SEARCH · Engineering Papers
Results for “MAGNETIC FILM”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Critical Current Measurements of Superconducting Thin Films in Pulsed Magnetic Fields
Explore the source record for details and available documents.
Challenges to magnetic doping of thin films of the Dirac semimetal Cd 3 As 2
Magnetic doping of topological quantum materials provides an attractive route for studying the effects of time-reversal symmetry breaking. Thus motivated, we explore the introduction of the transition metal Mn into thin films of the Dirac semimetal Cd 3 A s2 during growth by molecular beam epitaxy. Scanning transmission electron microscopy measurements show the formation of a Mn-rich phase at the top surface of Mn-doped Cd 3 A s2 thin films grown using both uniform doping and delta doping. This suggests that Mn acts as a surfactant during epitaxial growth of Cd 3 A s2 , resulting in phase separation. Magnetometry measurements of such samples indicate a ferromagnetic phase with out-of-plane magnetic anisotropy. Electrical magneto-transport measurements of these films as a function of temperature, magnetic field, and chemical potential reveal a lower carrier density and higher electron mobility compared with pristine Cd 3 A s2 films grown under similar conditions. This suggests that the surfactant effect might also serve to remove impurities from the bulk of the film. Further, we observe robust quantum transport (Shubnikov-de Haas oscillations and an incipient integer quantum Hall effect) in very thin (7 nm) Cd 3 A s2 films despite being in direct contact with a structurally disordered surface ferromagnetic overlayer.
Niobium thin films are superconductive in strong magnetic fields at low temperatures
Niobium film superconductor carries high currents in strong magnetic fields. The thin niobium film is formed on an inert substrate through evaporation in a vacuum environment. Control of temperature and vacuum results in rejection of gaseous impurities so that the film is of a very high purity.
Anisotropic domains and antiferrodistortive-transition controlled magnetization in epitaxial manganite films on vicinal SrTiO 3 substrates
We studied the microstructural evolution and magnetism of ferroelastic La 0.9 Sr 0.1 MnO 3 (LSMO) epitaxial thin films grown on SrTiO 3 (001) substrates with different miscut angles. The substrate miscut angle plays a critical role in controlling the in-plane magnetic anisotropy. The microscopic origin of such magnetic anisotropy is attributed to the formation of anisotropic stripe domains along the surface step terraces. The magnetization in the LSMO films was found to be selectively modulated by the antiferrodistortive phase transition of the SrTiO 3 substrate. This phenomenon has been qualitatively explained by a strain modified Stoner–Wohlfarth model. We conclude that the magnetization modulation by the SrTiO 3 phase transition depends on h, the ratio of applied magnetic field to the saturation field. Such modulation is only visible with h < 1. The established domain microstructure–anisotropy–magnetism correlation in manganite films can be applied to a variety of complex oxide thin films on vicinal substrates.
High magnetic field superconducting properties of Nb3Sn films Final report
High magnetic field superconducting properties of niobium stannide films and shielding characterictics of stannide layers
Positioning X-Ray Film With String And Magnets
Technique devised to position x-ray film in normally inaccessible places for inspection of welded joints. Lead/magnet markers and string attached to ends of strips of x-ray film to facilitate positioning. Fewer shots required than in random trial-and-error sequence, and resulting images more accurate.
Magnets position X-ray film for weld inspection
Film-positioning device uses magnets to hold X ray film for weld inspection in nonferrous structures, such as tanks, where access to interior points is difficult.
Intergranular Spin Dependent Tunneling Dominated Magnetoresistance in Helimagnetic Manganese Phosphide Thin Films
Helical magnets are emerging as a novel class of materials for spintronics and sensor applications; however, research on their charge- and spin-transport properties in a thin film form is less explored. Herein, we report the temperature and magnetic field-dependent charge transport properties of a highly crystalline MnP nanorod thin film over a wide temperature range (2 K < T < 350 K). The MnP nanorod films of ~100 nm thickness were grown on Si substrates at 500 °C using molecular beam epitaxy. The temperature-dependent resistivity ρ(T) data exhibit a metallic behavior (dρ/dT > 0) over the entire measured temperature range. However, large negative magnetoresistance (Δρ/ρ) of up to 12% is observed below ~50 K at which the system enters a stable helical (screw) magnetic state. In this temperature regime, the Δρ(H)/ρ(0) dependence also shows a magnetic field-manipulated CONE + FAN phase coexistence. The observed magnetoresistance is dominantly governed by the intergranular spin dependent tunneling mechanism. These findings pinpoint a correlation between the transport and magnetism in this helimagnetic system.
Antiferromagnetic V 2 O 3 based exchange coupling
Vanadium sesquioxide (V 2 O 3 ) is a strongly correlated electronic material that famously undergoes a triple coupled first-order transition where it transitions from a paramagnetic metal with a rhombohedral structure at high temperature to an antiferromagnetic insulator with a monoclinic structure. While several studies have used one of both electronic and structural transitions to control the properties of a heterostructure, evidence of magnetic coupling has notoriously yet to be found. In this paper, we report on a robust magnetic coupling between the antiferromagnetic (AFM) V 2 O 3 and ferromagnetic (FM) Permalloy (Py) layers that results in a significant exchange bias and strain-induced coercivity enhancement. We provide a temperature and angle-dependent study of magnetic properties, which clearly indicates exchange bias at the AFM/FM interface that appears at the onset of the metal-insulator transition. The magnitude of the exchange bias is strongest when the field is applied along the [001] V 2 O 3 crystallographic orientation which corresponds to an AFM spin configuration on the [110] surface. Here, this opens the door to designing and implementing novel functionalities in transition metal oxide-based computing using the connection between magnetism and the metal-insulator transition.
Effect of lattice strain on magnetism in epitaxial YCrO 3 films
The influence of lattice strain on magnetism is studied for perovskite rare-earth chromite, YCrO 3 (YCO) thin films. A combined theoretical and experimental approach is used to demonstrate the correlation between lattice-strain and magnetic properties of YCO films. The first-principles calculations reveal that the local Cr magnetic moments and the out-of-plane magnetization linearly increase with changing the in-plane lattice strain from compressive to tensile. The experimental results agree with the theory findings showing a strong dependence of magnetization on epitaxial strain in YCO films. These results unveil the lattice-strain-controlled functionalities on perovskite rare-earth chromites and related material systems.
Interfacial magnetization enhancement and the perpendicularly magnetized component in Fe16N2 thin films
A detailed study of depth-resolved magnetization and microstructure of Fe16N2 thin films on MgO (001) and MgAl2O4 (001) substrates and Fe and Cr seed layers is presented. Two aspects of the magnetic properties of Fe16N2 thin films are discussed. First, magnetization enhancement at the interface is observed. Strain and nitrogen deficiency are discussed as possible interfacial mechanisms contributing to this enhancement. Second, the perpendicularly magnetized component (PMC) is identified in Fe16N2 thin films. Correlation with microstructural observations suggests that the PMC is associated with V-shaped grains that are not fully confined within the continuous Fe16N2 layer.
Magnetic character of very thin permalloy films.
Thickness dependence of anisotropy, magnetization, and longitudinal coercive force in very thin permalloy films
Magneto-optic superlattice thin films: Fabrication, structural and magnetic characterization
During this quarter studies were extended to determine the electronic contribution to the perpendicular interface anisotropy in Co-based multilayers. Using in situ Kerr effect measurements, the influences of different transition metals (TM = Ag, Au, Cu, and Pd) on the magnetic properties of single-crystal Co films grown on Pd (111) and Au (111) surfaces are investigated. Last quarter the discovery of a large peak in the perpendicular anisotropy when approximately one monolayer of Cu or Ag is deposited on the Co surface was reported. We now have added a computer-controlled stepper-motor drive to our MBE sample transfer mechanism. The motor allows us to move the sample at a constant velocity from behind a shutter during deposition. The film, therefore, is deposited as a wedge with a linear variation of thickness across the substrate. In this way, a continuous range of coverage on a single sample is studied. The stepper motor also provides the necessary control for precisely positioning the sample in the laser beam for Kerr effect measurements at the different coverages.
Observations of flux motion in niobium films
A magnetic field trapped in a superconducting sphere was examined at temperatures from 4.6 K to 5.5 K. The sphere was the rotor of a precision gyroscope and was made of fused quartz and coated with a sputtered niobium film. The rotor diameter was 3.8 cm. The film thickness was 2.5 microns. The tests were carried out at an ambient magnetic field of about 1 mG. Unexpected instability of the trapped field was observed. The experimental results and possible explanations are presented.
Spin-flop coupling at La 0.5 Sr 0.5 FeO 3 /La 0.7 Sr 0.3 MnO 3 interfaces
Antiferromagnetic (AFM) spintronics offer several benefits compared to their ferromagnetic (FM) counterparts, such as high storage capacity and faster processing speed, however, difficulties in manipulating and detecting the AFM moments impede their implementation. Spin-flop coupling, the interfacial perpendicular coupling between FM and AFM moments, can be utilized to control the orientation of AFM moments with the application of moderate magnetic fields on the scale of tenths of a Tesla. Here, in this work, epitaxial bilayers of AFM La 0.5 Sr 0.5 FeO 3 (LSFO)/FM La 0.7 Sr 0.3 MnO 3 (LSMO) with fixed LSMO thickness (~85 u.c.) and LSFO thicknesses varying from 10 to 50 u.c. were investigated to determine the effect of Sr doping and La 1-x Sr x FeO 3 magnetocrystalline anisotropy on the strength of spin-flop coupling. X-ray magnetic linear dichroism demonstrated that the spin-flop coupling strength decreased with increasing LSFO layer thickness, persisting at a thickness of 50 u.c. (~20 nm). Furthermore, photoemission electron microscopy revealed a domain-by-domain correlation between the FM and AFM domains consistent with the perpendicular orientation dictated by spin-flop coupling. These results demonstrate that LSFO/LSMO bilayers have the potential to serve as a model materials system for AFM spin transport measurements.
Phase transition of thin-film superconducting cylinders in a magnetic field. I
Superconducting phase transition temperature measurements as function of magnetic field in thin film hollow Al and In cylinders