Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LOGICAL DESIGN”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Washout circuit design for multi-degrees-of-freedom moving base simulators.

A mathematical framework is presented for designing logic to accept motion-dependent parameters from a simulation, attenuating them ('washing them out'), and generating appropriately limited drive signals. This framework is sufficiently general to encompass six-degree-of-freedom simulators with large motion capability. Emphasis is placed on preserving certain motion cue relations (such as those that would be observed in coordinated flight). Strategies for simulating side forces via tilts are shown. Finally, several specific circuits are shown. These circuits have proven to be readily adaptable to a variety of moving-base simulators.

Conrad, B.↗

Digital adaptive flight controller development

The development of a digital adaptive flight control algorithm is described that combines a weighted least squares estimator with optimal linear regulator control logic designed to minimize a quadratic model following performance index. Very promising results for a typical fighter aircraft's trajectory over six distinct flight conditions are reported.

Kaufman, H.↗

A Kalman filter for the Stoland system

A simple Kalman filter for potential use in STOL navigation systems is described. The mathematical formulation of all the elements of the filter, its initialization and overall operation are presented. Simulation results show that a typical approach flight to landing, the Kalman filter has much smaller errors during navigation on TACAN data and during transition from TACAN to MODILS data than a complementary filter. Summary type flow charts of the Kalman filter logic designed for the Sperry 1819A computer are presented. Also, the memory and real time requirements of the Kalman filter and complementary filter are described. The Kalman filter is shown to gain its superior performance at the expense of real time and memory required in the onboard computer.

Schmidt, S. F.↗

Apollo experience report: Guidance and control systems: Automated control system for unmanned mission AS-201

The Apollo command module heat shield and Apollo command and service module/Saturn launch vehicle structural integrity were evaluated in an unmanned test flight. An automated control system was developed to provide the mission event sequencing, the real-time ground control interface, and the backup attitude reference system for the unmanned flight. The required mission events, the design logic, the redundancy concept, and the ground-support-equipment concept are described and some development problem areas are discussed. The mission event time line and the real-time ground command list are included to provide an outline of the control system capabilities and requirements. The mission was accomplished with the automated control system, which functioned without flight anomalies.

Holloway, G. F.↗

An advanced combustor analytical design procedure and its application in the design and development testing of a premix/prevaporized combustion system

Due to the protracted time and relatively high monetary expenditures associated with empirical design procedures, AiResearch has placed considerable emphasis on the development and use of combustor analytical models to augment the existing design techniques. A brief account of the semi-empirical design procedure is given, followed by the description of six analytical computer models. An advanced combustor design logic based upon these models is presented. A brief description of a premix/prevaporized combustion system and correlation with the models is given.

Reynolds, R. S.↗

CADAT place-and-routine in two dimensions

CADAT place-and-route-in-two dimensions program (PR2D) is standard-cell automatic-layout program for generating large-scale-integrated/metal-oxidesemiconductor (LSI/MOS) arrays. PR2D translates logic designer's cell interconnection requirements into physically-defined MOS chip. PR2D reads input data, searches pin data file for data on each pattern type, generates placement of patterns, and interconnects patterns. As output, it generates artwork for layouts.

Source record↗

Wide field of view laser beacon system for three-dimensional aircraft position measurement

This paper presents a new wide field of view laser beacon system for measurement, in three dimensions, of aircraft or other remote objects. The system is developed for aircraft collision hazard warning independent of ground-based hardware, as well as for flight research, helicopter-assisted construction and rescue, and robotic manipulation applications. Accurate information describing the relative range, elevation, and azimuth of the aircraft are generated by the sweep of a low-power fan-shaped rotating laser beacon past an array of optical detectors. The system achieves a wide angle of acceptance of laser beacon light through use of compound parabolic concentrators, which collimate the light for spectral filtering to minimize solar interference. An on-board microprocessor system converts the pulse sequence to aircraft position in real time. System reliability and performance are enhanced through narrow pass filtering of the pulse signals, digital logic design to mask spurious signals, and adaptive modulation of trigger threshold levels.

Sweet, L. M.↗

Programmable controller system for wind tunnel diversion vanes

A programmable controller (PC) system automatic sequence control, which acts as a supervisory controller for the servos, selects the proper drives, and automatically sequences the vanes, was developed for use in a subsonic wind tunnel. Tunnel modifications include a new second test section (80 ft x 100 ft with a maximum air speed capability of 110 knots) and an increase in maximum velocity flow from 200 knots to 300 knots. A completely automatic sequence control is necessary in order to allow intricate motion of the 14 triangularly arranged vanes which can be as large as 70 ft high x 35 ft wide and which require precise acceleration and deceleration control. Rate servos on each drive aid in this control, and servo cost was minimized by using four silicon controlled rectifier controllers to control the 20 dc drives. The PC has a programming capacity which facilitated the implementation of extensive logic design. A series of diagrams sequencing the vanes and a block diagram of the system are included.

King, R. F.↗

An interactive wire-wrap board layout program

An interactive computer-graphics-based tool for specifying the placement of electronic parts on a wire-wrap circuit board is presented. Input is a data file (currently produced by a commercial logic design system) which describes the parts used and their interconnections. Output includes printed reports describing the parts and wire paths, parts counts, placement lists, board drawing, and a tape to send to the wire-wrap vendor. The program should reduce the engineer's layout time by a factor of 3 to 5 as compared to manual methods.

Schlutsmeyer, A.↗

Shortcomings in ground testing, environment simulations, and performance predictions for space applications

This paper addresses the issues involved in radiation testing of devices and subsystems to obtain the data that are required to predict the performance and survivability of satellite systems for extended missions in space. The problems associated with space environmental simulations, or the lack thereof, in experiments intended to produce information to describe the degradation and behavior of parts and systems are discussed. Several types of radiation effects in semiconductor components are presented, as for example: ionization dose effects, heavy ion and proton induced Single Event Upsets (SEUs), and Single Event Transient Upsets (SETUs). Examples and illustrations of data relating to these ground testing issues are provided. The primary objective of this presentation is to alert the reader to the shortcomings, pitfalls, variabilities, and uncertainties in acquiring information to logically design electronic subsystems for use in satellites or space stations with long mission lifetimes, and to point out the weaknesses and deficiencies in the methods and procedures by which that information is obtained.

Stassinopoulos, E. G.↗

Reactive system verification case study: Fault-tolerant transputer communication

A reactive program is one which engages in an ongoing interaction with its environment. A system which is controlled by an embedded reactive program is called a reactive system. Examples of reactive systems are aircraft flight management systems, bank automatic teller machine (ATM) networks, airline reservation systems, and computer operating systems. Reactive systems are often naturally modeled (for logical design purposes) as a composition of autonomous processes which progress concurrently and which communicate to share information and/or to coordinate activities. Formal (i.e., mathematical) frameworks for system verification are tools used to increase the users' confidence that a system design satisfies its specification. A framework for reactive system verification includes formal languages for system modeling and for behavior specification and decision procedures and/or proof-systems for verifying that the system model satisfies the system specifications. Using the Ostroff framework for reactive system verification, an approach to achieving fault-tolerant communication between transputers was shown to be effective. The key components of the design, the decoupler processes, may be viewed as discrete-event-controllers introduced to constrain system behavior such that system specifications are satisfied. The Ostroff framework was also effective. The expressiveness of the modeling language permitted construction of a faithful model of the transputer network. The relevant specifications were readily expressed in the specification language. The set of decision procedures provided was adequate to verify the specifications of interest. The need for improved support for system behavior visualization is emphasized.

Crane, D. Francis↗

An Exobiological Strategy for Mars Exploration

The idea of searching for evidence of life on Mars may strike some as far-fetched, even fanciful. But there is a compelling logic to such a quest, as well as an equally compelling excitement. Early environments were apparently sufficiently similar on Mars and Earth, and life arose so rapidly on Earth once conditions became clement, that emergence of life on both planets at that time is scarcely less plausible than emergence on only one. Furthermore, although a fossil on Mars might seem at first like a proverbial needle in a haystack, experience on Earth tell us that if we know where to look, finding evidence of ancient life is not particularly difficult, especially when one considers that such evidence can be relatively widely disseminated in the form of chemical or isotopic signatures. The key is to recognize that the search for ancient life on Mars will involve a logically designed sequence of missions, each of which will focus on defining ever more closely where and how biosignatures may be found. Although one can never rule out a chance discovery, this quest should not be approached as one that will yield to a single, expeditious mission. (In fact, the proposed strategy lends itself particularly well to the use of a series of relatively small, inexpensive spacecraft, rather than a single flagship-class mission). The search for life on Mars will take time and commitment, but the reward could be a discovery of inestimable importance, not just to science, but to humanity as a whole.

Source record↗

Reconfigurable Computing Concepts for Space Missions: Universal Modular Spares

Computing hardware for control, data collection, and other purposes will prove many times over crucial resources in NASA's upcoming space missions. Ability to provide these resources within mission payload requirements, with the hardiness to operate for extended periods under potentially harsh conditions in off-World environments, is daunting enough without considering the possibility of doing so with conventional electronics. This paper examines some ideas and options, and proposes some initial approaches, for logical design of reconfigurable computing resources offering true modularity, universal compatibility, and unprecedented flexibility to service all forms and needs of mission infrastructure.

Patrick, M. Clinton↗

Radiation tolerant combinational logic cell

A system has a reduced sensitivity to Single Event Upset and/or Single Event Transient(s) compared to traditional logic devices. In a particular embodiment, the system includes an input, a logic block, a bias stage, a state machine, and an output. The logic block is coupled to the input. The logic block is for implementing a logic function, receiving a data set via the input, and generating a result f by applying the data set to the logic function. The bias stage is coupled to the logic block. The bias stage is for receiving the result from the logic block and presenting it to the state machine. The state machine is coupled to the bias stage. The state machine is for receiving, via the bias stage, the result generated by the logic block. The state machine is configured to retain a state value for the system. The state value is typically based on the result generated by the logic block. The output is coupled to the state machine. The output is for providing the value stored by the state machine. Some embodiments of the invention produce dual rail outputs Q and Q'. The logic block typically contains combinational logic and is similar, in size and transistor configuration, to a conventional CMOS combinational logic design. However, only a very small portion of the circuits of these embodiments, is sensitive to Single Event Upset and/or Single Event Transients.

Maki, Gary R.↗

NASA Tech Briefs, February 2003

opics covered include: Integrated Electrode Arrays for Neuro-Prosthetic Implants; Eroding Potentiometers; Common/Dependent-Pressure-Vessel Nickel-Hydrogen Batteries; 120-GHz HEMT Oscillator With Surface-Wave-Assisted Antenna; 80-GHz MMIC HEMT Voltage-Controlled Oscillator; High-Energy-Density Capacitors; Microscale Thermal-Transpiration Gas Pump; Instrument for Measuring Temperature of Water; Improved Measurement of Coherence in Presence of Instrument Noise; Compact Instruments Measure Helium-Leak Rates; Irreversible Entropy Production in Two-Phase Mixing Layers; Subsonic and Supersonic Effects in Bose-Einstein Condensate; Nanolaminate Mirrors With "Piston" Figure-Control Actuators; Mixed Conducting Electrodes for Better AMTEC Cells; Process for Encapsulating Protein Crystals; Lightweight, Self-Deployable Wheels; Grease-Resistant O Rings for Joints in Solid Rocket Motors; LabVIEW Serial Driver Software for an Electronic Load; Software Computes Tape-Casting Parameters; Software for Tracking Costs of Mars Projects; Software for Replicating Data Between X.500 and LDAP Directories; The Technical Work Plan Tracking Tool; Improved Multiple-DOF SAW Piezoelectric Motors; Propulsion Flight-Test Fixture; Mechanical Amplifier for a Piezoelectric Transducer; Swell Sleeves for Testing Explosive Devices; Linear Back-Drive Differentials; Miniature Inchworm Actuators Fabricated by Use of LIGA; Using ERF Devices to Control Deployments of Space Structures; High-Temperature Switched-Reluctance Electric Motor; System for Centering a Turbofan in a Nacelle During Tests; Fabricating Composite-Material Structures Containing SMA Ribbons; Optimal Feedback Control of Thermal Networks; Artifacts for Calibration of Submicron Width Measurements; Navigating a Mobile Robot Across Terrain Using Fuzzy Logic; Designing Facilities for Collaborative Operations; and Quantitating Iron in Serum Ferritin by Use of ICP-MS.

Source record↗

Singapore's Zero-Energy Building's daylight monitoring system

A setup to monitor the daylighting performance of different glazing types in Singapore is presented. The glazing is installed in the facade of four dedicated testing chambers in BCAA's Zero Energy Building in Singapore. These test rooms are equipped with sensors that both record illuminances on the work plane, and luminances as seen by occupants. The physical and logical design of the monitoring system is presented. Criteria to assess the daylighting performance are introduced, and initial results of the work in progress are presented.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Adiabatic quantum-flux-parametron cell library adopting minimalist design

We herein build an adiabatic quantum-flux-parametron (AQFP) cell library adopting minimalist design and a symmetric layout. In the proposed minimalist design, every logic cell is designed by arraying four types of building block cells: buffer, NOT, constant, and branch cells. Therefore, minimalist design enables us to effectively build and customize an AQFP cell library. The symmetric layout reduces unwanted parasitic magnetic coupling and ensures a large mutual inductance in an output transformer, which enables very long wiring between logic cells. We design and fabricate several logic circuits using the minimal AQFP cell library so as to test logic cells in the library. Moreover, we experimentally investigate the maximum wiring length between logic cells. Finally, we present an experimental demonstration of an 8-bit carry look-ahead adder designed using the minimal AQFP cell library and demonstrate that the proposed cell library is sufficiently robust to realize large-scale digital circuits.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗