Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Lucy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

A Tutorial on the Control of Floating Offshore Wind Turbines: Stability Challenges and Opportunities for Power Capture

Climate change is a serious threat facing humanity. The United States (U.S.) and many other countries are increasing the amount of electrical power generated from renewable energy sources in an effort to combat climate change and ensure energy independence. The U.S. has set goals to achieve a 100% decarbonized electric grid by 2035 and a net-zero emissions economy by no later than 2050. Renewable energy currently accounts for about 20% of the U.S. power grid. According to the U.S. Department of Energy and the National Renewable Energy Laboratory (NREL), in the U.S. in 2021, wind and solar photovoltaic generation supplied 9.1% and 4% of total electricity generation, respectively, and the latest publicly available data show that hydropower represented 6.6% of all electricity generated in the U.S. in 2019. As wind farms have been built in many of the best wind resource areas on land, the U.S. and many other countries are turning to offshore wind for further growth of wind power capacity. Further, the U.S. has committed to deploy 30 GW of offshore wind by 2030, a significant increase from the 0.04 GW of installed offshore wind in the country as of the end of 2023. Many other countries have also established ambitious goals or plans to increase the amount of installed offshore wind power.

17 WIND ENERGY↗

Status and Challenges in the MQXFB Nb 3 Sn Quadrupoles for the HL-LHC

The inner triplet (or low-β) quadrupole magnets are among the components to be upgraded in LHC interaction regions for the HL-LHC project. The new quadrupole magnets, called MQXF, are based on Nb 3 Sn superconducting magnet technology, with a conductor peak field of 11.3 T. CERN is in charge of the fabrication of the MQXFB variant, the longest Nb 3 Sn accelerator magnets designed and manufactured up to now, with a magnetic length of 7.2 m. Two magnets, MQXFBP3 and MQXFB02, reached the HL-LHC project requirements. However, they still exhibited a limitation at 4.5 K with a phenomenology similar to the one observed on the first two prototypes. After improvements on the cold mass (longitudinal welding) and magnet assembly (elimination of overstress on the conductor during loading) procedures, a series of modifications were implemented in MQXFB03 at the level of the coil fabrication to address and/or reduce weaknesses in the coils. The magnet was tested and was the first to achieve performance requirements at both 1.9 K and 4.5 K, with no signs of conductor limitation at 4.5 K. MQXFB is now in the series production phase, with around 2/3 of the coils completed and half of the magnets assembled. We provide in this paper an overview of the MQXFB program, with a summary of the main recent achievements and an overall status of the fabrication.

43 PARTICLE ACCELERATORS↗

Stochastic Model Predictive Control With Gaussian Wind Direction Preview for Wake Steering

This article addresses the problem of wake steering control for wind farms that explicitly consider the tradeoff between farm-level power generation and yaw duty cycle under variable and uncertain wind conditions. A novel stochastic model predictive control (MPC) algorithm is presented, which utilizes a stochastic model of the freestream wind field components in a receding horizon framework to compute optimal yaw set points that maximize the expected value of the farm power while constraining the yaw actuation. Different configurations of the algorithm are evaluated using a steady-state wind farm simulator. The proposed stochastic MPC algorithm can plan control actions over a future prediction horizon based on probabilistic estimates of the incoming wind magnitude and direction.

17 WIND ENERGY↗

Elongation Factor Tu Acts as a Chaperone to Activate an Antibacterial RNase Toxin

Many Gram-negative bacterial species use contact-dependent growth inhibition (CDI) systems to deliver toxic proteins into neighboring competitors. CDI + strains deploy CdiA effector proteins, which translocate their C-terminal toxin (CT) domains into target bacteria through a receptor-mediated delivery pathway. To protect against auto-intoxication, CDI + bacteria also produce CdiI immunity proteins that neutralize CT toxin activity. Here, we present the crystal structure of the CT·CdiI O32:H37 complex from Escherichia coli O32:H37. CT O32:H37 adopts the same fold as the tRNase domain of colicin D, and the nucleases share similar catalytic centers. However, unlike colicin D, which cleaves the anticodon loops of tRNA Arg isoacceptors, CT O32:H37 exhibits nonspecific RNase activity. Notably, we find that endogenous elongation factor Tu (EF-Tu) co-purifies with the over-produced CT·CdiI O32:H37 complex. Although EF-Tu does not bind stably to CT O32:H37 in the absence of CdiI O32:H37 , the translation factor is required for toxic RNase activity in vitro. AlphaFold 3 modeling and site-directed mutagenesis indicate that CT O32:H37 interacts with the N-terminal GTPase domain of EF-Tu. EF-Tu appears to stabilize residue Trp52 within the hydrophobic core of the toxin, which in turn supports the RNase active site through an unusual hydrogen-bonding interaction with the catalytic His67 residue. Furthermore, EF-Tu is hijacked as an essential co-factor to organize the toxin's catalytic center.

Nhan, Dinh Quan [University of California, Santa B↗

Plant‐produced SARS ‐ CoV ‐2 antibody engineered towards enhanced potency and in vivo efficacy

Summary Prevention of severe COVID‐19 disease by SARS‐CoV‐2 in high‐risk patients, such as immuno‐compromised individuals, can be achieved by administration of antibody prophylaxis, but producing antibodies can be costly. Plant expression platforms allow substantial lower production costs compared to traditional bio‐manufacturing platforms depending on mammalian cells in bioreactors. In this study, we describe the expression, production and purification of the originally human COVA2‐15 antibody in plants. Our plant‐produced mAbs demonstrated comparable neutralizing activity with COVA2‐15 produced in mammalian cells. Furthermore, they exhibited similar capacity to prevent SARS‐CoV‐2 infection in a hamster model. To further enhance these biosimilars, we performed three glyco‐ and protein engineering techniques. First, to increase antibody half‐life, we introduced YTE‐mutation in the Fc tail; second, optimization ofN‐linked glycosylation by the addition of a C‐terminal ER‐retention motif (HDEL), and finally; production of mAb in plant production lines lacking β‐1,2‐xylosyltransferase and α‐1,3‐fucosyltransferase activities (FX‐KO). These engineered biosimilars exhibited optimized glycosylation, enhanced phagocytosis and NK cell activation capacity compared to conventional plant‐produced S15 and M15 biosimilars, in some cases outperforming mammalian cell produced COVA2‐15. These engineered antibodies hold great potential for enhancingin vivoefficacy of mAb treatment against COVID‐19 and provide a platform for the development of antibodies against other emerging viruses in a cost‐effective manner.

Biotechnology & Applied Microbiology↗

BBO-10203 inhibits tumor growth without inducing hyperglycemia by blocking RAS-PI3Kα interaction

BBO-10203 is an orally available drug that covalently and specifically binds to the rat sarcoma (RAS)–binding domain of phosphoinositide 3-kinase α (PI3Kα), preventing its activation by HRAS, NRAS, and KRAS. Here, it inhibited PI3Kα activation in tumors with oncogenic mutations in KRAS or PIK3CA and in tumors with human epidermal growth factor receptor 2 (HER2) amplification or overexpression. In preclinical models, BBO-10203 caused significant tumor growth inhibition across multiple tumor types and showed enhanced efficacy in combination with inhibitors of cyclin-dependent kinase 4/6 (CDK4/6), estrogen receptor (ER), HER2, and KRAS-G12C mutant, including in tumors harboring mutations in Kelch-like ECH-associated protein 1 (KEAP1) and serine/threonine kinase 11 (STK11). Notably, these antitumor effects occurred without inducing hyperglycemia, because insulin signaling does not depend on RAS-mediated PI3Kα activation to promote glucose uptake.

Simanshu, Dhirendra K. [Frederick National Laborat↗

Thermal acclimation of stem respiration implies a weaker carbon-climate feedback

The efflux of carbon dioxide (CO2) from woody stems, a proxy for stem respiration, is a critical carbon flux from ecosystems to the atmosphere, which increases with temperature on short timescales. However, plants acclimate their respiratory response to temperature on longer timescales, potentially weakening the carbon-climate feedback. The magnitude of this acclimation is uncertain despite its importance for predicting future climate change. We develop an optimality-based theory dynamically linking stem respiration with leaf water supply to predict its thermal acclimation. We show that the theory accurately reproduces observations of spatial and seasonal change. We estimate the global value for current annual stem CO2 efflux as 27.4 ± 5.9 PgC. By 2100, incorporating thermal acclimation reduces projected stem respiration without considering acclimation by 24 to 46%, thus reducing land ecosystem carbon emissions.

Zhang, Han↗

Thermal images collected during large-scale 3D printing with Ingersoll MasterPrint

This data set contains images produced to test the performance of anomaly and fault detection methods in the context of additive manufacturing. Two print jobs were executed using the Ingersoll MasterPrint with the Model 30 Strangpresse extruder. The material used was Techmer compounded polylactic acid (PLA) with wood flour as a filler (80/20 PLA/WF by weight). The first print job consists of the 3D printing of a hexagonal cylinder with a two-bead wall. This print was sliced at a gantry velocity of 3000 millimeter per minute, and an extruder screw speed of 68.14 rotations per minute. This are considered the normal operating conditions. A second hexagonal cylinder was printed using a reduced extruder screw speed, 15% lower than under normal operating conditions. The images were collected with a Teledyne FLIR Lepton 3.5 infra-red camera, a small form factor radiometric long-wave infrared camera with a spectral range of 8 µm to 14 µm. Sensor resolution was 160x120 pixels, with a pixel size of 12 µm, a temperature range of -10 - 450°C, and an accuracy of +/- 10°C in its low gain configuration. Images in this data set were collected with cameras oriented at the printer nozzle. The nozzle camera setup consisted of two cameras located 12.5cm from the nozzle center. These were mounted directly to the print head, so that the camera positions relative to the print direction would remain constant as it rotated around its C-axis to follow the print path. One camera was placed ahead of the nozzle to capture the previous layer immediately before being covered by the new layer of material, while the second camera was placed behind the nozzle and captured the freshly extruded bead. Images are collecting during each phase of the print: (a) idle (i.e., no material deposited), (b) extrusion (i.e., to prime the extruder), and (c) printing (deposition of material to manufacture the hexagonal cylinder).

36 MATERIALS SCIENCE↗

Non-contact imaging of terahertz surface currents with aperture-type near-field microscopy

Terahertz (THz) near-field imaging and spectroscopy provide valuable insights into the fundamental physical processes occurring in THz resonators and metasurfaces on the subwavelength scale. However, so far, the mapping of THz surface currents has remained outside the scope of THz near-field techniques. In this study, we demonstrate that aperture-type scanning near-field microscopy enables non-contact imaging of THz surface currents in subwavelength resonators. Through extensive near-field mapping of an asymmetric D-split-ring THz resonator and full electromagnetic simulations of the resonator and the probe, we demonstrate the correlation between the measured near-field images and the THz surface currents. The observed current dynamics in the interval of several picoseconds reveal the interplay between several excited modes, including dark modes, whereas broadband THz near-field spectroscopy analysis enables the characterization of electromagnetic resonances defined by the resonator geometry.

Norman, Sarah↗

Observations of marine animal interactions with a small tidal turbine

The risk of collisions between animals and operating tidal turbines remains a concern in the scientific and regulatory communities. A sensor package including optical cameras was deployed to monitor animal interactions with a small-scale (1 m 2 ) cross-flow tidal turbine. The turbine was deployed in Washington State, USA for 141 days at a site with peak flow speeds of 2.5 m/s. We analyze optical camera imagery spanning 109 days of turbine operation. The analyzed images contain 1044 observations of fish, fish schools, seabirds, or seals in the vicinity of the turbine. No instances of collision with seabirds or seals were observed. Seabirds were only observed during daylight hours and while the turbine was stationary. Both seals and fish were observed during both day and night and while the turbine was stationary and rotating. Four fish were observed colliding with the moving turbine and in all but one case the animals swam away following the collision. Over the same period of time, over fifty times more fish (224 individual fish and 5 fish schools) were observed passing the moving turbine without collision. Fish encounters were likely under counted due to the difficulty in discerning small fish from plant matter in the water column. These observations represent the first optical camera imagery showing fish, bird, and marine mammal interactions with a tidal turbine in North America. In addition to quantitative and qualitative discussion of the implications of our observations for collision risk, we discuss lessons learned on sampling schemes and deployment of machine learning for detection of animals to inform future data collection strategies in future monitoring campaigns.

16 TIDAL AND WAVE POWER↗

Data for Machado-Silva et al. (2024), "Short-Term Groundwater Level Fluctuations Drive Subsurface Redox Variability"

This dataset contains the analytical data reported in Machado-Silva et al. (2024) as part of the COMPASS-FME project, which seeks to advance a scalable, predictive understanding of the fundamental biogeochemical processes, ecological structure, and ecosystem dynamics that distinguish coastal terrestrial-aquatic interfaces from the purely terrestrial or aquatic systems to which they are coupled. The dataset consists of water quality parameters as well as redox potential, water content, and electrical conductivity. These data were collected in 2022 in Crane Creek (CRC), Portage River (PTR), and Old Woman Creek (OWC). Each of these sites included uplands (UP), transitions (TR), wetland-transition edge (WTE), and wetland (W) zones. The sites represent replicates of the Lake Erie terrestrial-aquatic interface under fluctuating water levels and are located in well-preserved areas with natural or restored marsh and forest cover.This dataset consists of a single data file (Machado_Silva_et_al_2024_EST_data.csv) that is in comma-separated value (CSV) format. No special software is required to read it.This dataset uses the ESS-DIVE Hydrologic Monitoring Reporting Format 1.0.

54 ENVIRONMENTAL SCIENCES↗

Data for Stetten et al. (2025), "Biogeochemical controls on iron speciation and cycling across upland to shoreline gradients in freshwater and estuarine coastal soils (Lake Erie and Chesapeake Bay, United States)"

Coastal environments are dynamic interfaces that mediate carbon and nutrient exchanges between terrestrial landscapes and open waters, but it is unclear how biogeochemical reactions, in particular iron (Fe) redox transformations, affect the understanding and prediction of coastal ecosystem functions. This dataset includes measurements from two freshwater sites in the Western and Central basins of Lake Erie (Ohio, United States) and two estuarine sites in the Chesapeake Bay (Maryland, United States); the analytical results were reported by Stetten et al. (2025) in Science of the Total Environment. It was produced as part of the COMPASS-FME project, which seeks to advance a scalable, predictive understanding of the fundamental biogeochemical processes, ecological structure, and ecosystem dynamics that distinguish coastal terrestrial-aquatic interfaces from the purely terrestrial or aquatic systems to which they are coupled. The sites were sampled in November 2022 (CRC), December 2022 (MSM), February 2023 (GCW), and March 2023 (OWC); site codes follow those used by Pennington et al. (2025).The dataset consists of the following soil data:- Solid data (Fe concentration, etc.)- Porewater data (sulfate, sulfide, etc.)- Linear combination fitting results of X-ray absorption near edge structure (XANES) spectra; i.e., quantitative results of the oxidation state of Fe, indicated as a proportion of pure Fe(III) and Fe(II) model compounds- Linear combination fitting results of EXAFS (extended X-ray absorption fine structure) spectra, indicated as proportion of of Fe-model compounds (illite, smectite, etc.)Each data type has a single file in comma-separated value (CSV) format. No special software is required to read it.

54 ENVIRONMENTAL SCIENCES↗

Array-Based Seismic Measurements of OSIRIS-REx’s Re-Entry

The return home of the OSIRIS-REx spacecraft in September 2023 marked only the fifth time that an artificial object entered the Earth’s atmosphere at interplanetary velocities. Although rare, such events serve as valuable analogs for natural meteoroid re-entries; enabling study of hypersonic dynamics, shock wave generation, and acoustic-to-seismic coupling. Here, in this study, we report on the signatures recorded by a dense (100 m scale) 11-station array located almost directly underneath the capsule’s point of peak atmospheric heating in northern Nevada. Seismic data are presented, which allow inferences to be made about the shape of the shock wave’s footprint on the surface, the capsule’s trajectory, and its flight parameters.

58 GEOSCIENCES↗

NEWTS Integrated Dataset (version 1.0)

The National Energy Water Treatment and Speciation (NEWTS) Integrated Dataset v1.0 provides water researchers, community leaders, and regulators with a unified and standardized energy-related wastewater stream database. This resource is derived from 27 state and federal entities, and scientific publications, and contains more than 400,000 sample records, many of which also provide geospatial information. The dataset includes data for several different energy-related wastewater types including produced water, other oil and gas wastewaters, mine drainage, coal ash leachate, and power plant wastewater. The NEWTS Integrated Dataset was built to support environmentally prudent decision-making, explore treatment opportunities, and identify potential critical mineral sources. A subset of this novel resource is also featured on NETL NEWTS State-Level Database Dashboard. Additional data can be found in the NEWTS EDX Group and the NEWTS Federal Database Dashboard.

abandoned mine drainage↗

NEWTS State-Level Database Dashboard

The National Energy Water Treatment and Speciation (NEWTS) State-Level Database Dashboard enables quick visualization and exploration of energy-related wastewater data collected from state environmental agencies and research projects across the United States. The dashboard features a subset of the NEWTS Integrated Dataset (version 1.0), which was built to provide stakeholders with a unified and standardized database to support wastewater treatment and critical minerals exploration. The full NEWTS Integrated Dataset and citations for the original data resources can be found here: https://edx.netl.doe.gov/dataset/newts-integrated-dataset-version-1-0

abandoned mine drainage↗

Advanced Infrastructure Integrity Modeling (AIIM) Onshore Pipeline Database

The Advanced Infrastructure Integrity Modeling (AIIM) Onshore Pipeline Database is an interoperable spatial resource containing critical environmental, operational, and reported stressors tied to publicly available oil and gas pipeline locations across the contiguous U.S. and Alaska. This database contains two layers: 1. Pipeline point locations (‘pipeline_points’) – More than 500,000 points (at every kilometer along pipelines, and end points) to which more than 350 stress-related variables have been appended. 2. Merged pipelines (‘merged_pipelines’) – The original, publicly available pipeline data (see table below) merged together into one feature class.

Carbon Transport↗

WELLS Interactive Application

The Wellbore Exploration and Location Logistic System (WELLS) Interactive Application is an interactive tool to enable easy exploration and visualization of the living national wellbore database (WELLS Database (https://edx.netl.doe.gov/dataset/wells_database)). The tool and underlying database were created and are maintained by the National Energy Technology Laboratory (NETL), providing visualization of the more than six million public wellbore records from more than 65 authoritative state, federal, and tribal resources. The WELLS Interactive Application serves up wellbore data from oil, gas, underground injection, research, geothermal, geotechnical, groundwater, and other types of wells in a single, standardized, unified system. In addition to the surface location of these wells, the underlying database combines select key attributes for features such as well age, depth, and operating status. The system also provides users with references back to the original sources used in this unified platform. The underlying data can be accessed through the WELLS Database: https://edx.netl.doe.gov/dataset/wells_database Additional Information: The WELLS Interactive Application (formerly titled CO2-Locate) enables visualization and access to the public wellbore records through an intuitive web-based mapping tool. The WELLS Interactive Application was designed to help users visualize, query, analyze, and download wellbore records. Public wellbore points are included as a layer in the Map page, called Public Wells. Additionally, a multivariate hexagon grid summarizing well density from proprietary well data, called Well Density, is included to identify data gaps between the public and proprietary well data. Filtering functionalities in the tool allow these two layers to be spatially filtered by state, county, or basin as well as by status, type, true vertical depth, and spud year. The WELLS Interactive Application also contains a Near Me tool can be used to search and explore wellbore data within a user-defined distance of a specified location on the map, which can also be downloaded. The Query tool allows users to query the selected or filtered wells in the Public Wells layer and export the data. For additional information on these tool functionalities, see the help documentation on the About page of the tool. Notes for Consideration: The Well Density layer provided in this application is derived from proprietary wellbore data, the records of which do not always contain values for key features (status, type, true vertical depth, or spud year). Therefore, data might not be available when layers are queried for all filter combinations. Additionally, visualizing layers and applying filters may take additional time to load (i.e., draw on the map) due to the large size of the data.

ccs↗

Smart CO2 Transport-Route Planning Tool

NETL has developed the Smart CO2 Transport-Route Planning Tool to help inform energy transport planning and development. The stand-alone, open-source tool applies data-driven, geospatial and machine-learning informed logic to identify potential routes or evaluate existing corridors based on current legislation, best construction practices, and more. Underpinning the interactive tool, is NETL’s CO2 Transport Planning Database (https://edx.netl.doe.gov/dataset/ccs-pipeline-route-planning-database-v1). This geospatial resource contains more than 70 gigabytes of data representing more than 60 critical factors for the spatial routing of CO2 transport, including land use requirements, existing infrastructure, high consequence areas, and natural hazards.

Bipartisan Infrastructure Law↗