Czochralski-type crystal growth in transverse magnetic fields
Te-doped inSb single crystal growth in transverse magnetic fields, using Czochralski crystal puller
Gatos, H. C.↗
SEARCH · Engineering Papers
Results for “InSb”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
A 35-GHz isolator using a coaxial solid- state plasma in a longitudinal magnetic field
Millimeter wave semiconductor isolator using circular waveguide with coaxial n-type InSb in longitudinal magnetic field
May, W. G.↗
The use of semiconductors in nonreciprocal devices for submillimeter wavelengths.
This paper reviews the use of anisotropic effects in a passive semiconductor magnetoplasma for the development of submillimeter isolators and circulators. The emphasis is on two schemes that are applicable over the far infrared portion of the spectrum. The theory of transmission devices depending on Faraday rotation is described, and experiments are discussed. At far infrared wavelengths it is not necessary to cool the semiconductor in order to achieve low forward loss. Some experimental results are available in this frequency range, and a theoretical evaluation of device performance is given. Reflection devices in which the desired signal does not propagate through the semiconductor, but is reflected off of its surface, are also discussed. Experimental results show that these devices can have a low forward loss; a variety of novel geometrical arrangements are able to improve isolator performance. Theoretical results indicating satisfactory performance for a far infrared isolator using InSb at room temperature are presented.
Hayes, R. E.↗
Nonreciprocal reflection-beam isolators for far-infrared use
Magnetoplasma reflection-beam isolators for submillimeter-wave use are discussed in theory and experiment. The basic device uses the Kerr transverse magnetooptic effect (plane of polarization of the EM wave in the plane of incidence, which is perpendicular to a dc magnetic field) in InSb near room temperature. When the semiconductor slab is covered with a thin dielectric layer acting as a matching transformer, improved performance is predicted and observed at 337 microns, and very efficient isolator performance is predicted for 118 microns. Physical arguments are presented to explain the nonreciprocal phenomenon and lead to better device design.
Kanda, M.↗
Investigation of the Kramers-Kronig analysis - Revised optical constants of AgCl
White and Straley (1968) have reported room-temperature optical constants for AgCl that exhibit negative, unphysical dips at the band edge. Because Morrison (1961) also obtained such behavior for InAs, InSb, and GaAs, a study is made of the possible sources of this anomaly. An artifact of the experimental reflectance data near this energy is found to be responsible. No defect in the Kramers-Kronig transform or its use is implied, contrary to some suggestions. The corrected optical constants of AgCl were modified by about 10% up to 5 eV, whereas at higher energies they were barely affected. Thus Kramers-Kronig-deduced optical constants that exhibit unusual structure are not affected by this structure at other energies. The new AgCl results are presented, and assignments are briefly discussed.
Bauer, R. S.↗
Reflection beam isolator for submillimeter wavelengths
Magnetoplasma reflection beam isolators for submillimeter wave use are discussed. The basic configuration used is that of the Kerr transverse magneto-optical effect. Theoretical and experimental data at 337 microns using InSb as a plasma are given.
Kanda, M.↗
Hollow-cylinder waveguide isolators for use at millimeter wavelengths
A semiconductor waveguide isolator consisting of a hollow column of a semiconductor mounted coaxially is considered in a circular waveguide in a longitudinal dc magnetic field. An elementary and physical analysis based on the excitation of plane waves in the guide and a more rigorous mode matching analysis are presented. These theoretical predictions are compared with experimental results for an InSb isolator at 94GHz and 75 K.
Kanda, M.↗
Indium antimonide crystal growth experiment M562
It was established that ideal diffusion controlled steady state conditions, never accomplished on earth, were achieved during the growth of Te-doped InSb crystals in Skylab. Surface tension effects led to nonwetting conditions under which free surface solidification took place in confined geometry. It was further found that, under forced contact conditions, surface tension effects led to the formation of surface ridges (not previously observed on earth) which isolated the growth system from its container. In addition, it was possible, for the first time, to identify unambiguously: the origin of segregation discontinuities associated with facet growth, the mode of nucleation and propagation of rotational twin boundaries, and the specific effect of mechanical-shock perturbations on segregation. The results obtained prove the advantageous conditions provided by outer space. Thus, fundamental data on solidification thought to be unattainable because of gravity-induced interference on earth are now within reach.
Gatos, H. C.↗
Containerless processing of single crystals in low-G environment
Experiments on containerless crystal growth from the melt were conducted during Skylab missions SL3 and SL4 (Skylab Experiment M-560). Six samples of InSb were processed, one of them heavily doped with selenium. The concept of the experiment is discussed and related to general crystal growth methods and their merits as techniques for containerless processing in space. The morphology of the crystals obtained is explained in terms of volume changes associated with solidification and wetting conditions during solidification. All samples exhibit extremely well developed growth facets. Analysis by X-ray topographical methods and chemical etching shows that the crystals are of high structural perfection. Average dislocation density as revealed by etching is of the order of 100 per sq cm; no dislocation clusters could be observed in the space-grown samples. A sequence of striations that is observed in the first half of the selenium-doped sample is explained as being caused by periodic surface breakdown.
Walter, H. U.↗
Hollow-cylinder waveguide isolators for use at millimeter wavelengths
The device considered in this study is a semiconductor waveguide isolator consisting of a hollow column of a semiconductor mounted coaxially in a circular waveguide in a longitudinal dc magnetic field. An elementary and physical analysis based on the excitation of plane waves in the guide and a more rigorous mode-matching analysis (MMA) are presented. These theoretical predictions are compared with experimental results for an InSb isolator at 94 GHz and 75 K.
Kanda, M.↗
Skylab M518 multipurpose furnace convection analysis
An analysis was performed of the convection which existed on ground tests and during skylab processing of two experiments: vapor growth of IV-VI compounds growth of spherical crystals. A parallel analysis was also performed on Skylab experiment indium antimonide crystals because indium antimonide (InSb) was used and a free surface existed in the tellurium-doped Skylab III sample. In addition, brief analyses were also performed of the microsegregation in germanium experiment because the Skylab crystals indicated turbulent convection effects. Simple dimensional analysis calculations and a more accurate, but complex, convection computer model, were used in the analysis.
Bourgeois, S. V.↗
J, H, K photometry of 433 Eros and other asteroids
Results are reported for IR photometry of nine bright asteroids, including 433 Eros, which was conducted in the J, H, K, and (for Eros) L bands with an InSb photometer on the 1.3-m Kitt Peak telescope. It is found that the J-H and H-K color indices of all nine asteroids are slightly redder than those of the sun and that three C-type objects are somewhat redder in the same color indices than four S-types and an E-type. Eros is shown to have an unusually red J-K index; the shape of its IR spectral reflectance curve is attributed in part to the presence of the weak 2-micron pyroxene absorption band in the spectrum. The results show that JHK photometry is less diagnostic of asteroidal composition than higher-resolution IR spectrophotometry.
Chapman, C. R.↗
Laboratory studies of the diffuse reflectance spectra of frosts and minerals occurring on astronomical objects
A vacuum monochromator was integrated into the system and optics chosen to increase data collection in the infrared spectral region. Using a InSb detector, good reflectance data was obtained to 5.5 micron from a variety of samples including magnesium oxide, barium sulfate, water frost and Bloedite. Magnesium oxide was found to be a poorer reflector than the barium sulfate throughout the visible and near infrared region. The barium sulfate material was shown to be a Lambert reflector in the visible region and over an angular range of 60 deg. Several samples of water frost were prepared and in reflectance measured from 0.3 micron to 5.5 microm. The fine grained frosts were better reflectors than the coarse grained frosts, usually by 20 percent or more, over the entire spectral range. The minerals Bloedite and sulfur were also investigated further.
Glaser, F. M.↗
Effects of systemic and non-systemic stresses on the thermal characteristics of corn
Experiments were conducted on corn plants using a calibrated spectroradiometer under field conditions in the indium antimonide channel (InSb, 2.8 to 5.6 mm) and the mercury cadmium telluride channel (HgCdTe, 7 to 14 mm). A ground cover experiment, an experiment on nonsystemic corn plants, and an experiment on systemic-stressed corn plants were included. The average spectral radiance temperature of corn plant populations was found (1) to be statistically significantly different for four healthy corn plant populations, (2) to increase with increased blight severity, and (3) to be statistically significantly different for varying rates of nitrogen applications.
Kumar, R.↗
Portable He-3 detector cryostat for the far infrared
The design of a portable He-3 cryostat for far infrared detection applications is described, with a cutaway drawing of the cryostat, including bolometer and cooled optics, provided. Consideration is given to the selection and testing of various bolometer materials, including Ge:Ga and Ge:InSb; the resistance-temperature coefficients of the materials examined are presented. The absolute flux calibration of the detector system using a new temperature-modulated cold source method is described.
Radostitz, J. V.↗
Germane in the atmosphere of Jupiter
Germane, GeH4, is a tetrahedral molecule like methane. The nu 3 fundamental mode of GeH4 falls in the middle of the 5-micrometer Jupiter window. Jupiter observations were made in December 1975 during three flights with the 0.9-m telescope of the Kuiper Airborne Observatory. The spectrometer is a rapid-scanning Michelson interferometer having InSb detectors at each of the two outputs. The germane identification procedure is based on a comparison of the obtained Jupiter spectrum with that of laboratory germane. It appears that the detection of GeH4 in Jupiter's atmosphere with a mixing ratio of 0.6 ppb is the smallest concentration of a trace constituent yet detected in a nonterrestrial planetary atmosphere. It is pointed out that a strict interpretation of thermochemical equilibrium predictions for the spectral line forming regions of Jupiter's atmosphere does not explain the observation of GeH4.
Fink, U.↗
Support for joint infrared and Copernicus X-Ray observations of Cygnus X-3
Simultaneous X-ray and infrared measurements were carried out of the flares from Cygnus X-3 from the Copernicus spacecraft observatory. The detectors, InSb, were arranged so that 1.65 and 2.2 micrometer broadbend photometry was performed through a common diaphragm. The measurements were used to determine the energy distribution during a flare and thus learn about the infrared spectrum and its changes during the flare.
Source record↗
The TIROS-N high resolution infrared radiation sounder
The high-resolution infrared radiation sounder (HIRS/2) was developed and flown on the Television and Infrared Observation Satellite, N Series (TIROS-N) as one means of obtaining atmospheric vertical profile information. The HIRS/2 receives visible and infrared spectrum radiation through a single telescope and selects 20 narrow spectral channels by means of a rotating filter wheel. A passive radiant cooler provides an operating temperature of 106.7K for the HgCdTe and InSb detectors while the visible detector operates at instrument frame temperature. Low noise amplifiers and digital processing provide 13 bit data for spacecraft data multiplexing and transmission. The qualities of system performance that determine sounding capability are the dynamic range of data collection, the noise equivalent radiance of the system, the registration of the air columns sampled in each channel, and the ability to upgrade the calibration of the instrument to maintain the performance standard throughout life. The basic performance of the instrument in test is described. Early orbital information from the TIROS-N launched on October 13, 1978 are given and some observations on system quality are made.
Koenig, E. W.↗