic limit equation to make a realistic evaluation of the damage-capable particle fluxes, thereby establishing the relative contributions of hazardous debris and meteoroids throughout near-Earth space.

Cooke, William↗

NASA NTRS2017

Meteoroids Impact the Moon

Most meteoroids are broken up by Earth's atmosphere before they reach the ground. The Moon, however, has little-to-no atmosphere to prevent meteoroids from impacting the lunar surface. Upon impact they excavate a crater and generate a plume of debris. A flash of light at the moment of impact can also be seen. Meteoroids striking the Moon create an impact flash observable by telescopes here on Earth. NASA observers use telescopes at the Automated Lunar and Meteor Observatory (ALaMO) to routinely monitor the Moon for impact flashes each month when the lunar phase is right. Flashes recorded by two telescope simultaneously rule out false signals from cosmic rays and satellites. Over 400 impact flashes have been observed by NASA since 2005. This map shows the location of each flash. No observations are made near the poles or center line. On average, one impact is observed every two hours. The brightest and longest-lasting impact flash was observed in Mare Imbrium on March 17, 2013. The imaging satellite Lunar Reconnaissance Orbiter, in orbit around the Moon, discovered the fresh crater created by this impact. The crater is 60 across and was caused by a meteoroid 9 inches in diameter likely traveling at a speed of 57,000 mph!

Moser, D. E.↗

NASA NTRS2018

The Ability of NASA's Meteoroid Engineering Model to Replicate in Situ Impact Data

Meteoroid environment models must describe the mass, directionality, velocity, and density distributions of meteoroids in order to correctly predict the rate at which meteoroids impact spacecraft. We present an updated version of NASA's Meteoroid Engineering Model (MEM) that better captures the correlation between directionality and velocity and incorporates a bulk density distribution. We compare the resulting model with the rate of large particle impacts seen on the Long Duration Exposure Facility (LDEF) and the Pegasus I and II satellites. The updated model shows closer agreement with these in situ data than previous versions of MEM.

Moorhead, Althea V.↗

NASA NTRSDate not supplied

The Ratio of Debris to Meteoroid-Induced Damage in Near-Earth Space

Orbital debris poses a substantial threat to many Earth-orbiting spacecraft, particularly those near Sun-synchronous altitudes. Man-made debris is not equally prevalent at all altitudes, however; geostationary satellites likely experience more damage from meteoroid impacts than from debris. We have conducted a comparison between debris- and meteoroid-induced damage on cubic aluminum spacecraft orbiting the Earth at a variety of altitudes and orbital inclinations using NASA's latest models of these environments: ORDEM 3.1 and MEM 3. We use the results to determine in which regions the risk is debris- or meteoroid-dominated, and find that debris dominates the risk between altitudes of about 600 and 1300 km above the Earth, while meteoroids dominate at altitudes less than 270 km or greater than 4800 km.

Althea Valkyrie Moorhead↗

NASA NTRSDate not supplied

The Ratio of Debris- to Meteoroid-Induced Damage in Near-Earth Space

Althea Moorhead↗

NASA NTRSDate not supplied

Smooth Particle Hydrodynamic Code Predictions for Meteoroid Damage to Thermal Protection Systems Shielded By Composite Structures

Interplanetary spacecraft are exposed to meteoroid fluxes with characteristics far exceeding the physical simulation capabilities of test facilities for predicting the likelihood that a meteoroid will penetrate a spacecraft’s critical systems. Accurate risk predictions are crucial to ensuring that important interplanetary missions, such as sample returns, can survive years of exposure to the meteoroid environment and safely reenter the Earth’s atmosphere with their scientific cargo. In this paper, we summarize a series of meteoroid impact damage computational simulations into two types of spacecraft composite protective structures using the Smooth Particle Hydrodynamics Code. We consider the effects of both meteoric materials and non-meteoric materials on a shielded forebody thermal protection system (TPS) for an extreme entry environment and on an unshielded aftbody TPS that is similar to the material covering the space shuttle’s external tank.

Brooke Corbett↗

NASA NTRSDate not supplied

Updated Numerical Analysis Benchmarks for Meteoroid Relevant Materials

Proposal for update of numerical analysis benchmark for meteoroid relevant materials. - Two recently performed shots are proposed to be numerical analysis benchmarks for numerical simulations of impacts of high-density meteoroids (Al 2 O 3 surrogate) and low-density meteoroids (Nylon surrogate). - A pair of general Whipple shields have been studied: - Bumper and rear walls are the same material and thickness between shields - Separation is 4.5 cm for Al 2 O 3 and 1.5 cm for Nylon - Information gathered includes high speed (1 MHz) shadowgraphs of debris cloud, bumper hole size and rear wall hole area.

Orbital Debris↗