SEARCH · Engineering Papers
Results for “LEAD OXIDES”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Comparison of Pt-BaO/Al 2 O 3 and Pt-CeO 2 /Al 2 O 3 for NOx storage and reduction: Impact of cycling frequency
NOx reduction under net lean and near-stoichiometric conditions was carried out on Pt/Al 2 O 3 , Pt/CeO 2 /Al 2 O 3 and Pt/BaO/Al 2 O 3 washcoated monoliths to compare performance features and identify reaction pathways. The impact of the storage components (BaO, CeO 2 ) on the NOx conversion and byproduct (NH 3 and N 2 O) yields was quantified for a range of feed temperatures, reductant types (H 2 , and C 3 H 6 ), O 2 feed concentrations, and cycle times. The NOx storage functionality is essential for NOx reduction under net lean conditions while the oxygen storage functionality promotes NOx reduction for near-stoichiometric conditions. NOx conversion by H 2 under lean conditions is dependent on the NOx storage capacity of the catalyst, with Pt/CeO 2 /Al 2 O 3 and Pt/BaO/Al 2 O 3 exhibiting the highest NOx conversion below and above 300 °C, respectively. High NOx conversion is achieved over Pt/CeO 2 /Al 2 O 3 for anaerobic rich feeds at temperatures above 400 °C. Increasing the O 2 feed concentration enhances NOx conversion over Pt/CeO 2 /Al 2 O 3 below 400 °C but inhibits NOx conversion above 400 °C. The former is attributed to promotion of NO oxidation leading to NOx storage while the latter is attributed to O 2 inhibition of NO decomposition/reduction. Shorter cycle times increase the NOx conversion with C 3 H 6 as reductant over Pt/BaO/Al 2 O 3 under lean conditions and over PCA for the near-stoichiometric feed. The findings confirm that improved NOx storage utilization is mainly responsible for NOx conversion enhancement. A ceria redox pathway has only a secondary effect on NOx conversion under excess O 2 .
Fibroblast growth factor 19 improves cardiac function and mitochondrial energy homoeostasis in the diabetic heart
In diabetic cardiomyopathy, mitochondrial fatty acid oxidation dominates over mitochondrial glucose oxidation, leading to metabolic disturbances. Fibroblast growth factor 19 (FGF19) acts as a metabolic regulator and may have a cardioprotective role on diabetic cardiomyopathy. In this study, we investigated the effects of FGF19 on energy metabolism. FGF19 treatment of diabetic hearts exhibited higher glucose uptake and lower lipid profiles, suggesting changes in energy metabolism. The protective effects of FGF19 prevented ventricular dysfunction in diabetic hearts and improved mitochondrial function by the upregulation of PGC-1α expression. On the other side, knockdown of PGC-1α by siRNA attenuated the effects of FGF19 on the enhancement of mitochondrial function and energy efficiency. Taken together, these results show that FGF19 exhibited improved mitochondrial efficiency, which might be associated with higher cardiac contractility in diabetic hearts. It is also of note that modulation of PGC-1α, which is responsible for the activation by FGF19, may be a therapeutic target for diabetic cardiomyopathy.
On the synthesis, characterization and magnetic properties of two new phases discovered in the PbO–Fe{sub 2}O{sub 3}–P{sub 2}O{sub 5} system
The PbFe{sub 3}O(PO{sub 4}){sub 3} powder compound was studied by means of X-ray diffraction (XRD) from 300 to 6 K, electron-probe microanalysis (EPMA) coupled with wavelength dispersion spectroscopy (WDS), calorimetric (DSC and specific heat) and magnetic properties measurements. Magnetization, magnetic susceptibility and specific heat measurements carried out on PbFe{sub 3}O(PO{sub 4}){sub 3} powders firmly establish a series of three ferromagnetic (FM)-like second order phase transitions spanned over the 32–8 K temperature range. Discrepancies between magnetization and specific heat data obtained in PbFe{sub 3}O(PO{sub 4}){sub 3} powders and single crystals are highlighted. A first extraction of the critical exponents (β,γ,δ) was performed by ac magnetic susceptibility in both PbFe{sub 3}O(PO{sub 4}){sub 3} powders and single crystals and the values were found to be consistent with mean-field theory. Further exploration of the PbO–Fe{sub 2}O{sub 3}–P{sub 2}O{sub 5} system led to the discovery of a new langbeinite phase, Pb{sub 1.5}Fe{sub 2}(PO{sub 4}){sub 3}, the crystal structure of which was solved by room temperature single crystal XRD (P2{sub 1}3, Z=4, a=9.7831(2) Å). This phase does not undergo any structural phase transition down to 6 K nor any kind of long range ordering down to 2 K. - Graphical abstract: Three ferromagnetic-like phase transitions discovered in the new compound PbFe{sub 3}O(PO{sub 4}){sub 3} by specific heat and ZFC/FC magnetization measurements. - Highlights: • Three FM-like second order phase transitions in PbFe{sub 3}O(PO{sub 4}){sub 3} powders. • Critical exponents (β,γ,δ) in PbFe{sub 3}O(PO{sub 4}){sub 3} consistent with mean-field behavior. • Discovery of a new langbeinite phase, Pb{sub 1.5}Fe{sub 2}(PO{sub 4}){sub 3}.
New quenched-in fluorite-type materials in the Bi{sub 2}O{sub 3}-La{sub 2}O{sub 3}-PbO system: Synthesis and complex phase behaviour up to 750 {sup o}C
Research highlights: {yields} New quenched-in fluorite-type materials synthesised by solid state reaction. {yields} Compositions (BiO{sub 1.5}){sub 0.94-x}(LaO{sub 1.5}){sub 0.06}(PbO){sub x}, x = 0.02, 0.03, 0.04 and 0.05. {yields} Variable-temperature X-ray diffraction data collected in the range of 400-750 {sup o}C. {yields} Fluorite-type structure transforms during heating, complex phase behaviour characterised. {yields} Tetragonal, monoclinic, rhombohedral and bcc phases identified. -- Abstract: New quenched-in fluorite-type materials with composition (BiO{sub 1.5}){sub 0.94-x}(LaO{sub 1.5}){sub 0.06}(PbO){sub x}, x = 0.02, 0.03, 0.04 and 0.05, were synthesised by solid state reaction. The new materials undergo a number of phase transformations during heating between room temperature and 750 {sup o}C, as indicated by differential thermal analysis. Variable temperature X-ray diffraction performed on the material (BiO{sub 1.5}){sub 0.92}(LaO{sub 1.5}){sub 0.06}(PbO){sub 0.02} revealed that the quenched-in fcc fluorite-type material first undergoes a transformation to a {beta}-Bi{sub 2}O{sub 3}-type tetragonal phase around 400 {sup o}C. In the range 450-700 {sup o}C, {alpha}-Bi{sub 2}O{sub 3}-type monoclinic, Bi{sub 12}PbO{sub 19}-type bcc and {beta}{sub 1}/{beta}{sub 2}-type rhombohedral phases, and what appeared to be a {epsilon}-type monoclinic phase, were observed, before a single-phase fluorite-type material was regained at 750 {sup o}C.
Dielectric strength and reliability of ferroelectric PLZT films deposited on nickel substrates.
We have deposited ferroelectric (FE) Pb{sub 0.92}La{sub 0.08}Zr{sub 0.52}Ti{sub 0.48}O{sub 3} (PLZT) films on nickel substrates by chemical solution deposition. Energy density of {approx} 46 J/cm{sup 3} has been measured with 1.15-{micro}m-thick PLZT/LNO/Ni film-on-foil capacitors. A series of highly accelerated lifetime tests were performed to determine the reliability of these FE film-on-foil capacitors under high temperature and high field stress. Samples were exposed to temperatures ranging from 100 to 150 C and electric fields ranging from 8.7 x 10{sup 5} V/cm to 1.3 x 10{sup 6} V/cm. The breakdown behavior of the FE PLZT film-on-foil capacitors was evaluated by Weibull analysis. The activation energy was determined to be {approx} 0.35 eV when an electric field of 1.05 x 10{sup 6} V/cm was applied. The voltage acceleration factor was {approx} -6.3 at 100 C. The mean time to failure was projected to be > 3000 h at 100 C with a dc electric field of {approx} 2.6 x 10{sup 5} V/cm.
Contribution of liver mitochondrial membrane-bound glutathione transferase to mitochondrial permeability transition pores
We recently reported that the glutathione transferase in rat liver mitochondrial membranes (mtMGST1) is activated by S-glutathionylation and the activated mtMGST1 contributes to the mitochondrial permeability transition (MPT) pore and cytochrome c release from mitochondria [Lee, K.K., Shimoji, M., Quazi, S.H., Sunakawa, H., Aniya, Y., 2008. Novel function of glutathione transferase in rat liver mitochondrial membrane: role for cytochrome c release from mitochondria. Toxcol. Appl. Pharmacol. 232, 109-118]. In the present study we investigated the effect of reactive oxygen species (ROS), generator gallic acid (GA) and GST inhibitors on mtMGST1 and the MPT. When rat liver mitochondria were incubated with GA, mtMGST1 activity was increased to about 3 fold and the increase was inhibited with antioxidant enzymes and singlet oxygen quenchers including 1,4-diazabicyclo [2,2,2] octane (DABCO). GA-mediated mtMGST1 activation was prevented by GST inhibitors such as tannic acid, hematin, and cibacron blue and also by cyclosporin A (CsA). In addition, GA induced the mitochondrial swelling which was also inhibited by GST inhibitors, but not by MPT inhibitors CsA, ADP, and bongkrekic acid. GA also released cytochrome c from the mitochondria which was inhibited completely by DABCO, moderately by GST inhibitors, and somewhat by CsA. Ca{sup 2+}-mediated mitochondrial swelling and cytochrome c release were inhibited by MPT inhibitors but not by GST inhibitors. When the outer mitochondrial membrane was isolated after treatment of mitochondria with GA, mtMGST1 activity was markedly increased and oligomer/aggregate of mtMGST1 was observed. These results indicate that mtMGST1 in the outer mitochondrial membrane is activated by GA through thiol oxidation leading to protein oligomerization/aggregation, which may contribute to the formation of ROS-mediated, CsA-insensitive MPT pore, suggesting a novel mechanism for regulation of the MPT by mtMGST1.
Effect of nonylphenol on male reproduction: Analysis of rat epididymal biochemical markers and antioxidant defense enzymes
The mechanism by which nonylphenol (NP) interferes with male reproduction is not fully elucidated. Therefore, the present study was conducted to evaluate the effect of NP on male reproductive organ's weight, sperm characteristics, and to elucidate the nature and mechanism of action of NP on the epididymis. Adult male Wistar rats were gavaged with NP, dissolved in corn oil, at 0, 100, 200 or 300 mg/kg/day for 30 consecutive days. Control rats were gavaged with vehicle (corn oil) alone. Body weight did not show any significant change while, absolute testes and epididymides weights were significantly decreased. Sperm count in cauda and caput/corpus epididymides, and sperm motility was significantly decreased. Daily sperm production was significantly decreased in a dose-related manner. Sperm transit time in cauda epididymis was significantly decreased by 300 mg/kg, while in the caput/corpus epididymis it was significantly decreased by 200 and 300 mg/kg of NP. Plasma LDH was significantly increased while; plasma testosterone was significantly decreased in a dose-related pattern. In the epididymal sperm, NP decreased acrosome integrity, Δψm and 5′-nucleotidase activity. Hydrogen peroxide (H{sub 2}O{sub 2}) production and LPO were significantly increased in a dose-related pattern. The activities of SOD, CAT and GPx were significantly decreased in the epididymal sperm. In conclusion, this study revealed that NP treatment impairs spermatogenesis and has a cytotoxic effect on epididymal sperm. It disrupts the prooxidant and antioxidant balance. This leads oxidative stress in epididymal sperms of rat. Moreover, the reduction in sperm transit time may affect sperm quality and fertility potential. -- Highlights: ► The nature and mechanism of action of NP on rat epididymis were elucidated. ► NP decreased sperm count, motility, daily sperm production and sperm transit time. ► NP decreased sperm acrosome integrity, Δψm and 5′-nucleotidase activity. ► Plasma LDH was significantly increased and testosterone was significantly decreased. ► NP induced oxidative stress in epididymal sperm.
Quantitative Analysis and Prediction of Thermal Runaway Metrics of High-Nickel Oxide Cathodes by Machine Learning Models
The pursuit of higher energy density in lithium-ion batteries has made high-nickel (Ni) layered oxides leading cathode candidates for next-generation electric vehicles. However, their poor thermal stability, particularly at Ni contents ≥ 90%, increases the risk of cathode-initiated thermal runaway. Furthermore, we present a data-driven framework combining linear and nonlinear machine learning models to predict key thermal runaway descriptors from a high-throughput differential scanning calorimetry database. With cathode composition and state of charge (SOC) as input features, the ensemble model accurately predicts peak temperature, heat release, and peak heat flow. SHAP analysis identifies Ni content and SOC as the dominant factors controlling thermal runaway temperature, while SOC primarily governs heat release and peak heat flow. Al, Mg, and Mn improve thermal stability by strengthening metal–oxygen bonding and delaying structural transformation, whereas B mainly reduces heat release through surface passivation. Validation with a new cathode composition confirms accurate prediction of SOC-dependent thermal runaway behavior and critical SOC.
Controlling Proton-Coupled Electron Transfer in Bioinspired Artificial Photosynthetic Relays
Bioinspired constructs consisting of benzimi- dazole-phenol moieties bearing N-phenylimines as proton-accepting substituents have been designed to mimic the H-bond network associated with the TyrZ-His190 redox relay in photosystem II. These compounds provide a platform to theoretically and experimentally explore and expand proton-coupled electron transfer (PCET) processes. The models feature H-bonds between the phenol and the nitrogen at the 3-position of the benzimidazole and between the 1H-benzimidazole proton and the imine nitrogen. Protonation of the benzimidazole and the imine can be unambiguously detected by infrared spectroelectrochemistry (IRSEC) upon oxidation of the phenol. DFT calculations and IRSEC results demonstrate that with sufficiently strong electron-donating groups at the para-position of the N-phenylimine group (e.g., -OCH3 substitution), proton transfer to the imine is exergonic upon phenol oxidation, leading to a one-electron, two-proton (E2PT) product with the imidazole acting as a proton relay. When transfer of the second proton is not sufficiently exergonic (e.g., -CN substitution), a one-electron, one-proton transfer (EPT) product is dominant. Thus, the extent of proton translocation along the H-bond network, either ~1.6 Å or ~6.4 Å, can be controlled through imine substitution. Moreover, the H-bond strength between the benzimidazole NH and the imine nitrogen, which is a function of their relative pKa values, and the redox potential of the phenoxyl radical/phenol couple are linearly correlated with the Hammett constants of the substituents. In all cases, a high potential (~1 V vs SCE) is observed for the phenoxyl radical/phenol couple. Designing and tuning redox-coupled proton wires is important for understanding bioenergetics and developing novel artificial photosynthetic systems.
Memory-dictated dynamics of single-atom Pt on CeO2 for CO oxidation
Abstract Single atoms of platinum group metals on CeO 2 represent a potential approach to lower precious metal requirements for automobile exhaust treatment catalysts. Here we show the dynamic evolution of two types of single-atom Pt (Pt 1 ) on CeO 2 , i.e., adsorbed Pt 1 in Pt/CeO 2 and square planar Pt 1 in Pt AT CeO 2 , fabricated at 500 °C and by atom-trapping method at 800 °C, respectively. Adsorbed Pt 1 in Pt/CeO 2 is mobile with the in situ formation of few-atom Pt clusters during CO oxidation, contributing to high reactivity with near-zero reaction order in CO. In contrast, square planar Pt 1 in Pt AT CeO 2 is strongly anchored to the support during CO oxidation leading to relatively low reactivity with a positive reaction order in CO. Reduction of both Pt/CeO 2 and Pt AT CeO 2 in CO transforms Pt 1 to Pt nanoparticles. However, both catalysts retain the memory of their initial Pt 1 state after reoxidative treatments, which illustrates the importance of the initial single-atom structure in practical applications.
Critical role of slags in pitting corrosion of additively manufactured stainless steel in simulated seawater
Abstract Pitting corrosion in seawater is one of the most difficult forms of corrosion to identify and control. A workhorse material for marine applications, 316L stainless steel (316L SS) is known to balance resistance to pitting with good mechanical properties. The advent of additive manufacturing (AM), particularly laser powder bed fusion (LPBF), has prompted numerous microstructural and mechanical investigations of LPBF 316L SS; however, the origins of pitting corrosion on as-built surfaces is unknown, despite their utmost importance for certification of LPBF 316L SS prior to fielding. Here, we show that Mn-rich silicate slags are responsible for pitting of the as-built LPBF material in sodium chloride due to their introduction of deleterious defects such as cracks or surface oxide heterogeneities. In addition, we explain how slags are formed in the liquid metal and deposited at the as-built surfaces using high-fidelity melt pool simulations. Our work uncovers how LPBF changes surface oxides due to rapid solidification and high-temperature oxidation, leading to fundamentally different pitting corrosion mechanisms.
X-ray spectroscopic study of amorphous and polycrystalline PbO films, α-PbO, and β-PbO for direct conversion imaging
We investigated the electronic structure of Lead Oxide (PbO) – one of the most promising photoconductor materials for direct conversion x-ray imaging detectors, using soft x-ray emission and absorption spectroscopy. Two structural configurations of thin PbO layers, namely the polycrystalline and the amorphous phase, were studied, and compared to the properties of powdered α-PbO and β-PbO samples. In addition, we performed calculations within the framework of density functional theory and found an excellent agreement between the calculated and the measured absorption and emission spectra, which indicates high accuracy of our structural models. Our work provides strong evidence that the electronic structure of PbO layers, specifically the width of the band gap and the presence of additional interband and intraband states in both conduction and valence band, depend on the deposition conditions. We tested several model structures using DFT simulations to understand what the origin of these states is. The presence of O vacancies is the most plausible explanation for these additional electronic states. Several other plausible models were ruled out including interstitial O, dislocated O and the presence of significant lattice stress in PbO.
On the thermal stability of vitrified industrial wastes using microscale synchrotron radiation based techniques
The effect of annealing on the local coordination of Fe in a series of vitrified industrial wastes is studied by means of x-ray fluorescence mapping, and micro- and conventional x-ray absorption fine structure (XAFS) spectroscopies. It is demonstrated that annealing causes the formation of Fe- and Pb-rich microcrystallites which are embedded in the glass matrix. The local coordination of the Fe ion depends on the local variations of its concentration, i.e., Fe occupies octahedral sites in the Fe-rich crystalline regions and tetrahedral sites into the vitreous network. The percentage of the Fe atoms that belong to the crystalline inclusions depends on the waste content and the annealing temperature, and the stability of the vitrified product is discussed in relation to the nature of the formed microcrystallites. More specifically, when the microcrystallites are mixed Pb and Fe oxides, the material is safe since Pb is trapped both in the crystalline and vitreous regions. Finally, the effect of the different types of crystalline phases and crystalline ratio on the characteristics of the preedge peak in the near edge XAFS spectra is also discussed.
Nano suboxide layer generated in Ta{sub 2}O{sub 5} by Ar{sup +} ion irradiation
Ta{sub 2}O{sub 5}/TaO{sub x} heterostructure has become a leading oxide layer in memory cells and/or a bidirectional selector for resistive random access memory (RRAM). Although atomic layer deposition (ALD) was found to be uniquely suitable for depositing uniform and conformal films on complex topographies, it is hard to use ALD to grow suboxide TaO{sub x} layer. In this study, tantalum oxide films with a composition of Ta{sub 2}O{sub 5} were grown by ALD. Using Ar{sup +} ion irradiation, the suboxide was formed in the top layer of Ta{sub 2}O{sub 5} films by observing the Ta core level shift toward lower binding energy with angle-resolved X-ray photoelectron spectroscopy. By controlling the energy and irradiation time of an Ar{sup +} ion beam, Ta{sub 2}O{sub 5}/TaO{sub x} heterostructure can be reliably produced on ALD films, which provides a way to fabricate the critical switching layers of RRAM.
Characterization and optical properties of Fe{sub 2}O{sub 3}-PbO-B{sub 2}O{sub 3} glasses
Heavy metal-based oxide glasses of compositions xFe{sub 2}O{sub 3}.(40-x)PbO.60B{sub 2}O{sub 3} have been synthesized by the standard melt-quenching technique. The amorphous nature of these samples is ascertained by XRD patterns. Scanning Electron Microscope is used to study the microstructure of the samples. The absorption edge (λ{sub cut-off}) shifts toward longer wavelengths with an increase in Fe{sub 2}O{sub 3} content in the glass matrix. Study of absorption edge signifies the glassy nature of the samples. The values of optical band gap energy for indirect allowed and forbidden transitions have been determined and it is found that it decreases with increasing Fe{sub 2}O{sub 3} content. The Urbach’s energy is used to characterize the degree of disorder in the studied samples.
High charge-discharge performance of Pb{sub 0.98}La{sub 0.02}(Zr{sub 0.35}Sn{sub 0.55}Ti{sub 0.10}){sub 0.995}O{sub 3} antiferroelectric ceramics
The energy storage performance and charge-discharge properties of Pb{sub 0.98}La{sub 0.02}(Zr{sub 0.35}Sn{sub 0.55}Ti{sub 0.10}){sub 0.995}O{sub 3} (PLZST) antiferroelectric ceramics were investigated through directly measuring the hysteresis loops and pulse discharge current-time curves. The energy density only varies 0.2% per degree from 25 °C to 85 °C, and the energy efficiency maintains at about 90%. Furthermore, an approximate calculating model of maximum power density p{sub max} was established for the discharge process. Under a relatively high working electric field (8.2 kV/mm), this ceramics possess a greatly enhanced power density of 18 MW/cm{sup 3}. Moreover, the pulse power properties did not show degradation until 1500 times of charge-discharge cycling. The large released energy density, high energy efficiency, good temperature stability, greatly enhanced power density, and excellent fatigue endurance combined together make this PLZST ceramics an ideal candidate for pulse power applications.
Study of the optical absorption and photoluminescence in (Pb,Gd){sub 3}(Al,Ga){sub 5}O{sub 12} : Ce epitaxial films grown from Pb-containing melt solutions
The optical absorption and photoluminescence properties of cerium-activated (Pb,Gd){sub 3}(Al,Ga){sub 5}O{sub 12} epitaxial films are studied. The films are grown on single-crystal (111)-oriented Gd{sub 3}Ga{sub 5}O{sub 12} substrates by liquid-phase epitaxy from supercooled PbO – B{sub 2}O{sub 3} melt solutions at different concentrations of gadolinium, cerium, and aluminium oxides in the charge. The photoluminescence band of Ce{sup 3+} ions is shown to peak at 532 nm. The highest cathodoluminescence yield of about 51500 photons MeV{sup -1} at a decay time of the slow component of 61.0 ns (light yield fraction 68%) is found for the Pb{sub 0.01}Ce{sub 0.03}Gd{sub 2.96}Al{sub 3.14}Ga{sub 1.86}O{sub 12} film, grown from melt solution with gadolinium oxide, cerium oxide, and aluminium oxide concentrations of 0.4, 0.2, and 4.5 mol % in the charge, respectively. Epitaxial films with these spectroscopic characteristics are promising for application in scintillation screens. (fluorescence and photogeneration)