Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Launch Campaign”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

A rocket tomography measurement of the N2(+) 3914 A emission rates within an auroral arc

A rocket tomography experiment designed to measure the two-dimensional distribution of the N2(+) 3914 A volume emission rates within an auroral arc is described. A simple filter photometer on board a sounding rocket, which was launched during the ARIES auroral campaign, was used to measure the 3914 A aruoral brightnesses at elevation angles ranging from 0 to 360 deg in the plane of the rocket trajectory. The measured auroral brightnesses have been tomographically inverted to recover the local 3914 A volume emissioin rates as a function of both altitude and latitude within the arc. The tomographic inversion procedure, which is based upon a maximum probability algebraic reconstruction approach, is described, and the implications of the results for studies of auroral excitation processes are briefly discussed.

Mcdade, I. C.↗

Characterizing Spatio-Temporal Ozone Gradients Along Coastal Boundaries: Sondes and Mobile Measurements from OWLETS-2

One of the major difficulties for the modeling and satellite communities is the validation of O3 levels in sharp coastal transition regions within metropolitan areas. Land-water gradients of ozone as well as its precursors can be significant due to differences in emissions, land use, surface deposition, boundary layer height, and mesoscale wind patterns. The Ozone Water-Land Environmental Transition Study (OWLETS-2) was a follow-on field campaign spearheaded by NASA GSFC and LaRC's Tropospheric Ozone Lidar Network (TOLnet) conducted in the summer of 2018 within the Upper Chesapeake region to better characterize spatial and vertical distribution of various pollutants across the coastal boundary. Supporting this campaign, 40 ozonesondes were simultaneously launched directly in the marine environment on Hart Miller Island (HMI) and on two land sites: both the University of Maryland, Baltimore County (UMBC) and Howard University-Beltsville (HUBV). In addition, Personal Ozone Monitors (POMs) - small sensors - were deployed in a variety of environments - car, boat, and drone, to name a few - to quantify ozone across fine spatial and temporal thresholds. The purpose of these measurements is multifaceted: to provide both ozone pollution information to coastal metropolitan communities and validation to satellite, modeling, and forecasting communities, especially in current and future satellite endeavors such as TROPOMI and TEMPO.

coastal pollution↗

Reusable In-Space Transportation Architecture Options for Human Mars Expeditions

NASA has been investigating the use of Solar Electric Propulsion, Chemical Propulsion, and Nuclear Thermal Propulsion systems to deliver crew and cargo to Mars orbit in support of expeditions to the Martian surface. In order to evaluate the effect of the selection of in-space transportation options on a series of human Mars missions across multiple opportunities, campaign level analysis must be performed and the transportation options must be evaluated using the same set of ground rules and assumptions to provide equal comparison. In this study, a comparison of three in-space transportation options was shown from a campaign level perspective. Campaign level metrics such as total launch mass, launch vehicle launch rate, and total launch vehicle required are presented to show how the different transportation systems perform to field a series of Mars missions across multiple mission opportunities. Each transportation option was utilized to perform three crew roundtrip missions to Mars, with supporting cargo missions starting in 2029, the first crewed mission to Mars in 2035. The transportation options each have strengths and weaknesses from a campaign and strategic investment point of view, as evident by the comparison between the total launch mass and the total number of launch vehicles required. While the analysis shown in this study provides an initial comparison between the transportation options, significant challenges still exists for each options in terms of the detailed mission operations and the feasibility of all of the assumptions.

Chai, Patrick R.↗

Systems Engineering and Technology Considerations of a Mars Ascent Vehicle

A Mars Ascent Vehicle (MAV) systems engineering study is underway to define the driving requirements, system architecture, major risks, and required technology developments to support the launch of a rock core sample to a specified delivery orbit for later retrieval and return to Earth. The proposed MAV would essentially be a small-scale launch vehicle, the first of its kind to be launched autonomously from another planet. The MAV would be a flight element of the proposed Mars Sample Return (MSR) campaign architecture, which currently assumes a 2018 launch of the sample caching mission and a 2024 (Earth) launch date of the MAV and lander, with arrival on Mars in 2025. After 9 months on the surface the MAV would be erected and launched to a specified delivery orbit. In the delivery orbit it would release its payload, a 5 kg sphere containing the rock core sample. An orbiter would rendezvous and capture the payload, returning it to Earth a year later.

entry, descent, and landing (EDL)↗

Impacts of Launch Vehicle Fairing Size on Human Exploration Architectures

Human missions to Mars, particularly to the Martian surface, are grand endeavors that place extensive demands on ground infrastructure, launch capabilities, and mission systems. The interplay of capabilities and limitations among these areas can have significant impacts on the costs and ability to conduct Mars missions and campaigns. From a mission and campaign perspective, decisions that affect element designs, including those based on launch vehicle and ground considerations, can create effects that ripple through all phases of the mission and have significant impact on the overall campaign. These effects result in impacts to element designs and performance, launch and surface manifesting, and mission operations. In current Evolvable Mars Campaign concepts, the NASA Space Launch System (SLS) is the primary launch vehicle for delivering crew and payloads to cis-lunar space. SLS is currently developing an 8.4m diameter cargo fairing, with a planned upgrade to a 10m diameter fairing in the future. Fairing diameter is a driving factor that impacts many aspects of system design, vehicle performance, and operational concepts. It creates a ripple effect that influences all aspects of a Mars mission, including: element designs, grounds operations, launch vehicle design, payload packaging on the lander, launch vehicle adapter design to meet structural launch requirements, control and thermal protection during entry and descent at Mars, landing stability, and surface operations. Analyses have been performed in each of these areas to assess and, where possible, quantify the impacts of fairing diameter selection on all aspects of a Mars mission. Several potential impacts of launch fairing diameter selection are identified in each of these areas, along with changes to system designs that result. Solutions for addressing these impacts generally result in increased systems mass and propellant needs, which can further exacerbate packaging and flight challenges. This paper presents the results of the analyses performed, the potential changes to mission architectures and campaigns that result, and the general trends that are more broadly applicable to any element design or mission planning for human exploration.

Jefferies, Sharon↗

Deep Space navigation for the BioSentinel spacecraft science orbit

BioSentinel is an astrobiology small spacecraft mission. The payload consists of two parts, the first has optical and microfluidics sensors, and the second is a Linear Energy Transfer spectrometer that has the objective to measure deep space radiation from events such as coronal mass ejections. The goal of the mission is to observe potential DNA damage due to the radiation in heliocentric space on the living organism Saccharomyces cerevisiae, which is a budding yeast. Two types of this living organism are included in the payload. The first is a natural type that is more radiation tolerant, while the second is a mutant strain that has a deficiency in a gene that allows DNA repair once damage occurs. The impact caused by the radiation on the DNA is compared to an identical sample aboard the International Space Station, as well as another identical sample at a laboratory on the ground. The BioSentinel mission consists of a 6U CubeSat currently ,as of January 2024, active in heliocentric orbit. The spacecraft was launched aboard the first SLS flight as part of the Artemis-I campaign in November 2022. After successful deployment from the launch vehicle, it performed a lunar flyby with an altitude of 406 km. The delta-V imparted by the flyby provided the necessary energy to achieve a heliocentric orbit, in an Earth-trailing pattern. The navigation analysis consisted of a Kalman-filter that utilized data from the Deep Space Network and the ESA Estrack network. All those antennas were needed since the Artemis-1 campaign included the deployment of several other cubesats, therefore the scheduling process required more antenna assets than usual due to simultaneous demands from various missions. The processed tracking data was later also refined with a smoother in order to obtain a more accurate solution. The type of tracking data included TCP, Sequential Range, Doppler and Range formats. The solar radiation pressure coefficient, as well as the delta-V from the deployment and the flyby were modeled to obtain suitable solutions that could decrease the position and velocity uncertainties at several steps along the mission concept of operations. The final product each time resulted in updated ephemeris files that were used by the mission and the antenna networks as the mission progressed. Once in the final science orbit, the utilized antennas are only from the DSN network and the data format is bounded to just TCP. Regular orbit determination is performed, every two weeks. The spacecraft is in a nominal well-known orbit, performing regular operations. This paper includes an analysis of the final science orbit, the techniques and procedures utilized to perform orbit determination and a description of the overall navigation campaign produced during the mission and, more specifically, during the final science operations in Deep Space.

BioSentinel↗

Mid-Latitude Atmospheric Variability Between 20-60 KM from Rocketsonde Measurements

The information obtained from deployment of instrumented meteorological rockets provides middle atmospheric data in a region that is difficult to measure by other means. In the last two decades, in-situ measurements of the middle atmosphere have become less frequent and only originate from a handful of locations. However, the value of these measurements continues to be proven through the validation of remote sensing techniques, support of other payloads sampling the region, and as importantly, the continued study of the rocket datasets with the details and trends that they hold. Wallops Island (37.8 N, 75.5 W) has one of the longest meteorological rocket data records available with relatively few system changes. Two particular periods from this record are studied: (1) January/February and (2) July/August, 1977. Both data sets consist of Super-Loki meteorological rockets with a Datasonde and Starute payload, which yield temperature and wind profiles. The January/February set consists of almost daily launches with days with multiple launches interspersed through January. In the July/August set, rockets were launched for thirty consecutive days at nearly the same time daily from Wallops Island. This campaign was immediately followed by sets of multiple launches with up to six launches per day separated by hours and in some cases minutes. The unique nature of the data allows a detailed examination of the atmosphere's short-term variability. These results are compared to the current views of middle atmospheric dynamics and turbulence from altitudes in the range of 20-60 km.

Schauer, A. G.↗

Mission analysis for a potential Mars Sample Return campaign in the 2020's

The Mars 2020 mission, currently under development by NASA, plans to acquire and cache carefully-selected rock and regolith samples from the surface of Mars for potential future return. NASA and ESA are jointly studying options for returning those samples to Earth with missions launching in the 2020s. This paper demonstrates a method for modeling the various campaign elements, synthesizing coordinated campaign timelines, and assuring trajectory feasibility in the presence of many constraints, and finally optimizing towards mission success. Options for complete sample return campaigns in multiple launch and arrival opportunities are explored and compared.

Huesing, Jakob↗

The Guara Campaign: Rocket-Radar Investigations of the Earth's Upper Atmosphere at the Magnetic and Geographic Equators

The Guara Campaign consisted of a series of sounding rockets that were launched from August to October, 1994 at a new launch facility at Alcantara, Brazil, which is within one degree of the Earth's magnetic equator. The campaign was based on focused scientific experiments designed to investigate the electrodynamics and irregularities in the ionosphere and mesosphere at the Earth's magnetic equator and to study their relationship with neutral upper atmosphere motions. In all, 13 large sounding rockets and 20 small meteorological rockets were launched as part of four different experiment groups designed to investigate: (1) the daytime equatorial electrojet, (2) very high altitude Spread-F processes, (3) sunset electrodynamics, and (4) middle atmosphere-thermosphere coupling at the equator. The instrumentation on the sounding rockets varied with each investigation, but primarily included experiments to measure electric fields, currents, plasma densities,- neutral winds, neutral densities and temperatures, and ionospheric instabilities. All of the experiments utilized ground-based scientific instruments including a VHF backscatter radar interferometer, magnetometers, ionosondes, and scintillation receivers. An overview of each investigation is provided, along with a description of the launch site and the ground-based experiments. Scientific highlights of the campaign are provided.

Pfaff, Robert F., Jr.↗

Large Payload Ground Transportation and Test Considerations

Many spacecraft concepts under consideration by the National Aeronautics and Space Administration’s (NASA’s) Evolvable Mars Campaign take advantage of a Space Launch System payload shroud that may be 8 to 10 meters in diameter. Large payloads can theoretically save cost by reducing the number of launches needed--but only if it is possible to build, test, and transport a large payload to the launch site in the first place. Analysis performed previously for the Altair project identified several transportation and test issues with an 8.973 meters diameter payload. Although the entire Constellation Program—including Altair—has since been canceled, these issues serve as important lessons learned for spacecraft designers and program managers considering large payloads for future programs. A transportation feasibility study found that, even broken up into an Ascent and Descent Module, the Altair spacecraft would not fit inside available aircraft. Ground transportation of such large payloads over extended distances is not generally permitted, so overland transportation alone would not be an option. Limited ground transportation to the nearest waterway may be possible, but water transportation could take as long as 67 days per production unit, depending on point of origin and acceptance test facility; transportation from the western United States would require transit through the Panama Canal to access the Kennedy Space Center launch site. Large payloads also pose acceptance test and ground processing challenges. Although propulsion, mechanical vibration, and reverberant acoustic test facilities at NASA’s Plum Brook Station have been designed to accommodate large spacecraft, special handling and test work-arounds may be necessary, which could increase cost, schedule, and technical risk. Once at the launch site, there are no facilities currently capable of accommodating the combination of large payload size and hazardous processing such as hypergolic fuels, pyrotechnic devices, and high pressure gasses. Ironically, the limiting factor to a national heavy lift strategy may not be the rocket technology needed to throw a heavy payload, but rather the terrestrial infrastructure—roads, bridges, airframes, and buildings—necessary to transport, acceptance test, and process large spacecraft. Failure to carefully consider where and how large spacecraft are manufactured, tested, and launched could result in unforeseen cost to modify existing (or develop new) infrastructure, or incur additional risk due to increased handling operations or eliminating key verifications. Although this paper focuses on the canceled Altair spacecraft as a case study, the issues identified here have wide applicability to other large payloads, including concepts under consideration for NASA’s Evolvable Mars Campaign.

Rucker, Michelle A.↗

The Influence of Radiosonde 'Age' on TRMM Field Campaign Soundings Humidity Correction

Hundreds of Vaisala sondes with a RS80-H Humicap thin-film capacitor humidity sensor were launched during the Tropical Rainfall Measuring Mission (TRMM) field campaigns in Large Scale Biosphere-Atmosphere held in Brazil (LBA) and in Kwajalein experiment (KWAJEX) held in the Republic of Marshall Islands. Using Six humidity error correction algorithms by Wang et al., these sondes were corrected for significant dry bias in the RS80-H data. It is further shown that sonde surface temperature error must be corrected for a better representation of the relative humidity. This error becomes prominent due to sensor arm-heating in the first 50-s data.

Roy, Biswadev↗

A Comparison of Aircraft Flyover Auralizations by the Aircraft Noise Simulation Working Group

The Aircraft Noise Simulation Working Group (ANSWr), comprised of NASA, DLR, and ONERA, recently completed an analysis campaign to compare aircraft noise simulation tools, establish guidelines for noise prediction, and launch activities to assess uncertainties associated with the simulation. The campaign included the analyses of two DLR conceptual aircraft, a reference tube-and-wing aircraft, and a low noise aircraft with engines mounted above the fuselage-wing-junction. While the total predicted noise for each of the concepts compared favorably among analyses at the peak level, significant differences were noted at the component level. This paper aims to further that effort by auralizing aircraft flyover noise associated with those predictions. Comparisons are made among the NASA, DLR/Empa, and ONERA generated sounds to determine how differences between the system noise prediction and auralization methods result in changes to the auralized sound.

Stephen A Rizzi↗

Rocket observations of energetic particles at the geomagnetic equator

Energetic particle detectors were included in the payloads of two rockets launched in Peru during the Condor campaign of 1983. These night-time flights reached altitudes of 587 and 535 km, respectively. The pitch-angle distribution is anisotropic with the maximum at 90 deg. Each payload included two solid-state detectors differing in the thickness of the aluminum coating. Comparison of the fluxes measured by the two detectors leads to the conclusion that, on both occasions, the energetic particles are predominantly helium ions. The flux is small below 200 km, increases linearly to 350 km, and then more slowly to apogee. The east-west asymmetry of flux, noted at 200 km in a previous equatorial launch, is not seen at greater altitudes, consistent with the flux profile and the large gyroradius of the ions.

Smith, L. G.↗

Potential campaign architectures and mission design challenges for near-term international Mars Sample Return mission concepts

Mars Sample Return (MSR) continues to be a high priority in the planetary science community and a decades-long goal of international planetary exploration programs. Options for architectures and mission concepts are currently under study by NASA and ESA to find potential partnership opportunities to achieve MSR in the 2020s. The major elements of a potential MSR campaign have significant architectural flexibility and mission launch, arrival, and return options. The decision criteria often depend on mission design and functional allocations across many elements. This paper outlines the reference architecture and key trades among the campaign elements.

Olikara, Zubin↗

Initial Look at the Results From the Prelaunch Characterization Campaign of OCI on the Pace Mission

Scheduled for launch in January 2024, the Phytoplankton, Aerosol, Cloud, and ocean Ecosystem (PACE) mission represents NASA’s next investment in ocean biology, clouds, and aerosol data records [1]. A key feature of PACE is the inclusion of an advanced satellite radiometer known as the Ocean Color Instrument (OCI), a global mapping radiometer that combines multispectral and hyperspectral remote sensing. This paper describes the results of the prelaunch test campaign of the OCI Flight Unit. The measured OCI flight unit performance exceeded requirement thresholds in all critical areas. Overall, the performance of the OCI is excellent, and will allow the PACE science team to meet its science objectives.

Calibration↗

Maven Orbital Trajectory Analysis: Design and Implementation of Lander Relay Support

NASA’s successful Mars Atmosphere and Volatile Evolution Mission (MAVEN), currently engaged in a survey of the Martian atmosphere and its evolution over time, has successfully completed a series of orbit changes, including a two-month aerobraking campaign, to satisfy additional mission roles. Launched on 18 November 2013, it entered Martian orbit on 22 September 2014. Having finished its primary one-year mission, the NASA Mars Program Office (MPO) started discussions with the MAVEN project on feasible options for extending the mission lifetime along with providing support for various Mars lander functions. MAVEN is the latest of the three active NASA Mars orbiters, with no others planned for the foreseeable future. Given that the landers need orbital relay support for years to come, and the MRO and Odyssey orbiters are aging, MAVEN’s role in providing critical orbital relay support has become increasingly important. After several years of studies, MPO directed the MAVEN project in 2018 to reduce its orbit size to provide better telecommunications relay support for Martian surface landers and to support Mars 2020 EDL under the constraint that MAVEN will have enough fuel to operate until 2030. As a part of this effort, the recent aerobraking campaign was one of several steps crucial to accomplishing this goal. This paper discusses the challenges of the entire mission design and its distillation into a concrete set of targeted objectives. With the successful orbit change, MAVEN will be able to provide support for the Mars 2020 relay activities from EDL through surface operations beyond 2030. This effort can serve as an excellent example for future missions having similar needs and requirements.

Jakosky, B. M.↗

Assessment Of Polsar And Insar Time-Series From The 2019 Nasa Am-Pm Campaign For Above-Ground Biomass Estimation

The forthcoming launch of the NASA-ISRO Synthetic ApertureRadar (NISAR) mission will open the path to a new typeof L-band measurements constituted by dense time-series ofpolarimetric backscatter and interferometric coherence withunprecedented spatial and temporal sampling. Here, we startthe development of a theoretical framework that links L-bandbackscatter time-series with interferometric coherence measurements.The water-cloud-model (WCM) and an extendedversion of the random-motion-over-ground (RMoG) modelare adopted to express radar measurements in terms of forestabove-ground biomass and tree height. Time-series datacollected during the 2019 UAVSAR AM-PM campaign inSoutheastern United States are used to evaluate the correlationof various PolSAR- and InSAR-derived parameters withfield-measured above-ground biomass.

Lavalle, Marco↗

Scheduling and Operations of the ECOSTRESS Mission

This paper describes the development and use of an automated scheduling system for the National Aeronautics and Space Administration’s (NASA) ECOsystem Spaceborne Thermal Radiometer Experiment on Space Station (ECOSTRESS) mission. Key to the success of the ECOSTRESS mission has been the use of automated scheduling in mission analysis pre-launch, and in successful operations where automated scheduling was deployed to address several operational challenges. ECOSTRESS uses an adaptation of the Compressed Large-scale Activity Scheduling and Planning (CLASP) system to automatically select science observations respecting area and point target priorities as well as visibility, illumination, onboard storage, and radiation constraints to satisfy high-level prioritized science campaigns. The ECOSTRESS scheduler was used pre-launch to predict the effectiveness of alternative formulations of science campaign definitions accounting for the impact of data volume, keepout, and orbit/illumination/visibility constraints to derive the initial operational science campaign definitions and priorities. The scheduler was then used after instrument checkout for operations. ECOSTRESS has faced multiple operational challenges relating to instrument firmware and hardware, and the scheduler has been updated several times to address these challenges. The instrument Mass Storage Units (MSUs) had operational issues, requiring the scheduler to plan for and schedule commands to handle intricacies of data management. After many months of operations, both MSUs on the instrument became non-functioning and the firmware of the instrument was updated to bypass the MSUs. A further update to the ECOSTRESS scheduler enabled the scheduler to operate in this new operations mode. The ECOSTRESS scheduler has also been updated to improve handling of along-track uncertainty inherent in International Space Station operations. The flexibility and ease of updating of the automated scheduler has been a significant contributor to successful operations of the ECOSTRESS mission.

Padams, Jordan↗