Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Hydrophilicity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS2009

Use of Atomic Oxygen for Increased Water Contact Angles of Various Polymers for Biomedical Applications

The purpose of this study was to determine the effect of atomic oxygen (AO) exposure on the hydrophilicity of nine different polymers for biomedical applications. Atomic oxygen treatment can alter the chemistry and morphology of polymer surfaces, which may increase the adhesion and spreading of cells on Petri dishes and enhance implant growth. Therefore, nine different polymers were exposed to atomic oxygen and water-contact angle, or hydrophilicity, was measured after exposure. To determine whether hydrophilicity remains static after initial atomic oxygen exposure, or changes with higher fluence exposures, the contact angles between the polymer and water droplet placed on the polymer s surface were measured versus AO fluence. The polymers were exposed to atomic oxygen in a 100-W, 13.56-MHz radio frequency (RF) plasma asher, and the treatment was found to significantly alter the hydrophilicity of non-fluorinated polymers. Pristine samples were compared with samples that had been exposed to AO at various fluence levels. Minimum and maximum fluences for the ashing trials were set based on the effective AO erosion of a Kapton witness coupon in the asher. The time intervals for ashing were determined by finding the logarithmic values of the minimum and maximum fluences. The difference of these two values was divided by the desired number of intervals (ideally 10). The initial desired fluence was then multiplied by this result (2.37), as was each subsequent desired fluence. The flux in the asher was determined to be approximately 3.0 x 10(exp 15) atoms/sq cm/sec, and each polymer was exposed to a maximum fluence of 5.16 x 10(exp 20) atoms/sq cm.

deGroh, Kim↗
DOE OSTI2022

Effects of Surface Hydrophobicity on Catalytic Transfer Hydrogenation of Styrene with Formic Acid in a Biphasic Mixture

Transfer hydrogenation (TH) of unsaturated hydrocarbons with formic acid (FA) is an attractive processing pathway for the reduction of lignocellulosic pyrolysis oils. The low solubility of hydrophobic bio-oil species in water and FA in oil necessitates the use of a biphasic system as the reaction environment. Here, we report the effects of Pd/silica catalyst surface wettability on the TH reaction rate. Modification of the surface with short chain (C1–C4) alkyl silanes resulted in an increase in the reaction rate as compared to the unmodified catalyst. In contrast, modification of the surface with sulfonate (hydrophilic) and C18 alkyl silanes (hydrophobic) resulted in a decrease in the reaction rate as compared to the unmodified catalyst. Here, the results are discussed in terms of the catalyst interfacial activity and relative affinity of the reagents to the Pd active sites. An observed change in the apparent reaction order in styrene for a hydrophilic catalyst suggests that changing catalyst surface wettability from hydrophilic to hydrophobic resulted in a switch from a transport-limited to a kinetic-limited reaction regime.

09 BIOMASS FUELS↗
DOE OSTI2021

Durable and Highly Selective Ion Transport of a Sulfonated Diels Alder Poly(phenylene) for Vanadium Redox Flow Batteries

In order to improve the durability and ion selectivity of a hydrocarbon membrane for vanadium redox flow batteries (VRFBs) a polymer was rationally designed with an external hydrophobic shell and internal hydrophilic core. The polymer was designed to prevent hydrophilic polymer chain aggregation by functionalizing the external polymer shell with hydrophobic side chains and attaching acid moieties onto the polymer backbone. The hydrophobic shell is the result of pentafluorobenzoyl group functionalization on the pendent aryl rings in a Diels Alder poly(phenylene) backbone. The internal polymer chain contains sulfonic acid moieties to impart hydrophilic character. The physical and electrochemical characteristics of the membrane were systematically studied and compared with widely used Nafion-212. The synthesized membranes were found to be superior to Nafion-212 not only in terms of lower vanadium ion permeability (4.25 x 10 -8 vs. Nafion-212: 6.0 x 10 -6 cm 2 min -1 ) but also in higher VRFB performance (EE = 89% and vs. Nafion-212: 85.5% at 40 mA/cm 2 ). The membrane also showed over three times higher capacity retention than Nafion-212 (0.075 % vs. 0.25 % capacity loss per cycle respectively) and excellent ex situ and in situ chemical stability.

25 ENERGY STORAGE↗
DOE OSTI2024

Multistage Condensation Pathway Minimizes Hysteresis in Water Harvesting with Large-Pore Metal–Organic Frameworks

Metal-organic frameworks (MOFs) have emerged as promising materials for atmospheric water harvesting (AWH). Large-pore MOFs provide high water capacity, but their significant hysteresis between sorption and desorption makes them unsuitable for AWH. Co2Cl2(BTDD) is a noteworthy exception. This MOF has large, 2.2 nm diameter one-dimensional pores, and combines both record-high water capacity and minimal hysteresis, making it an excellent material for water capture in arid areas. Sorption reversibility in Co2Cl2(BTDD) has been attributed to continuous water uptake. However, the sharp adsorption/desorption in the isotherms supports a discontinuous first-order transition. Here we use molecular simulations to compute the water adsorption and desorption pathways and isotherms in a Co2Cl2(BTDD) model, to elucidate how does this MOF achieve reversibility despite its large pore size. The simulations reveal a multi-stage mechanism of discontinuous water uptake facilitated by spatial segregation of rows of hydrophilic metal sites bridged by ~1 nm hydrophobic ligands. The multi-stage mechanism breaks the barrier of capillary condensation into smaller, easier to surmount ones, resulting in a facile process despite the sharp density discontinuity between confined liquid and vapor. Our results explain why exchanging Co2+ for Ni2+ or Clfor F- in the MOF have minimal impact on the condensation and desorption pressures. On the other hand, we predict that a decrease in hydrophilicity of the MOF vertices would strongly increase the hysteresis. We expect that the relationships between spatial distribution of hydrophilic sites and hysteresis unraveled in this study assist the design of water harvesting materials with maximal capacity and reversibility.

Zaragoza, Alberto↗
DOE OSTI2025

Ether Cleavage Decreases the Ion Exchange Capacity of Anion Exchange Membranes

Anion exchange membranes (AEMs) are integral to fuel cells and water electrolysis systems but suffer from poor durability under alkaline conditions. Ether cleavage is an important failure pathway of poly(arylene ether)-based AEMs that compromises both mechanical stability and ion transport. While this degradation pathway is often studied in terms of polymer fragmentation, the role of newly formed hydrophilic groups has been largely overlooked. Here, we show that polymer scission leads to reduced mechanical rigidity, while the introduction of hydrophilic groups partially mitigates this loss. Under alkaline conditions, phenoxide groups formed during ether cleavage neutralize the polymer cations, leading to a previously unreported loss of ion exchange capacity (IEC). This IEC loss mechanism exacerbates the reduction in ionic conductivity, emphasizing the severity of ether cleavage as a degradation pathway. Recognizing that ether cleavage introduces significant chemical changes beyond polymer fragmentation provides critical insights into its interplay with other degradation mechanisms, such as the direct reduction of cationic sites by E2 and S N 2, and provides molecular-level interpretations for the concurrent effects of polymer scission and increased hydrophilicity on membrane performance.

crystal cleavage↗
DOE OSTI2026

Processing-Dependent Structure and Poroelasticity of Nafion in Liquid Water

Ionomers act as the solid polymer electrolyte membrane in many modern electrochemical devices, yet the role of their nanostructure in modulating the poroelastic response remains poorly understood, especially in liquid water, where few techniques can measure simultaneous transport-mechanical properties. Poroelastic Relaxation Indentation (PRI) is uniquely suited for measuring time-dependent transport-mechanical properties of porous solids, specifically hydraulic diffusivity, elastic modulus, Poisson’s ratio, and intrinsic permeability, for porous solids. While ionomers such as Nafion are not porous in the typical sense, Nafion has a nanophase-segregated structure that, when fully swollen in liquid water, behaves as a poroelastic solid with a coupled mechanical-transport response. Using a poroelastic framework, we investigate how casting and pretreatment of Nafion membranes alter their poroelastic response in liquid environments. We characterize both extruded and dispersion-cast Nafion membranes pretreated in water at 25 or 100 °C and relate the mechanical-transport properties to the ionomer structure via hydrophilic and intercrystalline domain spacing measured using Small-Angle X-ray Scattering (SAXS). At 25 °C, dispersion-cast membranes exhibit distinctly lower hydraulic diffusivity and intrinsic permeability than extruded membranes but with comparable mechanical properties. Pretreatment at 100 °C increases hydrophilic domain spacing, improving transport but at the expense of mechanical stiffness. Dispersion-cast membranes respond more strongly to pretreatment than extruded membranes. Using the Carman-Kozeny pore network model and the hydrophilic domain-spacing, we estimate the pore radius and tortuosity to show how pretreatment reduces structure-related tortuosity differences between dispersion-cast and extruded membranes. Here, in this work, we show that nanophase-segregated materials such as Nafion can be rigorously characterized using poroelasticity, resulting in physically meaningful transport-mechanical properties. Coupling PRI with SAXS provides insights into the nanostructural features that govern the coupled mechanical-transport response. By establishing PRI for a nanophase-segregated material, this approach opens avenues for this technique’s application in other hydrated polymeric materials not typically considered to be poroelastic.

Shen, Margaret [University of California, Berkeley↗
DOE OSTI2026

Hydrophobic Metal–Organic Frameworks Enable Superior High-Pressure Ammonia Storage through Geometric Design

Hydrophobic metal–organic frameworks (MOFs) are typically overlooked for ammonia storage due to weak host–guest interactions. Here, we demonstrate that four structurally analogous aluminum-based MOFs exhibit a counterintuitive behavior whereby framework geometry, rather than ligand hydrophilicity, determines high-pressure NH 3 adsorption performance. The hydrophobic CAU-23 achieved an exceptional capacity matching hydrophilic analogs despite its poor low-pressure uptake. This pressure-dependent enhancement stems from the unique 4-cis-4-trans geometry of CAU-23 compared to the purely cis arrangement of MIL-160 and KMF-1 and the alternating cis-trans configuration of MOF-303. Critically, CAU-23 retained 95% capacity over three high-pressure cycles, whereas hydrophilic MOFs suffered 39–46% irreversible losses due to strong NH 3 -framework interactions that compromise structural integrity. Grand canonical Monte Carlo simulations reveal that high pressure enables NH 3 clustering through intermolecular hydrogen bonding, bypassing the need for strong host–guest interactions. High-pressure powder X-ray diffraction measurements confirm the exceptional mechanical resilience of CAU-23, showing complete structural recovery upon decompression despite exhibiting the highest pressure sensitivity among the studied MOFs. An extended analog, HE-CAU-23, validates this design principle with further enhanced capacity. Furthermore, these findings reveal a paradigm shift toward hydrophobic MOFs with optimized geometry for high-performance and regenerable gas storage applications.

MOFs↗
DOE OSTI2026

Interfacial Inversion of Stealth Surfactants

Amphiphilic macromolecular surfactants segregate to liquid–liquid interfaces, thereby reducing the interfacial tension and free energy. Here, we investigated “stealth surfactants” in the form of core–shell bottlebrush polymers comprised of pH-responsive diblock copolymer side chains forming a hydrophilic core and a hydrophobic shell, enabling solubility in oil. At liquid–liquid interfaces, these polymers undergo a structural “inversion”, with hydrophilic blocks segregating into the aqueous phase and hydrophobic blocks residing in the oil phase. The reconfiguration kinetics and surfactant properties are influenced by multiple factors, including the molecular weights of the backbone and side chain components, the hydrophilic-to-hydrophobic balance of the side chains, and the pH of the aqueous phase. An observed nonmonotonic dependence of interfacial tension with time is attributed to a progressive structural inversion, where the projected area of the macromolecule onto the interface decreases. To validate this inversion hypothesis, interfacial properties were characterized by sum-frequency generation vibrational spectroscopy, which revealed configurational changes of the core–shell bottlebrush polymers at the fluid interface and revealed a pH-dependent interfacial coverage. Coarse-grained molecular dynamics simulations supported these experimental findings, showing that the pH-responsive core and hydrophobic shell assume a time-averaged configuration with orientations parallel and perpendicular to the plane of the interface, respectively. These findings open routes to design multistimuli-responsive polymeric surfactants and compatibilizers, expanding their potential applications in advanced interfacial systems.

Stealth surfactants↗
DOE OSTI2021

Guiding light via slippery liquid-infused porous surfaces

Slippery liquid-infused porous surfaces (SLIPSs) have been explored for many applications, taking advantage of their highly non-wetting property. In this work, we explore the SLIPS as a cladding material for waveguiding. SLIPSs are prepared by infusing perfluoropolyether oil to hydrophobized nanoporous surfaces of silicon. Power loss and transmission efficiency of an HeNe laser (1.82 mW and 632.8 nm) with varying incident angles were measured through microchannels consisting of the SLIPSs as cladding layers (noil = 1.30) and water (nwater = 1.33) as a core, compared to other cladding types including a planar silicon surface and the nanoporous surfaces in hydrophilic (Wenzel state) and hydrophobic (Cassie–Baxter state) conditions with no oil infused. Agreeing with Snell's law, a total internal reflection occurs at the incident angle as high as 14° for the SLIPSs. The waveguide loss at 14° is only 1.8 dB/cm for the SLIPSs, while those for planar silicon, hydrophilic nanoporous, and hydrophobic nanoporous surfaces are 5.9, 7.4, and 4.9 dB/cm, respectively. The power transmission efficiency of the SLIPSs is independent of the porosity because the surfaces are fully covered with the oil layer, whereas those of hydrophilic and hydrophobic nanoporous surfaces, whose pores are filled with water and air, respectively, depend on the porosity. The significantly lower power loss and the insensitivity to the surface porosity are advantages of the SLIPSs over the other surfaces and can benefit in waveguiding applications such as optofluidics.

Asawa, Kaustubh (ORCID:0000000197142555)↗
DOE OSTI2023

Interplay between Shelf Life and Printability of Silica-Filled Suspensions

Although fumed silica/siloxane suspensions are commonly employed in additive manufacturing technology, the interplay between shelf life, storage conditions, and printability has yet to be explored. In this work, direct ink writing (DIW) was used to print unique three-dimensional structures that required suspensions to retain shape and form while being printed onto a substrate. Suspensions containing varying concentrations of hydrophobic and hydrophilic silica were formulated and evaluated over a time span of thirty days. Storage conditions included low (8%) and high (50%) relative humidity and temperatures ranging from 4 °C to 25 °C. The shelf life of the suspensions was examined by comparing the print quality of pristine and aged samples via rheology, optical microscopy, and mechanical testing. Results showed a significant decrease in printability over time for suspensions containing hydrophilic fumed silica, whereas the printability of suspensions containing hydrophobic fumed silica remained largely unchanged after storage. The findings in this work established the following recommendations for extending the shelf life and printability of suspensions commonly used in DIW technology: (1) higher fumed silica concentrations, (2) low humidity and low temperature storage environments, and (3) the use of hydrophobic fumed silica instead of hydrophilic fumed silica.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Self-Cleaning Highly Porous TiO 2 Coating Designed by Swelling-Assisted Sequential Infiltration Synthesis (SIS) of a Block Copolymer Template

Photocatalytic self-cleaning coatings with a high surface area are important for a wide range of applications, including optical coatings, solar panels, mirrors, etc. Here, we designed a highly porous TiO 2 coating with photoinduced self-cleaning characteristics and very high hydrophilicity. This was achieved using the swelling-assisted sequential infiltration synthesis (SIS) of a block copolymer (BCP) template, which was followed by polymer removal via oxidative thermal annealing. The quartz crystal microbalance (QCM) was employed to optimize the infiltration process by estimating the mass of material infiltrated into the polymer template as a function of the number of SIS cycles. This adopted swelling-assisted SIS approach resulted in a smooth uniform TiO 2 film with an interconnected network of pores. The synthesized film exhibited good crystallinity in the anatase phase. The resulting nanoporous TiO 2 coatings were tested for their functional characteristics. Exposure to UV irradiation for 1 h induced an improvement in the hydrophilicity of coatings with wetting angle reducing to unmeasurable values upon contact with water droplets. Furthermore, their self-cleaning characteristics were tested by measuring the photocatalytic degradation of methylene blue (MB). The synthesized porous TiO 2 nanostructures displayed promising photocatalytic activity, demonstrating the degradation of approximately 92% of MB after 180 min under ultraviolet (UV) light irradiation. Thus, the level of performance was comparable to the photoactivity of commercial anatase TiO 2 nanoparticles of the same quantity. Our results highlight a new robust approach for designing hydrophilic self-cleaning coatings with controlled porosity and composition.

36 MATERIALS SCIENCE↗
NASA NTRS1976

Preparation and characterization of methacrylate hydrogels for zeta potential control

A technique based on the measurement of streaming potentials has been developed to evaluate the effects of hydrophilic coatings on electroosmotic flow. The apparatus and procedure are described as well as some results concerning the electrokinetic potential of glass capillaries as a function of ionic strength, pH, and temperature. The effect that turbulence and entrance flow conditions have on accurate streaming potential measurements is discussed. Various silane adhesion promoters exhibited only a slight decrease in streaming potential. A coating utilizing a glycidoxy silane base upon which methylcellulose is applied affords a six-fold decrease over uncoated tubes. Hydrophilic methacrylate gels show similar streaming potential behavior, independent of the water content of the gel. By introduction of positive or negative groups into the hydrophilic methacrylate gels, a range of streaming potential values are obtained having absolute positive or negative signs.

Gregonis, D. E.↗
NASA NTRS2000

Microencapsulation and Electrostatic Processing Method

Methods are provided for forming spherical multilamellar microcapsules having alternating hydrophilic and hydrophobic liquid layers, surrounded by flexible, semi-permeable hydrophobic or hydrophilic outer membranes which can be tailored specifically to control the diffusion rate. The methods of the invention rely on low shear mixing and liquid-liquid diffusion process and are particularly well suited for forming microcapsules containing both hydrophilic and hydrophobic drugs. These methods can be carried out in the absence of gravity and do not rely on density-driven phase separation, mechanical mixing or solvent evaporation phases. The methods include the process of forming, washing and filtering microcapsules. In addition, the methods contemplate coating microcapsules with ancillary coatings using an electrostatic field and free fluid electrophoresis of the microcapsules. The microcapsules produced by such methods are particularly useful in the delivery of pharmaceutical compositions.

Morrison, Dennis R.↗
NASA NTRS2003

Membrane-Based Gas Traps for Ammonia, Freon-21, and Water Systems to Simplify Ground Processing

Gas traps are critical for the smooth operation of coolant loops because gas bubbles can cause loss of centrifugal pump prime, interference with sensor readings, inhibition of heat transfer, and blockage of passages to remote systems. Coolant loops are ubiquitous in space flight hardware, and thus there is a great need for this technology. Conventional gas traps will not function in micro-gravity due to the absence of buoyancy forces. Therefore, clever designs that make use of adhesion and momentum are required for adequate separation, preferable in a single pass. The gas traps currently used in water coolant loops on the International Space Station are composed of membrane tube sets in a shell. Each tube set is composed of a hydrophilic membrane (used for water transport and capture of bubbles) and a hydrophobic membrane (used for venting of air bubbles). For the hydrophilic membrane, there are two critical pressures, the pressure drop and the bubble pressure. The pressure drop is the decrease in system pressure across the gas trap. The bubble pressure is the pressure required for air bubbles to pass across the water filled membrane. A significant difference between these pressures is needed to ensure complete capture of air bubbles in a single pass. Bubbles trapped by the device adsorb on the hydrophobic membrane in the interior of the hydrophilic membrane tube. After adsorption, the air is vented due to a pressure drop of approximately 1 atmosphere across the membrane. For water systems, the air is vented to the ambient (cabin). Because water vapor can also transport across the hydrophobic membrane, it is critical that a minimum surface area is used to avoid excessive water loss (would like to have a closed loop for the coolant). The currently used gas traps only provide a difference in pressure drop and bubble pressure of 3-4 psid. This makes the gas traps susceptible to failure at high bubble loading and if gas venting is impaired. One mechanism for the latter is when particles adhere to the hydrophobic membrane, promoting formation of a water layer about it that can blind the membrane for gas transport (Figure 1). This mechanism is the most probable cause for observed failures with the existing design. The objective of this project was to devise a strategy for choosing new membrane materials (database development and procedure), redesign of the gas trap to mitigate blinding effects, and to develop a design that can be used in ammonia and Freon-21 coolant loops.

Ritchie, Stephen M. C.↗
NASA NTRS2010

Water Tank with Capillary Air/Liquid Separation

A bladderless water tank (see figure) has been developed that contains capillary devices that allow it to be filled and emptied, as needed, in microgravity. When filled with water, the tank shields human occupants of a spacecraft against cosmic radiation. A membrane that is permeable by air but is hydrophobic (neither wettable nor permeable by liquid water) covers one inside surface of the tank. Grooves between the surface and the membrane allow air to flow through vent holes in the surface as the tank is filled or drained. A margin of wettable surface surrounds the edges of the membrane, and all the other inside tank surfaces are also wettable. A fill/drain port is located in one corner of the tank and is covered with a hydrophilic membrane. As filling begins, water runs from the hydrophilic membrane into the corner fillets of the tank walls. Continued filling in the absence of gravity will result in a single contiguous air bubble that will be vented through the hydrophobic membrane. The bubble will be reduced in size until it becomes spherical and smaller than the tank thickness. Draining the tank reverses the process. Air is introduced through the hydrophobic membrane, and liquid continuity is maintained with the fill/drain port through the corner fillets. Even after the tank is emptied, as long as the suction pressure on the hydrophilic membrane does not exceed its bubble point, no air will be drawn into the liquid line.

Ungar, Eugene K.↗
DOE OSTI2021

Biodegradable surfactants and related compositions, methods and systems

Biodegradable surfactants are described, in which an amphiphilic heteroatom containing hydrocarbon optionally comprising at least one counterion (Z), and related compositions, methods and systems. Biodegradable surfactant described herein has an aHLB value in accordance with equation (1): aHLB=20*Gh/(Gh−Gt) (1) wherein Gh is the Group Number of a hydrophilic head portion of the biodegradable surfactant optionally comprising the at least one counterion (Z), and Gt is the Group Number of a hydrophobic tail portion of the biodegradable surfactant. A biodegradable surfactant in the sense of the disclosure can be tuned to a set hydrophilic-lipophilic balance (aHLB) by selectively modifying at least one tuning moiety of the biodegradable surfactants to provide tuned biodegradable surfactants having an increase or decrease in their adjusted hydrophilic-lipophilic balance (aHLB).

Lyman, Mathew Gerald↗
DOE OSTI2023

Ion-selective membrane for redox flow batteries

A fluoro sulfonated poly(phenylene) was rationally designed with an external hydrophobic shell and internal hydrophilic core in order to improve the durability and ion selectivity of a hydrocarbon membrane for vanadium redox flow batteries (VRFBs). The polymer was designed to prevent hydrophilic polymer chain aggregation by attaching acid moieties onto the polymer backbone, while functionalizing the external polymer shell with hydrophobic side chains to prevent excessive vanadium crossover associated with cation exchange membranes. As an example, the hydrophobic shell can be provided by pentafluorobenzoyl group functionalization of the pendent aryl groups on a Diels Alder poly(phenylene) backbone, while the internal polymer chain can contain sulfonic acid moieties to impart hydrophilic character.

Fujimoto, Cy↗