Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Low Resolution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

NANT Site - Radar Wind Profiler / Derived Data Reformatted

A radar wind profiler measures the Doppler shift of electromagnetic energy scattered back from atmospheric turbulence and hydrometeors along 3-5 vertical and off-vertical point beam directions. Back-scattered signal strength and radial-component velocities are remotely sensed along all beam directions and combined to derive the horizontal wind field over the radar. These data are typically sampled and averaged hourly or sub-hourly (15-min) and usually have 60-m and/or 100-m vertical resolutions up to 4 km for the 915 MHz system. Both a high-resolution, lower height coverage mode and a low-resolution, higher height coverage mode are used to collect the data.

17 WIND ENERGY↗

Discretization limits of lattice‐Boltzmann methods for studying immiscible two‐phase flow in porous media

Summary Digital images of porous media often include features approaching the image resolution length scale. The behavior of numerical methods at low resolution is therefore important even for well‐resolved systems. We study the behavior of the Shan‐Chen (SC) and Rothman‐Keller (RK) multicomponent lattice‐Boltzmann models in situations where the fluid‐fluid interfacial radius of curvature and/or the feature size of the medium approaches the discrete unit size of the computational grid. Various simple, small‐scale test geometries are considered, and a drainage test is also performed in a Bentheimer sandstone sample. We find that both RK and SC models show very high ultimate limits: in ideal conditions the models can simulate static fluid configuration with acceptable accuracy in tubes as small as three lattice units across for RK model (six lattice units for SC model) and with an interfacial radius of curvature of two lattice units for RK and SC models. However, the stability of the models is affected when operating in these extreme discrete limits: in certain circumstances the models exhibit behaviors ranging from loss of accuracy to numerical instability. We discuss the circumstances where these behaviors occur and the ramifications for larger‐scale fluid displacement simulations in porous media, along with strategies to mitigate the most severe effects. Overall we find that the RK model, with modern enhancements, exhibits fewer instabilities and is more suitable for systems of low fluid‐fluid miscibility. The shortcomings of the SC model seem to arise predominantly from the high, strongly pressure‐dependent miscibility of the two fluid components.

Li, Zhe↗

Multiplex Detection of Multiple-Quantum/Single-Quantum NMR Correlation Spectra

High-ordered multiple-quantum coherences have been used to gauge the size of coupled networks of nuclear spins but are seldom used in modern high-resolution solid-state NMR spectroscopy due to the low resolution of earlier techniques. Herein, we extend this work to the third dimension by designing an MQ spin counting experiment with full chemical resolution of the nuclei involved in the coherences. The technique uses multiplex processing to simultaneously acquire MQ/1Q correlation 2D spectra, with all even-ordered values of M, in the same amount of time it would take to acquire the 2Q/1Q spectrum alone. Further, we apply this multiplexed MQ/1Q correlation method to probe site clustering on functionalized silica surfaces and find the first evidence of clusters involving three or more functionalities. When applied to a supported zirconium metallocene, the observation of a 6Q coherence between six cyclopentadienyl proton nuclei confirms the colocation of two cyclopentadienyl ligands on a single metal center.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Short-range correlation physics at low renormalization group resolution

Recent experiments have succeeded in isolating processes for which short-range correlation (SRC) physics is dominant and well accounted for by SRC phenomenology. But an alternative and compelling picture emerges from renormalization group (RG) evolution to low RG resolution. At high RG resolution, SRCs are identified as components in the nuclear wave function with relative pair momenta greater than the Fermi momentum. Scale separation results in wave-function factorization that can be exploited with phenomenologies such as the generalized contact formalism or the low-order correlation operator approximation. Evolution to lower resolution shifts SRC physics from nuclear structure to the reaction operators without changing the measured observables. We show how the features of SRC phenomenology manifested at high RG resolution are cleanly identified at low RG resolution using simple two-body operators and local-density approximations with uncorrelated wave functions, all of which can be systematically generalized. We verify that the experimental consequences to date follow directly at low resolution from well-established properties of nucleon-nucleon interactions such as the tensor force. Thus the RG reconciles the contrasting pictures of the same experiment and shows how to get correct results using wave functions without SRC components. Finally, our demonstration has implications for the analysis of knockout reactions for which SRC physics is not cleanly isolated.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DiffLense: a conditional diffusion model for super-resolution of gravitational lensing data

Abstract Gravitational lensing data is frequently collected at low resolution due to instrumental limitations and observing conditions. Machine learning-based super-resolution techniques offer a method to enhance the resolution of these images, enabling more precise measurements of lensing effects and a better understanding of the matter distribution in the lensing system. This enhancement can significantly improve our knowledge of the distribution of mass within the lensing galaxy and its environment, as well as the properties of the background source being lensed. Traditional super-resolution techniques typically learn a mapping function from lower-resolution to higher-resolution samples. However, these methods are often constrained by their dependence on optimizing a fixed distance function, which can result in the loss of intricate details crucial for astrophysical analysis. In this work, we introduce DiffLense , a novel super-resolution pipeline based on a conditional diffusion model specifically designed to enhance the resolution of gravitational lensing images obtained from the Hyper Suprime-Cam Subaru Strategic Program (HSC-SSP). Our approach adopts a generative model, leveraging the detailed structural information present in Hubble space telescope (HST) counterparts. The diffusion model, trained to generate HST data, is conditioned on HSC data pre-processed with denoising techniques and thresholding to significantly reduce noise and background interference. This process leads to a more distinct and less overlapping conditional distribution during the model’s training phase. We demonstrate that DiffLense outperforms existing state-of-the-art single-image super-resolution techniques, particularly in retaining the fine details necessary for astrophysical analyses.

Computer Science↗

Generating high-resolution total canopy SIF emission from TROPOMI data: Algorithm and application

Solar-induced chlorophyll fluorescence (SIF) is a rapidly advancing front in modeling global terrestrial gross primary production (GPP). Canopy total SIF emissions (SIF total ) are mechanistically linked to the plant photosynthesis, and can be estimated from satellite observed SIF (SIF obs ) through radiative transfer modeling. However, the current satellite SIF obs and thus SIF total are available only at coarse spatial resolutions from several kilometers to tens of kilometers, inhibiting the application at fine spatial scales. Here, in this work, we proposed an algorithm to generate both global high-resolution SIF total (HSIF total ) and high-resolution SIF obs (HSIF obs ) at 1 km from low-resolution SIF obs (LSIF obs ) from the TROPOspheric Monitoring Instrument (TROPOMI), which has a spatial resolution at nadir of 3.5 km by 5.6–7 km. Our statistical method is based on the law of energy conservation and uses satellite derived fraction of absorbed photosynthetically active radiation, fluorescence efficiency, and the escape probability of fluorescence. We evaluated the accuracy of our HSIF total using the Orbiting Carbon Observatory-2 SIF (R 2 = 0.78). We found that the spatial resolution had clear effects on the relationship between HSIF total and GPP. We also compared HSIF total to 8-day averaged tower GPP from 135 flux sites and found that they were better correlated when HSIF total was averaged over a 1-km radius around the tower than when averaged over a larger radius. Our study provided a unique high-resolution HSIF total product, which will advance the estimation of GPP by extrapolating site-level relationships to the global scale.

54 ENVIRONMENTAL SCIENCES↗

More Frequent and Persistent Heatwaves Due To Increased Temperature Skewness Projected by a High‐Resolution Earth System Model

Abstract Heatwaves are strongly associated with temperature distributions, but the mechanisms by which distributions are influenced by climate change remains unclear. Comparing simulations from a high‐spatial resolution Community Earth System Model (CESM‐HR) with those from low‐resolution models, we identify substantial improvements by CESM‐HR in reproducing observed Northern Hemisphere summer temperature skewness, as well as the frequency, intensity, persistence, and total heatwave days. Temperature skewness is strongly linked to land‐atmosphere interactions and atmospheric circulation. Under global warming projections, some regions exhibit enhanced temperature skewness, along with more frequent and persistent heatwaves of greater intensity. We find that in energy‐limited regimes, such as India, negative skewness in latent heat flux facilitates large positive skewness in sensible heat flux, which modulates near‐surface air temperatures. Skewness differences of latent and sensible heat fluxes are amplified under global warming, increasing the temperature skewness. We find that this contrasting flux mechanism is active in several heatwave‐prone regions.

Gao, Yang↗

Improving to the neutron fluence rate monitor measurement system at the Advanced Test Reactor [Poster]

The existing fluence monitor wire scanning system at the Advanced Test Reactor (ATR) was designed and installed for use in the Engineering Test Reactor (ETR) when it began operation in 1958. The wire scanner was operated in ETR for over 20 years until ATR began operation, when it was moved to the ATR west canal area in 1971 and subsequently moved to the west canal in 2006 where it presently resides. With a continued service life of 65 years the system is well beyond the typical design life of 20 years for these types of systems. The need to update the data acquisition and control system was identified, and the benefits of replacing the existing sodium iodide (NaI) detector with an electronically cooled high-purity germanium (HPGe) detector are discussed. The wirescanner system in the ATR canal is utilized after every reactor cycle by the ATR Radiation Measurements Laboratory (RML) to assess the activation of cobalt and nickel dosimeter wires during the cycle. These wires become activated through exposure to thermal and fast neutrons respectively during the irradiation cycle and are highly radioactive upon shutdown. It is for this reason that the wirescanner is used in the ATR canal rather than transporting the dosimeters to another facility. A scoping study was performed to develop a base-line design to ensure that existing capabilities could be replaced with a new system. The new hardware will enable automated measuring of several flux monitor holders without necessitating the removal of the flux wires. In this way, flux wire measurements will be performed with minimal dose to the technicians and will not be limited by canal operations as is presently the case. The new control and acquisition software will be based on commercially available and supported systems that have a wide user-base to provide long-term stability. An electronically cooled HPGe detector will be used to provide high-resolution gamma-ray measurements, an improvement from the low-resolution sodium-iodide detector that is presently deployed. The electronic cooler eliminates the need for liquid nitrogen to cool the detector head. A new collimator has been designed to house the new detector and allow for sufficient counting rates.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Super Resolving Unrolled Neural Networks for Remote Sensing

In remote sensing systems, the capabilities of the system are constrained by the complex interactions between size, weight, and power (SWAP) of potential designs. In electro-optical (EO) systems, examples of these critical parameters include the system’s sensitivity and resolution. Those parameters can be increased by ever larger optical apertures and focal planes but at the cost of more SWAP. Multi-image super resolution (MISR) techniques allow resolution to be enhanced via computation rather than more sophisticated optical hardware. These algorithms combine multiple images together into a single, higher resolution image, trading temporal resolution and computation for spatial resolution. Fielded MISR techniques, such as Drizzle, can require several hundred images to create a single super resolved image, implying reduced temporal resolution, increased data acquisition load, and limiting mission applications. Iterative techniques, such as model-based image reconstruction and compressive sensing, have been shown to create super resolved images using fewer images than Drizzle. They do this by posing an optimization problem that balances accuracy between a highly accurate physical model and an image model. In the case of super resolution, the physical model is defined by the relation between low resolution input images and the desired high resolution output image. The image model encodes some assumptions about the super resolved image. These assumptions are meant to suppress reconstruction artifacts that arise due to deterministic physical model error, stochastic measurement noise, and potential undersampling. In practice, the performance of iterative methods are limited by imaging models compatible with optimization. Deep learning-based methods can effectively learn image models of arbitrary complexity, but lack the theoretical explainability and robustness of iterative techniques. Consensus equilibrium (CE) generalizes the iterative techniques beyond optimization, enabling blackbox algorithms such as traditional and neural image denoisers to be used as the image model. CE-based approaches retain much of the explainability and robustness of iterative techniques while allowing the expressiveness of machine learning image models to be used. Additionally, by unrolling iterations of CE with an embedded image denoiser, the image denoiser can be further trained and specialized to the specific application with potentially higher quality reconstructions. Under this project, we demonstrated the feasibility of training an unrolled neural network based upon CE. While we didn’t train one, we showed that the CE process is differentiable and its gradient can be tractably computed. We also explored the usage of a variants of CE akin to generative neural works. Most importantly, we applied the CE framework to a number of problems including non-blind deconvolution, upsampling, single-image super resolution, MISR, event-based sensing, and saturated deconvolution. Our MISR prototype creates high quality reconstructions with an order of magnitude fewer images than previous approaches and, critically, produces these reconstructions fast enough for practical usage.

47 OTHER INSTRUMENTATION↗

Quasi-deuteron model at low renormalization group resolution

The quasi-deuteron model introduced by Levinger is used to explain cross sections for knocking out high-momentum protons in photoabsorption on nuclei. This is within a framework we characterize as exhibiting high renormalization group (RG) resolution. Assuming a one-body reaction operator, the nuclear wave function must include two-body short-range correlations (SRCs) with deuteronlike quantum numbers. In Phys. Rev. C 104, 034311 (2021), we showed that SRC physics can be naturally accounted for at low RG resolution. We describe the quasi-deuteron model at low RG resolution and determine the Levinger constant, which is proportional to the ratio of nuclear photoabsorption to that for photodisintegration of a deuteron. We extract the Levinger constant based on the ratio of momentum distributions at high relative momentum. We compute momentum distributions evolved under similarity RG (SRG) transformations where the SRC physics is shifted into the operator as a universal two-body term. The short-range nature of this operator motivates using local-density approximations with uncorrelated wave functions in evaluating nuclear matrix elements, which greatly simplifies the analysis. The operator must be consistently matched to the RG scale and scheme of the interaction for a reliable extraction. We apply SRG transformations to different nucleon-nucleon (NN) interactions and use the deuteron wave functions and Weinberg eigenvalues to determine approximate matching scales. We predict the Levinger constant for several NN interactions and a wide range of nuclei comparing to experimental extractions. The predictions at low RG resolution are in good agreement with experiment when starting with a hard NN interaction and the initial operator. Similar agreement is found using soft NN interactions when the additional two-body operator induced by evolution from hard to soft is included.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

ENSO Diversity and the Simulation of Its Teleconnections to Winter Precipitation Extremes Over the US in High Resolution Earth System Models

Abstract Accounting for the diversity in El Niño Southern Oscillation (ENSO)'s spatial pattern, with the novel ENSO longitudinal index (ELI), we evaluate the simulation of its teleconnections to US winter precipitation extremes by seven global high‐resolution (HR) Earth System Models (ESM). Six (four) HR ESMs simulate the observed increase in precipitation extremes over Southwest US (Southeast US) during ELI‐defined El Niño events better than their low‐resolution counterparts, which are low‐biased. The stronger ENSO‐dependence over the Southwest US and Southeast US in those models is associated with an improved simulation of moisture flux into the regions and/or storm track activity there. HR ESMs, however, generally overestimate the increase in precipitation extremes over the Pacific‐Northwest during La Niña events. Model bias there is associated with bias in moisture transport into the region during La Niña events, which is amplified by the enhanced vertical mass fluxes in HR.

54 ENVIRONMENTAL SCIENCES↗

Predictability of the early summer surface air temperature over Western South Asia

Variability of the Surface Air Temperature (SAT) over the Western South Asia (WSA) region leads to frequent heatwaves during the early summer (May-June) season. The present study uses the European Centre for Medium-Range Weather Forecast’s fifth-generation seasonal prediction system, SEAS5, from 1981 to 2022 based on April initial conditions (1-month lead) to assess the SAT predictability during early summer season. The goal is to evaluate the SEAS5’s ability to predict the El Niño-Southern Oscillation (ENSO) related interannual variability and predictability of the SAT over WSA, which is mediated through upper-level (200-hPa) geopotential height anomalies. This teleconnection leads to anomalously warm surface conditions over the region during the negative ENSO phase, as observed in the reanalysis and SEAS5. We evaluate SEAS5 prediction skill against two observations and three reanalyses datasets. The SEAS5 SAT prediction skill is higher with high spatial resolution observations and reanalysis datasets compared to the ones with low-resolution. Overall, SEAS5 shows reasonable skill in predicting SAT and its variability over the WSA region. Moreover, the predictability of SAT during La Niña is comparable to El Niño years over the WSA region.

54 ENVIRONMENTAL SCIENCES↗

Using angular two-point correlations to self-calibrate the photometric redshift distributions of DECaLS DR9

Calibrating the redshift distributions of photometric galaxy samples is essential in weak lensing studies. The self-calibration method combines angular auto- and cross-correlations between galaxies in multiple photometric redshift (photo-z) bins to reconstruct the scattering rates matrix between redshift bins. In this paper, we test a recently proposed self-calibration algorithm using the DECaLS Data Release 9 and investigate to what extent the scattering rates are determined. We first mitigate the spurious angular correlations due to imaging systematics by a machine learning based method. We then improve the algorithm for χ 2 minimization and error estimation. Finally, we solve for the scattering matrices, carry out a series of consistency tests, and find reasonable agreements: (1) finer photo-z bins return a high-resolution scattering matrix, and it is broadly consistent with the low-resolution matrix from wider bins; (2) the scattering matrix from the Northern Galactic Cap is almost identical to that from Southern Galactic Cap; (3) the scattering matrices are in reasonable agreement with those constructed from the power spectrum and the weighted spectroscopic subsample. We also evaluate the impact of cosmic magnification. Although it changes little the diagonal elements of the scattering matrix, it affects the off-diagonals significantly. The scattering matrix also shows some dependence on scale cut of input correlations, which may be related to a known numerical degeneracy between certain scattering pairs. In conclusion, this work demonstrates the feasibility of the self-calibration method in real data and provides a practical alternative to calibrate the redshift distributions of photometric samples.

79 ASTRONOMY AND ASTROPHYSICS↗

Diurnal cycle of precipitation over the tropics and central United States: intercomparison of general circulation models

Diurnal precipitation is a fundamental mode of variability that climate models have difficulty in accurately simulating. Here, in this work, the diurnal cycle of precipitation (DCP) in participating climate models from the Global Energy and Water Exchanges' DCP project is evaluated over the tropics and central United States. Common model biases such as excessive precipitation over the tropics, too frequent light-to-moderate rain, and the failure to capture propagating convection in the central United States still exist. Over the central United States, the issues of too weak rainfall intensity in climate runs is well improved in their hindcast runs with initial conditions from numerical weather prediction analyses. But the improvement is minimal over the central Amazon. Incorporating the role of the large-scale environment in convective triggering processes helps resolve the phase-locking issue in many models where precipitation often incorrectly peaks near noon due to maximum insolation over land. Allowing air parcels to be lifted above the boundary layer improves the simulation of nocturnal precipitation which is often associated with the propagation of mesoscale systems. Including convective memory in cumulus parameterizations acts to suppress light-to-moderate rain and promote intense rainfall; however, it also weakens the diurnal variability. Simply increasing model resolution (with cumulus parameterizations still used) cannot fully resolve the biases of low-resolution climate models in DCP. The hierarchy modeling framework from this study is useful for identifying the missing physics in models and testing new development of model convective processes over different convective regimes.

58 GEOSCIENCES↗

Evaluation of Model Summertime Boundary Layer Cloud Development over Complex Terrain in New York State

Weather forecasting over complex terrain with diverse land cover is challenging. Utilizing the high-resolution observations from New York State Mesonet (NYSM), we are able to evaluate the surface processes of the Weather Research Forecast (WRF) Model in a detailed, scale-dependent manner. Here, in the study, possible impacts of land–atmosphere interaction on surface meteorology and boundary layer cloud development are investigated with different model resolutions, land surface models (LSMs), and planetary boundary layer (PBL) physical parameterizations. The High-Resolution Rapid Refresh, version 3 (HRRR), forecasting model is used as a reference for the sensitivity evaluation. Results show that over complex terrain, the high-resolution simulations (1 km × 60 vertical levels) generally perform better compared to low-resolution (3 km × 50 levels) in both surface meteorology and cloud fields. LSMs play a more important role in surface meteorology compared to PBL schemes. The NoahMP land surface model exhibits daytime warmer and drier biases compared to the Rapid Update Cycle (RUC) due to better prediction of the Bowen ratio in RUC. The PBL schemes would affect the convective strength in the boundary layer. The Shin–Hong (SH) scale-aware scheme tends to produce the strongest convective strength in the PBL, while the ACM2 PBL scheme rarely resolved convection even at 1-km resolution. By considering the radiation effect of subgrid-scale (SGS) clouds, the Mellor–Yamada–Nakanishi–Niino eddy diffusivity mass flux (MYNN-EDMF) predicted the highest cloud coverage and lowest surface solar radiation bias. The configuration of SGS clouds in MYNN-EDMF would not only significantly reduce shortwave radiation bias, but also affect the convection behaviors through land surface–cloud–radiation interaction.

54 ENVIRONMENTAL SCIENCES↗

Unrolled Video Super-Resolution Network with Autoregressive Prior for the Case of Known Motion

Real-time detection and classification of distant objects is necessary for many national security applications. However, when objects are far from the sensor, they occupy only a small number of pixels in the captured video, limiting the amount of visual detail available for recognition. State-of-the-art classification methods typically rely on high-resolution (HR) video streams to capture characteristic object features, but obtaining such detail is challenging for distant objects that occupy only a few pixels. This motivates the development of video super-resolution (VSR) methods that enhance object classification by recovering fine details from low-pixel representations. Current VSR methods rely either on model-based optimization, which is interpretable but computationally expensive, or on learning-based approaches, which are efficient and high-performing but often lack flexibility and interpretability. In this report, we propose an end-to-end trainable unrolled VSR network, UVSRNet, which super-resolves each frame in a video by exploiting sub-pixel motion between neighboring low-resolution (LR) frames as well as incorporating high-frequency detail from previously super-resolved frames. In particular, by unrolling a plug-and-play (PnP) half-quadratic splitting (HQS) algorithm, we leverage a model-based data-fitting module alongside a learning-based autoregressive prior module. This combination yields a method that maintains the flexibility and interpretability of model-based methods while achieving the performance advantages of learning-based methods.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗