Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INDIUM ARSENIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

On the Impact of Barrier-Layer Doping on the Photoluminescence Efficiency of InGaAlAs/InGaAs/InP Strained-Layer Heterostructures

The photoluminescence of strained InGaAlAs/InGaAs/InP heterostructures with an active region consisting of nine In{sub 0.74}Ga{sub 0.26}As quantum wells and δ-doped In{sub 0.53}Al{sub 0.20}Ga{sub 0.27}As barrier layers grown by molecular beam epitaxy on an InP(100) substrate is investigated. Analysis of the photoluminescence spectra demonstrates that p-type doping leads to an increase in the photoluminescence efficiency at low excitation levels in comparison to a heterostructure with undoped barriers, and increasing the level of barrier doping to (1–2) × 10{sup 12} cm{sup –2} results in the suppression of nonradiative recombination.

36 MATERIALS SCIENCE↗

A Search for Asymmetric Barrier Layers for 1550 nm Al-Free Diode Lasers

A search for materials suitable for implementation of 1.55 µm Al-free diode lasers based on InP with asymmetric barrier (AB) layers is conducted. It is shown that a very high (over 10{sup 6}) suppression ratio of the parasitic electron flux can be achieved using common III–V alloys for the ABs. Hence placing such ABs in the immediate vicinity of the active region should completely suppress the parasitic recombination in the waveguide. Several optimal AB designs are proposed that are based on one of the following alloys: Al-free GaInPSb, ternary AlInAs, or quaternary AlGaInAs with a low Al-content. As an important and beneficial byproduct of utilization of such ABs, an improvement of majority carrier capture into the active region occurs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spontaneous Emission and Lasing of a Two-Wavelength Quantum-Cascade Laser

The results of experiments on the fabrication (by molecular-beam epitaxy) and investigation of the heterostructures of a two-frequency quantum-cascade laser produced on the basis of a heteropair of In{sub 0.53}Ga{sub 0.47}As/Al{sub 0.48}In{sub 0.52}As solid solutions on an InP substrate are presented. The heterostructures contained quantum cascades emitting at a wavelength of 9.6 μm and cascades emitting at a wavelength of 7.6 μm. The high structural quality of the fabricated heterostructures is shown. The spontaneous emission and lasing spectra are investigated and the multimodal laser generation of stripe lasers at a wavelength of 7.6 μm is demonstrated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

On the Combined Application of Raman Spectroscopy and Photoluminescence Spectroscopy for the Diagnostics of Multilayer Heterostructures

The results of studying GaInAs/GaInP/GaAs photodiode structures grown by metal–organic vapor-phase epitaxy are reported. A procedure for the diagnostics of such multilayer structures is developed. The procedure is based on the application of Raman spectroscopy in combination with photoluminescence spectroscopy in the mode of the lateral scanning of transverse cleavages. The compositions of the GaInAs and GaInP solid solutions are determined.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Photoconductive detector of circularly polarized radiation based on a MIS structure with a CoPt layer

A photoconductive detector of circularly polarized radiation based on the metal–insulator–semiconductor structure of CoPt/(Al{sub 2}O{sub 3}/SiO{sub 2}/Al{sub 2}O{sub 3})/InGaAs/GaAs is created. The efficiency of detection of circularly polarized radiation is 0.75% at room temperature. The operation of the detector is based on the manifestation of the effect of magnetic circular dichroism in the CoPt layer, that is, the dependence of the CoPt transmission coefficient on the sign of the circular polarization of light and magnetization.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Heterobarrier Varactors with Nonuniformly Doped Modulation Layers

Optimum shape of the capacitance–voltage (C–V) characteristic is a critical parameter determining the efficiency of frequency multiplication in heterobarrier varactors (HBVs) operating in the millimeter and submillimeter frequency ranges. A numerical model for calculating the C–V characteristics and leakage currents of HBV heterostructures with arbitrary composition and doping profiles has been verified on the basis of published and original experimental data. A specially designed HBV heterostructure with three undoped InAlAs/AlAs/InAlAs barriers surrounded by nonuniformly doped n-InGaAs modulation layers has been grown by molecular beam epitaxy on InP substrate. Prototype HBVs manufactured using the proposed heterostructure demonstrated a nearly cosine shape of the C–V curve at bias voltages up to 2 V, increased overlap capacitance, and low leakage currents.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Background-limited Imaging in the Near Infrared with Warm InGaAs Sensors: Applications for Time-domain Astronomy

We describe test observations made with a customized 640 × 512 pixel indium gallium arsenide (InGaAs) prototype astronomical camera on the 2.5 m DuPont telescope. This is the first test of InGaAs as a cost-effective alternative to HgCdTe for research-grade astronomical observations. The camera exhibits a background of 113 e{sup –} s{sup –1}/pixel (dark + thermal) at operating sensor temperature T = −40°C, maintained by a simple thermoelectric cooler. The optomechanical structure floats at ambient temperature with no cold stop, unlike most IR instruments which must be cooled to mitigate thermal backgrounds. Measurements of the night sky using a reimager scaled at 0.″4/pixel show that the sky flux in Y is comparable to the dark current. At J the sky exceeds dark current by a factor of four, dominating the noise budget. The read noise (∼43 e{sup −}) falls below sky + dark noise for exposures of t > 7 s in Y and 3.5 s in J. We observed several representative science targets, including two supernovae, a z = 6.3 quasar, two local galaxies monitored for IR transients, and a galaxy cluster at z = 0.87. We observe a partial transit of the hot Jupiter HATS-34b, demonstrating the photometric stability to detect a 1.2% transit. A tiling of larger-format sensors would produce an IR survey instrument with significant cost savings relative to HgCdTe-based cameras, if one is willing to forego the K band. Such a camera would be sensitive for a week or more to isotropic emission from r-process kilonova ejecta similar to that observed in GW170817, over the full 190 Mpc horizon of Advanced LIGO.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Basal-plane growth of cadmium arsenide by molecular beam epitaxy

(001)-oriented thin films of the three-dimensional Dirac semimetal cadmium arsenide can realize a quantum spin Hall insulator and other kinds of topological physics, all within the flexible architecture of epitaxial heterostructures. Here, we report a method for growing (001) cadmium arsenide films using molecular beam epitaxy. The introduction of a thin indium arsenide wetting layer improves surface morphology and structural characteristics, as measured by x-ray diffraction and reflectivity, atomic force microscopy, and scanning transmission electron microscopy. The electron mobility of 50-nm-thick films is found to be 9300cm 2 /Vs at 2 K, comparable to the highest-quality films grown in the conventional (112) orientation. This work demonstrates a simple experimental framework for exploring topological phases that are predicted to exist in proximity to the three-dimensional Dirac semimetal phase.

36 MATERIALS SCIENCE↗

Ohmic contact formation process on low n-type gallium arsenide (GaAs) using indium gallium zinc oxide (IGZO)

Highlights: • We propose a method to fabricate non-gold Ohmic contact on low n-type GaAs with IGZO. • 0.15 A/cm{sup 2} on-current and 1.5 on/off-current ratio are achieved in the junction. • InAs and InGaAs formed by this process decrease an electron barrier height. • Traps generated by diffused O atoms also induce a trap-assisted tunneling phenomenon. - Abstract: Here, an excellent non-gold Ohmic contact on low n-type GaAs is demonstrated by using indium gallium zinc oxide and investigating through time of flight-secondary ion mass spectrometry, X-ray photoelectron spectroscopy, transmission electron microscopy, J–V measurement, and H [enthalpy], S [entropy], Cp [heat capacity] chemistry simulation. In is diffused through GaAs during annealing and reacts with As, forming InAs and InGaAs phases with lower energy bandgap. As a result, it decreases the electron barrier height, eventually increasing the reverse current. In addition, traps generated by diffused O atoms induce a trap-assisted tunneling phenomenon, increasing generation current and subsequently the reverse current. Therefore, an excellent Ohmic contact with 0.15 A/cm{sup 2} on-current density and 1.5 on/off-current ratio is achieved on n-type GaAs.

36 MATERIALS SCIENCE↗

Fast Near-Infrared Photodetection Using III–V Colloidal Quantum Dots

Colloidal quantum dots (CQDs) are promising materials for infrared (IR) light detection due to their tunable bandgap and their solution processing; however, to date, the time response of CQD IR photodiodes is inferior to that provided by Si and InGaAs. It is reasoned that the high permittivity of II–VI CQDs leads to slow charge extraction due to screening and capacitance, whereas III–Vs—if their surface chemistry can be mastered—offer a low permittivity and thus increase potential for high-speed operation. In initial studies, it is found that the covalent character in indium arsenide (InAs) leads to imbalanced charge transport, the result of unpassivated surfaces, and uncontrolled heavy doping. Surface management using amphoteric ligand coordination is reported, and it is found that the approach addresses simultaneously the In and As surface dangling bonds. The new InAs CQD solids combine high mobility (0.04 cm 2 V -1 s -1 ) with a 4× reduction in permittivity compared to PbS CQDs. Finally, the resulting photodiodes achieve a response time faster than 2 ns—the fastest photodiode among previously reported CQD photodiodes—combined with an external quantum efficiency (EQE) of 30% at 940 nm.

36 MATERIALS SCIENCE↗

Photoluminescence up to 1.6 {mu}m of quantum dots with an increased effective thickness of the InAs layer

Multilayered InAs/GaAs quantum dot (QD) heterostructures are produced by metal-organic gas phase epitaxy. The structures exhibit photoluminescence around 1.55 {mu}m at 300 K. The specific feature of the technology is the growth of an InAs layer with an increased effective thickness d{sub eff} to form QDs, in combination with low-temperature overgrowth of the QDs with a thin (6-nm) GaAs layer and with the annelaing of defects. By X-ray diffraction analysis and PL studies, it is shown that, in a structure with the increased thickness d{sub eff}, a secondary wetting InGaAs layer is produced on top of the QD layer from the growing relaxed large-sized InAs clusters on annealing. A new mechanism of formation of large-sized QDs characterized by a large 'aspect ratio' is suggested. The mechanism involves the 2D-3D transformation of the secondary InGaAs layer in the field of elastic strains in previously formed QDs. The specific feature of the array of QDs is the coexistence of three populations of different-sized QDs responsible for the multimode photoluminescence in the range from 1 to 1.6 {mu}m. The potentialities of such structures for infrared photoelectric detectors operating in the range from 1-2.5 {mu}m at room temperature are analyzed.

36 MATERIALS SCIENCE↗

InAs{sub 0.45}P{sub 0.55}/InP strained multiple quantum wells intermixed by inductively coupled plasma etching

The intermixing effect on InAs{sub 0.45}P{sub 0.55}/InP strained multiple quantum wells (SMQWs) by inductively coupled plasma (ICP) etching and rapid thermal annealing (RTA) is investigated. Experiments show that the process of ICP etching followed RTA induces the blue shift of low temperature photoluminescence (PL) peaks of QWs. With increasing etching depth, the PL intensities are firstly enhanced and then diminished. This phenomenon is attributed to the variation of surface roughness and microstructure transformation inside the QW structure during ICP processing.

36 MATERIALS SCIENCE↗

Effect of post-growth rapid thermal annealing on bilayer InAs/GaAs quantum dot heterostructure grown with very thin spacer thickness

We have investigated the effect of post-growth rapid thermal annealing on self-assembled InAs/GaAs bilayer quantum dot samples having very thin barrier thickness (7.5-8.5 nm). In/Ga interdiffusion in the samples due to annealing is presumed to be controlled by the vertical strain coupling from the seed dots in bilayer heterostructure. Strain coupling from embedded seed QD layer maintains a strain relaxed state in active top islands of the bilayer quantum dot sample grown with comparatively thick spacer layer (8.5 nm). This results in minimum In/Ga interdiffusion. However controlled interdiffusion across the interface between dots and GaAs barrier, noticeably enhances the emission efficiency in such bilayer quantum dot heterostructure on annealing up to 700 {sup o}C.

36 MATERIALS SCIENCE↗

Effect of high energy proton irradiation on InAs/GaAs quantum dots: Enhancement of photoluminescence efficiency (up to {approx}7 times) with minimum spectral signature shift

Graphical abstract: Authors demonstrate enhancement in photoluminescence efficiency (7 times) in single layer InAs/GaAs quantum dots using proton irradiation without any post-annealing treatment via either varying proton energy (a) or fluence (b). The increase in PL efficiency is explained by a proposed model before (c) and after irradiation (d). Highlights: {yields} Proton irradiation improved PL efficiency in InAs/GaAs quantum dots (QDs). {yields} Proton irradiation favoured defect and strain annihilation in InAs/GaAs QDs. {yields} Reduction in defects/non-radiative recombination improved PL efficiency. {yields} Protons could be used to improve PL efficiency without spectral shift. {yields} QD based devices will be benefited by this technique to improve device performance. -- Abstract: We demonstrate 7-fold increase of photoluminescence efficiency in GaAs/(InAs/GaAs) quantum dot hetero-structure, employing high energy proton irradiation, without any post-annealing treatment. Protons of energy 3-5 MeV with fluence in the range (1.2-7.04) x 10{sup 12} ions/cm{sup 2} were used for irradiation. X-ray diffraction analysis revealed crystalline quality of the GaAs cap layer improves on proton irradiation. Photoluminescence study conducted at low temperature and low laser excitation density proved the presence of non-radiative recombination centers in the system which gets eliminated on proton irradiation. Shift in photoluminescence emission towards higher wavelength upon irradiation substantiated the reduction in strain field existed between GaAs cap layer and InAs/GaAs quantum dots. The enhancement in PL efficiency is thus attributed to the annihilation of defects/non-radiative recombination centers present in GaAs cap layer as well as in InAs/GaAs quantum dots induced by proton irradiation.

36 MATERIALS SCIENCE↗

Comparison of luminescence properties of bilayer and multilayer InAs/GaAs quantum dots

Highlights: Black-Right-Pointing-Pointer We seek to compare the optical behavior of coupled bilayer and multilayer QDs. Black-Right-Pointing-Pointer The coupled InAs/GaAs QD stacks are grown by Stranski-Krastanow growth technique. Black-Right-Pointing-Pointer We comment on roles of vertical strain and electronic coupling along the stacks. -- Abstract: Coupled InAs/GaAs quantum dots have generated an interest for their longer emission wavelength and narrower line-width. However, a consensus has not been reached on the parameters of growth required to achieve a desired effect from coupling due to contradictory reports of shorter emission wavelengths. In this paper, we seek to compare the luminescence properties of bilayer quantum dots (BQDs) with those of multilayer quantum dots (MQDs), grown at a very low deposition rate, keeping all parameters constant. The BQD and MQD samples were grown by solid source MBE at a slow growth rate of 0.03 ML/s. A blueshift in the PL spectra for 11 layer coupled InAs/GaAs MQD heterostructure is observed compared to the BQDs for temperatures less than 180 K. This undesired blueshift is attributed to strain in the structure which overshadowed the usual redshift in emission wavelength in such structures due to electronic coupling. The variation in PL line-width with temperature in the MQD structure is found to be much lower than in the BQD. However the PL intensity of the MQDs fall at a faster rate with temperature compared to the BQD sample, due to strain generated non-radiative centers in the islands which favors in thermalization of carriers.

36 MATERIALS SCIENCE↗

The impact of monolayer coverage, barrier thickness and growth rate on the thermal stability of photoluminescence of coupled InAs/GaAs quantum dot hetero-structure with quaternary capping of InAlGaAs

Highlight: Black-Right-Pointing-Pointer Coupled InAs/GaAs MQDs with (In{sub 0.21}Al{sub 0.21}Ga{sub 0.58}As + GaAs) caps are considered. Black-Right-Pointing-Pointer Monolayer coverage, barrier thickness and growth rate of the dots are the factors. Black-Right-Pointing-Pointer PL peaks for the samples are within 1.1-1.3 {mu}m; significant for IBSCs and lasers. Black-Right-Pointing-Pointer NPTP (non-resonant multi-phonon assisted tunneling process) effect on FWHM of PL. -- Abstract: The self-assembled InAs/GaAs MQDs are widely investigated for their potential application in optoelectronic devices like lasers and photovoltaics. We have explored the effect of QD growth rate and structural parameters like capping layer thickness on the morphology and optical properties of the MQD heterostructures overgrown with a combination capping of InAlGaAs and GaAs. The growth rate of the seed layers in the MQD samples is also varied to investigate its effect in the vertical stacking of the islands. The change in the morphology and the optical properties of the samples due to variation in growth and structural parameters are explained by the presence of strain in the QD structures, which arises due to lattice mismatch.

36 MATERIALS SCIENCE↗

A detailed investigation on the impact of post-growth annealing on the materials and device characteristics of 35-layer In{sub 0.50}Ga{sub 0.50}As/GaAs quantum dot infrared photodetector with quaternary In{sub 0.21}Al{sub 0.21}Ga{sub 0.58}As capping

Highlights: ► We investigated the effect of ex situ annealing on InGaAs/GaAs QDIP with InAlGaAs layer. ► As-grown defect was removed by using post-growth annealing treatment. ► Increase in the compressive strain due to annealing is calculated from XRD curve. ► Three-fold enhancement in responsivity is observed in the QDIPs annealed at 650 °C. ► Two-fold enhancement in D* is observed sample annealed at 650 °C compared to as grown. -- Abstract: The effect of post-growth rapid thermal annealing on 35-layer In{sub 0.50}Ga{sub 0.50}As/GaAs quantum dot infrared photodetector (QDIP) with quaternary In{sub 0.21}Al{sub 0.21}Ga{sub 0.58}As capping has been investigated. Transmission electron microscopy showed some as-grown defects were removed by post growth annealing treatment. An increase in the compressive strain in the heterostructure due to annealing was identified from X-ray diffraction curve. A two-color photoresponse in the long-wave region (8.5 and 10.2 μm) was observed in both as-grown device and those annealed at 650 °C temperature. A three-fold enhancement in peak responsivity was observed in the QDIPs annealed at 650 °C (1.19 A/W) compared to that in the as-grown (0.34 A/W). Detectivity also increased by two fold from as-grown to 650 °C annealed device. The changes are attributed to the removal of as-grown defects and dislocations during epitaxial growth. These removals changed the confinement potential profile, which resulted in an improvement in the detectivity and responsivity of the annealed sample.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Proposed mechanism to represent the suppression of dark current density by four orders with low energy light ion (H{sup −}) implantation in quaternary alloy-capped InAs/GaAs quantum dot infrared photodetectors

Graphical abstract: - Abstract: Here we propose a carrier transport mechanism for low energy H{sup −} ions implanted InAs/GaAs quantum dot infrared photodetectors supportive of the experimental results obtained. Dark current density suppression of up to four orders was observed in the implanted quantum dot infrared photodetectors, which further demonstrates that they are effectively operational. We concentrated on determining how defect-related material and structural changes attributed to implantation helped in dark current density reduction for InAs/GaAs quantum dot infrared photodetectors. This is the first study to report the electrical carrier transport mechanism of H{sup −} ion-implanted InAs/GaAs quantum dot infrared photodetectors.

36 MATERIALS SCIENCE↗