Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MICROANALYSIS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Process modifications for improved carbon fiber composites: Alleviation of the electrical hazards problem

Attempts to alleviate carbon-fiber-composite electrical hazards during airplane crash fires through fiber gasification are described. Thermogravimetric and differential scanning calorimetric experiments found several catalysts that caused fibers to combust when composites were exposed to test fires. Composites were tested in the 'Burn-Bang' apparatus and in high voltage electrical detection grid apparatus. In a standard three minute burn test modified composites released no fibers, while state-of-the-art composites released several hundred fiber fragments. Expected service life with and without catalytic modification was studied and electron microscopy and X-ray microanalysis furnished physical appearance and chemical composition data. An acrylic acid polymer fiber coating was developed that wet the carbon fiber surface uniformly with the catalyst, providing a marked contrast with the uneven coats obtained by solution-dipping.

Ramohalli, K.↗

Electron-optical observations of ordered FeNi in the Estherville meteorite

Electron optical studies of the ordered FeNi (taenite) phase in the Estherville meteorite are reported. A thin section of the meteorite containing a large area of continuous anisotropic taenite was studied by crossed polar reflected light microscopy, and electron probe microanalysis, transmission electron microscopy, scanning transmission electron microscopy and X-ray energy dispersive spectrometry. Results reveal the presence of preferentially ion-etched regions of clear taenite corresponding to single crystals, with superlattice reflections in the fundamental FeNi reciprocal lattice arising from long-range ordering. The presence of antiphase domain boundaries within the regions also confirms the presence of ordering. It is thus proposed that clear taenite in the Estherville meteorite contains regions of ordered FeNi phase in a disordered gamma-phase matrix.

Mehta, S.↗

Metallic particles in the glassy constituents of three lunar highland samples 65315, 67435 and 78235

Electron probe microanalysis and analytical electron microscopy techniques were employed to obtain structural and chemical analyses of metal particles in the size range of less than 1000 A and greater than 5 microns from the glassy constituents of 3 lunar highland samples 65315, 67435 and 78235. Most of the micron size metal particles in the glass coatings of the three samples are of meteoritic Co-Ni content. The Ni content of submicron metal often differs significantly from the micron size metal in the same glass. This difference can be explained by one of 3 reasons: (a) the presence of metal of different sizes and Ni contents in the rock prior to the shock event, (b) the presence of metal particles in the lunar soil of meteoritic or variable Ni content which were incorporated when the glass formed and (c) the production of submicroscopic Fe metal from the reduction of Fe(+2) in the shock produced melt.

Mehta, S.↗

Petrography of lunar soil 15601

Lunar soil 15601 has been studied petrographically using grain size analysis, modal analysis, and electron probe microanalysis of monomineralic fragments in the 90-150-micron size fraction. The soil is immature; the grain size distribution is unimodal and very symmetrical, indicating that the soil is a homogeneous product of a single set of processes. It is concluded that 15601 is mostly a simple Apollo 15 mare basalt soil, and its properties can be used to approximate an end product of the array of complex soils that the lunar sample missions have returned.

Basu, A.↗

Carbon in the Allende meteorite - Evidence for poorly graphitized carbon rather than carbyne

A carbon-rich acid residue from the Allende carbonaceous chondrite was examined by high-resolution transmission electron microscopy (HRTEM) and also by analytical electron microscopy. A TEM mount of this residue that has previously been reported to contain carbyne forms of carbon was shown to contain sheet silicate contaminants. These sheet silicate grains give electron diffraction patterns similar to those reported for carbynes, thus raising questions about the previous report of carbynes in this residue. Furthermore, two crystals from a glacier microspherule, which had previously been identified as carbyne VIII, were shown by microanalysis to be talc. In view of these observations it is suggested that identifications of carbyne by electron diffraction should be supported by microanalyses of the individual grains. HRTEM investigations of the Allende carbon indicate that it is a poorly crystalline graphite, structurally similar to 'glassy' carbon

Smith, P. P. K.↗

Kinetics and mechanism of the oxidation process of two-component Fe-Al alloys

The oxidation process of two-component Fe-Al alloys containing up to 7.2% Al and from 18 to 30% Al was studied. Kinetic measurements were conducted using the isothermal gravimetric method in the range of 1073-1223 K and 1073-1373 K for 50 hours. The methods used in studies of the mechanism of oxidation included: X-ray microanalysis, X-ray structural analysis, metallographic analysis and marker tests.

Przewlocka, H.↗

Inter-layered clay stacks in Jurassic shales

Scanning electron microscopy in the backscattered electron mode is used together with energy-dispersive X-ray microanalysis to show that Lower Jurassic shales from the North Sea Basin contain large numbers of clay mineral stacks up to 150 microns in size. Polished shale sections are examined to determine the size, shape orientation, textural relationships, and internal compositional variations of the clays. Preliminary evidence that the clay stacks are authigenic, and may have formed at shallow burial depths during early diagenesis, is presented.

Pye, K.↗

Crystallization of the glassy phase of grain boundaries in silicon nitride

Three types of hot-pressed silicon nitride specimens (containing 5wt% Y2O3 and 2wt% Al2O3 additives) which were subjected to different temperature heat treatments were studied by X-ray diffraction, X-ray microanalysis and high resolution electron microscopy. The results indicated that there were phase changes in the grain boundaries after heat treatment and the glassy phase at the grain boundaries was crystallized by heat treatment.

Jefferson, D. A.↗

Mineralogy and petrology of chondrules and inclusions in the Mokoia CV3 chondrite

The inclusions and chondrules of the Mokoia CV3 chondrite are studied systematically and compared with those in the Allende meteorite. Five polished thin sections of Mokoia were examined by optical microscopy, backscattered scanning electron microscopy, and electronprobe microanalysis, and objects greater than about 100 microns in apparent diameter were measured and classified petrographically. Three major types of olivine chondrules are distinguished: igneous chondrules, which evidently crystallized from droplets of silicate melt; recrystallized chondrules, apparently metamorphosed at relatively high temperatures; and accretional aggregates, which are probably fragments of igneous chondrules. Refractory inclusions in Mokoia are generally similar to those found in Allende, although Mokoia inclusions include phyllosilicates rather than feldspathoids and melilite-rich Ca, Al-rich inclusions (CAIs) are more abundant in Allende. The small, fine-grained CAIs, which are more abundant than coarse-grained CAIs in both meteorites, are observed to represent aggregates of three distinct constituents: concentric objects, chaotic material and inclusion matrix. It is concluded that most of the CAIs probably formed during metamorphism, partial melting, and incomplete distillation of primitive dust aggregates heated in the solar nebula.

Cohen, R. E.↗

The global sulfur cycle

The results of the planetary biology microbial ecology's 1984 Summer Research Program, which examined various aspects of the global sulfur cycle are summarized. Ways in which sulfur flows through the many living and chemical species that inhabit the surface of the Earth were investigated. Major topics studied include: (1) sulfur cycling and metabolism of phototropic and filamentous sulfur bacteria; (2) sulfur reduction in sediments of marine and evaporite environments; (3) recent cyanobacterial mats; (4) microanalysis of community metabolism in proximity to the photic zone in potential stromatolites; and (5) formation and activity of microbial biofilms on metal sulfides and other mineral surfaces. Relationships between the global sulfur cycle and the understanding of the early evolution of the Earth and biosphere and current processes that affect global habitability are stressed.

Sagan, D.↗

Mineral chemistry and origin of spinel-rich inclusions in the Allende CV3 chondrite

The present electron probe microanalysis of 20 spinel-rich inclusions in Allende indicates that the mineralogy of spinel-rich Allende inclusions is similar to that of fine grained Ca, Al-rich inclusions (CAIs) in ALH-77003 and rims on coarse grained CAIs in Allende. The mineralogy, mineral chemistry, and bulk chemistry of the inclusions indicate that they are not primitive aggregates of crystalline nebular condensates, but rather aggregates of minute concentric objects that are presently interpreted to be a fractionated distillation residue that lost Ca, Si-rich partial melt. It is suggested that interstellar dust aggregates were melted or distilled into Allende inclusions by aerodynamic drag heating, in regions of the nebula where the dust/gas ratio was so enhanced that the local oxygen fugacity was raised by several order of magnitude and liquids became thermodynamically stable.

Kornacki, A. S.↗

Antarctic Meteorite Newsletter, volume 9, no. 2

Preliminary description and classifications of meteorites that were completed since publication of the February issue are contained. Most large (greater than 150 g) specimens (regardless of petrologic type) and all pebble sized (less than 150 g) specimens of special petrologic type are represented by separate descriptions. However, specimens of nonspecial petrologic type are listed only as single line entries. For convenience, new specimens are also recast by petrologic type. Each macroscopic description summarizes features that were visible to the eye at the time the meteorite was first examined. Classification is based on microscopic petrography and resonnaissance-level electron-probe microanalysis. The pairing list was updated.

Gooding, J. L.↗

Analytical electron microscopy of extraterrestrial materials - Results from microtome sections of carbonaceous chondrites and interplanetary dust particles

The paper describes a method for embedding, sectioning, and observing two types of extraterrestrial materials, including hydrated interplanetary dust particles (IDPs) and carbonaceous chondrite meteorites. The technique, which produces large thin areas suitable for both high-resolution imaging and thin-film microanalysis, was applied to study the petrology of the IDP Ames-DE C86-11, the Murchison carbonaceous chondrite matrix, and the Allende dark inclusion. The technique makes it possible to maintain delicate interfaces, boundaries, and phase relationships between grains. Because phases are held in place, layer lattice silicates and other minerals with strong preferred orientations can be viewed in any orientation, including the orientation normal to their basal planes.

Blake, D. F.↗

Low temperature phase transformations in the metallic phases of iron and stony-iron meteorites

The nickel content and the structure of kamacite and decomposed taenite (clear taenite 1, CT-1; the cloudy zone, CZ; and clear taenite 2, CT-2) in the metallic phases of meteorites were determined using X-ray microanalysis techniques in the AEM. The kamacite near the CT-1 interface was found to contain about 4 wt pct Ni. The CT-1 structure contains 51.4-45.6 wt pct Ni; it is ordered FeNi with the L1(0) superstructure. The CZ structure consists of two phases: a globular phase (ordered FeNi containing 50.9 wt pct Ni) and a surrounding honeycomb martensitic phase containing 11.7 wt pct Ni. The CT-2 was found in all of the iron meteorite groups studied and in the pallasites, but not in the mesosiderites. Based on the preliminary evidence, this region is believed to be ordered Fe3Ni. Possible mechanisms for the decomposition of taenite are discussed.

Reuter, K. B.↗

The interface in tungsten fiber reinforced niobium metal-matrix composites

The creep resistance of tungsten fiber reinforced niobium metal-matrix composites was evaluated. The interface region between the fiber and matrix was characterized by microhardness and electron probe microanalysis measurements which indicated that its properties were between those of fiber and matrix. However, the measured properties of the composite exceeded those calculated by the rule of mixtures even when the interface zone was assumed to retain all the strength of the fiber. The composite structure appeared to enhance the strengths of both the fibers and the matrix above what they exhibited in stand-alone tests. The effect of fiber orientation and matrix alloy composition on the fiber/matrix interface were also evaluated. Small alloying additions of zirconium and tungsten to the niobium matrix affected the creep resistance of the composites only slightly. A decrease in the creep resistance of the composite with increasing zirconium content in the matrix was ascribed to an increase in the diffusion rate of the fiber/matrix interdiffusion reaction, and a slight increase in the creep resistance of the composite was observed with an addition of 9 w percent tungsten to the matrix. In addition, Kirkendall void formation was observed at the fiber/matrix interface; the void distribution differed depending on the fiber orientation relative to the stress axis.

Grobstein, Toni L.↗

Petrology and provenance of Apollo 15 drive tube 15007/8

The petrology of submillimeter fractions of soils from 13 levels of Apollo 15 drive tube 15007/8 have been studied through grain size analysis, modal analysis of the 90-150 micron sieve fraction, and electron probe microanalysis of monomineralic fragments of olivine, pyroxene, and plagioclase from the soils. It is shown that core 15007/8 does not contain distinct lithologic units and probably contains soils of mixed maturity in which mixing has greatly dominated in situ reworking. No petrologic layering is found in the core. Abundances of KREEP basalts correlate with mare basalts and not with anorthosite, norite, and troctolite components from the Apennine Front. Some olivine and pyroxene fragments with mare basalt affinity are found to be optically and chemically unzoned, suggesting that they may have been derived from unusual source rocks.

Basu, Abhijit↗

Identification and characterization of extraterrestrial non-chondritic interplanetary dust

Interplanetary dust particles (IDPs) are among the most pristine and primitive extraterrestrial materials available for direct study. Most of the stratospheric particles selected for study from the JSC Curatorial Collection were chondritic in composition (major element abundances within a factor of two of chondritic meteorites) because this composition virtually ensures that the particle is from an extraterrestrial source. It is likely that some of the most interesting classes of IDP's have not been recognized simply because they are not chondritic or do not fit established criteria for extraterrestrial origin. Indeed, mass spectroscopy data from the Giotto Flyby of comet Halley indicate that a substantial fraction of the dust is in the submicron size range and that a majority of these particles contain C, H, O, and/or N as major elements. The preponderance of CHON particles in the coma of Halley implies that similar particles may exist in the JSC stratospheric dust collection. However, the JSC collection also contains a variety of stratospheric contaminants from terrestrial sources which have these same characteristics. Because established criteria for extraterrestrial origin may not apply to such particles in individual cases, and integrated approach is required in which a variety of analysis techniques are applied to the same particle. Non-chondritic IDP's, like their chondritic counterparts, can be used to elucidate pre- and early solar system processes and conditions. The study of non-chondritic IDP's may additionally yield unique information which bears on the nature of cometary bodies and the processing of carbonaceous and other low atomic number materials. A suite of complementary techniques, including Low Voltage Scanning Electron Microscopy (LVSEM), Energy-Dispersive X-ray Microanalysis (EDX), Secondary Ion Mass Spectrometry (SIMS) isotope-ratio imaging and Analytical Electron Microscopy (AEM), were utilized to accomplish the following two objectives: (1) to develop criteria for the unequivocal identification of extraterrestrial non-chondritic IDP's; and (2) to infer IDP parent body, solar nebula, and pre-solar conditions through the study of phases, textures, and components contained within non-chondritic IDP's. The general approach taken is designed to maximize the total information obtained from each particle. Techniques will be applied in order from least destructive to most destructive.

Blake, D. F.↗

Surface migration and volume diffusion in the AgGaSe2-Ag2Se system

Surface migration and volume diffusion in the Ag2Se-AgGaSe2 system were investigated using reactive diffusion couples which were analyzed by X-ray diffraction, optical microscopy, and electron probe microanalysis. The surface diffusivities of all mobile species are found to be much larger than volume diffusivities. The results of the study suggest that Se moves together with Ag and Ga to maintain binary (Ag2Se and Ga2Se3) stoichiometry and electroneutrality. The dominance of surface migration kinetics can account for the uniform annihilation of second-phase precipitates during heat treatments.

Kim, N.-H.↗