SEARCH · Engineering Papers

Results for “I/O performance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

All sources NASA NTRS DOE OSTI

NASA NTRS2012

An Application-Based Performance Evaluation of NASAs Nebula Cloud Computing Platform

The high performance computing (HPC) community has shown tremendous interest in exploring cloud computing as it promises high potential. In this paper, we examine the feasibility, performance, and scalability of production quality scientific and engineering applications of interest to NASA on NASA's cloud computing platform, called Nebula, hosted at Ames Research Center. This work represents the comprehensive evaluation of Nebula using NUTTCP, HPCC, NPB, I/O, and MPI function benchmarks as well as four applications representative of the NASA HPC workload. Specifically, we compare Nebula performance on some of these benchmarks and applications to that of NASA s Pleiades supercomputer, a traditional HPC system. We also investigate the impact of virtIO and jumbo frames on interconnect performance. Overall results indicate that on Nebula (i) virtIO and jumbo frames improve network bandwidth by a factor of 5x, (ii) there is a significant virtualization layer overhead of about 10% to 25%, (iii) write performance is lower by a factor of 25x, (iv) latency for short MPI messages is very high, and (v) overall performance is 15% to 48% lower than that on Pleiades for NASA HPC applications. We also comment on the usability of the cloud platform.

Saini, Subhash↗

NASA NTRS1993

Performance measurements and operational characteristics of the Storage Tek ACS 4400 tape library with the Cray Y-MP EL

With over 5000 units sold, the Storage Tek Automated Cartridge System (ACS) 4400 tape library is currently the most popular large automated tape library. Based on 3480/90 tape technology, the library is used as the migration device ('nearline' storage) in high-performance mass storage systems. In its maximum configuration, one ACS 4400 tape library houses sixteen 3480/3490 tape drives and is capable of holding approximately 6000 cartridge tapes. The maximum storage capacity of one library using 3480 tapes is 1.2 TB and the advertised aggregate I/O rate is about 24 MB/s. This paper reports on an extensive set of tests designed to accurately assess the performance capabilities and operational characteristics of one STK ACS 4400 tape library holding approximately 5200 cartridge tapes and configured with eight 3480 tape drives. A Cray Y-MP EL2-256 was configured as its host machine. More than 40,000 tape jobs were run in a variety of conditions to gather data in the areas of channel speed characteristics, robotics motion, time taped mounts, and timed tape reads and writes.

Hull, Gary↗

NASA NTRS2010

Flexible Peripheral Component Interconnect Input/Output Card

The Flexible Peripheral Component Interconnect (PCI) Input/Output (I/O) Card is an innovative circuit board that provides functionality to interface between a variety of devices. It supports user-defined interrupts for interface synchronization, tracks system faults and failures, and includes checksum and parity evaluation of interface data. The card supports up to 16 channels of high-speed, half-duplex, low-voltage digital signaling (LVDS) serial data, and can interface combinations of serial and parallel devices. Placement of a processor within the field programmable gate array (FPGA) controls an embedded application with links to host memory over its PCI bus. The FPGA also provides protocol stacking and quick digital signal processor (DSP) functions to improve host performance. Hardware timers, counters, state machines, and other glue logic support interface communications. The Flexible PCI I/O Card provides an interface for a variety of dissimilar computer systems, featuring direct memory access functionality. The card has the following attributes: 8/16/32-bit, 33-MHz PCI r2.2 compliance, Configurable for universal 3.3V/5V interface slots, PCI interface based on PLX Technology's PCI9056 ASIC, General-use 512K 16 SDRAM memory, General-use 1M 16 Flash memory, FPGA with 3K to 56K logical cells with embedded 27K to 198K bits RAM, I/O interface: 32-channel LVDS differential transceivers configured in eight, 4-bit banks; signaling rates to 200 MHz per channel, Common SCSI-3, 68-pin interface connector.

Bigelow, Kirk K.↗

NASA NTRS1992

A high performance, ad-hoc, fuzzy query processing system for relational databases

Database queries involving imprecise or fuzzy predicates are currently an evolving area of academic and industrial research. Such queries place severe stress on the indexing and I/O subsystems of conventional database environments since they involve the search of large numbers of records. The Datacycle architecture and research prototype is a database environment that uses filtering technology to perform an efficient, exhaustive search of an entire database. It has recently been modified to include fuzzy predicates in its query processing. The approach obviates the need for complex index structures, provides unlimited query throughput, permits the use of ad-hoc fuzzy membership functions, and provides a deterministic response time largely independent of query complexity and load. This paper describes the Datacycle prototype implementation of fuzzy queries and some recent performance results.

Mansfield, William H., Jr.↗

NASA NTRS1987

Space lab system analysis

An analytical analysis of the HOSC Generic Peripheral processing system was conducted. The results are summarized and they indicate that the maximum delay in performing screen change requests should be less than 2.5 sec., occurring for a slow VAX host to video screen I/O rate of 50 KBps. This delay is due to the average I/O rate from the video terminals to their host computer. Software structure of the main computers and the host computers will have greater impact on screen change or refresh response times. The HOSC data system model was updated by a newly coded PASCAL based simulation program which was installed on the HOSC VAX system. This model is described and documented. Suggestions are offered to fine tune the performance of the ETERNET interconnection network. Suggestions for using the Nutcracker by Excelan to trace itinerate packets which appear on the network from time to time were offered in discussions with the HOSC personnel. Several visits to the HOSC facility were to install and demonstrate the simulation model.

Ingels, F. M.↗

NASA NTRS1990

A highly reliable, autonomous data communication subsystem for an advanced information processing system

The need to meet the stringent performance and reliability requirements of advanced avionics systems has frequently led to implementations which are tailored to a specific application and are therefore difficult to modify or extend. Furthermore, many integrated flight critical systems are input/output intensive. By using a design methodology which customizes the input/output mechanism for each new application, the cost of implementing new systems becomes prohibitively expensive. One solution to this dilemma is to design computer systems and input/output subsystems which are general purpose, but which can be easily configured to support the needs of a specific application. The Advanced Information Processing System (AIPS), currently under development has these characteristics. The design and implementation of the prototype I/O communication system for AIPS is described. AIPS addresses reliability issues related to data communications by the use of reconfigurable I/O networks. When a fault or damage event occurs, communication is restored to functioning parts of the network and the failed or damage components are isolated. Performance issues are addressed by using a parallelized computer architecture which decouples Input/Output (I/O) redundancy management and I/O processing from the computational stream of an application. The autonomous nature of the system derives from the highly automated and independent manner in which I/O transactions are conducted for the application as well as from the fact that the hardware redundancy management is entirely transparent to the application.

Nagle, Gail↗

NASA NTRS1995

TIA Software User's Manual

This user's manual describes the installation and operation of TIA, the Thermal-Imaging acquisition and processing Application, developed by the Nondestructive Evaluation Sciences Branch at NASA Langley Research Center, Hampton, Virginia. TIA is a user friendly graphical interface application for the Macintosh 2 and higher series computers. The software has been developed to interface with the Perceptics/Westinghouse Pixelpipe(TM) and PixelStore(TM) NuBus cards and the GW Instruments MacADIOS(TM) input-output (I/O) card for the Macintosh for imaging thermal data. The software is also capable of performing generic image-processing functions.

Cramer, K. Elliott↗

NASA NTRS1992

NHT-1 I/O Benchmarks

The NHT-1 benchmarks am a set of three scalable I/0 benchmarks suitable for evaluating the I/0 subsystems of high performance distributed memory computer systems. The benchmarks test application I/0, maximum sustained disk I/0, and maximum sustained network I/0. Sample codes are available which implement the benchmarks.

Carter, Russell↗

NASA NTRS1988

A multiprocessing architecture for real-time monitoring

A multitasking architecture for performing real-time monitoring and analysis using knowledge-based problem solving techniques is described. To handle asynchronous inputs and perform in real time, the system consists of three or more distributed processes which run concurrently and communicate via a message passing scheme. The Data Management Process acquires, compresses, and routes the incoming sensor data to other processes. The Inference Process consists of a high performance inference engine that performs a real-time analysis on the state and health of the physical system. The I/O Process receives sensor data from the Data Management Process and status messages and recommendations from the Inference Process, updates its graphical displays in real time, and acts as the interface to the console operator. The distributed architecture has been interfaced to an actual spacecraft (NASA's Hubble Space Telescope) and is able to process the incoming telemetry in real-time (i.e., several hundred data changes per second). The system is being used in two locations for different purposes: (1) in Sunnyville, California at the Space Telescope Test Control Center it is used in the preflight testing of the vehicle; and (2) in Greenbelt, Maryland at NASA/Goddard it is being used on an experimental basis in flight operations for health and safety monitoring.

Schmidt, James L.↗

NASA NTRS1987

Real-time analysis of telemetry data

This paper descibes a knowledge-based system for performing real-time monitoring and analysis of telemetry data from the NASA Hubble Space Telescope (HST). In order to handle asynchronous inputs and perform in real time the system consists of three or more separate processes, which run concurrently and communicate via a message passing scheme. The data management process gathers, compresses, and scales the incoming telemetry data befoe sending it to the other tasks. The inferencing process uses the incoming data to perform a real-time analysis of the state and health of the Space Telescope. The I/O process receives telemetry monitors from the data management process, updates its graphical displays in real time, and acts as the interface to the console operator. The three processes may run on the same or different computers. This system is currently under development and is being used to monitor testcases produced by the Bass Telemetry System in the Hardware/Software Integration Facility at Lockheed Missile and Space Co. in Sunnyvale, California.

Kao, Simon A.↗

NASA NTRS1991

Rewriteable optical disk recorder development

A NASA program to develop a high performance (high rate, high capability) rewriteable optical disk recorder for spaceflight applications is presented. An expandable, adaptable system concept is proposed based on disk Drive modules and a modular Controller. Drive performance goals are 10 gigabyte capacity are up to 1.8 gigabits per second rate with concurrent I/O, synchronous data transfer, and 2 to 5 years operating life in orbit. Technology developments, design concepts, current status, and future plans are presented.

Shull, Thomas A.↗

NASA NTRS1993

Improvement in HPC performance through HIPPI RAID storage

In 1986, RAID (redundant array of inexpensive (or independent) disks) technology was introduced as a viable solution to the I/O bottleneck. A number of different RAID levels were defined in 1987 by the Computer Science Division (EECS) University of California, Berkeley, each with specific advantages and disadvantages. With multiple RAID options available, taking advantage of RAID technology required matching particular RAID levels with specific applications. It was not possible to use one RAID device to address all applications. Maximum Strategy's Gen 4 Storage Server addresses this issue with a new capability called programmable RAID level partitioning. This capability enables users to have multiple RAID levels coexist on the same disks, thereby providing the versatility necessary for multiple concurrent applications.

Homan, Blake↗

NASA NTRS1992

Computer optimization techniques for NASA Langley's CSI evolutionary model's real-time control system

The evolution and optimization of a real-time digital control system is presented. The control system is part of a testbed used to perform focused technology research on the interactions of spacecraft platform and instrument controllers with the flexible-body dynamics of the platform and platform appendages. The control system consists of Computer Automated Measurement and Control (CAMAC) standard data acquisition equipment interfaced to a workstation computer. The goal of this work is to optimize the control system's performance to support controls research using controllers with up to 50 states and frame rates above 200 Hz. The original system could support a 16-state controller operating at a rate of 150 Hz. By using simple yet effective software improvements, Input/Output (I/O) latencies and contention problems are reduced or eliminated in the control system. The final configuration can support a 16-state controller operating at 475 Hz. Effectively the control system's performance was increased by a factor of 3.

Elliott, Kenny B.↗

NASA NTRS1992

Computer optimization techniques for NASA Langley's CSI evolutionary model's real-time control system

Elliott, Kenny B.↗

NASA NTRS1997

Visualization of Unsteady Computational Fluid Dynamics

The current compute environment that most researchers are using for the calculation of 3D unsteady Computational Fluid Dynamic (CFD) results is a super-computer class machine. The Massively Parallel Processors (MPP's) such as the 160 node IBM SP2 at NAS and clusters of workstations acting as a single MPP (like NAS's SGI Power-Challenge array and the J90 cluster) provide the required computation bandwidth for CFD calculations of transient problems. If we follow the traditional computational analysis steps for CFD (and we wish to construct an interactive visualizer) we need to be aware of the following: (1) Disk space requirements. A single snap-shot must contain at least the values (primitive variables) stored at the appropriate locations within the mesh. For most simple 3D Euler solvers that means 5 floating point words. Navier-Stokes solutions with turbulence models may contain 7 state-variables. (2) Disk speed vs. Computational speeds. The time required to read the complete solution of a saved time frame from disk is now longer than the compute time for a set number of iterations from an explicit solver. Depending, on the hardware and solver an iteration of an implicit code may also take less time than reading the solution from disk. If one examines the performance improvements in the last decade or two, it is easy to see that depending on disk performance (vs. CPU improvement) may not be the best method for enhancing interactivity. (3) Cluster and Parallel Machine I/O problems. Disk access time is much worse within current parallel machines and cluster of workstations that are acting in concert to solve a single problem. In this case we are not trying to read the volume of data, but are running the solver and the solver outputs the solution. These traditional network interfaces must be used for the file system. (4) Numerics of particle traces. Most visualization tools can work upon a single snap shot of the data but some visualization tools for transient problems require dealing with time.

Haimes, Robert↗

NASA NTRS2021

The CHIMAERA System for Retrievals of Cloud Top, Optical and Microphysical Properties from Imaging Sensors

Continuity and consistency of geophysical retrieval products obtained from different Earth-observing spaceborne or airborne atmospheric multispectral imagers can be challenging due to inherent differences in the instruments and/or the use of different retrieval algorithms. The Cross-platform HIgh resolution Multi-instrument AtmosphEric Retrieval Algorithms (CHIMAERA) system addresses the latter aspect of the inter-sensor continuity problem for cloud property retrievals by removing retrieval methodology and implementation as a source of inconsistency when applied to instruments that share common measurement capabilities. Transferring an existing retrieval algorithm to a new sensor oftentimes is a nontrivial task, as it is common for an algorithm code to be tightly coupled to the sensor for which it was developed. By creating a clear division between the science algorithm and the instrument I/O codes, CHIMAERA allows easy migration of science algorithms to different sensors. CHIMAERA is built from C and FORTRAN source code, and can operate in a variety of environments ranging from a personal laptop to a high-performance computing environment for near real-time satellite data production. It is highly adaptable, low-maintenance and allows for easy expansion such that adding new instruments into the system requires only instrument-specific I/O and provision of any external lookup tables specific to the instrument's spectral characteristics. CHIMAERA currently supports 14 spaceborne and airborne atmospheric imagers from a single code base, and has been in use since 2007. In this paper we describe the engineering aspects of CHIMAERA and briefly discuss a few examples from its many current applications.

Galina (Gala) Wind↗

NASA NTRS1972

A workload model and measures for computer performance evaluation

A generalized workload definition is presented which constructs measurable workloads of unit size from workload elements, called elementary processes. An elementary process makes almost exclusive use of one of the processors, CPU, I/O processor, etc., and is measured by the cost of its execution. Various kinds of user programs can be simulated by quantitative composition of elementary processes into a type. The character of the type is defined by the weights of its elementary processes and its structure by the amount and sequence of transitions between its elementary processes. A set of types is batched to a mix. Mixes of identical cost are considered as equivalent amounts of workload. These formalized descriptions of workloads allow investigators to compare the results of different studies quantitatively. Since workloads of different composition are assigned a unit of cost, these descriptions enable determination of cost effectiveness of different workloads on a machine. Subsequently performance parameters such as throughput rate, gain factor, internal and external delay factors are defined and used to demonstrate the effects of various workload attributes on the performance of a selected large scale computer system.

Kerner, H.↗

NASA NTRSDate not supplied

NASA and Blue Origin’s Flight Assessment of Precision Landing Algorithms Computing Performance

NASA’s Safe and Precise Landing - Integrated Capabilities Evolution (SPLICE) project continues NASA’s work in the development and testing of technologies for Precision Landing and Hazard Avoidance (PL&HA). This paper presents results characterizing how SPLICE flight software utilizes the shared computing resources of the Descent Landing Computer (DLC), one of the PL&HA technologies under development. The SPLICE technologies are being tested as an integrated payload on Blue Origin’s New Shepard suborbital vehicle. The results presented in this paper are measured by applications running in and with the flight software both in flight, and in a high-fidelity Hardware-in-the-Loop (HWIL) simulation environment. Linux utilities to measure performance are also executed from the command line in the HWIL configuration. Performance measurements of the SPLICE workloads executing on the DLC provide insight on how efficiently the software is utilizing the DLC resources. Examples of how these measurements have guided improvements in the flight code are presented. In addition, the DLC uses a commercial processor as a surrogate for NASA’s High-Performance Spaceflight Computing (HPSC) processor. This work provides insight on how an HPSC system may perform delivering PL&HA capabilities on a future mission. The measurements also can be used to infer architectural requirements for PL&HA capabilities, informing the HPSC project and other flight computer development efforts. Examples of the measurements collected include processor utilization, I/O bandwidth, cache and branch misses, and application profiles.

Precision Landing↗