Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “IAC”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Strength-conductivity synergy via lean alloy design: A study on novel solid stir extrusion of an Al-2Cu-0.1 Nb-0.15Zr (~wt.%) alloy

Aluminum alloys find wide applications in power and transmission cables, and electrical conductors due to their advantageous properties of high electrical conductivity, and lower cost per unit. However, the lower tensile strength compared to copper poses a challenge for the mechanical stability of aluminum-based cables. In this study, we addressed this issue by adopting a process-based alloy design approach, creating a lean alloy with a dilute composition of Al-2Cu-0.1 Nb-0.15Zr (~wt.%). Here, the alloy was processed using a friction stir based novel SolidStir® (SSE) technique, followed by low-temperature aging. The resulting aluminum wire exhibited improved strength (240 MPa) while simultaneously enhancing electrical conductivity (64%IACS). The study employed computational simulations (Thermocalc) and experimental techniques (differential scanning calorimetry and transmission electron microscopy) to thoroughly investigate the microstructure. Microstructural examinations revealed that the precipitation kinetics in SSE and SSE+aged conditions played a significant role in enhancing strength and electrical conductivity. These findings demonstrate the successful achievement of high strength and high electrical conductivity in aluminum wire through a lean alloy design approach.

36 MATERIALS SCIENCE↗

Evaluation of high strength, high conductivity CuNiBe alloys for fusion energy applications

The unirradiated tensile properties for several different heats and thermomechanical treatment conditions of precipitation strengthened Hycon 3HPTM CuNiBe (Cu-2%Ni-0.35%Be in wt.%) have been measured over the temperature range of 20-500 C for longitudinal and long transverse orientations. The room temperature electrical conductivity has also been measured for several heats, and the precipitate microstructure was characterized using transmission electron microscopy. The CuNiBe alloys exhibit very good combination of strength and conductivity at room temperature, with yield strengths of 630-725 MPa and electrical conductivities of 65-72% International Annealed Copper Standard (IACS). The strength remained relatively high at all test temperatures, with yield strengths of 420-520 MPa at 500 C. However, low levels of ductility (<5% uniform elongation) were observed at test temperatures above 200-250 C, due to flow localization near grain boundaries (exacerbated by having only 10-20 grains across the gage thickness of the miniaturized sheet tensile specimens). Scanning electron microscopy observation of the fracture surfaces found a transition from ductile transgranular to ductile intergranular fracture with increasing test temperature. Fission neutron irradiation to a dose of ~0.7 displacements per atom (dpa) at temperatures between 100 and 240 C produced a slight increase in strength and a significant decrease in ductility. The measured tensile elongation increased with increasing irradiation temperature, with a uniform elongation of ~3.3% observed at 240 C. The electrical conductivity decreased slightly following irradiation, due to the presence of defect clusters and Ni, Zn, Co transmutation products. Considering also previously published fracture toughness data, this indicates that CuNiBe alloys have irradiated tensile and electrical properties comparable or superior to CuCrZr and oxide dispersion strengthened copper at temperatures <250 C, and may be an attractive candidate for certain fusion energy structural applications. Conversely, CuNiBe may not be preferred at intermediate temperatures of 250-500 C due to the poor ductility and fracture toughness of CuNiBe alloys at temperatures >250 C. The potential deformation mechanisms responsible for the transition from transgranular to intergranular fracture are discussed. The possible implications for other precipitation hardened alloys such as nickel based superalloys are briefly discussed.

Zinkle, Steven J↗

Strengthening of Cu–Ni–Si alloy using high-pressure torsion and aging

An age-hardenable Cu–2.9%Ni–0.6%Si alloy was subjected to high-pressure torsion. Aging behavior was investigated in terms of hardness, electrical conductivity and microstructural features. Transmission electron microscopy showed that the grain size is refined to ∼ 150 nm and the Vickers microhardness was significantly increased through the HPT processing. Aging treatment of the HPT-processed alloy led to a further increase in the hardness. Electrical conductivity is also improved with the aging treatment. It was confirmed that the simultaneous strengthening by grain refinement and fine precipitation is achieved while maintaining high electrical conductivity. Three dimensional atom probe analysis including high-resolution transmission electron microscopy revealed that nanosized precipitates having compositions of a metastable Cu{sub 3}Ni{sub 5}Si{sub 2} phase and a stable NiSi phase were formed in the Cu matrix by aging of the HPT-processed samples and these particles are responsible for the additional increase in strength after the HPT processing. - Highlights: • Grain refinement is achieved in Corson alloy the size of ∼150nm by HPT. • Aging at 300°C after HPT leads to further increase in the mechanical property. • Electrical conductivity reaches 40% IACS after aging for 100 h. • 3D-APT revealed the formation of nanosized-precipitates during aging treatment. • Simultaneous hardening in both grain refinement and precipitation is achieved.

36 MATERIALS SCIENCE↗

Correlation between microstructures and mechanical properties of cryorolled CuNiSi alloys with Cr and Zr alloying

Highlights: • Annihilation of dislocations was suppressed by Cr alloying to CuNiSi alloys. • Cr alloying to CuNiSi alloys hinders the kinetics and refines precipitates. • Zr alloying to CuNiSi alloys promotes the growth and kinetics of precipitates. • The mechanical properties were quantitatively related to the microstructures. - Abstract: Due to their high strength and high electrical conductivity, CuNiSi system alloys are widely used as lead frames and connectors. In this work, CuNiSi alloys alloyed with Cr and Zr were rolled at liquid nitrogen temperature and subjected to various aging treatments. High-angle annular dark field scanning transmission electron microscopy (HAADF-STEM) analysis showed that in addition to forming Cr{sub 3}Si and Ni{sub 2}SiZr particles, elemental Cr and Zr distributed evenly in the matrix. Ni and Si segregated at the interface between the particles and matrix to form Ni{sub 2}Si precipitates. During the aging process, Cr alloying increased the hardness while slightly reducing the electrical conductivity of the alloy. This was ascribed to the refined precipitates and hindered precipitation kinetics. Zr alloying promoted both the precipitate growth and the precipitation kinetics of the CuNiSi alloys, while decreasing their hardness and enhancing their electrical conductivity. According to the results of the synchrotron X-ray diffraction (XRD) analysis, Cr alloying increased the dislocation density of CuNiSi alloys and suppressed the annihilation of dislocations during aging. This promoted strength through work hardening. Compared to CuNiSi alloys aged at 723 K for 2 h, the ultimate tensile strength of the alloys obtained after Cr alloying using a two-step rolling aging process was increased by 154 MPa and their electrical conductivity was increased by 4.8% International Annealed Copper Standard (IACS).

36 MATERIALS SCIENCE↗

Conductive nanolamellar Cu/martensite wire with high strength

Cu wires can be greatly strengthened without losing much conductivity if a continuous nanolamellar structure with Cu and a strong second constituent is achieved. Here, we report on a nanolamellar Cu/steel wire fabricated by repetitive hot-pressing, forging, rolling and subsequent wire drawing. Austenization and quenching in liquid nitrogen resulted in a Cu/martensite structure, exhibiting tensile strength of 1220 MPa. The electrical conductivity of the wire was measured to be about 60% International Annealed Copper Standard (IACS), which was comparable with Cu/Fe fabricated by alloying and casting. In situ tensile tests under high energy X-ray diffraction were utilized to explore the deformation behavior of the wire. It was discovered that the martensite carried about 60% of the load, accounting for the high strength.

36 MATERIALS SCIENCE↗

Characterization of a platform for the gas transport, collection, and identification of fission products in the high-intensity laser environment

Recent progress in the production of laser accelerated high flux proton beams opens new possibilities for the study of fission in unique environments. To this end, we are currently pursuing the development of a platform for the swift gas transport, collection, and identification of fission products. Fission is induced in targets fixed inside a sealed chamber through which a carrier gas flows, transporting fission products to a carbon filter for collection and online spectroscopy. This has been recently demonstrated using target normal sheath accelerated protons at the PHELIX laser facility. There were large discrepancies between measured rates and those expected based on established fission yields and measured beam parameters. These discrepancies prompted a large number of tests at the Idaho Accelerator Center (IAC), where fission in uranium is induced by bremsstrahlung photons generated by 21 MeV electrons from a linear electron accelerator. Here, the results are compared to a series of models that account for the slowing of energetic fission fragments in the carrier gas and the fluid dynamics of the gas flow that transports fission products to the collection filter. Characterization of the apparatus reveals a few mechanisms that together account for a portion of the previously observed discrepancies at the PHELIX laser facility. However, additional research is necessary before high-accuracy experiments can be performed with the apparatus. Work performed under the auspices of the U.S. Department of Energy by LLNL under contract DE-AC52-07NA27344.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

The chemical and physical origin of incineration ash reactivity in cementitious systems

Incorporating industrial byproducts and waste in concrete is the key to reducing landfill usage as well as lowering the environmental footprint of cement industry. An emerging industrial byproduct which can partly replace cement is the Municipal Solid Waste Incinerator Ash (MSWI ash: residue that is left after incineration of municipal solid waste in a Waste-to-Energy facility). These ashes are predominantly calcium-rich; however, they also contain additional elements whose speciation is not known. These elements can significantly alter the hydration characteristics of a cementitious system. Here, our results suggest these ashes can accelerate as well as retard cement hydration. Specifically, Pb, Br, S, Ca, and Cl appear to accelerate cement hydration, whereas Cu, Fe, Al, Ti, Si, K, Zn, and Sr appear to retard cement hydration. Changes in hydration characteristics can have a strong bearing on the physical characteristics of cementitious systems incorporating incineration ashes. Thus, to selectively screen ashes that synergistically enhance the physical characteristics, we introduce a novel “Incineration Ash Coefficient (IAC),” which shows a strong correlation with the compressive strength (R 2 =0.79) of cement-ash binary mixtures.

42 ENGINEERING↗

Diverse MarR bacterial regulators of auxin catabolism in the plant microbiome

Abstract Chemical signalling in the plant microbiome can have drastic effects on microbial community structure, and on host growth and development. Previously, we demonstrated that the auxin metabolic signal interference performed by the bacterial genus Variovorax via an auxin degradation locus was essential for maintaining stereotypic root development in an ecologically relevant bacterial synthetic community. Here, we dissect the Variovorax auxin degradation locus to define the genes iadDE as necessary and sufficient for indole-3-acetic acid (IAA) degradation and signal interference. We determine the crystal structures and binding properties of the operon’s MarR-family repressor with IAA and other auxins. Auxin degradation operons were identified across the bacterial tree of life and we define two distinct types on the basis of gene content and metabolic products: iac -like and iad -like. The structures of MarRs from representatives of each auxin degradation operon type establish that each has distinct IAA-binding pockets. Comparison of representative IAA-degrading strains from diverse bacterial genera colonizing Arabidopsis plants show that while all degrade IAA, only strains containing iad -like auxin-degrading operons interfere with auxin signalling in a complex synthetic community context. This suggests that iad -like operon-containing bacterial strains, including Variovorax species, play a key ecological role in modulating auxins in the plant microbiome.

59 BASIC BIOLOGICAL SCIENCES↗

The edges of galaxies: Tracing the limits of star formation

The outskirts of galaxies have been studied from multiple perspectives for the past few decades. However, it is still unknown if all galaxies have clear-cut edges similar to everyday objects. We address this question by developing physically motivated criteria to define the edges of galaxies. Based on the gas density threshold required for star formation, we define the edge of a galaxy as the outermost radial location associated with a significant drop in either past or ongoing in situ star formation. We explore ~1000 low-inclination galaxies with a wide range in morphology (dwarfs to ellipticals) and stellar mass (10 7 M ⊙ < M * < 10 12 M ⊙ ). The location of the edges of these galaxies (R edge ) were visually identified as the outermost cutoff or truncation in their radial profiles using deep multi-band optical imaging from the IAC Stripe82 Legacy Project. We find this characteristic feature at the following mean stellar mass density, which varies with galaxy morphology: 2.9 ± 0.10 M ⊙ pc -2 for ellipticals, 1.1 ± 0.04 M ⊙ pc -2 for spirals, and 0.6 ± 0.03 M ⊙ pc -2 for present-day star-forming dwarfs. Additionally, we find that R edge depends on its age (colour) where bluer galaxies have larger R edge at a fixed stellar mass. The resulting stellar mass–size plane using R edge as a physically motivated galaxy size measure has a very narrow intrinsic scatter (≲0.06 dex). These results highlight the importance of new deep imaging surveys to explore the growth of galaxies and trace the limits of star formation in their outskirts.

79 ASTRONOMY AND ASTROPHYSICS↗

The impact of environment on size: Galaxies are 50% smaller in the Fornax Cluster compared to the field

Size is a fundamental parameter for measuring the growth of galaxies and the role of the environment on their evolution. However, the conventional size definitions used for this purpose are often biased and miss the diffuse, outermost signatures of galaxy growth, including star formation and gas accretion. We address this issue by examining low surface brightness truncations or galaxy ‘edges’ as a physically motivated tracer of size based on star formation thresholds. Our total sample consists of ∼900 galaxies with stellar masses ranging from 10 5 M ⊙ < M ⋆ < 10 11 M ⊙ . This sample of nearby cluster, group satellite, and nearly isolated field galaxies was compiled using multi-band imaging from the Fornax Deep Survey, deep IAC Stripe 82, and Dark Energy Camera Legacy Surveys. We find that the edge radii scale as R edge ∝ M ⋆ 0.42 , with a very small intrinsic scatter (∼0.07 dex). The scatter is driven by the morphology and environment of galaxies. In both the cluster and field, early-type dwarfs are systematically smaller by approximately 20% compared to late-type dwarfs. However, galaxies in the Fornax cluster are the most impacted. At a fixed stellar mass, edges in the cluster can be found at about 50% smaller radii, and the average stellar surface density at the edges is a factor of two higher, ∼1 M ⊙ /pc 2 . Our findings support the rapid removal of loosely bound neutral hydrogen (H I ) in hot, crowded environments, which truncates galaxies outside-in earlier, preventing the formation of more extended sizes and lower density edges. Our results highlight the importance of deep imaging surveys to the study of low surface brightness imprints of the large-scale structure and environment on galaxy evolution.

Astronomy & Astrophysics↗

Real-Time Dosimetry for Radiobiology Experiments Using 25 MeV LINAC

The next generation of radiobiology research requires increasingly more complex radiation sources to address questions ranging from the effects of space-based radiation to the influence of dose rate on biological systems. The Idaho Accelerator Center (IAC) has developed a radiobiology research facility to address some of these questions. The irradiation challenge is to deliver stable and reproducible conditions of high dose rate with well-controlled beam uniformity, dose, and dose rate under controlled temperature. In this work, we used a 25 MeV modified medical grade linear accelerator (LINAC) to obtain a high and adjustable electron dose rate. To overcome electron beam drift we used a collimator that both assisted the LINAC operator to steer the beam and ensured that regardless of beam drift, only the fixed collimated beam would irradiate the specimens. In addition, we utilized a beam flattener to keep the beam variation as low as 3% at 2.5 cm from the beam's center, and 1% variation between the simultaneously irradiated sample tubes. We also demonstrated that a segmented Faraday 'cup'(FC) array provides a useful real-time beam scanning and monitoring system, and is promising for implementing real-time dosimetry and control.

43 PARTICLE ACCELERATORS↗

X-ray Fluorescence (XRF) Assay Using Laser Compton Scattered (LCS) X-rays

Laser Compton Scattered (LCS) X-rays are produced as a result of the interaction between accelerated electrons and a laser beam. The yield of LCS X-rays is dependent on the laser power, angle of collision between interacting particles, and the electron linear accelerator's (linac) electron beam energy and its current. One of our research goals at the Idaho Accelerator Center (IAC) focuses on applications such as detection and imaging of fissionable isotopes for nuclear non-proliferation, safeguards and homeland security. Quasi monochromatic LCS X-rays offer much better signal-to-noise ratios for such applications. The energy of LCS X-rays is tunable, that enable element-specific analysis. Two sharp 36.5 keV and 98.4 keV LCS peaks were observed in two separate experiments based on electron beams tuned at 32 MeV and 37 MeV, that were brought in collision with the (Power){sub peak} = 4 GW Nd.YAG laser operating at 532 nm and 266 nm wavelengths. The linac was operating at 60 Hz with an electron beam pulse length of about 50 ps and a peak current of about 7 A. We exploited X-ray fluorescence (XRF) techniques to identify elemental K{alpha}{sub 1}, K{alpha}{sub 2}, and K{beta}{sub 1} lines in a high-purity germanium (HPGe) detector, with a 0.5 mm thick Beryllium (Be) absorbing layer, emitted from tin (Sn), cadmium (Cd), silver (Ag), gold (Au), and lead (Pb) foils with thicknesses ranging from 25-500 {mu}m, following absorption of 36.1 keV and 98.4 keV LCS X-rays. These reference foils were used for the proof of principle, and some have atomic numbers near to that of relevant fission products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nanostructured Cu-Cr alloy with high strength and electrical conductivity

The influence of nanostructuring by high pressure torsion (HPT) on strength and electrical conductivity in the Cu-Cr alloy has been investigated. Microstructure of HPT samples was studied by transmission electron microscopy with special attention on precipitation of small chromium particles after various treatments. Effect of dynamic precipitation leading to enhancement of strength and electrical conductivity was observed. It is shown that nanostructuring leads to combination of high ultimate tensile strength of 790–840 MPa, enhanced electrical conductivity of 81%–85% IACS and thermal stability up to 500 °C. The contributions of grain refinement and precipitation to enhanced properties of nanostructured alloy are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Multi-plate interceptive electron beam energy diagnostic—Implementation and validation

A previous publication [P. D. McChesney, “Multi-plate interceptive electron beam energy diagnostic—Theoretical design,” AIP Adv. (submitted)] reported a new interceptive electron beam kinetic energy measurement technique based on the beam penetration depth within a stack of conductive plates and gave results on the theoretical design of such a device. This paper expands on this and gives further results on the actual implementation of the diagnostic. The device geometry and measurement electronics system are described in detail. A prototype version of the multi-plate diagnostic was fabricated and tested using an electron linear accelerator at the Idaho Accelerator Center (IAC). A high-precision magnetic spectrometer system was designed and built for the purpose of validating the multi-plate diagnostic’s energy measurement capabilities. It was found that the diagnostic provides electron beam energy estimates that are accurate to better than the 10% level.

43 PARTICLE ACCELERATORS↗

CEPHEID VARIABLE STARS IN THE PEGASUS DWARF IRREGULAR GALAXY: CONSTRAINTS ON THE STAR FORMATION HISTORY

Observations of the resolved stars obtained over a period of 11 years in the Local Group dwarf irregular galaxy Pegasus have been used to search for Cepheid variable stars. Images were obtained in 55 epochs in the V band and in 24 epochs in the I band. We have identified 26 Cepheids and have obtained their light curves and periods. On the basis of their position in the period-luminosity (PL) diagram, we have classified them as 18 fundamental modes and eight first overtone Cepheids. Two PL relations for Cepheids have been used to derive the distance, resulting in 1.07 {+-} 0.05 Mpc. We present the VARFINDER code which finds the variable stars and their predicted periods in a given synthetic color-magnitude diagram computed with IAC-star and we propose the use of the Cepheid population as a constraint of the star formation history of Pegasus.

79 ASTRONOMY AND ASTROPHYSICS↗

THE RECENT STAR FORMATION HISTORY OF NGC 5102

We present Hubble Space Telescope photometry of young stars in NGC 5102, a nearby gas-rich post-starburst S0 galaxy with a bright young stellar nucleus. We use the IAC-pop/MinnIAC algorithm to derive the recent star formation history in three fields in the bulge and disk of NGC 5102. In the disk fields, the recent star formation rate has declined monotonically and is now barely detectable, but a starburst is still in progress in the bulge and has added about 2% to the mass of the bulge over the last 200 Myr. Other studies of star formation in NGC 5102 indicate that about 20% of its stellar mass was added over the past Gyr. If this is correct, then much of the stellar mass of the bulge may have formed over this period. It seems likely that this star formation was fueled by the accretion of a gas-rich system with H I mass of about 2 x 10{sup 9} M {sub sun}, which has now been almost completely converted into stars. The large mass of recently formed stars and the blue colors of the bulge suggest that the current starburst, which is now fading, may have made a significant contribution to building the bulge of NGC 5102.

79 ASTRONOMY AND ASTROPHYSICS↗

THE ACS LCID PROJECT. III. THE STAR FORMATION HISTORY OF THE CETUS dSph GALAXY: A POST-REIONIZATION FOSSIL

We use deep HST/ACS observations to calculate the star formation history (SFH) of the Cetus dwarf spheroidal (dSph) galaxy. Our photometry reaches below the oldest main-sequence turnoffs, which allows us to estimate the age and duration of the main episode of star formation in Cetus. This is well approximated by a single episode that peaked roughly 12 {+-} 0.5 Gyr ago and lasted no longer than about 1.9 {+-} 0.5 Gyr (FWHM). Our solution also suggests that essentially no stars formed in Cetus during the past 8 Gyr. This makes Cetus' SFH comparable to that of the oldest Milky Way dSphs. Given the current isolation of Cetus in the outer fringes of the Local Group, the dominant old population implies that Cetus is a clear outlier in the morphology-Galactocentric distance relation that holds for the majority of the Milky Way dwarf satellites. Our results also show that Cetus continued forming stars until z{approx_equal} 1, long after the universe was reionized, and that there is no clear signature of the epoch of reionization in Cetus' SFH. We briefly discuss the implications of these results for dwarf galaxy evolution models. Finally, we present a comprehensive account of the data reduction and analysis strategy adopted for all galaxies targeted by the LCID (Local Cosmology from Isolated Dwarfs) project. We employ two different photometry codes (DAOPHOT/ALLFRAME and DOLPHOT), three different SFH reconstruction codes (IAC-pop/MinnIAC, MATCH, and COLE), and two stellar evolution libraries (BaSTI and Padova/Girardi), allowing for a detailed assessment of the modeling and observational uncertainties.

79 ASTRONOMY AND ASTROPHYSICS↗