SEARCH · Engineering Papers

Results for “Lattice”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

All sources NASA NTRS DOE OSTI

DOE OSTI2025

Multicationic interactions mitigating lattice strain in sodium layered cathodes

Transition-metal (TM) layered oxides have emerged as the primary cathode choice for sodium-ion batteries (SIBs) due to their high energy density and sustainable chemistry using non-critical elements. However, their anisotropic lattice strain and stress accumulation during (de)sodiation lead to severe structural degradation, yet an intrinsic strain-depressant approach remains elusive. Herein, we propose entropy regulation with zero Li/Co usage to mitigate harmful lattice displacements and enhance the electrochemical performance of sodium layered cathodes. Our findings demonstrate that high entropy design effectively inhibits TMO 6 octahedra distortions upon cycling, as evidenced by hard X-ray absorption spectroscopy, greatly reducing near-surface structural deconstruction and interface side reactions. Furthermore, multicationic interactions driven by configurational entropy thermodynamically mitigate the formation of oxygen defects and strengthen ligand-to-metal coordination. The complementarity inherent in charge compensation within complex systems is unveiled and the restrained lattice parameters deviations without interior volume residuals are successfully achieved. As a result, the multicationic cathode exhibits improved cycling stability and Na + diffusion kinetics in both half and full cells. The cathode chemistries outlined here broaden the prospects for lattice engineering to alleviate bulk fatigue and open up the possibility to develop an economically viable layered oxides with long durability.

Wang, Haoji [Central South University, Changsha (C↗

DOE OSTI2024

Hidden orders and phase transitions for the fully packed quantum loop model on the triangular lattice

Abstract Quantum loop and dimer models are prototypical correlated systems with local constraints, which are not only intimately connected to lattice gauge theories and topological orders but are also widely applicable to the broad research areas of quantum materials and quantum simulation. Employing our sweeping cluster quantum Monte Carlo algorithm, we reveal the complete phase diagram of the triangular-lattice fully packed quantum loop model. Apart from the known lattice nematic (LN) solid and the even$${{\mathbb{Z}}}_{2}$$ Z 2 quantum spin liquid (QSL) phases, we discover a hidden vison plaquette (VP) phase, which had been overlooked and misinterpreted as a QSL for more than a decade. Moreover, the VP-to-QSL continuous transition belongs to the (2 + 1)D cubic * universality class, which offers a lattice realization of the (fractionalized) cubic fixed point that had long been considered as irrelevant towards the O(3) symmetry until corrected recently by conformal bootstrap calculations. Our results are therefore of relevance to recent developments in both experiments and theory, and facilitate further investigations of hidden phases and transitions.

Physics↗

DOE OSTI2024

Element-specific ultrafast lattice dynamics in FePt nanoparticles

Light–matter interaction at the nanoscale in magnetic alloys and heterostructures is a topic of intense research in view of potential applications in high-density magnetic recording. While the element-specific dynamics of electron spins is directly accessible to resonant x-ray pulses with femtosecond time structure, the possible element-specific atomic motion remains largely unexplored. We use ultrafast electron diffraction (UED) to probe the temporal evolution of lattice Bragg peaks of FePt nanoparticles embedded in a carbon matrix following excitation by an optical femtosecond laser pulse. The diffraction interference between Fe and Pt sublattices enables us to demonstrate that the Fe mean square vibration amplitudes are significantly larger that those of Pt as expected from their different atomic mass. Both are found to increase as energy is transferred from the laser-excited electrons to the lattice. Contrary to this intuitive behavior, we observe a laser-induced lattice expansion that is larger for Pt than for Fe atoms during the first picosecond after laser excitation. This effect points to the strain-wave driven lattice expansion with the longitudinal acoustic Pt motion dominating that of Fe.

36 MATERIALS SCIENCE↗

DOE OSTI2026

Hot electron preheat effects in two-photon polymerization plastic lattice laser-driven shock-tube experiments on the OMEGA laser

We present simulations of Omega shock tube experiments designed to investigate hot electron preheat effects in 3D-printed, two-photon polymerization (2PP) plastic lattices. Preheat is inferred in the experiments from the expansion of a plastic witness disk embedded in the lattice. Using the Eulerian radiation-hydrodynamics code xRAGE, we model shock propagation and preheat from both radiative and hot electron energy sources to evaluate their relative impact. To simulate the transport of laser-generated hot electrons, the nonlocal electron heat transport model proposed by Schurtz, Nicolaï, and Busquet (SNB) is extended with a hot electron source term and an energy cascade algorithm. We explore how variations in ablator, lattice geometry, and laser drive affect the shock velocity and witness disk expansion. Simulations show that the inclusion of a 5 μm gold layer reduces shock pressure by 60% and shock speeds by 30%–40% but does not significantly reduce the hot electron preheat, and that different lattice geometries lead to enhanced shock velocities—up to 40% faster than in homogeneous foams. However, radiative and conductive preheat from classical mechanisms alone fail to match experiment. By including a hot electron source term, we reproduce experimental observables such as disk expansion rates and spatial radiographic features. We find that a hot electron population corresponding to 4%–8% of the incident laser energy with T hot = 50 keV produces expansion which agrees with the experimental data, suggesting hot electron preheat is the most plausible explanation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2026

Initial Assessment of 3D-Printed Molybdenum Lattices as a Substrate for Liquid Metal Plasma-Facing Components

Many liquid metal plasma-facing component concepts for fusion reactors require a capillary porous material to wick the liquid metal to the surface of the component. In this work, samples of 3D-printed molybdenum lattices designed to have pore sizes ranging from 100 to 1000 µm were fabricated by two different suppliers. The dimensions of the lattice structures were characterized using an optical microscope, revealing that the lattice walls were almost systematically thicker than they were designed to be and in turn the pores are all smaller than they were designed to be. In many cases the pores were completely clogged. Several spectroscopic techniques were used to characterize the chemical composition of the materials, collectively indicating the presence of a thick layer of oxygen-rich material extending more than 1 µm below the surface. Compression testing revealed significant asymmetry in the mechanical behavior depending on which direction the force was applied relative to the print direction. Lastly, lithium wetting tests of several lattice samples were performed, and a sample with ~250-µm pores was found to soak up lithium quickly after initial wetting of the surface occurred. The implications of these results for future liquid metal plasma-facing component design are discussed.

Parsons, Matthew S. [Princeton Plasma Physics Labo↗

DOE OSTI2024

Systematic Uncertainties from Gribov Copies in Lattice Calculation of Parton Distributions in the Coulomb Gauge

Recently, a new method has been proposed to compute parton distributions using boosted correlators fixed in the Coulomb gauge (CG) within the framework of large-momentum effective theory. This approach, which does not involve Wilson lines, could greatly improve the efficiency and precision of lattice quantum chromodynamics calculations. However, concerns remain regarding whether systematic uncertainties from Gribov copies, which correspond to ambiguities in lattice gauge-fixing, are adequately controlled. This work assesses the effects of Gribov copies on Coulomb-gauge-fixed quark correlators. We utilize different strategies for Coulomb-gauge fixing, selecting two different groups of Gribov copies based on lattice gauge configurations. We examine the differences in the resulting spatial quark correlators in both vacuum and pion states. Our findings indicate that the statistical errors of the matrix elements from both Gribov copies, regardless of the correlation range, decrease proportionally to the square root of the number of gauge configurations. The difference between the strategies does not show statistical significance compared to the gauge noise, demonstrating that the effect of the Gribov copies can be neglected in practical lattice calculations of quark parton distributions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2026

Lattice vacancy migration barriers in Fe-Ni alloys, and an indication as to why Ni atoms diffuse slowly: A first-principles study

Lattice vacancy migration barriers in ferromagnetic Fe 𝑥 ⁢Ni 1−𝑥 alloys (0.4 ≤ 𝑥 ≤ 0.6) are accurately quantified within the framework of ab initio electronic structure calculations using the nudged elastic band (NEB) method. Both the atomically disordered (A1) fcc phase, as well as the atomically ordered, tetragonal L⁢1 0 phase—which is under consideration as a material for a rare-earth-free gap magnet for advanced engineering applications—are investigated. Across an ensemble of NEB calculations performed on supercell configurations spanning a range of compositions and containing disordered, partially ordered, and fully ordered structures, we find that Ni-vacancy interchanges encounter significantly higher energetic barriers than do Fe-vacancy interchanges. We contend that this aspect is a key factor in determining the differences in mobility between Fe and Ni atoms in this ferromagnetic alloy. Moreover, we are able to interpret these findings in terms of the ferromagnetic alloy's underlying spin-polarized electronic structure. Specifically, we report a coupling between the size of local lattice distortions and the magnitude of the local electronic spin polarization around vacancies. This causes Fe atoms to relax into lattice vacancies, while Ni atoms remain rigidly fixed to their original lattice positions. These results give atomic-scale insight into the longstanding experimental observation that Ni exhibits remarkably slow atomic diffusion in Fe-Ni alloys.

density functional theory↗

DOE OSTI2025

Anomalous lattice relaxation dynamics in optimally doped La 2−𝑥⁢ Sr 𝑥 ⁢CuO 4

The atomic lattice plays a critical role in the emergence of high-𝑇 𝑐 superconductivity in cuprates. While the dynamics associated with electron-lattice coupling typically unfold on picosecond-to-femtosecond timescales, we present an x-ray photon correlation spectroscopy investigation on an optimally doped La-based cuprate that reveals a strong response of kilosecond-scale lattice relaxation dynamics to the superconducting state. Notably, an anomaly emerges around 𝑇 𝑐 : upon cooling into the superconducting state, the average atomic relaxation lifetime decreases, i.e., dynamics accelerate. This indicates a significant change in the local disorder-induced strain field dynamics at the superconducting transition, highlighting a remarkable coupling between superconductivity and the lattice on quasistatic timescales.

Petsch, A. N. [SLAC National Accelerator Laborator↗

DOE OSTI2025

Close-up view of the interplay between lattice distortions and charge density waves: Case study on rare-earth nickel carbides

Using variable temperature total x-ray scattering and large-scale structure modeling, we study the temperature and composition evolution of lattice distortions and charge density waves (CDWs) in the archetypal strongly correlated system RENi⁢ C 2 (RE=Dy, Tb, Gd, and Sm). Joint analysis of reciprocal and real space data reveals the presence of strong lattice distortions that, depending on the RE species and temperature, appear periodic or remain local, forming a complex CDW phase diagram. Apparently, the CDWs in RENi⁢ C 2 materials arise from a common to the system lattice instability involving diverse distortion modes that persist when magnetic order also sets in at very low temperature. In conclusion, the results support the notion that intrinsic lattice distortions are important to the emergence of exotic electronic phases in strongly correlated systems and call for their further investigation using the advanced approach adopted here.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Manipulating Cu vacancy in Yb triangular lattice Materials: Investigating the quantum disordered compound CuYbSe 2 and spin glass Cu 2.73 ⁢YbP 2

Yb-based triangular lattice materials have attracted significant attention due to their potential for hosting exotic magnetic quantum states. In this paper, we report the structural, magnetic, and thermodynamic properties of two Yb triangular lattice compounds with vacancy disorder at nonmagnetic Cu sites: CuYbSe 2 and Cu 2.73 ⁢YbP 2 . Single-crystal x-ray diffraction determines notable Cu-site vacancies in both materials. Unlike a single Cu site with 0.5 occupancy in CuYbSe 2 , Cu 2.73 ⁢YbP 2 only presents 27% vacancies on one of three Cu sites. Magnetic susceptibility measurements indicate dominant antiferromagnetic interactions between Yb 3+ ions. The effective magnetic moment is consistent with an effective spin-1/2 state of Yb 3+ . CuYbSe 2 exhibits strong magnetic anisotropy between in-plane and out-of-plane directions with the estimated exchange interactions 𝐽 𝑎 /𝑘 B = 6.48 K and 𝐽 𝑐 /𝑘 B = 2.55 K. No magnetic ordering is observed down to 0.4 K, supporting its quantum disordered ground state and candidacy as a quantum spin liquid. In contrast, Cu 2.73 ⁢YbP 2 shows clear evidence of spin freezing at 4.5 K in both magnetization and heat capacity data, indicating a spin glass state. The field-induced magnetic orders are found in CuYbSe 2 . These results highlight the critical role of structural vacancies in perturbing Yb-based triangular lattices. In conclusion, we demonstrate that while the intrinsic Yb triangular lattices are comparable, the presence of Cu vacancies can fundamentally alter the magnetic ground state—tuning the system between quantum disordered and spin glass behavior.

Frustrated magnetism↗

DOE OSTI2026

Lattice calculation of short-range contributions to neutrinoless double-beta decay 𝜋 − → 𝜋 + ⁢𝑒⁢𝑒 at physical pion mass

Neutrinoless double-beta (0⁢𝜈⁢𝛽⁢𝛽) decays provide an excellent probe for determining whether neutrinos are Dirac or Majorana fermions. The short-range matrix elements associated with the 𝜋 − → 𝜋 + ⁢𝑒⁢𝑒 process contribute at leading order in the 0⁢𝜈⁢𝛽⁢𝛽 decay channel 𝑛⁢𝑛 → 𝑝⁢𝑝⁢𝑒⁢𝑒 through pion exchange between nucleons. However, current lattice calculations show notable discrepancies in predicting these short-range contributions. To address this issue, we perform a lattice QCD calculation of the 𝜋 − → 𝜋 + ⁢𝑒⁢𝑒 matrix elements using domain wall fermion ensembles at the physical pion mass generated by the RBC/UKQCD Collaboration. To mitigate contamination from around-the-world effects, we develop a new method to reconstruct and subtract them directly from lattice data. We then perform nonperturbative renormalization in the regularization-independent symmetric momentum-subtraction scheme (RI/SMOM), using the (𝛾 𝜇 , 𝛾 𝜇 ) and ($\not{𝑞}$, $\not{𝑞}$) projectors. Compared with previous studies, this work reduces the uncertainties in the matrix elements and provides an independent cross-check that helps to reconcile the discrepancies among previous lattice calculations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2024

Magnetic properties of the double trillium lattice antiferromagnet KBaCr 2 ⁢(PO 4 ) 3

Trillium lattices formed by corner-shared triangular units are the platform for magnetic frustration in three dimensions. Herein, we report structural and magnetic properties of the Cr-based (S = 3/2) double trillium lattice material KBaCr 2 ⁢(PO 4 ) 3 studied by x-ray diffraction, dc and ac magnetization, heat capacity, thermal conductivity, and 31 P nuclear magnetic resonance (NMR) measurements complemented by density-functional band-structure calculations. Magnetization, heat capacity, and 31 P NMR measurements reveal the magnetic transition at T N⁢1 ≃ 12.5 K in zero field followed by another transition (T N⁢2 ) at low temperatures in weak applied fields. The 31 P spin-lattice relaxation rate in the ordered state follows the T 3 behavior indicative of the two-magnon Raman process. Finally, the spin lattice of KBaCr 2 ⁢(PO 4 ) 3 comprises two crystallographically nonequivalent ferromagnetic sublattices that are coupled antiferromagnetically, thus eliminating frustration in this trillium network and leading to weak ferromagnetism in the vicinity of T N⁢1 .

36 MATERIALS SCIENCE↗

DOE OSTI2024

Lattice QCD estimates of thermal photon production from the QGP

Thermal photons produced in heavy-ion collision experiments are an important observable for understanding quark-gluon plasma (QGP). The thermal photon rate from the QGP at a given temperature can be calculated from the spectral function of the vector current correlator. Extraction of the spectral function from the lattice correlator is known to be an ill-conditioned problem, as there is no unique solution for a spectral function for a given lattice correlator with statistical errors. The vector current correlator, on the other hand, receives a large ultraviolet contribution from the vacuum, which makes the extraction of the thermal photon rate difficult from this channel. We therefore consider the difference between the transverse and longitudinal part of the spectral function, only capturing the thermal contribution to the current correlator, simplifying the reconstruction significantly. The lattice correlator is calculated for light quarks in quenched QCD at T = 470 MeV ( ∼ 1.5 T c ), as well as in 2 + 1 flavor QCD at T = 220 MeV ( ∼ 1.2 T p c ) with m π = 320 MeV . In order to quantify the nonperturbative effects, the lattice correlator is compared with the corresponding NLO + LPM LO estimate of correlator. The reconstruction of the spectral function is performed in several different frameworks, ranging from physics-informed models of the spectral function to more general models in the Backus-Gilbert method and Gaussian process regression. We find that the resulting photon rates agree within errors. Published by the American Physical Society 2024

Astronomy & Astrophysics↗

DOE OSTI2025

Gluon unpolarized, polarized, and transversity GPDs from lattice QCD: Lorentz-covariant parametrization

We identify the matrix elements necessary to determine the leading-twist gluon generalized parton distributions (GPDs) H g , E g , H ˜ g , E ˜ g , H g T , E g T , H ˜ g T , E ˜ g T in lattice QCD calculations. We present a method to achieve a Lorentz-covariant parameterization of the matrix elements in terms of a linearly independent basis of tensor structures. This parameterization is crucial for projecting lattice QCD matrix elements onto light cone distributions. For the first time, we determine the corresponding components that project onto the linear combinations of invariant amplitudes, which reduce to the different gluon GPDs in the light cone limit and enable their separation in a lattice QCD calculation for spin-0 and spin- 1 2 hadrons. Hence, this work lays the foundation for the numerical determination of the gluon GPDs from first-principle lattice QCD calculations, directly advancing our understanding of the mass and spin structures and mechanical properties of the nucleon, as well as the physics underlying deeply virtual Compton scattering and deeply virtual meson production in a range of experimental processes. Published by the American Physical Society 2025

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2024

Anomaly inflow, dualities, and quantum simulation of Abelian lattice gauge theories induced by measurements

Previous work [] has demonstrated that quantum simulation of Abelian lattice gauge theories (Wegner models including the toric code in a limit) in general dimensions can be achieved by local adaptive measurements on symmetry-protected topological (SPT) states with higher-form generalized global symmetries. The entanglement structure of the resource SPT state reflects the geometric structure of the gauge theory. In this work we explicitly demonstrate the anomaly inflow mechanism between the deconfining phase of the simulated gauge theory on the boundary and the SPT state in the bulk by showing that the anomalous gauge variation of the boundary state obtained by bulk measurement matches that of the bulk theory. Moreover, we construct the resource state and the measurement pattern for the measurement-based quantum simulation of a lattice gauge theory with a matter field (Fradkin-Shenker model), where a simple scheme to protect gauge invariance of the simulated state against errors is proposed. We further consider taking an overlap between the wave function of the resource state for lattice gauge theories and that of a parameterized product state, and we derive precise dualities between partition functions with insertion of defects corresponding to gauging higher-form global symmetries, as well as measurement-induced phases where states induced by a partial overlap possess different (symmetry-protected) topological orders. Measurement-assisted operators to dualize quantum Hamiltonians of lattice gauge theories and their noninvertibility are also presented. Published by the American Physical Society 2024

Okuda, Takuya↗

DOE OSTI2025

LatticeAnalytics: Strut-Level Visualization and Inspection of Additively Manufactured Lattice Structures

Additive manufacturing (AM) is revolutionizing the production of custom components with complex internal geometries, essential for high-performance applications in diverse fields such as medicine and defense. These AM parts optimize strength while minimizing weight by utilizing internal lattice structures consisting of large quantities of small interconnected struts. However, the complexity of these structures, combined with the challenges of using X-ray Computed Tomography (XCT) data, makes validation of part reliability difficult. This ultimately inhibits the development of novel parts for our collaborating material scientists. Here, we introduce LatticeAnalytics, a novel framework specifically designed for visual inspection of defects in these lattice structures. Our framework offers an end-to-end solution that includes the data management of XCT scans, enables remote access for geographically dispersed teams through a web-based dashboard, and incorporates novel visualizations. Our analysis is facilitated by a coarse alignment between the lattice’s nominal model, a spatial graph, and the XCT data. We employ a simple VR-based approach for fast and rough alignment, followed by an offline registration and identification of the struts. With the nodes and struts aligned and identified in the volume, our framework allows querying of subvolumes containing a single strut at multiple resolutions. This avoids computation over the entire lattice and also allow for easy parallelization of down-stream computations, such as strut-specific metrics. To depict a fast overview of the strut quality, we introduce two innovative visual encodings, crucial for our collaborators’ research in creating novel AM parts: the Contour View and the Roughness Map, which depict critical geometrical and surface features of individual struts in standardized two 2D views. We evaluated the integrated system through expert interviews. The feedback confirms the framework’s practicality and its effectiveness in enhancing current inspection workflows. It solves major bottlenecks for our collaborators, ultimately helping them create novel parts with advanced properties.

Miao, Haichao [Lawrence Livermore National Laborat↗

DOE OSTI2024

Non-chiral vertex operator algebra associated to Lorentzian lattices and Narain CFTs

Frenkel, Lepowsky, and Meurman constructed a vertex operator algebra (VOA) associated to any even, integral, Euclidean lattice. In the language of physics, these are examples of chiral conformal field theories (CFT). In this paper, we define non-chiral vertex operator algebra and some associated notions. We then give a construction of a non-chiral VOA associated to an even, integral, Lorentzian lattice and construct their irreducible modules. We obtain the moduli space of such modular invariant non-chiral CFTs based on even, self-dual Lorentzian lattices of signature (m,n) ( m , n ) assuming the validity of a technical result about automorphisms of the lattice. We finally show that Narain conformal field theories in physics are examples of non-chiral VOA. Our formalism helps us to identify the chiral algebra of Narain CFTs in terms of a particular sublattice and give us the decomposition of its partition function into sum of characters.

Singh, Ranveer Kumar (ORCID:000000026385704X)↗

DOE OSTI2025

Chiral rank-$k$ truncations for the multigrid preconditioner of Wilson fermions in lattice QCD

We present a modification to the setup algorithm for the multigrid preconditioner of Wilson fermions in lattice QCD. A larger number of test vectors than that used in conventional multigrid is generated by the smoother. This set of test vectors is then truncated by a singular value decomposition on the chiral components of the test vectors, which are subsequently used to form the prolongation and restriction matrices of the multigrid hierarchy. This modification is demonstrated to improve the convergence of linear equations on an anisotropic lattice with 𝑚𝜋 ≈ 280 MeV from the Hadron Spectrum Collaboration and an isotropic lattice with 𝑚𝜋 ≈ 220 MeV from the MILC Collaboration. The lattice volume dependence of the method is also examined.

Whyte, Travis [Jülich Supercomputing Center, Jülic↗