Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Marginal emissions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Analysis of Distributed Energy Storage as a Core Grid Infrastructure via Production Cost Modeling

Energy storage plays a pivotal role in enabling power system operation with more flexibility and resilience. Unlike current practice that considers energy storages as attached ancillary devices, this paper focuses on storages as a core infrastructure by looking at their spatial distribution in the system. A sensitivity analysis based on production cost modeling is conducted to demonstrate the benefits of distributed energy storages. First, the modeling of energy storages in production cost modeling is presented. Second, potential optimal locations of distributed energy storages in a power system are discussed. Finally, multiple scenarios with various numbers and locations of additional distributed energy storages in the WECC 2030 model are created. The production cost modeling results of these scenarios show that distributed energy storages have higher utilization compared to the centralized ES units and therefore provide significantly more benefits in terms of reduction in generation cost, emission cost, and volatility of location marginal prices. A saturation effect is observed suggesting the selection of optimal locations will further improve the benefits.

Nguyen, Quan H.↗

Cambium Documentation: Version 2020

This is the documentation for the 2020 version of Cambium. Cambium is a tool that assembles structured data sets of simulated hourly cost and operational data for modeled futures of the U.S. electric sector with metrics designed to be useful for long-term decision-making. In this documentation, we define the metrics reported in Cambium databases and document the Cambium-specific methods for calculating those metrics.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Cambium 2023 Scenario Descriptions and Documentation

The National Renewable Energy Laboratory's (NREL's) Cambium data sets are annually released sets of simulated hourly emission, cost, and operational data for a range of modeled futures of the U.S. electric sector with metrics designed to be useful for long-term decision- making. The 2023 Cambium data set is the fourth annual release. The data sets are a companion product to NREL's Standard Scenarios, which are likewise released annually and are a set of projections of how the U.S. electric sector could evolve across a suite of different potential futures, but covering more scenarios with less temporal granularity (Gagnon et al. 2024). Information about Cambium and related publications can be found at https://www.nrel.gov/analysis/cambium.html, and the Cambium data sets can be viewed and downloaded at https://scenarioviewer.nrel.gov/. In this documentation, we describe Cambium 2023's scenarios, define the metrics, and document the Cambium-specific methods for calculating those metrics.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Copernicus observations of Ly-alpha and Mg II emission from HR 1099 /V711 Tauri/ and UX Ari

Ultraviolet observations of two RS CVn binaries obtained with Copernicus are described. High-resolution (0.05 A) U1 observations indicate that both HR 1099 and UX Ari display broad Ly-alpha emission. The Ly-alpha emission strength from HR 1099 is variable and seems to be correlated with orbital phase, while the UX Ari results indicate no significant variation. Moderate resolution (0.51 A) V2 scans of both systems show variable Mg II h and k emission-line profiles which usually matched the velocity of the more active star in each binary. Additionally, displaced emission components were seen at velocities of up to + or - 250 km/s, indicative of high-velocity gas motions. The radial velocities of these emission features from HR 1099 are marginally correlated with orbital phase. Highly active and variable chromospheric phenomena are found to be the most consistent explanation of these results.

Weiler, E. J.↗

Evaluation of a Mobile Phone for Aircraft GPS Interference

Measurements of spurious emissions from a mobile phone are conducted in a reverberation chamber for the Global Positioning System (GPS) radio frequency band. This phone model was previously determined to have caused interference to several aircraft GPS receivers. Interference path loss (IPL) factors are applied to the emission data, and the outcome compared against GPS receiver susceptibility. The resulting negative safety margins indicate there are risks to aircraft GPS systems. The maximum emission level from the phone is also shown to be comparable with some laptop computer's emissions, implying that laptop computers can provide similar risks to aircraft GPS receivers.

Nguyen, Truong X.↗

Identifying biomass yield potential of tetra, hexa, and octoploid prairie cordgrass populations grown on marginal lands

As the demand for renewable energy sources with reduced carbon emissions to the atmosphere increases, bioenergy crops remain an attractive alternative to fossil fuels. Another appeal of bioenergy crops is the potential utilization of marginal lands not suitable for food crops. Prairie cordgrass is a perennial warm season polyploid grass species being considered as a bioenergy crop that also exhibits a high tolerance for salinity and flooding. The ploidy level of prairie cordgrass has previously been suggested to correlate with agronomic traits. However, little is known about the agricultural performance of prairie cordgrass on marginal lands and if a correlation of ploidy level to stress tolerance exists. In this experiment, the productivity of tetraploids, hexaploids, and octoploids was investigated when grown on three different marginal sites including waterlogged, saline, and low-nutrient gravelly soils. Here we found that prairie cordgrass populations annually produced dry biomass on a wet marginal site comparable to normal cropland. However, the productivity was remarkedly decreased at both a salt-affected site and a limestone mine reclamation site. We were unable to conclude that different ploidy levels affected the biomass yield of prairie cordgrass grown under abiotic stress. However, there was a differential response of populations to various types of marginal sites. Finally, these results indicate potential genetic resources for developing breeding targets and identifying mechanisms of abiotic stress tolerance. Moreover, we highlight the need to generate diverse ploidy levels of prairie cordgrass in the same genetic backgrounds for future testing.

09 BIOMASS FUELS↗

Tax Credits for Clean Electricity: The Distributional Impacts of Supply-Push Policies in the Power Sector

We evaluate distributional and efficiency consequences of the bulk power clean electricity tax credits authorized by the 2022 Inflation Reduction Act. To do so, we link detailed electricity capacity expansion, computable general equilibrium, data-rich microsimulation, and air pollution models to estimate the policy incidence in terms of economic welfare and health impacts across a wide range of demographic groups. We evaluate the tradeoff between policy efficiency and income progressivity by comparing the tax credits to cap-and-trade policies that vary revenue recycling approaches. Under the scenarios analyzed the bulk power tax credits lead to increased clean electricity technology deployment resulting in a reallocation of capital from elsewhere in the economy, higher prices for capital and other goods, lower power prices, and lower emissions. The tax credits yield progressive outcomes for both economic welfare and health impacts. The health benefits exceed total policy costs and provide greater benefits for low-income and historically-marginalized households given the coincidence of household and emission source locations.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Tax Credits for Clean Electricity: The Distributional Impacts of Supply-Push Policies in the Power Sector

We evaluate distributional and efficiency consequences of the bulk power clean electricity tax credits authorized by the 2022 Inflation Reduction Act. To do so, we link detailed electricity capacity expansion, computable general equilibrium, microsimulation, and air pollution models to estimate economic welfare and health incidence across demographic groups. We evaluate trade-offs between policy efficiency and income progressivity by comparing the tax credits to cap-and-trade policies. The tax credits encourage increased clean electricity investment, resulting in a reallocation of capital from elsewhere in the economy, higher prices for capital and other goods, lower power prices, and lower emissions. The tax credits yield progressive outcomes for economic welfare at the expense of efficiency while all modeled policies demonstrate progressivity in health impacts. The health benefits, absent climate benefits, exceed total policy costs and provide greater benefits for low-income and historically marginalized households given coincidence of household locations and emissions exposure intensity.

distributional impacts↗

Comparative life cycle assessment of bioenergy in Japan from residual biomass-based wood pellets produced in the US Pacific Northwest

The US Pacific Northwest (PNW) faces an increase in wildfires due to forest overcrowding and climate change, posing significant environmental and public health risks. Traditional methods of managing surplus biomass, including prescribed burning, have increased air pollution and global warming. While in the PNW, residual woody biomass is being treated as waste, Japan’s growing demand for bio-based energy presents an opportunity to export value-added biomass as energy pellets. This study investigates whether producing wood pellets from the residual woody biomass from forest operations and sawmills for electricity generation in Japan is truly environmentally beneficial. Accordingly, we conducted a cradle-to-grave Life Cycle Assessment (LCA) to evaluate the environmental impact of residual pellets vs. coal for electricity generation. The assessment covered feedstock production, pellet processing, transportation, and combustion phases. Our findings indicate that replacing coal-based electricity in Japan with PNW residual pellet-based electricity can lower the Global Warming Potential (GWP) by about 90% for every unit of electricity displaced. Furthermore, the results show that repurposing the otherwise burnt harvest slash residues for pellet production would improve local air quality by reducing PM 2.5 and smog in the PNW. However, substituting coal with residual pellets marginally increased carcinogenic and ecotoxicity-related emissions. Based on these results, we conclude that substituting coal with residual wood pellets for electricity generation, particularly harvest-slash residual pellets, is environmentally beneficial across most impact categories, including the GWP. This research underscores how an export‑oriented pellet industry can help address the environmental challenges within the regional US wood products industry and global renewable energy supply.

Velappan, Hemalatha [Univ. of Washington, Seattle,↗

CMB-S4: Foreground-cleaning Pipeline Comparison for Measuring Primordial Gravitational Waves

We compare multiple foreground-cleaning pipelines for estimating the tensor-to-scalar ratio, r, using simulated maps of the planned CMB-S4 experiment within the context of the South Pole Deep Patch. To evaluate robustness, we analyze bias and uncertainty on r across various foreground suites using map-based simulations. The foreground-cleaning methods include: a parametric maximum likelihood approach applied to auto- and cross-power spectra between frequency maps; a map-based parametric maximum-likelihood method; and a harmonic-space internal linear combination using frequency maps. We summarize the conceptual basis of each method to highlight their similarities and differences. To better probe the impact of foreground residuals, we implement an iterative internal delensing step, leveraging a map-based pipeline to generate a lensing B-mode template from the large aperture telescope frequency maps. Our results show that the performance of the three approaches is comparable for simple and intermediate-complexity foregrounds, with σ(r) ranging from 3–5 ×10 −4 . However, biases at the 1σ–2σ level appear when analyzing more complex forms of foreground emission. By extending the baseline pipelines to marginalize over foreground residuals, we demonstrate that contamination can be reduced to within statistical uncertainties, albeit with a pipeline-dependent impact on σ(r), which translates to a detection significance between 2σ and 4σ for an input value of r = 0.003. These findings suggest varying levels of maturity among the tested pipelines, with the auto- and cross-spectra-based approach demonstrating the best stability and overall performance. Moreover, given the extremely low noise levels, mutual validation of independent foreground-cleaning pipelines is essential to ensure the robustness of any potential detection.

astronomy data analysis↗

Rotational modulation and flares on RS CVn and BY Dra stars. III - IUE observations of V711 Tau (= HR 1099), II Peg, and AR Lac

Observations of three RS CVn stars, which were obtained over the stellar rotation cycles with the IUE satellite, are presented. Emission lines from high-temperature transition regions and chromospheres analogous to those observed in the solar spectrum were observed. The only visible component of II Peg and both components of V711 Tau and AR Lac appear to be chromospherically active. For the latter systems, the Mg II line surface flux from the G-type star is higher than that from the K subgiant, which dominates the observed UV line flux. Moreover, evidence of long-term ultraviolet variability is presented for AR Lac. The emission line fluxes for II Peg and, marginally, for the other two systems were observed to vary in antiphase with the optical variations at the time of the IUE observations. By comparing the results of Rodono et al. (1986) for two-spot models with the variation of UV line flux, evidence of a close spatial correlation between spot and plagelike features is found.

Rodono, M.↗

Finding Promising Candidates for Wet Growing Conditions: The Effect of Two Row Spacings on Biomass Production of Four Bioenergy Prairie Cordgrass Populations in a Wet Marginal Land

Demand for energy and the environmental consequences associated with fossil fuel emissions has created a need for alternative energy sources. To avoid conflict over the conversion of existing agricultural land from food production to fuel production, bioenergy crops could instead be cultivated on marginal land. Here, this study compared the performances, biomass yield, tiller density, and lignocellulosic bioenergy feedstock composition of four prairie cordgrass populations with two-row spacings cultivated on a waterlog-prone marginal land, as well as three other bioenergy candidate crops used as controls: big bluestem, M. × giganteus , and switchgrass. Across all populations and spacings, annual biomass yield of prairie cordgrass was 13 Mg ha −1 . Row spacing had significant impacts on prairie cordgrass productivity, with higher biomass yields observed in the 45 cm spacing than in the 90 cm spacing. Feedstock composition (cellulose, hemicellulose, ADL, and ash concentration) was not influenced by row spacing and did not deviate from expected values for growth on agricultural lands. However, biomass yields of the control species M . × giganteus and switchgrass planted in 45 cm spacing were higher than the prairie cordgrass. Our results provide evidence that prairie cordgrass could be a good energy crop with comparable biomass yield production to the energy crops M . × giganteus and switchgrass on waterlogged marginal land.

Bioenergy crops↗

Impact of landscape design on the greenhouse gas emissions of shrub willow bioenergy buffers in a US Midwest corn-production landscape

Previous studies have evaluated the economics and ecosystem services of perennial bioenergy crops when replacing grain crops on marginal (environmentally critical and/or underproductive) lands. This study used life-cycle analysis (LCA) to investigate the greenhouse gas (GHG) emissions of perennial crops when grown in targeted landscape positions and their impact in reducing nitrogen leaching. Specifically, LCA was performed to evaluate the GHG emissions of growing shrub willow on marginal lands in the Indian Creek watershed in Illinois to assess the sustainability of strategically planted willow buffer strips. Willow was grown as a short-rotation woody crop with a 21-year rotation under three scenarios including a business-as-usual (BAU) field-scale production with nitrogen fertilizer application and two unfertilized subfield buffer scenarios – landscape single subfield (LSSF) or landscape multiple subfields (LMSF) – grown alongside cornfields to reduce nitrate leaching. Each scenario also considers three field sizes, 2.0, 10.1, and 40.5 ha. The average annual GHG emissions from willow production and depot transportation were 0.32–0.77 Mg-CO 2 e ha-1 with the lowest emissions for the LSSF scenario and highest for the BAU. The GHG emissions for the LSSF and BAU scenarios are independent of field size, whereas LMSF emissions increase with increasing field size, 0.41 Mg-CO 2 e ha-1 at 2.0 ha and 0.76 Mg-CO 2 e ha-1 at 40.5 ha. Emission results were most sensitive to the willow yield, followed by fertilizer application rate (BAU only), harvest fuel consumption, and transportation distance.

09 BIOMASS FUELS↗

Price Formation and Grid Operation Impacts from Variable Renewable Energy Resources

Increasing amounts of Variable Renewable Energy Resources (VREs) impact electricity markets and their operation. VREs are intermittent, zero marginal cost resources that tend to displace emissions-intensive generators in electricity dispatch, reducing emissions, but impacting price formation, revenue sufficiency, reliability, and market power mitigation processes of electricity markets. But VREs are not the only factor that affects operational and financial challenges in electricity markets. Declining natural gas prices, changing resource mixes, as well as different electricity market designs and regulatory policies all factor into the challenges both electricity market participants and operators face in today’s electricity markets. With this in-depth examination of electricity markets and related literature review, we aim to inform on key challenges of market design and operation for successful integration of large amounts of zero marginal cost resources. We’ve identified several areas, including VREs impact on price formation, revenue sufficiency, reliability, market power monitoring and mitigation, as well as how state-level incentives and market design impact VREs and these challenges. With each key challenge, we survey the literature to answer the question: To what extent is the problem, and how has it evolved over time? We first conduct a thorough review of ongoing challenges in electricity markets to understand the problem and review the empirical literature to capture important findings on how VREs, specifically, impact the problem. From this review, we highlight metrics that are important to understanding VRE integration and how market designs and outcomes are evolving with increasing levels of VREs. We propose several empirical models for future research to determine the impact of VREs on these identified challenges.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Carbon management technology pathways for reaching a U.S. Economy-Wide net-Zero emissions goal

The Carbon Management Study Group of the 37 th Energy Modeling Forum (EMF 37) designed seven scenarios to explore the role of three potentially key technology suites – point source carbon dioxide capture and storage (PSCCS), direct air capture of carbon dioxide (DACCS), and hydrogen systems (H 2 ) – in shaping the broader technology pathways to reaching net-zero carbon dioxide (CO 2 ) emissions in United States by 2050. Each scenario was run by up to 13 models participating in the EMF 37 study. Results show that carbon dioxide removal technologies were consistently a major part of successful pathways to net-zero U.S. CO 2 emissions in 2050. Achieving this net-zero CO 2 goal without any form of carbon dioxide capture and storage was found to be impossible for most models; some models also found it impossible to reach net-zero without DACCS. The marginal cost of achieving net-zero CO 2 emissions in 2050 was between two and 10 times higher without PSCCS and/or DACCS available. The carbon price at which DACCS was deployed as a backstop technology depended upon the assumed cost at which DACCS was available at scale. Carbon prices were between $\$$250 and $\$$500 per ton CO 2 when DACCS deployed as a backstop. The average CO 2 capture rate across all models in 2050 in the central net-zero scenario was 1.3 GtCO 2 /year, which implies a substantial upscaling of capacity to move and store CO 2 . Finally, hydrogen sensitivity scenarios showed that H 2 typically constituted a relatively small share of the overall U.S. energy system; however, H 2 deployed in applications that are considered hard to decarbonize, facilitating transition towards net-zero emissions.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Circumnuclear molecular gas in starburst and Seyfert galaxies

In order to investigate circumnuclear molecular gaseous contents and their relation to the nuclear activity, researchers made a search for circumnuclear (12)CO (J=1-0) emission from 28 starburst-nucleus galaxies (SBNs) and 12 Seyfert galaxies with the recession velocities less than 5000 km/s, using the Nobeyama Radio Observatory 45-m telescope. The full half-power beam width of 17 arcsec covers a region of less than about 5 kpc in diameter for the sample galaxies. The circumnuclear CO emission was detected from twelve SBNs (one is marginal) and four Seyfert galaxies. The main results and conclusions are summarized. Researchers derived the circumnuclear surface density of molecular gas which is corrected for inclination of the galaxies. This analysis shows that the surface density spans a wide range over two orders of magnitude. Further, there is no significant difference in the surface densities between types 1 and 2 Seyfert galaxies. Thus, we may conclude that the circumnuclear molecular content is not a key parameter producing the dichotomy of the Seyfert galaxies. It is also shown that there is no significant difference in the circumnuclear surface densities of molecular gas among the Seyfert, starburst, and normal galaxies. This implies that the circumnuclear gaseous content is not a key parameter determining which activity occurs in nuclei. We may conclude that more centrally condensed (i.e., less than 10 - 100 pc in diameter) gas components play an essential role on the occurrence of nuclear activities. Comparing results with the previous ones, researchers deduced radial distribution of surface density of molecular gases. They cannot obtain evidence for strong central concentration of molecular gas in the sample Seyfert galaxies except for NGC 3227. This is consistent with the previous result by Blitz, Mathieu, and Bally (1986). Comparing the CO emission line profiles with the previous ones taken with the larger beams, researchers discovered circumnuclear components of molecular gases. In particular, they found that molecular gas clouds may be absent in the SE of the nucleus of NGC 7469 where the high-excitation emitting region is discovered by Heckman et al. (1986). It is suggested that the nuclear activity (strong radiation and/or wind) may destruct the molecular clouds in that region.

Taniguchi, Yoshiaki↗

Reduction of gaseous pollutant emissions from gas turbine combustors using hydrogen-enriched jet fuel

Recent progress in an evaluation of the applicability of the hydrogen enrichment concept to achieve ultralow gaseous pollutant emission from gas turbine combustion systems is described. The target emission indexes for the program are 1.0 for oxides of nitrogen and carbon monoxide, and 0.5 for unburned hydrocarbons. The basic concept utilizes premixed molecular hydrogen, conventional jet fuel, and air to depress the lean flammability limit of the mixed fuel. This is shown to permit very lean combustion with its low NOx production while simulataneously providing an increased flame stability margin with which to maintain low CO and HC emission. Experimental emission characteristics and selected analytical results are presented for a cylindrical research combustor designed for operation with inlet-air state conditions typical for a 30:1 compression ratio, high bypass ratio, turbofan commercial engine.

Clayton, R. M.↗

Single-fuel reactivity controlled compression ignition through catalytic partial oxidation reformation of diesel fuel

A single-fuel RCCI concept has been proposed to avoid the need for a secondary fuel system required for conventional RCCI by generating the secondary fuel from the primary fuel through catalytic partial oxidation (CPOX) reformation. In conventional RCCI, gasoline or natural gas can be used as the low-reactivity fuel, and diesel can be used as the high-reactivity fuel. In this study, two reformate mixtures generated by reforming diesel fuel at different operating conditions were used as the low-reactivity fuel, with the parent diesel as the high reactivity fuel. The combustion characteristics of reformate-diesel RCCI were compared with the conventional RCCI. A CFD model was also developed and validated against the experimental results. The model was then used to validate a necessary approximation of the reformate mixture's species concentrations. Compared to conventional RCCI fuel pairs, reformate-diesel RCCI shows marginally better thermal efficiency, approximately 10% better THC emissions, approximately 50% lower NOx emissions, and good controllability. Because the reformate mixture has a high concentration of diluents it displaces a large fraction of intake air and acts similarly to EGR. The combustion behavior of reformate-diesel RCCI is in between that of gasoline-diesel and natural gas-diesel conventional RCCI. From the results, it can be concluded that reformate-diesel RCCI is not overly sensitive to the reformation process itself and the exact species concentrations in the reformate mixture. Finally, a small change in the start of injection of diesel, blend ratio, and EGR fraction can be used to compensate for reformate mixture concentration differences.

33 ADVANCED PROPULSION SYSTEMS↗