Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Laboratory procedures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

KBase Narrative - Lachnospiraceae sp. C1.1 genome

Narratives for The phenotype and genotype of fermentative prokaryotes This is the Narrative for Porphyromonadaceae sp. W3.11. A complementary Narrative for Lachnospiraceae sp. C1.1 is available here. This is the Narrative for Lachnospiraceae sp. C1.1. A complementary Narrative for Porphyromonadaceae sp. W3.11 is available here. Background and Isolation This Narrative and its complementary Narrative contain assembly and annotation of two bacterial isolates that were isolated by our laboratory from the rumen of a Holstein heifer. All procedures with animals have been approved by University of California Davis’s Institutional Animal Care and Use Committee. Rumen contents were collected through a rumen fistula and strained through two layers of cheesecloth into a bottle. The bottle was sealed to exclude air and maintained at 39°C. Contents were brought to the laboratory and bubbled under O2-free CO2 within 15 min. At the laboratory, serial dilutions were made with anaerobic dilution solution for Lachnospiraceae sp. C1.1 and propionibacterium diluent for Porphyromonadaceae sp. W3.11 (table S2). Aliquots (0.1 ml) of each dilution were injected into anaerobic bottle plates (1) containing 9 ml of LH medium (table S2). After incubation at 37°C for 7 days, isolated colonies were picked. Lachnospiraceae sp. C1.1 was picked from a bottle inoculated with a 104 dilution of rumen contents, and Porphyromonadaceae sp. W3.11 was picked from a bottle inoculated with a 103 dilution. After initial isolation, these organisms were purified by growing on anaerobic roll tubes (2) and picking isolated colonies. We performed de novo sequencing of Lachnospiraceae sp. C1.1 and Porphyromonadaceae sp. W3.11. Aliquots of liquid culture (9 and 1.5 ml, respectively) were collected by syringe and centrifuged (21,000g for 10 min at 4°C). Cell pellets were submitted to Molecular Research LP for DNA extraction, library preparation, and sequencing. After resuspending pellets in 180 µl of ATL buffer (Qiagen), DNA was extracted using the MagAttract HMW DNA Kit (Qiagen). DNA was eluted in 100 µl of AE buffer (Qiagen) and then cleaned using the DNEasy PowerClean Pro Cleanup Kit (Qiagen). DNA was then sheared using the Covaris g-TUBE (Covaris). Sequencing libraries were prepared using the SMRTbell Express Template Prep Kit 2.0 (Pacific Biosciences) and 1500 ng of the sheared and purified DNA. The SMRTbell libraries were size-selected (>6 Kb) using a BluePippin instrument (Sage Science) and 0.75% agarose gel. Libraries were then sequenced using the PacBio Sequel II (Pacific Biosciences) platform and a 30-hour movie time. Narrative Summary In these Narratives, we filtered low-quality reads using Trimmomatic (v0.36), assembled filtered reads with SPAdes (v3.15.3), and then checked completeness and contamination of the assembled genomes with CheckM (v1.0.18). Statistics for sequencing and assembly are in table S3. Using the assembled contigs (genomes), we called genes and annotated them. Protein-coding genes were called using Prodigal (v2.6.3) (3) locally or using KBase via RASTtk (v1.073), with identical results. Genes were annotated with KO IDs using KAAS (4). They were further annotated with pfam and TIGRFAM IDs using KBase and the Annotate Domains in a Genome app. We classified putative genes for hydrogenases using HydDB. Genes for 16S ribosomal RNA (rRNA) were called using RASTtk (v1.073) in KBase. The contigs (genomes) were analyzed to determine whether they belonged to new species. Taxonomy was assigned using GTDB-Tk (v1.7.0) in KBase. The identity of 16S rRNA genes to other organisms was found using EzBioCloud (5). Values of digital DNA-DNA hybridization (dDDH) were found with Type (Strain) Genome Server (6). These analyses suggest that Lachnospiraceae sp. C1.1 and Porphyromonadaceae sp. W3.11 represent novel species or genera. GTDB-Tk assigned Lachnospiracae sp. C1.1 to family Lachnospiraceae and genus NK4A144, which contains no type strains. It assigned Porphyromonadaceae sp. W3.11 to Porphyromonadaceae and genus Porphyromonas_A. Values of 16S rRNA identity and dDDH with respect to type strains were low (table S4). Although more phenotypic data are needed, available evidence supports assignment of genomes to new species or genera. Related publication Hackmann TJ, Zhang B. The phenotype and genotype of fermentative prokaryotes. Sci Adv. 2023 Sep 29;9(39):eadg8687. doi: 10.1126/sciadv.adg8687. Epub 2023 Sep 27. PMID: 37756392; PMCID: PMC10530074.

Hackmann, Timothy↗
DOE OSTI2020

Complete Round-Robin Hydrogen Gas Analysis Capability Comparison (Milestone 2.6)

The Department of Energy (DOE) is currently evaluating strategies for the extended dry storage of aluminum-clad spent nuclear fuel (ASNF). Part of this assessment concerns the extent of radiolytic molecular hydrogen (H2) generation from the aluminum cladding’s oxyhydroxide corrosion layers. Understanding this radiation-induced process and the factors effecting it (e.g., system conditions such as temperature and gaseous environment) are essential for the development of predictive computer models to support the Technical Considerations and Challenges for Extended (> 50 yrs) Dry Storage of ASNF program. To achieve this goal and ensure that the experimental data gathered by Task 2 (Oxyhydroxide Layer Radiolytic Gas Generation Resolution) research groups (Idaho National Laboratory and Savannah River National Laboratory) are consistent, a round-robin H2 analysis capability comparison was initiated. Here we present the results from said round-robin and conclude that despite differences in sample preparation, irradiation parameters, and analytical procedures, the measured data are sufficiently consistent between the two laboratories (= 15%).

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2022

Digestion processes and elemental analysis of oxide and sulfide solid electrolytes

Detailed elemental analysis is essential for a successful development and optimization of material systems and synthesis methods. This is especially relevant for Li- and Na-containing compounds, found in state-of-the-art and next-generation battery systems. Their materials’ properties and thus the final device performance strongly depend on the crystal structure, the stoichiometry, and defect chemistry, e.g., influencing charge carrier concentration and activation energies for vacancy transport. However, a detailed quantitative analysis of light elements in a heavy matrix, featuring a broad range of solubilities and vapor pressures, is often difficult and associated with large uncertainties and thus neglected in favor of just reporting the stoichiometry as “weighed in.” Here, in this work, we report several approaches to digest and dissolve various oxide and sulfide-based materials, used in next-generation Li batteries, for elemental analysis via optical emission spectroscopy. These include the most common solid electrolytes Li-La-Ti–O, a perovskite material (LLTO), and Li-La-Zr-O which has garnet structure (LLZO). Additionally, a facile thermal digestion process is reported for a surrogate sulfide solid electrolyte (Na 2 S). The digestion procedures reported here are suitable for almost any laboratory environment and, when applied, will improve understanding of the synthesis-structure–property correlations needed to advanced batteries with all solid-state configurations.

Malkowski, Thomas F.↗
DOE OSTI2020

Procedure for Creating, Reviewing, and Submitting Input Files into the Benchmark Library

Los Alamos National Laboratory (LANL) has a number of criticality benchmark input files, modeled for use with MCNP, developed and maintained by various organizations including the Nuclear Criticality Safety (NCS) Division, XCP-3, and XCP-5. The purpose of this procedure is to standardize input file creation, review, and maintenance. This procedure incorporates existing practices used by IRSN as documented in the original report and the translation from French in addition to practices used by the LANL NCS Division as documented in. The report relates to input files used for the validation of the continuous energy Monte Carlo code MCNP6 but is general enough to be extended to other codes. This report describes the procedure on how to prepare and use benchmarks (taken mainly from the ICSBEP Handbook) for the validation of calculation routes. In particular, this report describes the procedure to follow in the creation of the input files and their integration in the experimental validation databases.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

NREL 25-cm2 High-Pressure Low-Temperature Electrolysis Cell Hardware (Open Source)

This data resource describes an open-source cell hardware that enables low temperature electrolysis (LTE) testing at elevated pressures. Existing commercial options have several downsides when it comes to R&D testing. They are often not designed for repeated reassembly, may not be able to accommodate porous transport layers with different thicknesses, and do not give state-of-the-art performance. Therefore, this hardware was developed specifically with LTE R&D in mind and its design is being made available to the global LTE community. This work was planned and funded by the U.S. Department of Energy's H2NEW consortium (https://h2new.energy.gov/). The hardware design package (.zip file) details the drawings, auxiliary materials, and procedures required to fabricate, assemble, and operate the National Renewable Energy Laboratory's (NREL's) high-pressure low-temperature electrolysis cells. While the hardware itself—end plates, current collectors, flow fields, bolts and washers, tube fittings—is always the same, the assembly and operating procedures may change depending on the active materials being tested, especially for the membrane. Material-specific assembly and operating procedures will be posted to the H2NEW website as they are developed and validated. Disclaimer: The documents and drawings included in this download package describe a design for a low temperature electrolysis hardware that is intended to comply with leak testing according to ASME B31.1. Safe operation at ambient and elevated pressures is the sole responsibility of the end user, which should be evaluated on a case-by-case basis for each individual cell. Factors affecting the sealing capability may depend on, for example, machining quality, cell assembly components, operating conditions, and operating history. Operation at pressure should only be performed on qualified test stands by qualified operators. NREL/ALLIANCE FOR SUSTAINABLE ENERGY, LLC/DOE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND MAKES NO WARRANTY AS TO THE ACCURACY, COMPLETENESS, OR USEFULNESS OF ANY INFORMATION PROVIDED HEREIN. USE OF THIS PACKAGE IS AT THE USER’S OWN RISK.

08 HYDROGEN↗
DOE OSTI2025

The joys and jitters of high‐temperature calorimetry

Abstract High‐temperature calorimetry (HTC) originated in the 20th century as a niche method to enable measurements not easily accomplished with acid solution calorimetry, combustion calorimetry, vapor pressure, or EMF methods. Over time, HTC has evolved into a versatile approach to accurately quantify formation, phase transition, surface and interfacial enthalpies of a wide range of materials including minerals and refractory inorganic compounds. This evolution has been the result of numerous adjustments to experimental setups and procedures, followed by rigorous testing. The commercial availability and the scientific success of this technique have led to an increase in the number of laboratories applying HTC. However, the knowledge acquired by researchers over the past 70 years is scattered throughout the literature or only available as laboratory internal documentation and personal experience. This publication is a collaborative effort among several leading HTC laboratories to summarize and unify current state‐of‐the‐art HTC techniques and procedures. The text starts by summarizing various HT techniques that are commonly used for readers with an interest in HTC in general. It is then directed toward HTC users and includes a brief section on data evaluation procedures as well as a comprehensive compilation of reference data utilizing molten sodium molybdate and lead borate solvents. Finally, for experienced HTC users, an in‐depth discussion of some common difficulties and a discussion of uncertainties are presented.

Scharrer, Manuel [Navrotsky Eyring Center for Mate↗
DOE OSTI2023

Modeling support for the development of material surveillance specimens and procedures

This report describes modeling and simulation activities performed at Argonne National Laboratory supporting the development of passively actuated mechanical test articles for material surveillance in Molten Salt Reactors (MSRs). These test articles are a critical technology in formulating material surveillance programs for future MSRs to monitor the degradation in the structural properties of the materials in critical plant components. The main activity described in this report is the development of a method for inferring the amount of mechanical damage a test article has experienced during some duration of exposure to plant thermal and environmental conditions, using only mechanical test data collected from the test articles before and after exposure. The basic approach is to develop a model of the test article, including a description of mechanical degradation through continuum damage mechanics, and then use this model to cast the problem of inferring mechanical degradation in the test article materials into a shooting problem for a set of ordinary differential equations. We can then solve the shooting problem to determine the amount of damage accumulated in the sample. The report also details a few miscellaneous simulation studies completed at Argonne to support the development of the test articles themselves at Idaho National Laboratory.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2021

Home Energy Professionals Certifications ISO/IEC 17024: 2021 Policies and Procedures Manual

The U.S. Department of Energy (DOE) enlisted its National Renewable Energy Laboratory (NREL) to coordinate the development of a framework for new certifications in the weatherization and home performance industry. The Home Energy Professional certifications support DOE's Weatherization Assistance Program (WAP) and the broader residential home performance industry through the credentialing process of defined job task analysis for energy auditors and quality control inspectors. The HEP certifications are not intended to supplant or infringe upon any existing industry-recognized credentials, however, the WAP and the home performance industry have utilized the advanced HEP certifications to promote quality work and standardized job task analysis since 2010. On an ongoing basis, NREL brings industry practitioners and subject matter experts together to develop, review, and revise the certification schemes in accordance with the International Organization for Standardization (ISO)/International Electrotechnical Commission (IEC) 17024 standard, "Conformity assessment - General requirements for bodies operating certification of persons" (ISO/IEC 17024). This handbook covers the policies and procedures for the process of developing, maintaining, and validating the certification schemes. Each policy and procedure includes the relevant ISO/IEC 17024 section at the beginning.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2025

Cost‐Effective and Scalable Approach for the Separation and Direct Cathode Recovery from End‐of‐Life Li‐Ion Batteries

Li-ion battery recycling presents a promising opportunity to decrease dependence on foreign sources of materials and harvest precious materials within the United States. Herein, a superior complete direct recycling process on individual end-of-life cells is reported where the recovered high-purity cathode active material, as well as electrolyte salt Li hexafluorophosphate (LiPF 6 ) can be reused without significant processing. This new process utilizes a series of mechanical separation steps that enable the separation of the cathode and anode active materials while they are still attached to their current collectors. Using this type of process can significantly reduce metal contamination and enable a clean cathode that can be directly recycled. The process if implemented commercially can greatly reduce the environmental burden of batteries as the greenhouse gas emissions of 8.25 kg CO 2 e kg −1 from the direct recycling process are 64% lower compared to those from virgin production of cathode material. During electrochemical testing of the recovered LiNi 0.6 Mn 0.2 Co 0.2 O 2 a discharge capacity of ≈160 mAh g −1 and good cyclability of over 250 cycles at 0.33C are achieved. This success paves a new pathway to explore and optimize existing Li-ion battery recycling procedures.

electrolyte reuse↗
DOE OSTI2025

A Robust Data-Driven Approach for Mechanical Serial Sectioning

Mechanical serial sectioning (MSS) provides detailed microstructural information across large length scales. By repeatedly removing thin layers of material and imaging the exposed surface, a 3D representation of a specimen’s internal structure can be constructed, enabling failure analysis and feature identification that are otherwise inaccessible via conventional 2D or nondestructive evaluation techniques. Achieving consistent and accurate material removal can be challenging due to system variability, requiring an experienced operator to manually adjust parameters, prolonging data collection times and necessitating post-processing routines to standardize the data. Here, to address these challenges, this paper presents the employment of a one-step model predictive control (MPC) framework tailored to a run-to-run (R2R) controller. The R2R-MPC controller automates the parameter selection process, improving the consistency of material removal through iterative feedback for disturbance rejection and accurate tracking of the target removal rate. Using a data-driven approach, the controller robustly adapts to changing material characteristics. The effectiveness of the R2R-MPC controller is demonstrated through simulation and experimental results and compared to previous data collection procedures.

3D Materials Science↗
DOE OSTI2024

Evaluations for Nuclear Criticality Safety Program 12 C, 139 La, minor actinides, 235 U [Slides]

For light nuclei, preliminary work extends the evaluation from 6.5 MeV to ~ 10 MeV. For 139 La, the team delivered full evaluation in fast region to ORNL, including covariances. For sup>235 U, RPI data simulations, the team performed simulations and showed some improvement for neutrons below 5 MeV. Some of the changes needed for more improvement might not be supported by the current format. Some of the changes above 12 MeV to account for the angular distribution of preequilibrium neutrons require a change in the PFNS evaluation procedure.

235U re-evaluation↗
DOE OSTI2026

Closure models for the feedback of energetic particles on plasma turbulence

Energetic particles interact with the plasma surrounding them, resonating with certain types of plasma waves to stabilize them while destabilizing others, and changing the character of the background turbulence in ways that have not been fully quantified or understood. Interaction with the turbulent background plasma is key to the acceleration of many types of energetic particles including high-energy cosmic rays, solar energetic particles, and pick-up ions. The acceleration of particles is a process that would ideally be described by a kinetic model, a type of model that follows a probability distribution function (PDF) for all particles in 7-dimensional (x, y, z, v x , v y , v z , t) space. Because of the high dimensionality of a kinetic model, simulations that solve kinetic equations use the largest computational resources currently available, and are yet unable to simulate a realistic number of particles, reach the large scales necessary for astrophysical problems, and use high-precision numerical methods. Two available alternatives to kinetic plasma models have been explored for this problem, with limited success. One is a multi-fluid model produced by a cumulant discarding closure, which evolves coupled equations for the velocity, magnetic field, and internal energy for both the background plasma and the fluid of energetic particles. However, simulations that solve multi-fluid magnetohydrodynamic (MHD) equations are able to include the interaction with energetic particles only in crude ways, typically as an add-on pressure term. The second alternative is to use a hybrid method to couple a fluid description of the background plasma to a kinetic model or a Fokker–Planck model for the energetic particles. These methods are hampered by the physical modeling of the coupling. In this work, we develop a new model, which follows the PDF for all particles; this can be viewed as a step toward physical realism above a multi-fluid MHD model, while also being more computationally efficient than a kinetic model. The equations we develop model both the background plasma and the energetic particles self-consistently. Over the last decade, similar PDF methods have been developed to a high level of sophistication to model reactive flows and turbulent combustion for engineering applications. For treatment of the feedback of the energetic particles on a background plasma, a PDF closure approach should evaluate the mean characteristics, including the density, with better statistical quality than will particle-sampling procedures.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Laboratory and In-Pile Testing of a Fiber Optic Pressure Sensor

The development, testing and deployment of a fiber-optic-based extrinsic Fabry-Perot pressure sensor is discussed. The details of design and fabrication procedure is discussed and the methodology for design decisions is provided. Results from laboratory-based testing and calibration is provided as-well-as preliminary data from in-pile testing in the Transient Reactor Test Facility.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2024

Parameter extraction approaches for compact modeling of thermoelectric modules

Thermoelectric (TE) cooling has experienced rapid advancements with the foundational understanding of TE materials. TE modules, compact and lightweight devices, have become the prevalent approach for implementing TE technologies. Accurately quantifying TE physical parameters (Seebeck coefficient α, thermal conductivity κ, and thermal resistance ρ) is challenging due to the dynamic temperature changes in operation. Furthermore, extracting lumped property parameters is crucial for designing energy systems using TE modules. Existing research has several limitations, such as lack of comparative analysis between prevalent formulae, reliance on potentially inaccurate vendor-supplied data, disregard for fundamental assumptions, and absence of empirical measurements. Further, this study addresses these gaps by conducting TE material characterization, comparing three existing formulae using vendor datasheets, designing a laboratory test facility for model validation and refinement, and outlining a structured data extraction procedure. The study's novelty lies in multiple key contributions: (1) a detailed comparative analysis of existing formulae for extracting TE property parameter; (2) executing experimental work in a laboratory setting to validate the model and elucidate its limitations; (3) highlighting potential risks; (4) clarifying possible assumptions from both material and engineering perspectives; and (5) considering temperature differential impacts. This comprehensive approach addresses the current research gaps and provides valuable insights into the design and application of TE modules in various energy systems.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Evaluation of SNOLAB background mitigation procedures through the use of an ICP-MS based dust monitoring methodology

Dust particulate fallout on materials in use for rare-event searches is a concerning source of radioactive backgrounds due to the presence of the naturally occurring radionuclides 40 K, 232 Th, 238 U, and their progeny in dust. Much effort is dedicated to inform radioactive backgrounds from dust and evaluate the efficacy of mitigation procedures. A great portion of such effort relies on fallout models and assumed dust composition. Here, in this work, an ICP-MS based methodology was employed for a direct determination of fallout rates of radionuclides and stable isotopes of interest from dust particulate at the SNOLAB facility. Hosted in an active mine, the SNOLAB underground laboratory strives to maintain experimental areas at class 2000 cleanroom level. This work validates the mitigation procedures in place at SNOLAB and informs dust backgrounds during laboratory activities. Fallout rates of major constituents of the local rock were measured two to three orders of magnitude lower in the clean experimental areas compared to non-clean transition areas from the mine to the laboratory. An increase of approximately two orders of magnitude in the fallout rate of stable Pb isotopes was determined in an experimental area during activities involving handling of Pb bricks. Increased 40 K, 232 Th, and 238 U fallout rates were measured in clean experimental areas during activities generating particulate.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2020

Y-12 Groundwater Protection Program Groundwater and Surface Water Sampling and Analysis Plan (CY 2021)

This plan provides a description of the groundwater and surface water quality monitoring activities planned for calendar year (CY) 2021 at the U.S. Department of Energy Y-12 National Security Complex (Y-12) that will be managed by the Y-12 Groundwater Protection Program (GWPP). Groundwater and surface water monitoring is performed by the GWPP. Groundwater and surface water monitoring will be performed in three hydrogeologic regimes at Y-12: the Bear Creek Hydrogeologic Regime (Bear Creek Regime), the Upper East Fork Poplar Creek Hydrogeologic Regime (East Fork Regime), and the Chestnut Ridge Hydrogeologic Regime (Chestnut Ridge Regime). The Bear Creek and East Fork regimes are located in Bear Creek Valley and the Chestnut Ridge Regime is located south of Y-12. Additional surface water monitoring will be performed north of Pine Ridge along the boundary of the Oak Ridge Reservation. The following sections of this report provide details regarding the CY 2021 groundwater and surface water monitoring activities. Section 2 describes the monitoring locations in each regime and the processes used to select the sampling locations. A description of the field measurements and laboratory analytes is provided in Section 3. Sample collection methods and procedures are described in Section 4, and Section 5 lists the documents cited for more detailed operational and technical information. The narrative sections of the report reference several appendices. Figures (maps and diagrams) and tables (excluding a data summary table presented in Section 4) are in Appendix A and Appendix B, respectively. Groundwater Monitoring Schedules (when issued throughout CY 2021) will be inserted in Appendix C, and addenda to this plan (if issued) will be inserted in Appendix D. Laboratory requirements (bottle lists, holding times, etc.) are provided in Appendix E, and an approved Waste Management Plan is provided in Appendix F. Modifications to the CY 2021 monitoring program may be necessary during implementation. Changes in programmatic requirements may alter the analytes specified for selected monitoring wells or may add or remove wells from the planned monitoring network. Each modification to the monitoring program will be approved by the Y-12 GWPP manager and documented as an addendum to this sampling and analysis plan.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

July 2022 Semiannual Saltstone Toxicity Characteristic Leaching Procedure (TCLP) Results

The aqueous waste from Tank 50 (salt solution) is sampled semiannually for transfers to the Saltstone Production Facility (SPF). Salt solution is treated at SPF and disposed of in the Salstone Disposal Facility (SDF). Per request of customer, X-TTR-Z-00025, Revision 0, two SDF waste form (salstone) samples were prepared in the Savannah River National Laboratory (SRNL) from the Tank 50 Waste Acceptance Criteria (WAC) sample and Z-Area premix material for the July 2022 Semiannual Toxicity Characteristic Leaching Procedure (TCLP) samples. One sample contained a Full Premix which included 10:45:45 (by weight) of cement, slag and fly ash. The second sample contained 60:40 (by weight) of slag and fly ash only referred to as the "Cement-Free grout sample." Results from this technical report support Task 2: 'Grout Leaching Analyses' of the Task Technical Request (TTR) prepared by Savannah River Mission Completion (SRMC). After at least 28 days cured, a sample of each of the SDF waste forms was collected and shipped to a certified laboratory for analysis using Toxicity Characteristic Leaching Procedure (TCLP). The July 2022 semiannual salstone (Full Premix) and the Cement-Free grout samples met the South Carolina (SC) Code of Regulations for Hazardous Waste Management Regulations (HWMR) 61-79.261.24 and 61-79-268.48 requirements for the non-hazardous waste form with respect to Resource Conservation and Recovery Act (RCRA) metals and Underlying Hazardous Constituents (UHCs), and also met the SPF WAC that was in effect at the time of the tank sampling.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2025

April 2025 Semiannual Composite Salt Waste Processing Facility (SWPF) Decontaminated Salt Solution (DSS) Toxicity Characteristic Leaching Procedure (TCLP) Results

The aqueous waste from the Salt Waste Processing Facility is sampled semiannually for transfers to the Saltstone Production Facility. Salt solution is treated at the Saltstone Production Facility and disposed of in the Saltstone Disposal Facility. Per request of customer, X-TTR-Z-00027, Revision 0, one Saltstone Disposal Facility waste form was prepared at Savannah River National Laboratory using the Salt Waste Processing Facility Decontaminated Salt Solution and Z-area premix material for the April 2025 semiannual Toxicity Characteristic Leaching Procedure sample. The sample contained 60:40 (by weight) of slag and fly ash (referred to as the “Cement-Free grout sample”). Results from the technical report support Task 2: ‘Grout Leaching Analyses’ of the Task Technical Request prepared by Savannah River Mission Completion. At 43 days cured, the Saltstone sample was collected and shipped to a certified laboratory for analysis using the Toxicity Characteristic Leaching Procedure. The April 2025 semiannual Cement-Free grout sample met the South Carolina Code of Regulations for Hazardous Waste Management Regulations 61-79.261.24 and 61-79.268.48 requirements for a non-hazardous waste form with respect to the Resource Conservation and Recovery Act metals and Underlying Hazardous Constituents, and met the Saltstone Production Facility Waste Acceptance Criteria that was in effect at the time of the sample collection at the Salt Waste Processing Facility.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗