Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Jones matrix”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Robust conductive mesoporous carbon-silica composite films with highly ordered and oriented orthorhombic structures from triblock-copolymer template co-assembly

In this work, we describe a facile approach to improve the robustness of conductive mesoporous carbon-based thin films by the addition of silica to the matrix through the triconstituent organic-inorganic-organic co-assembly of resol (carbon precursor) and tetraethylorthosilicate (silica precursor) with triblock-copolymer Pluronic F127. The pyrolysis of the resol-silica-pluronic F127 film yields a porous composite thin film with well-defined mesostructure. X-Ray diffraction (XRD), grazing incidence small angle X-ray scattering (GISAXS), and electron microscopy measurements indicate that the obtained carbon-based thin films have a highly ordered orthorhombic mesostructure (Fmmm) with uniform large pore size (~3 nm). The orthorhombic mesostructure is oriented and the (010) plane is parallel to the silicon wafer substrate. The addition of silica to the matrix impacts the pore size, surface area, porosity, modulus and conductivity. For composite films with approximately 40 wt% silica, the conductivity is decreased by approximately an order of magnitude in comparison to a pure carbon mesoporous film, but the conductivity is comparable to typical printed carbon inks used in electrochemical sensing, {approx}10 S cm -1 . The mechanical properties of these mesoporous silica-carbon hybrid films are similar to the pure carbon analogs with a Young's modulus between 10 GPa and 15 GPa, but the material is significantly more porous. Moreover, the addition of silica to the matrix appears to improve the adhesion of the mesoporous film to a silicon wafer. These mesoporous silica-carbon composite films have appropriate characteristics for use in sensing applications.

36 MATERIALS SCIENCE↗

Quadrupole and octupole collectivity in 143 Ba

The neutron-rich barium nuclei have been the subject of intense interest due to the enhanced octupole correlations they are predicted to exhibit. The observation of enhanced octupole collectivity in 144,146 Ba as measured in sub-barrier Coulomb excitation, consistent with static octupole deformation, has further heightened this interest. In the present work, these studies are extended to the neighboring odd-mass 143 Ba to investigate the interplay between single-particle and collective octupole degrees of freedom. A new measurement of the first 9/2 – -state lifetime is also presented. Reflection-Asymmetric Triaxial Particle Rotor Model calculations indicate that the negative-parity bands in 143 Ba can be understood as a decoupled structure of νh 9/2 parentage, while the positiveparity bands are built on a decoupled octupole phonon. Here, no evidence for E3 excitation is observed in this work, but an upper limit is placed on the E3 matrix element to the lowest octupole band.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Metal Matrix Composite LOX Turbopump Housing Via Novel Tool-Less Net-Shape Pressure Infiltration Casting Technology

This presentation provides an overview of the effort by Metal Matrix Cast Composites, Inc. to redesign turbopump housing joints using metal matrix composite material and a toolless net-shape pressure infiltration casting technology. Topics covered include: advantage of metal matrix composites for propulsion components, baseline pump design and analysis, advanced toolless pressure infiltration casting process, subscale pump housing, preform splicing and joining for large components, and fullscale pump housing redesign.

Shah, Sandeep↗

Molecularly Mixed Composite Membranes for Advanced Separation Processes

Abstract Porous organic cages (POCs) are individual soluble, porous molecules. When fabricated into mixed‐matrix membranes (MMMs), the soluble POC molecules have the potential to exhibit intimate molecular‐level mixing with the polymer matrix. POCs have only recently been incorporated into mixed matrix membrane materials, but this process has not yet resulted in significant improvements of membrane performance. Now, vertex‐functionalized amorphous scrambled porous organic cages (ASPOCs) have been utilized as membrane performance enhancers and the amorphous ASPOC mixtures are observed to distribute throughout the matrix without any indication of particle formation or agglomeration, creating unique, molecularly mixed composite membranes. Overall, the molecularly mixed composite membrane provide significant increases in both membrane permeability and selectivity, offering new avenues for creation of membranes with unique properties in industrially relevant separations.

Zhu, Guanghui↗

Molecularly Mixed Composite Membranes for Advanced Separation Processes

Porous organic cages (POCs) are individual soluble, porous molecules. Additionally, when fabricated into mixed-matrix membranes (MMMs), the soluble POC molecules have the potential to exhibit intimate molecular-level mixing with the polymer matrix. POCs have only recently been incorporated into mixed matrix membrane materials, but this process has not yet resulted in significant improvements of membrane performance. Now, vertex-functionalized amorphous scrambled porous organic cages (ASPOCs) have been utilized as membrane performance enhancers and the amorphous ASPOC mixtures are observed to distribute throughout the matrix without any indication of particle formation or agglomeration, creating unique, molecularly mixed composite membranes. Overall, the molecularly mixed composite membrane provide significant increases in both membrane permeability and selectivity, offering new avenues for creation of membranes with unique properties in industrially relevant separations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mathematical modeling of damage in unidirectional composites

Extending the work of Goree and Gross (1979), solutions are given for a two-dimensional region of unidirectional fibers embedded in an elastic matrix whose initial flaw may take the form of a transverse notch, a rectangular cutout, or a circular hole. Subsequent flaw-induced damage is generated by remote stresses acting parallel to the fibers. For the case of such ductile matrix composites as boron/aluminum, present results indicate that both longitudinal matrix yielding and transverse notch extension must be included in order for the model to agree with experimental results. Little difference is found for the three types of initial damage considered. In all cases, the presence of additional damage changes the nature of stress distribution through the unbroken fibers.

Goree, J. G.↗

Evaluation of a Variable-Impedance Ceramic Matrix Composite Acoustic Liner

As a result of significant progress in the reduction of fan and jet noise, there is growing concern regarding core noise. One method for achieving core noise reduction is via the use of acoustic liners. However, these liners must be constructed with materials suitable for high temperature environments and should be designed for optimum absorption of the broadband core noise spectrum. This paper presents results of tests conducted in the NASA Langley Liner Technology Facility to evaluate a variable-impedance ceramic matrix composite acoustic liner that offers the potential to achieve each of these goals. One concern is the porosity of the ceramic matrix composite material, and whether this might affect the predictability of liners constructed with this material. Comparisons between two variable-depth liners, one constructed with ceramic matrix composite material and the other constructed via stereolithography, are used to demonstrate this material porosity is not a concern. Also, some interesting observations are noted regarding the orientation of variable-depth liners. Finally, two propagation codes are validated via comparisons of predicted and measured acoustic pressure profiles for a variable-depth liner.

Jones, M. G.↗

Scaling Trivalent Actinide and Lanthanide Recovery by Diglycolamide Resin from Savannah River Site’s Mark-18A Targets

The Savannah River National Laboratory is implementing a separation flowsheet to recover rare isotopes and transplutonium elements from irradiated 242 Pu targets known as Mark-18A targets. The Mark-18A targets contain the United States’ supply of nonseparated 244 Pu, which has a wide range of applications from nuclear forensics to production of superheavy elements such as flerovium. The targets also contain hundreds of grams of heavy curium ( 246–248 Cm), which is used as a target material for 252 Cf production. This work investigates the use of diglycolomide resin (DGA Resin) to recover valuable trivalent actinides from the Mark-18A targets. Batch contact experiments were performed on a representative simulant to determine mass loadings. Furthermore, the resin showed an overall capacity of 11 mg/mL for a mixed metal matrix (Zr and La–Gd). Column experiments showed chromatographic separation with transition-metal breakthroughs occurring first followed by the lanthanide series La–Gd. The experiments showed that lanthanide breakthrough occurred after 11 mg/mL mass loading was reached on the column with the mixed metal matrix. A radiological column experiment with an in-line UV/vis cell was able to detect Nd breakthrough just prior to 241 Am breakthrough. Implementing an in-line UV/vis cell into full-scale Mark-18A target processing will be used to limit breakthrough of trivalent actinides recovered from the targets.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Polyimide matrix resins for up to 700 deg F service

TRW is in the process of data accumulation that strongly indicates that incorporation of the perfluorsisopropylidene linkage in molecular structures other than those employed in DU Pont's NR-150B polyimides likewise yield polymers demonstrating extremely high thermo-oxidative stability. Polyimide synthetic and characterization studies conducted to date on new polymers incorporating the perfluoroisopropylidene linkage are presented and discussed.

Jones, R. J.↗

Epigenetic effects of paternal cocaine on reward stimulus behavior and accumbens gene expression in mice

Paternal cocaine use causes phenotypic alterations in offspring behavior and associated neural processing. In rodents, changes in first generation (F1) offspring include drug reward behavior, circadian timing, and anxiety responses. This study, utilizing a murine (C57BL/6J) oral cocaine model, examines the effects of paternal cocaine exposure on fundamental characteristics of offspring reward responses, including: 1) the extent of cocaine-induced effects after different durations of sire drug withdrawal; 2) sex- and drug-dependent differences in F1 reward preference; 3) effects on second generation (F2) cocaine preference; and 4) corresponding changes in reward area (nucleus accumbens) mRNA expression. We demonstrate that paternal cocaine intake over a single ˜40-day spermatogenic cycle significantly decreased cocaine (but not ethanol or sucrose) preference in a sex-specific manner in F1 mice from sires mated 24h after drug withdrawal. However, F1 offspring of sires bred 4 months after withdrawal did not exhibit altered cocaine preference. Altered cocaine preference also was not observed in F2's. RNASeq analyses of F1 accumbens tissue revealed changes in gene expression in male offspring of cocaine-exposed sires, including many genes not previously linked to cocaine addiction. Enrichment analyses highlight genes linked to CNS development, synaptic signaling, extracellular matrix, and immune function. Expression correlation analyses identified a novel target, Fam19a4, that may negatively regulate many genes in the accumbens, including genes already identified in addiction. Collectively, these results reveal that paternal cocaine effects in F1 offspring may involve temporally limited epigenetic germline effects and identify new genetic targets for addiction research.

59 BASIC BIOLOGICAL SCIENCES↗

Effect of metamorphism on isolated olivine grains in CO3 chondrites

The presence of a metamorphic sequence in the CO3 chondrite group has been shown previously to result in changes in properties of chondrule silicates. However, the role of isolated olivine grains during metamorphism of these chondrites has not been addressed. Isolated olivine grains in two metamorphosed CO3 chondrites, Lance and Isna, have been investigated in this study in order to assess the compositional properties of isolated olivine grains that may be attributable to metamorphism. Compositional changes in isolated olivines with increasing petrologic subtype are very similar to changes in chondrule olivines in the same chondrites. Olivine compositions from all occurrences (chondrules, isolated grains, and matrix) converge with increasing petrologic subtype. The degree of equilibration of minor elements is qualitatively related to the diffusion rate of each element in olivine, suggesting that diffusion-controlled processes are the most important processes responsible for compositional changes within the metamorphic sequence. The data are consistent with metamorphism taking place in a closed system on the CO3 chondrite parent body. Fe-poor olivine grains in metamorphosed chondrites are characterized by an Fe-rich rim, which is the result of diffusion of Fe into the grains from Fe-rich matrix. In some instances, 'complex', Fe-rich rims have been identified, which appear to have originated as igneous overgrowths and subsequently to have been overprinted by diffusion processes during metamorphism. Processes experienced by CO3 chondrites are more similar to those experienced by the ordinary chondrites than to those encountered by other carbonaceous chondrites, such as the CV3 group.

Jones, Rhian H.↗

Effects of Thermal Exposure on Properties of Al-Li Alloys

This paper presents viewgraphs on the effects of thermal exposure on the mechanical properties of both developmental and production mature Al-Li alloys. The topics include: 1) Aluminum-Lithium Alloys Composition and Features; 2) Key Characteristics of Al-Li Alloys; 3) Research Approach; 4) Available and Tested Material; and 5) Thermal Exposure Matrix. The alloy temperatures, gage thickness and product forms show that there is no deficit in mechanical properties at lower exposure temperatures in some cases, and a significant deficit in mechanical properties at higher exposure temperatures in all cases.

Shah, Sandeep↗

Real-Time, Adaptive Radiological Anomaly Detection and Isotope Identification Using Non-Negative Matrix Factorization

Spectroscopic anomaly detection and isotope identification algorithms are integral components in nuclear nonproliferation applications such as search operations. The task is especially challenging in the case of mobile detector systems because the observed gamma-ray background changes more than for a static detector system, and a pretrained background model can easily find itself out of domain. The result is that algorithms may exceed their intended false alarm rate or sacrifice detection sensitivity to maintain the desired false alarm rate. Non-negative matrix factorization (NMF) is a powerful tool for spectral anomaly detection and identification, but, like many similar algorithms that rely on data-driven background models, in its conventional implementation, it is unable to update in real time to account for environmental changes that affect the background spectroscopic signature. Here, we have developed a novel NMF-based algorithm that periodically updates its background model to accommodate changing environmental conditions. The adaptive NMF algorithm involves fewer assumptions about its environment, making it more generalizable than existing NMF-based methods while maintaining or exceeding detection performance on simulated and real-world datasets.

Anomaly detection↗

Computer-generated formulas for three-center nuclear-attraction integrals (electrostatic potential) for Slater-type orbitals

The computer-assisted C-matrix, Loewdin-alpha-function, single-center expansion method in spherical harmonics has been applied to the three-center nuclear-attraction integral (potential due to the product of separated Slater-type orbitals). Exact formulas are produced for 13 terms of an infinite series that permits evaluation to ten decimal digits of an example using 1s orbitals.

Jones, H. W.↗

Toward a Fieldable Atomic Mass Spectrometer for Safeguards Applications: Sample Preparation and Ionization

The International Atomic Energy Agency’s (IAEA’s) long-term research and development plan calls for the development of new methods to detect misuse at nuclear fuel cycle facilities such as reprocessing and enrichment plants. At enrichment plants, for example, the IAEA’s contemporary safeguards approaches are based on a combination of routine and random inspections that include collection of UF6 samples from in-process material and selected cylinders for subsequent analyses. These analyses include destructive analysis (DA) in a laboratory (typically by mass spectrometry [MS]) for isotopic characterization, and environmental sampling (ES) for subsequent laboratory elemental and isotopic analysis (also both typically by MS). One area of new method development includes moving this kind of isotope ratio analytical capability for DA and ES activities into the field. Some of the reasons for these developments include timeliness of results, avoidance of hazardous material shipments, and guidance for additional sample collecting. However, this capability does not already exist for several reasons, such as that most lab-based chemical and instrumental methods rely on laboratory infrastructure (highly trained staff, power, space, hazardous material handling, etc.) and require significant amounts of consumables (power, compressed gases, etc.). In addition, there are no currently available, fieldable instruments for atomic or isotope ratio analysis. To address these issues, Pacific Northwest National Laboratory (PNNL) and collaborator, Clemson University, are studying key areas that limit the fieldability of isotope ratio mass spectrometry for atomic ions: sample preparation and ionization, and reducing the physical size of a fieldable mass spectrometer. PNNL is seeking simple and robust techniques that could be effectively used by inspectors who may have no expertise in analytical MS. In this report, we present and describe the preliminary findings for three candidate techniques: matrix-assisted laser desorption/ionization (MALDI) MS, liquid sampling-atmospheric pressure glow discharge (LS-APGD), and laser ablation/ionization (LAI) MS at atmospheric pressure. Potential performance metrics for these techniques will be presented, including detectability, response, isotope ratio accuracy and precision, and ease of use.

Barinaga, Charles J.↗

Fuel/Basket Degradation and Waste Package Pressure Effects Modeling (Progress Report)

Progress is reported on development and testing of the Fuel/Basket Degradation Model, and the Waste Package Breach Model. The work follows on reported FY19 model development (SNL-ICG 2019). Modeling has addressed questions framed in the deliverable description: 1) how fuel/basket damage, including from seismic ground motion, could impact reactivity; 2) whether dynamic degradation processes (e.g., caused by seismic ground motion) should be targets for further model development; and 3) what are the key model parameters and how do they affect the likelihood and energy of criticality events. For basket structure made from aluminum-based metal-matrix composite material, basket collapse would coincide with loss of neutron absorbers, and would occur within a few hundred years after waste package breach. Degradation models discussed in this report have thus far focused on a generic 32-PWR (pressurized water reactor fuel) basket with aluminum-based plates

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Probing Quark-Gluon Interactions with Transverse Polarized Scattering

We have extracted QCD matrix elements from our data on doubly polarized inelastic scattering of electrons on nuclei. We find the higher twist matrix element d{sub 2}-tilde, which arises strictly from quark-gluon interactions, to be unambiguously nonzero. The data also reveal an isospin dependence of higher twist effects if we assume that the Burkhardt-Cottingham sum rule is valid. The fundamental Bjorken sum rule obtained from the a{sub 0} matrix element is satisfied at our low momentum transfer.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

An approximately factored incremental strategy for calculating consistent discrete aerodynamic sensitivity derivatives

An incremental strategy is presented for iteratively solving very large systems of linear equations, which are associated with aerodynamic sensitivity derivatives for advanced CFD codes. It is shown that the left-hand side matrix operator and the well-known factorization algorithm used to solve the nonlinear flow equations can also be used to efficiently solve the linear sensitivity equations. Two airfoil problems are considered as an example: subsonic low Reynolds number laminar flow and transonic high Reynolds number turbulent flow.

Korivi, V. M.↗