Phase evolution and magnetic properties of (Ce,Nd)–Fe–B prepared using microwave-assisted approach
Explore the source record for details and available documents.
Parmar, Harshida [Critical Materials Innovation Hu↗
SEARCH · Engineering Papers
Results for “Innovative Materials”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
An innovative carbonated cementitious material and its printability and carbon mineralization capacity
The main goal of this research is to develop a carbonated cementitious material (CCMs) mix design and demonstrate its rapid stiffening for manufacturing 3D printed or precast elements for building construction (i.e., concrete with enhanced durability and CO 2 capture efficiency). The material development employs hydrated Ca(OH) 2 , and its distinct reaction with CO 2 to form CaCO 3 . Different formulations and additives including polymer materials enable the thermomechanical properties that give these CCMs 3D printability comparable with cement materials used for similar applications. Here, printable and castable CCM formulations were successfully developed and demonstrated to mineralize CO 2 to form up to 57% CaCO 3 .
36 MATERIALS SCIENCE↗
An innovative radial gradient material design using hot isostatic pressing for applications in extreme environments
Functionally graded materials (FGMs) are highly advanced continuous or discontinuous structures whose structural and material properties vary along a singular geometric dimension either in the axial or radial direction. Here, the radial gradient FGM design makes for an optimal structural design to incorporate a bi-metallic structure with a copper-based high entropy alloy (Cu-HEA) with good mechanical properties and high irradiation resistance, and Chromium (Cr) with great corrosion resistance. This study focuses on the experimental design of a metal powder loading mechanism to fabricate a bi-metallic radial gradient structure using Cu-HEA and 99.9 % pure Cr metal powders. The powder loading strategy uses custom-designed concentric cylindrical dividers to separate the individual compositions. Two benchtop trial runs were performed for design optimization. The optimized design was then implemented to eventually load the HEA and Cr powders for consolidation via powder metallurgy hot isostatic pressing (PM-HIP). The electron microscopy analysis reveals the successful fabrication of the radial gradient structure with the chemical mapping analysis, demonstrating the gradual composition shift from the HEA at the center to the pure-Cr at the periphery via a three-step gradient.
High Entropy Alloys (HEAs)↗
Roll-to-Roll Advanced Materials Manufacturing DOE Laboratory Collaboration (FY2019 Final Report)
R2R processing is used to manufacture a wide range of products for various applications which span many industrial business sectors. The overall R2R methodology has been in use for decades and this continuous technique traditionally involves deposition of material(s) onto moving webs, carriers or other continuous belt-fed or conveyor-based processes that enable successive steps to build a final version which serves to support the deposited materials. Established methods that typify R2R include tape casting, silk-screen printing, reel-to-reel vacuum deposition/coating and R2R lithography. Products supported by R2R manufacturing include micro-electronics, electro-chromic window films, PVs, fuel cells for energy conversion, battery electrodes for energy storage, and barrier and membrane materials. Due to innovation in materials and process equipment, high-quality yet very low-cost multilayer technologies have the potential to be manufactured on a very cost-competitive basis. To move energy-related products from high-cost niche applications to the commercial sector, a means must be available to enable manufacture of these products in a cost-competitive manner that is affordable. Fortunately, products such as fuel cells, thin- and mid-film PVs, batteries, electrochromic and piezoelectric films, water separation membranes, and other energy saving technologies readily lend themselves to manufacture using R2R approaches. However, more early-stage research is needed to solve the challenge of linking the materials (particles, polymers, solvents, additives) used in ink and slurry formulations, though the ink processing, coating and drying processes, to the ultimate performance of the final R2R product, especially for a process that uses multiple layers of deposition to achieve the end product.
42 ENGINEERING↗
Roll-to-Roll Advanced Materials Manufacturing DOE Laboratory Collaboration (FY2020 Final Report)
R2R processing is used to manufacture a wide range of products for various applications which span many industrial business sectors. The overall R2R methodology has been in use for decades and this continuous technique traditionally involves deposition of material(s) onto moving webs, carriers or other continuous belt-fed or conveyor-based processes that enable successive steps to build a final version which serves to support the deposited materials. Established methods that typify R2R processing include tape casting, silk-screen printing, reel-to-reel vacuum deposition/coating, and R2R lithography. Products supported by R2R manufacturing include micro-electronics, electro-chromic window films, PVs, fuel cells for energy conversion, battery electrodes for energy storage, and barrier and membrane materials. Due to innovation in materials and process equipment, high-quality yet very low-cost multilayer technologies have the potential to be manufactured on a very cost-competitive basis. To move energy-related products from high-cost niche applications to the commercial sector, the means must be available to enable manufacture of these products in a cost-competitive manner that is affordable. Fortunately, products such as fuel cells, thin- and mid-film PVs, batteries, electrochromic and piezoelectric films, water separation membranes, and other energy saving technologies readily lend themselves to manufacture using R2R approaches. However, more early-stage research is needed to solve the challenge of linking the materials (particles, polymers, solvents, additives) used in ink and slurry formulations and the coating and drying processes to the ultimate performance of the final R2R product, especially for a process that uses multiple layers of deposition to achieve the end product. To solve the problems associated with these challenges, the R2R Collaboration is executing a research program with outcomes that will ultimately link modeling, processing, metrology and defect detection tools, thereby directly relating the properties of constituent particles and processing conditions to the performance of final devices. This collaborative approach was designed to foster identification and development of materials and processes related to R2R for clean-energy materials development. Using computational and experimental capabilities by acknowledged subject matter experts within the supported National Laboratory system, this project leverages the capabilities and expertise at each of five National Laboratories to further the development of multilayer technologies that will enable high-volume, cost-competitive platforms. A typical R2R process has three steps: (1) mixing of particles and various constituents in a slurry, (2) coating of the ink/slurry mixture on a substrate, and (3) drying/curing and processing of the coating. Final performance of devices made via R2R processes is dependent on the active materials (e.g., electrochemical particles in battery or fuel cell electrodes) and the device structure that stems from the governing component interactions within the various steps. However, a fundamental understanding of the underlying mechanisms and phenomena is still lacking, which is why industrial-scale R2R process development and manufacturing is still largely empirical in nature. The FY 2019 through FY 2021 program addresses aspects of the following two targets from the AMO Multi-Year Program Plan: (1) Target 8.1 Develop technologies to reduce the cost per manufactured throughput of continuous R2R manufacturing processes. (A) Increasing throughput of R2R processes by 5 times for batteries (to 50 square feet per minute (50 ft 2 /min)) and capacitors and 10 times for printed electronics and the manufacture of other substrates and MEs used in support of these products. (B) Developing resolution capabilities to enable registration and alignment that will detect, align, and co-deposit multiple layers of coatings and print < 1-micron (1 µm) features using continuous process scalable for commercial production. (C) Developing scalable and reliable R2R processes for solution deposition of ultra-thin (<10 nm) films for active and passive materials. (D) Develop in-line multilayer coating technology on thin films with yields greater than 95%. (2) Target 8.2 Develop in-line instrumentation tools that will evaluate the quality of single and multilayer materials in-process. (A) Developing in-line QC technologies and methodologies for real-time identification of defects and expected product properties “in-use/application” during continuous processing at all size-scales with a focus on the “micro” and “nano” scale traces, lines, and devices, i.e., <1 μm at 300 ft./min for R2R processing in air and <10 nm at 20 ft./min for vacuum (B) Developing technologies to increase the measurement frequency of surface rheology without significant cost increases with a goal of a 10-nanometer in-line profilometry at a production rate of 100,000 square millimeters per minute (100,000 mm 2 /min).
42 ENGINEERING↗
Frontier nonequilibrium materials science enabled by ultrafast electron methods
Most innovation in materials science and engineering resides in our ability to understand and control the intimate relationship between the structure of materials and their properties. Conventionally, the only route to discovering innovative new material properties has been to explore the structural and compositional phase space that is accessible at (or near) thermodynamic equilibrium. The characterization, manipulation and, ultimately, control of material properties far from equilibrium offers almost completely untapped possibilities for uncovering novel states and phases of materials. Investigations of materials far from equilibrium require the development of new techniques, which are capable of following dynamic processes in materials with extreme spatiotemporal resolution. Thus, ultrafast electron-based methods have become a major new frontier in materials science due to the capability of following dynamics on time scales as short as femtoseconds with the high spatial resolution and sensitivity afforded by electrons. The articles in this issue provide an exciting cross section of the novel research directions that have been enabled at this frontier. Imaging on ultrafast time scales carries critical information on phase transitions, fundamental processes involved in light-harvesting, magnetic, and plasmonic dynamics, the coupling of electronic and nuclear degrees of freedom in materials and has revealed previously hidden, nonequilibrium metastable states of matter that have no equilibrium analog.
36 MATERIALS SCIENCE↗
Review on Perovskite Solar Cells: From Single‐Junction Devices to Tandem Deployment in Space
Perovskite solar cells (PSCs) have emerged as a transformative photovoltaic technology, offering high power conversion efficiency (PCE) and the potential for cost-effective manufacturing. However, stability and large-scale manufacturing remain critical challenges that must be addressed for widespread adoption. This review provides a roadmap from single-junction perovskite solar cells to tandem deployment in space. First, material-level innovations are discussed, including mixed-cation and low-dimensional perovskites, transport materials, and additives that improve thermal and structural stability while enhancing efficiency. Then, we examine both established industrial standards and emerging scientific protocols aimed at stabilizing PSCs under operational conditions, including tandem cell integration strategies and encapsulation techniques to mitigate performance degradation. Manufacturing scalability is a focal point, where deposition methods and green solvents are explored to improve large-area film uniformity and reduce environmental impact. Additionally, the increasing viability of PSCs in extraterrestrial environments is assessed, with emphasis on their performance in space applications, radiation resistance, and flexible lamination methods for deployment in extreme conditions. Progress across materials innovation, device architectures, stability testing protocols, and both terrestrial and extraterrestrial applications collectively drives perovskite photovoltaics toward higher efficiency, stability, and cost-effectiveness.
flexible PSCs↗
Electrochemical Leaching of Cobalt from Cobaltite: Box-Behnken Design and Optimization with Response Surface Methodology
Not Available
Box-Behnken Design of Experiments↗
Chemical bond and phase stability of Ga-doped Sm2Fe17Cx magnet
Sm2Fe17C3 phase (2:17) is metastable and exhibits excellent intrinsic hard magnetic properties. Doping elements such as Ga facilitate the formation of a single-phase 2:17 structure in arc-melted Sm2Fe17Cx alloys, which opens a promising route for fabricating fully dense bulk Sm2Fe17Cx magnets via high-temperature techniques such as melting and sintering. First-principles electronic structure calculation indicates that Ga prefers to partially replace Fe at the 9d and 18h crystallographic sites in Sm2Fe17C3 and Sm2Fe17, respectively. This difference in site preference is attributed to the distinct chemical environments surrounding the Fe atoms in the two compounds. Ga substitution favors the Sm–Ga bonding formation while avoiding Ga–C interactions. Doped Ga atoms result in more negative formation energy in Sm2(Fe, Ga)17C3, indicating improved structural stability. Crystal Orbital Hamilton Population analysis reveals that carbon insertion weakens the bonding of Sm-Fe (18h) and Sm-Fe (18f) in Sm2Fe17C3. Ga doping facilitates electron redistribution across chemical bonds, thereby reinforcing Fe(18h)–Sm and Fe(18f)–Sm interactions and stabilizing the carbon-centered octahedral local structure. This synergistic effect contributes significantly to the observed enhancement in phase stability of Sm2(Fe, Ga)17Cx. These findings suggest that chemical bond engineering through the selective doping of Ga can enhance phase stability and facilitate the synthesis of Sm2Fe17C3, providing a viable strategy for developing advanced magnets.
Liu, Xubo [Critical Materials Innovation Hub, Divi↗
Critical minerals lists for low-carbon transitions: Reviewing their structure, objectives, and limitations
Critical minerals lists have flourished in the past decade, in particular linked to the importance of critical minerals for low-carbon transitions. We identified 27 critical minerals or materials lists across 15 countries and the European Union (EU). These lists are designed to attract public and private attention and investments to secure both domestic and foreign supplies. This review article fills a gap in the existing literature by analyzing the ways in which these lists are defined and utilized by countries engaged in a mineral rush. We focus our attention on three categories of minerals – battery minerals, platinum-group metals (PGMs), and rare earth elements (REEs) that are particularly important to energy transitions. We situate this research in the broader legal and administrative developments that have driven critical minerals policies in the past decade. We provide an in-depth analysis of the commonalities and variations in the raw materials included in these lists, and identify six core limitations of critical minerals lists: (1) unclear links between criticality assessments and mineral prioritization (2) failure to account for the full mineral value-chain; (3) limited strategic alignment between allied nations; (4) limited flexibility in dynamic environments (5) limited consideration for recycling and by-product sourcing; and (6) reliance on incomplete reserve and resource data.
Battery minerals↗
US critical materials strategy: The importance of innovation in obtaining supply chain security
Critical raw materials (CRMs) and/or critical minerals and materials (CMMs) are metals, metal groups, and non-metallic minerals essential for the many modern technologies, including wind turbine, electric vehicles and energy storage systems. Different countries have slightly different metrics for determining criticality. However, broadly speaking, the European Union (EU) and United States (US)both define them as materials that reach or exceed thresholds for both economic importance and supply risk. Furthermore, both organizations have implemented instruments, such as the EU's 2024 Critical Raw Materials Act and the US Department of Energy's (DOE) Critical Minerals and Materials Strategy, to facilitate research and development of CRM/CMM ranging from mineral deposit development to geometallurgy to separations to advanced manufacturing. This talk is aimed at an EU audience to explain the DOE CMM strategy and how it compares to the steps taken by the EU to facilitate progress. Furthermore, this talk takes a geology-centric approach on the challenges geoscientists face and how their roles may change in the future.
58 GEOSCIENCES↗
A defect-resistant Co–Ni superalloy for 3D printing
Abstract Additive manufacturing promises a major transformation of the production of high economic value metallic materials, enabling innovative, geometrically complex designs with minimal material waste. The overarching challenge is to design alloys that are compatible with the unique additive processing conditions while maintaining material properties sufficient for the challenging environments encountered in energy, space, and nuclear applications. Here we describe a class of high strength, defect-resistant 3D printable superalloys containing approximately equal parts of Co and Ni along with Al, Cr, Ta and W that possess strengths in excess of 1.1 GPa in as-printed and post-processed forms and tensile ductilities of greater than 13% at room temperature. These alloys are amenable to crack-free 3D printing via electron beam melting (EBM) with preheat as well as selective laser melting (SLM) with limited preheat. Alloy design principles are described along with the structure and properties of EBM and SLM CoNi-base materials.
36 MATERIALS SCIENCE↗
Partnerships and collaboration drive innovative graduate training in materials informatics
Holistic and intentional training prepares next-generation materials informatics leaders and workforce for expedited materials discovery and design.
97 MATHEMATICS AND COMPUTING↗
Impact of Annealing on Superconducting Properties of Tantalum Thin Films
The pursuit for higher-coherence superconducting qubits has led to the adoption of new materials and innovative fabrication techniques. Among the commonly used superconducting materials, tantalum-based or tantalum-capped superconducting qubits have demonstrated the longest lifetimes, outperforming niobium devices even in the presence of their native oxides. Given the losses introduced by the surface oxide, one method to further improve performance is to reduce or eliminate the native oxide on tantalum through UHV annealing. In this work, we examine the effect of dissolved oxygen as a function of annealing temperature on the superconducting properties of tantalum thin films. Dissolved oxygen is quantified using atom probe tomography (APT) and secondary ion mass spectrometry (TOF-SIMS) and correlated with electromagnetic transport measurements performed using a Physical Property Measurement System (PPMS). This study observes that annealing decomposes the native oxide and drives oxygen diffusion into the film matrix. Increasing oxygen content decreases the superconducting transition temperature (Tc) and the residual resistivity ratio (RRR). The critical field decreases with the incorporation of oxygen, while the film’s coherence length decreases relatively by 5%. These results, as well as findings from ongoing studies linking fabrication processes to the structural and chemical properties of the superconducting film and Josephson junction, provide insight into effective strategies for improving the performance of superconducting devices.
Shinde, Maithilee [IIT, Chicago; Fermilab]↗
Innovative Accident Tolerant Fuel Materials May Help Extending the Life of Light Water Reactors: A Perspective
One of the main sources of clean electricity in the civilian power grid comes from light water reactors (LWRs). Some of these LWRs are being decommissioned prematurely because they may not be economically sustainable. It is proposed that the use of accident-tolerant fuel concepts may enable for LWR plant operation extension by making them safer and more economically competitive to operate. For example, the use of iron-chromium-aluminum (FeCrAl) alloys for the cladding of the fuel would not only reduce the risk of catastrophic reaction between the cladding and its environment in the case of a loss of coolant accident situation but also, for example, allow for higher fuel burnup during normal plant operation.
Materials Science↗
INNOVATIONS IN NUCLEAR REFERNCE MATERIALS
Explore the source record for details and available documents.
Morales-Arteaga, Maria↗
Enhanced coercivity in Fe5C2/SiO2 core/shell nanocrystals
Rod-shaped Fe5C2 and core/shell Fe5C2/SiO2 nanocrystals were synthesized via a solution-based chemical method. Structural analysis confirmed the monoclinic phase of Fe5C2 with space group C2/c. Zero-field-cooling (ZFC) and field-cooling (FC) magnetization curves revealed distinct magnetic behaviors: uncoated Fe5C2 exhibited a low-temperature FC plateau indicative of strong dipolar interactions, while Fe5C2/SiO2 showed a monotonic increase in FC magnetization, suggesting reduced dipolar interactions due to SiO2 surface passivation. Isothermal remanent magnetization (IRM) and DC demagnetization (DCD) measurements supported this trend, with δM plots confirming weaker dipolar interactions in the coated sample. Bloch’s law fitting of temperature-dependent saturation magnetization showed a smaller Bloch’s constant for pure Fe5C2 and a larger value for Fe5C2/SiO2, reflecting enhanced surface disorder and reduced exchange coupling in the latter. Notably, Fe5C2/SiO2 demonstrated increased coercivity, attributed to decreased dipolar interaction and elevated surface anisotropy. Kneller’s law fitting yielded higher blocking temperatures for Fe5C2 (476 K) than Fe5C2/SiO2 (456 K), highlighting the impact of dipolar interactions on magnetic relaxation. These findings illustrate how SiO2 coatings effectively modulate dipolar interactions and enhance coercivity in Fe5C2 nanocrystals.
Joshi, Pramanand [Department of Physics, Universit↗
Role of Si substitution in modulating the coercivity and magnetic anisotropy in Fe3CoB2 nanocrystallites
In this work, we report the impact of Si substitution on the structural and magnetic properties of Fe3CoB2 nanocrystallites as a rare-earth-free hard-magnet candidate. X-ray diffraction confirmed the formation of the tetragonal phase with an average crystallite size of ∼40 nm, while the transmission electron microscopy image revealed nanosized crystallites embedded in an amorphous matrix. Room-temperature Mössbauer spectra exhibited two sextets and two doublets, indicating magnetically ordered Fe sites in the tetragonal phase along with high-spin paramagnetic FeIII species in disordered regions. ZFC–FC magnetization curves displayed field-dependent blocking behavior, consistent with paramagnetic Fe species. Singular point detection measurements revealed a high anisotropy field of ∼10.7 kOe in the pristine Fe3CoB2, and systematically decreased with Si substitution. Magnetization measurements revealed a monotonic decrease in saturation magnetization with Si content, while coercivity was observed to increase, likely due to microstructural refinement. These results establish Fe3CoB2 as a rare-earth-free material with strong magnetic anisotropy, ideal for hard magnets.
Abbas, Hur [Department of Physics, University of T↗