Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Hydrogen scatter”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Characterization of plasma in RF jet interacting with water: Thomson scattering versus spectral line broadening

Here, we carry out a detailed characterization of an Ar radiofrequency plasma jet interacting with liquid. The focus of the paper is measurement of the electron density by examining the Stark broadening of hydrogen Balmer α line and Thomson scattering (TS). Supporting diagnostics are done to investigate the channel evolution and movement, and gas temperature. The comparison of the two approaches shows the caveats and the advantages that should gain attention in future applications. In particular, the plasma channel dynamics have a significant impact on the TS signal and may result in physical phenomena being missed due to channel dislocations. The conclusions of the work elucidate the pitfalls for interpreting the results of TS when the discharge is a dynamic filamentary plasma. This work establishes the temporal evolution of the plasma and the gas parameters in a plasma–liquid system employed for investigation of plasma-induced electrodeless electrochemistry.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Connecting mechanical properties to hydrogen defects in PAN-based carbon fibers

Atomic-level defects dictate the mechanical properties of carbon fibers and strong correlations have been established between the crystallite sizes and mechanical properties. We recently demonstrated similar correlations with hydrogen content, but reliably quantifying the hydrogen content is not possible using only inelastic neutron scattering experiments. Here, we present prompt-gamma activation analysis (PGAA) experiments collected on 20 commercially available carbon fibers to quantify the hydrogen content of carbon fibers and find correlations between fiber modulus and hydrogen content. We then evaluate the role of hydrogen defect type and connect the PGAA results to both newly acquired and recently reported inelastic neutron scattering experiments. In conclusion, we find that intercalated hydrogen defects are preferentially removed at carbonization temperatures required for high-modulus fibers, potentially giving rise to voids within the carbon fibers that undermine their tensile strength.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Two-color scattering for the measurement of neutrals at the edge of fusion devices

Laser two-color scattering (TCS) is proposed to detect the neutral species in the edge of fusion devices, namely, tokamaks. Here, TCS uses two wavelengths to probe both the laser Rayleigh scattering and Thomson scattering of the neutral-electron bath, with emphasis on neutral density measurements such as that of hydrogen and deuterium. Modeling of the Rayleigh scattering of tokamak neutral species under various plasma conditions (electron density and temperature) shows that, with an appropriate filtering of the Thomson signal and by going to ultraviolet-region wavelengths, identification of the Rayleigh signal can be achieved. Photon count and signal fractions are calculated in two test cases, one in the midplane region of the National Spherical Torus Experiment and one in the divertor region of DIII-D. An uncertainty analysis and discussion of the feasibility of the TCS diagnostic is also presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Revealing the short-range structure of the mirror nuclei 3 H and 3 He

When protons and neutrons (nucleons) are bound into atomic nuclei, they are close enough to feel significant attraction, or repulsion, from the strong, short-distance part of the nucleon-nucleon interaction. These strong interactions lead to hard collisions between nucleons, generating pairs of highly energetic nucleons referred to as short-range correlations (SRCs). SRCs are an important but relatively poorly understood part of nuclear structure, and mapping out the strength and the isospin structure (neutron-proton (np) versus proton-proton (pp) pairs) of these virtual excitations is thus critical input for modelling a range of nuclear, particle and astrophysics measurements. Two-nucleon knockout or 'triple coincidence' reactions have been used to measure the relative contribution of np-SRCs and pp-SRCs by knocking out a proton from the SRC and detecting its partner nucleon (proton or neutron). These measurements have shown that SRCs are almost exclusively np pairs, but they had limited statistics and required large model-dependent final-state interaction corrections. Here we report on measurements using inclusive scattering from the mirror nuclei hydrogen-3 and helium-3 to extract the np/pp ratio of SRCs in systems with a mass number of three. In this work we obtain a measure of the np/pp SRC ratio that is an order of magnitude more precise than previous experiments, and find a marked deviation from the near-total np dominance observed in heavy nuclei. This result implies an unexpected structure in the high-momentum wavefunction for hydrogen-3 and helium-3. Understanding these results will improve our understanding of the short-range part of the nucleon-nucleon interaction.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2026

Measurement of the near-threshold 𝐽/𝜓 photoproduction cross section with the CLAS12 experiment

We present measurements of the total and differential cross sections for near-threshold 𝐽/𝜓 photoproduction obtained with the CLAS12 detector at the Thomas Jefferson National Accelerator Facility. The results are based on data collected during the fall 2018 and spring 2019 running periods, using electron beams with energies of 10.6 and 10.2 GeV, respectively, scattered off a liquid-hydrogen target. Near-threshold 𝐽/𝜓 photoproduction offers a unique sensitivity to the strong interaction in the nonperturbative regime of quantum chromodynamics (QCD). The energy dependence of the cross section constrains the underlying 𝐽/𝜓 production mechanisms, including multigluon exchange and potential baryonic excitations. Additionally, the 𝑡 dependence of the differential cross section can be related to the transverse spatial distribution of gluons in the proton, providing critical input for theoretical descriptions of the gluonic structure of the proton. An interpretation of the results in terms of the gluon content of the proton is presented, providing new experimental constraints on QCD-inspired models of the proton structure and the role of gluonic degrees of freedom in hadronic mass generation.

form factors↗
DOE OSTI2022

The proton charge radius

Nucleons (protons and neutrons) are the building blocks of atomic nuclei and are responsible for more than 99% of the visible matter in the Universe. Despite decades of efforts in studying its internal structure, there are still a number of puzzles surrounding the proton such as its spin and charge radius. Accurate knowledge about the proton charge radius is not only essential for understanding how QCD works in the nonperturbative region but also important for bound state QED calculations of atomic energy levels. It also has an impact on the Rydberg constant, one of the most precisely measured fundamental constants in nature. This review examines the latest situation concerning the proton charge radius in light of the new experimental results from both atomic hydrogen spectroscopy and electron-scattering measurements, with particular focus on the latter. Further, theoretical backgrounds and recent developments concerning the determination of the proton charge radius using different experimental techniques are also presented. Upcoming experiments are discussed, and the deuteron charge radius puzzle is mentioned at the end.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Measurement of H(e,e’) and D(e,e’) Cross-Sections for Bloom-Gilman Quark-Hadron Duality Study

The E12-10-002 experiment which ran in 2018 in Hall C at the Thomas Jefferson National Accelerator Facility measured the inclusive electron scattering cross-sections for hydrogen and deuterium. This was the first experiment conducted with the new Super High-Momentum Spectrometer and accompanying instrumentation. These measurements extend the previous Hall C measurements up to Q2 = 16 GeV2. This dissertation presents the analyses of the new detectors and shows the preliminary results for F2 structure function and the study of quark-hadron duality in the four nucleon-resonance regions.

Sun, Abel↗
DOE OSTI2023

Partial Wave Analysis of Strange Mesons Decaying to K+p+p- in the Reaction ¿p ¿ K+p+p-¿(1520) and the Commissioning of the GlueX DIRC Detector

Hadron spectroscopy is a cornerstone of our understanding of the strong nuclear interactions. Studying the hadron spectrum led to the postulation of quarks and gluons, and the development of Quantum Chromodynamics (QCD), the theory of the strong nuclear force. Today hadron spectroscopy provides an important test of QCD, particularly in the non-perturbative energy regime. One such test is the existence of hybrid hadrons that have gluonic degrees of freedom, e.g. q ?qg states, that are allowed by QCD but have remained elusive in experimental searches. The GlueX experiment located at Thomas Jefferson National Accelerator Facility, is designed to map the light meson spectrum, including hybrid mesons, produced by a linearly polarized photon beam that is scattered off of a liquid hydrogen target. This dissertation concerns the installation and commissioning of the GlueX DIRC upgrade and the analysis of three reactions measured by the GlueX experiment. The GlueX DIRC is a particle identification detector installed as an upgrade to the GlueX experiment in 2019 to improve the experiment?s ability to distinguish pions and kaons. The DIRC uses Cherenkov photons radiated by charged particles that travel faster than the speed of light in the detector medium to determine the velocity of said particles. The velocity measurement is used in conjunction with momentum measurements from other detectors to determine the mass of the particle. The DIRC will be essential to the future of strange meson spectroscopy in GlueX. The reactions ?p ? K+K??+??p, ?p ? K+K??0?0p, ?p ? K+K??0?p were initially chosen for this analysis to search for the hybrid meson candidate ?(2170) and related resonances. The ?(2170) has been observed in e+e? collider experiments decaying to K+K??+?? and K+K??0?0, among other final states. The ?(2170) was not observed in this analysis. The reaction ?p ? K+?+???(1520), a subset of the ?p ? K+K??+??p reaction, was analyzed with a Partial Wave Analysis (PWA) in order to study strange mesons that decay to K+?+??. In the PWA, a useful model for the angular distributions was found but no significant structures could be observed due to statistical limitations.

Hurley, Andrew↗
DOE OSTI2026

Extreme confinement of hydrogen gas within fullerenelike nanoporous carbon

Nanoporous carbons and carbon nanostructures can store hydrogen at cryogenic temperatures but lack the volumetric and gravimetric capacity to be industrially significant. Recent inelastic neutron scattering experiments suggest a highly dense phase of hydrogen at temperatures well above the melting point of solid hydrogen. However, it remains unclear how pore geometry and intermolecular interactions enable these dense phases to exist, with dispersion (van der Waals) or electrostatic/induction suggested to be the key effects in slit and curved pores but their relative contributions have yet to be quantified. In this paper, we perform benchmark electronic structure calculations allowing the interactions between planar and curved aromatic molecules with hydrogen to be accurately determined. Dispersion was found to dominate over electrostatic and inductive effects with some many-body charge transfer (Dobson type-A) effects needed to capture the most highly curved structures. Density functional methods that include type-A many-body effects were found to accurately describe the intermolecular interactions at a fraction of the cost of coupled-cluster simulations and these approaches were used to calculate the energies inside large carbon bowl and slit pores. The interaction energies inside the bowl pores were found to depend on the orientation of the hydrogen molecule. This rotational barrier, modeled as a quantum hindered rotor, could reproduce the peak splitting observed in inelastic neutron scattering experiments, with weak splitting arising from bowl-like fullerene pores and strong splitting from highly confining nanotubelike pores. Increasing the fraction of such curved pores in nanoporous carbons may therefore offer a pathway to enhance their hydrogen-storage capacity. Moreover, the preferential adsorption of ortho hydrogen on nanotubelike pores could enable the storage of high-density hydrogen without the need to remove heat produced during the ortho-para hydrogen conversion.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Anisotropic angular scattering models of elastic electron-neutral collisions for Monte Carlo plasma simulations

Many laboratory and industrial plasma applications require accurate modeling techniques to understand the interplay between microscopic and macroscopic processes. A prime example of this interplay is how particle and Monte Carlo (MC) simulation codes describe angular scattering of electrons following elastic scattering events. The forward peaked nature of high energy electron elastic scattering is relatively trivial to accurately describe in plasma simulations. However, for lower energy collisions, which produce near isotropic or backward peaked differential cross sections, there is not a strong consensus among the plasma modeling community on how to best describe these angular scattering trends. Here, in this study, we propose a systematic method to approximate the aforementioned non-trivial angular scattering behavior with a formula that can be readily implemented in particle-in-cell (PIC) and/or MC plasma simulation codes. The present approach is specifically applied to fusion relevant atomic hydrogen and helium, as well as for molecular hydrogen, and results are also applicable to the atomic isotopes and homonuclear molecular isotopologues of these species. Comparisons between the present angular distribution function and benchmark scattering data were used to validate the proposed models. In addition, two-term Boltzmann calculations and PIC direct simulation MC simulations revealed that the proposed angular distribution function is accurate, agreeing very well with benchmark convergent close-coupling scattering calculations, and electron transport measurements. These studies confirmed that the present angular distribution function model can be utilized without the need of renormalization to the momentum transfer cross section (as opposed to using the elastic scattering integrated cross section), which has been suggested by several studies in order to correct for deficient angular scattering models, and to agree with transport measurements. Hence, the present anisotropic angular scattering model can be utilized to accurately model the momentum transfer as well as the electron trajectories of elastic collisions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Crystallography of low Z material at ultrahigh pressure: Case study on solid hydrogen

Diamond anvil cell techniques have been improved to allow access to the multimegabar ultrahigh-pressure region for exploring novel phenomena in condensed matter. However, the only way to determine crystal structures of materials above 100 GPa, namely, X-ray diffraction (XRD), especially for low Z materials, remains nontrivial in the ultrahigh-pressure region, even with the availability of brilliant synchrotron X-ray sources. In this work,we perform a systematic study, choosing hydrogen (the lowest X-ray scatterer) as the subject, to understand how to better perform XRD measurements of low Z materials at multimegabar pressures. The techniques that we have developed have been proved to be effective in measuring the crystal structure of solid hydrogen up to 254 GPa at room temperature [C. Ji et al.,Nature 573, 558–562 (2019)]. We present our discoveries and experiences with regard to several aspects of this work, namely, diamond anvil selection, sample configuration for ultrahigh-pressure XRD studies,XRD diagnostics for low Z materials, and related issues in data interpretation and pressure calibration.We believe that these methods can be readily extended to other low Z materials and can pave the way for studying the crystal structure of hydrogen at higher pressures, eventually testing structural models of metallic hydrogen.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Fingerprints of hydrogen bonding in the terahertz dynamics of ethanol and water: An inelastic x-ray scattering study

Here, we used inelastic x-ray scattering methods to measure the terahertz spectrum of density fluctuations of ethanol in both liquid and solid phases. The results of a Bayesian inference-based lineshape analysis with a multiple excitation model and the comparison with a previous similar analysis on water indicate that the different structures induced by hydrogen bonds in ethanol and water have a profound influence on the respective dynamic responses, the latter being characterized by longer living and better resolved high-frequency acoustic excitations. In addition, we compare these findings with those obtained with an alternative approach based on the exponential expansion theory and ensuring sum rules fulfillment, demonstrating that the model’s choice directly impacts the number of spectral modes detected.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Precision Small Scattering Angle Measurements of Proton–Proton and Proton–Nucleus Analyzing Powers at the RHIC Hydrogen Jet Polarimeter

At RHIC, the hydrogen jet target polarimeter (HJET) is used to measure proton beam polarization with accuracy $σ^{syst}_{P}$ / $P$ ≲ 0.5% by counting low energy (1–10 MeV) recoil protons in left-right symmetric detectors. The HJET performance also allowed us to precisely measure $pp$ and $pA$ (where $A$ is any ion stored at RHIC) analyzing powers in the CNI region. The results of the measurements are discussed.

43 PARTICLE ACCELERATORS↗
DOE OSTI2024

STUDIES ON PIPELINE POLYETHYLENES IN HYDROGEN GAS ENVIRONMENTS USING IN-SITU AND EX-SITU CHARACTERIZATION METHODS

Polymeric materials are commonplace in the natural gas infrastructure as distribution pipes, coatings, seals, and gaskets. Under the auspices of the U.S. Department of Energy HyBlend program, one of the means to reduce greenhouse gas emissions is with replacing natural gas, either partially or completely, with hydrogen. This approach makes it imperative that we conduct near-term and long-term materials compatibility research in these relevant environments. Insights into the effects of hydrogen and hydrogen gas blends on polymer integrity can be gained through both ex-situ and in-situ analytical methods. Our work represented here highlights a study of the behavior of pipeline polyethylene (PE) materials, including HDPE (Dow 2490 and GDB50) and MDPE (Ineos and legacy Dupont Aldyl A), when exposed to hydrogen by means of in-situ X-ray scattering and ex-situ Raman spectroscopy techniques. Samples were tested in ex-situ hydrogen and argon gas environments and in-situ hydrogen environments to identify differences due to permeation and solubility of these gases. These methods complemented each other because Raman spectroscopy could capture permanent effects after materials were removed from gaseous environments, and in-situ X-ray scattering analysis collected real-time data to elucidate the impact of the gas environment on polymer microstructure. Data collected revealed that the aforementioned polymers did not show significant changes in crystallinity and microstructure under the exposure conditions tested. Our findings from these studies will help establish real-time effects caused by hydrogen gas transport through pipeline polyethylenes by way of its influence on polymer structure and chemistry, which is directly related to pipeline mechanical strength and longevity of service.

Hydrogen materials compatibility, Natural gas pipe↗
DOE OSTI2021

Investigating the non-classical M-H 2 bonding in OsClH 3 (PPh 3 ) 3

Dihydrogen ligation to metal centers results in a wide range of metal-hydrogen interactions. Compounds containing non-classical dihydrogen ligands in which the H-H contacts are significantly longer than the 0.74 A distance found in solid H 2 are classified as Kubas-like compounds, stretched dihydrogen ligands, or compressed dihydrides, depending on the H-H contact length. Compounds containing stretched dihydrogen and compressed dihydride ligands are somewhat rare. Developing a more complete understanding of the metal-hydrogen and hydrogen-hydrogen interactions in these species may provide insights into the mechanisms for the oxidative addition reaction and hydrogen storage. Here, we use diffraction and inelastic neutron scattering (INS) measurements, paired with both molecular and solid-state density functional theory (DFT), to fully characterize the nature of the metal-hydrogen and hydrogen-hydrogen interactions in a previously reported compound, OsClH 3 (PPh 3 ) 3 . In that report, the H-H distance was measured as 1.48(2) A by single-crystal neutron diffraction and was described as a "stretched" dihydrogen. The INS-generated phonon density of states is well described by the DFT calculations, including those normal modes dominated by the vibrational motions of the three Os-ligated hydrogen atoms. Additionally, the resulting calculated electron charge density landscape indicates that there is no remnant bonding character between the Os-ligated hydrogen atoms in the compound. Based on these findings, we update the understanding of the metal-hydrogen bonding in this complex and reclassify it as a compressed dihydride. As such, OsClH 3 (PPh 3 ) 3 represents a rare example of a non-classical compressed dihydride species.

08 HYDROGEN↗
DOE OSTI2021

Realization of a high luminosity muon beam at the Jefferson Lab

The proton is the major component of the visible matter of our universe, so being able to determine its fundamental properties, such as its charge radius, is of vital importance. In recent years, several experiments have been performed for the accurate measurement of the proton radius with different experimental techniques. The main and most common are based on two different techniques: ep scattering and Lamb shift spectroscopy of regular hydrogen atoms. The latter can also be performed on muonic hydrogen atoms with a significant improvement in accuracy. Recent measurements that use this method have highlighted a discrepancy between the results obtained with the diffusion of electrons and those obtained with the spectroscopic technique leading to the so-called ?proton radius puzzle?. The explanation of why this difference between the measured values exists is still a matter of discussion. The last attempt to address the puzzle was the PRad Experiment. It was performed with a unique experimental setup that gave the scientists an excellent control on the systematic errors that are usually present in electron-proton scattering experiments. This has significantly increased the precision of the measurement, bringing it in the same area as the spectroscopic ones done on muonic hydrogen atoms, which are considered the most precise. However, to solve the puzzle once and for all, even more precise electron scattering measurements are needed. Alternatively, new methods can be used, such as eg. muon-proton scattering at low transferred momenta in order to lower the systematic errors that comes with the measurement. This thesis tries to address this problem by studying the set up of an intense muon beam at the Jefferson Laboratory (JLab) that can be used to carry out a high-precision m ? p scattering experiment. Using Montecarlo simulations I studied the muon production resulting from the interaction of the primary electron beam with the beam-dump at JLab Hall-A. The simulations were performed using the FLUKA package via the FLAIR graphical interface. In this study, I modified an existing geometry (built for the ?Beam Dump eXperiment?) and performed several studies in order to optimize the muon beam parameters. In order to estimate the beam intensity, I studied the muon generation and transportation through the concrete bunker surrounding the Hall-A beam-dump. Detailed studies on muon attenuation and dispersion at different depth allowed me to track the beam profile in space and momentum as a function of the distance from the beam-dump. Last, but not least, I studied a possible tagging system for the muon beam. The tagging system will allow us to know with good precision (O(1=1000)) the energy of each muon of the beam. Based on the results obtained, I created an event generator that incorporates the detailed description of the muon beam (energy, position, emittance) useful to define and optimize the experimental setup for a future measurement of the proton radius at the JLab.

Fulci, Antonino↗
DOE OSTI2020

Pressure-induced phase transition in barium hydride studied with neutron scattering

Barium hydride can undergo a structural phase transition from an orthorhombic phase to a hexagonal phase induced by high temperature or high pressure. This transition causes an immediate increase in the hydrogen diffusion rates by over an order of magnitude, and therefore, understanding the origin and details of such transition is of great interest not only for fundamental reasons but also for improving materials for future applications. In this work, the pressure evolution of the crystal structure was characterized using neutron powder diffraction up to a maximum pressure of 11.3 GPa. The pressure dependence of the unit cell volumes, lattice parameters, atomic sites, and compressibilities were determined for both phases. A structural phase transition occurred over a wide pressure range of P = 1.3 GPa–4.9 GPa. The transition to the higher density hexagonal phase reduced the volume per formula unit of BaD 2 by 13.6%, hence increasing the volumetric storage density. In addition, we investigated the hydrogen diffusion process using high pressure quasi-elastic neutron scattering up to 7.1 GPa. Our results show that the hydrogen mobility increases with pressure in the hexagonal phase. This work sheds light on the structural and dynamical aspects of barium hydride caused by the application of high pressure. Finally, the results may aid in the development of advanced metal hydride systems with increased hydrogen dynamics.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Neutron scattering study of tantalum monohydride and monodeuteride

Powder samples of TaH 0.89 and TaD0.96 are synthesized under a hydrogen (deuterium) pressure of 2.8 GPa and a temperature of 250 °C, then quenched to the liquid nitrogen temperature, recovered to ambient pressure and studied by neutron diffraction (ND) and inelastic neutron scattering (INS). The ND study shows that both hydrogen and deuterium atoms occupy tetrahedral interstitial sites in a distorted body centered cubic (bcc) crystal structure of metal atoms, while the ordering scenarios in TaH 0.89 and TaD 0.96 are different. Hydrogen and deuterium atoms are ordered in a layered fashion, forming long period superstructures with space groups P$\bar{4}$ and P222, respectively, so that the unit cells of the crystal structures of TaH 0.89 and TaD 0.96 are $\sqrt{2}$ × $\sqrt{2}$ × 7 and $\sqrt{2}$ × $\sqrt{2}$ × 8 supercells of the initial cubic unit cell. The INS study demonstrates a pronounced “soft” (trumpet-like) anharmonicity of the potential well for H and D atoms.

08 HYDROGEN↗