Results for “HYDROCHLORIC ACID” — Page 6

NASA NTRS1973

Some environmental considerations relating to the interaction of the solid rocket motor exhaust with the atmosphere: Predicted chemical composition of exhaust species and predicted conditions for the formation of HCl aerosol

The exhaust products of a solid rocket motor using as propellant 14% binder, 16% aluminum, and 70% (wt) ammonium perchlorate consist of hydrogen chloride, water, alumina, and other compounds. The equilibrium and some frozen compositions of the chemical species upon interaction with the atmosphere were computed. The conditions under which hydrogen chloride interacts with the water vapor in humid air to form an aerosol containing hydrochloric acid were computed for various weight ratios of air/exhaust products. These computations were also performed for the case of a combined SRM and hydrogen-oxygen rocket engine. Regimes of temperature and relative humidity where this aerosol is expected were identified. Within these regimes, the concentration of HCL in the aerosol and weight fraction of aerosol to gas phase were plotted. Hydrochloric acid aerosol formation was found to be particularly likely in cool humid weather.

Rhein, R. A.↗

NASA NTRS1983

Topological reaction rate measurements related to scoffing

A ball-on-plate (both consisting of hardened M-50 steel) sliding elastohydrodynamic contact was run with trimethylolpropane triheptanoate (TMPTH) with and without tricresyl phosphate (TCP). The contact area of the plate was optically profiled with a phase-locked interference microscope (PLIM) both before and after exposure to alcoholic hydrochloric acid. As scuffing was approached, the profile within the contact region changed more rapidly after the acid treatment; after scuffing, it assumed a constant high value. A metallurgical phase found in the scuff mark was apparently responsible for the high reactivity. The microscopic profile changes (sensitivity, + or - 3 nm (+ or - A) in depth) involved primarily the small asperities (radius, 3 microns); the larger ones were unaffected. Soaking the steel in TCP smoothed the fine structure of the surface profile but increased its reactivity toward alcoholic hydrochloric acid before sliding was started. Thus it would appear that PLIM examination could be used for screening potentially scuff-resistant materials.

Lauer, J. L.↗

NASA NTRS1984

Topological reaction rate measurements related to scuffing

A ball-on-plate (both consisting of hardened M-50 steel) sliding elastohydrodynamic contact was run with trimethylolpropane triheptanoate (TMPTH) with and without tricresyl phosphate (TCP). The contact area of the plate was optically profiled with a phase-locked interference microscope (PLIM) both before and after exposure to alcoholic hydrochloric acid. As scuffing was approached, the profile within the contact region changed more rapidly after the acid treatment; after scuffing, it assumed a constant high value. A metallurgical phase found in the scuff mark was apparently responsible for the high reactivity. The microscopic profile changes (sensitivity, + or - 3 nm (+ or - A) in depth) involved primarily the small asperities (radius, 3 microns); the larger ones were unaffected. Soaking the steel in TCP smoothed the fine structure of the surface profile but increased its reactivity toward alcoholic hydrochloric acid before sliding was started. Thus it would appear that PLIM examination could be used for screening potentially scuff-resistant materials.

Lauer, J. L.↗

DOE OSTI2018

Solvent-pore interactions in the Eagle Ford shale formation

In this work, the effect of solvent extraction on pore space was examined on a suite of samples from the Eagle Ford Shale Formation with varying lithologies and maturities. Several solvents -toluene, cyclohexane, methanol, dichloromethane, and hydrochloric acid- were contacted with shale samples, extracting the compatible organic matter. The porosity in these extracted shale samples was compared to unmodified samples. The amount and type of organic matter extracted were determined using Gas Chromatography - Mass Spectrometry, and the porosity was determined by (Ultra) Small Angle Neutron Scattering. Mostly alkanes and aromatics were detected in the extracts, but other portions of bitumen may also have been present. Only higher molecular weight alkanes were extracted with hydrochloric acid, suggesting that physical dissolution of carbonate minerals may have liberated this portion of organic matter and the solvent was not able to penetrate the bitumen and kerogen to extract the lower molecular weight alkanes. Lastly, a decrease in porosity with extraction was observed and attributed to a dominant mechanism of kerogen swelling due to kerogen-solvent interaction.

02 PETROLEUM↗

DOE OSTI2018

Low-Temperature Carburization of AL-6XN Enabled by Provisional Passivation

Employing AISI-AL-6XN as example, we introduce a new method of surface activation for low-temperature carburization. This method consists of two steps: (i) removing the passivating surface oxide and a potentially existing severely plastically deformed surface layer (Beilby layer) by aqueous (liquid) hydrochloric acid, and (ii) immersion in ethanol and subsequent drying in nitrogen. Upon carburization with a gas mixture of acetylene, hydrogen, and nitrogen, this new method of surface activation enables the formation of a fully developed “case”, i.e., a uniform solid solution of interstitial carbon in austenite with carbon fractions up to 0.20 near the alloy surface. The underlying mechanism of surface activation is shown to involve the formation of a provisional passivating layer. It consists of chlorides or ethoxides that are insoluble in ethanol. It prevents the reformation of the regular Cr-rich passivating oxide layer and is readily removed upon heating and exposure to the carburizing gas. As the new activation method is quicker, more effective, and less destructive to furnace hardware than activation with hot gaseous hydrochloric acid that is currently applied in industrial manufacturing, it may have considerable technological impact.

Li, Zhen (ORCID:000000017245400X)↗

DOE OSTI2014

Iron oxide hydroxide nanoflower assisted removal of arsenic from water

Graphical abstract: Non-magnetic polycrystalline iron oxide hydroxide nanoparticle with flower like morphology is found to play as an effective adsorbent media to remove As(III) from 300 μg L{sup −1} to less than 10 μg L{sup −1} from drinking water over wide range of pH. TEM image clearly reveals that the nanoparticle looks flower like morphology with average particle size less than 20 nm. The maximum sorption capacity of the sorbent is found to be 475 μg g{sup −1} for arsenic at room temperature and the data fitted to different isotherm models indicate the heterogeneity of the adsorbent surface. The material can be regenerated up to 70% using dilute hydrochloric acid and it would be utilized for de-arsenification purposes. - Highlights: • The work includes synthesis of iron oxide hydroxide nanoflower and its applicability for the removal of arsenic from water. • The nanoparticle was characterized using modern instrumental methods like FESEM, TEM, BET, XRD, etc. • The maximum sorption capacity of the sorbent is found to be 475 μg g{sup −1} for arsenic at room temperature. • The sorption is multilayered on the heterogeneous surface of the nano adsorbent. • The mechanism of arsenic removal of IOH nanoflower follows both adsorption and ion-exchange. - Abstract: Non-magnetic polycrystalline iron oxide hydroxide nanoparticle with flower like morphology is found to play as an effective adsorbent media to remove As(III) from 300 μg L{sup −1} to less than 10 μg L{sup −1} from drinking water over wide range of pH. The nanoparticle was characterized by X-ray powder diffraction analysis (XRD), BET surface area, FTIR, FESEM and TEM images. TEM image clearly reveals flower like morphology with average particle size less than 20 nm. The nanoflower morphology is also supported by FESEM images. The maximum sorption capacity of the sorbent is found to be 475 μg g{sup −1} for arsenic and the data fitted to different isotherm models indicate the heterogeneity of the adsorbent surface. Study on adsorption kinetics shows that adsorption of arsenic onto iron oxide hydroxide nanoflower follows pseudo-second order kinetic. The material can be regenerated up to 70% using dilute hydrochloric acid and it would be utilized for de-arsenification purposes.

36 MATERIALS SCIENCE↗

NASA NTRS2004

Electrochemical Impedance Spectroscopy of Alloys in a Simulated Space Shuttle Launch Environment

Type 304L stainless steel (304L SS) tubing is currently used in various supply lines that service the Orbiter at NASA's John F. Kennedy Space Center Launch Pads in Florida (USA). The atmosphere at the Space Shuffle launch site is very corrosive due to a combination of factors, such as the proximity of the Atlantic Ocean and the concentrated hydrochloric acid produced by the fuel combustion reaction in the solid rocket boosters. The acidic chloride environment is aggressive to most metals and causes severe pitting in many of the common stainless steel alloys such as 304L SS. Stainless steel tubing is susceptible to pitting corrosion that can cause cracking and rupture of both high-pressure gas and fluid systems. Outages in the systems where failures occur can impact the normal operation of the shuttle and launch schedules. The use of a more corrosion resistant tubing alloy for launch pad applications would greatly reduce the probability of failure, improve safety, lessen maintenance costs, and reduce downtime. A study which included ten alloys was undertaken to find a more corrosion resistant material to replace the existing 304L SS tubing. The study included atmospheric exposure at NASA's John F. Kennedy Space Center outdoor corrosion test site near the launch pads and electrochemical measurements in the laboratory which included DC techniques and electrochemical impedance spectroscopy (EIS). This paper presents the results from EIS measurements on three of the alloys: AL6XN (UN N08367), 254SMO (UNS S32l54), and 304L SS (UNS S30403). Type 304L SS was included in the study as a control. The alloys were tested in three electrolyte solutions which consisted of neutral 3.55% NaC1, 3.55% NaCl in O.1N HC1, and 3.55% NaCl in 1.ON HC1. The solutions were chosen to simulate environments that were expected to be less, similar, and more aggressive, respectively, than those present at the Space Shuttle launch pads. The results from the EIS measurements were analyzed to evaluate the corrosion susceptibility of the alloys and to predict the long-term corrosion performance of the subject materials. The results from the EIS measurements for the three alloys indicated that the higher-alloyed 254SMO and AL6XN exhibited a significantly improved resistance to corrosion than the 304L SS as the concentration of hydrochloric acid in the 3.55% NaC1 solution was increased. The polarization resistance values obtained from the EIS measurements were consistent with those from linear polarization measurements, and were indicative of the actual long-term corrosion performance of the alloys during a two-year atmospheric exposure study.

Calle, L. M.↗

DOE OSTI2012

Supercapacitor behavior of α-MnMoO{sub 4} nanorods on different electrolytes

Graphical abstract: SEM image of α-MnMoO{sub 4} nanorods on FTO substrate. Highlights: ► Synthesis of α-MnMoO{sub 4} nanorods by spin coating method. ► First study on the effect of electrolyte on the pseudocapacitance behavior. ► α-MnMoO{sub 4} nanorods exhibit maximum specific capacitance of 998 F/g. ► At higher scan rates p-TSA electrolyte exhibits superior capacitive behavior. -- Abstract: α-MnMoO{sub 4} nanorods were prepared on conducting glass substrate via sol–gel spin coating method at the optimum doping level. The effect of electrolyte on the pseudocapacitance behavior of the α-MnMoO{sub 4} nanorods was studied using para toluene sulfonic acid (p-TSA), sulfuric acid (H{sub 2}SO{sub 4}) and hydrochloric acid (HCl) as electrolytes. X-ray diffraction analysis reveals the formation of α-MnMoO{sub 4} in monoclinic phase. FTIR spectra contain vibrational bands associated with Mo=O, M–O and Mo–O–Mo bonds. SEM image reveals the formation of nanorods. Supercapacitor behavior has been studied using cyclic voltammetry (CV) analysis. α-MnMoO{sub 4} nanorods exhibit maximum specific capacitance of 998 F/g at a scan rate of 5 mV/s in H{sub 2}SO{sub 4} electrolyte while a specific capacitance of 784 F/g and 530 F/g have been obtained using p-TSA and HCl electrolytes, respectively. At higher scan rates p-TSA electrolyte exhibits superior capacitive behavior than H{sub 2}SO{sub 4}.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Materials Data on CoH18CN6ClO3 by Materials Project

(Co(NH3)6)2(CO3)2Cl2 is half-Heusler structured and crystallizes in the cubic P2_13 space group. The structure is zero-dimensional and consists of four azane;cobalt molecules, four carbonic acid molecules, and four hydrochloric acid molecules.

36 MATERIALS SCIENCE↗

NASA NTRS1997

FTIR Spectroscopy of HNO3 and NO2 Relevant to Stratospheric Wake Analysis

The Fourier Transform Infrared (FTIR) technique has been employed to measure absolute concentrations of nitric acid (HNO3) and nitrogen dioxide (NO2) with 1/cm resolution and an absorption pathlength of 4 m under quasi-static and flow conditions at atmospheric pressure and room temperature. Water features seen under quasi-static conditions diminished in intensity under flowing conditions. Nitric acid was observed in the 1660-1760/cm range, while nitrogen dioxide was detected both in the 1536-1660 and 1213-1400/cm ranges. Concentrations of nitrogen dioxide and nitric acid were determined to be 11.9 and 4.35 parts per million (ppm), respectively, with an uncertainty of 0.2 ppm. Experiments are underway with a 10 m cell to measure the absorption of nitric acid, water, sulfur dioxide, hydrochloric acid and ammonia on various materials such as glass, teflon, stainless steel and aluminum used for implementation of the flow system. Such materials will be used for the measurements of stratospheric trace gases by the Quartz Crystal Microbalance (QCM) and Surface Acoustic Wave (SAW) devices.

Abina, Rafiu A.↗

DOE OSTI2018

Role of macrocyclic effect in complex formation of palladium(II) with ligands anchored on a solid support

The method for grafting dithiacrown ether and its linear analogue to the silica surface using preliminary prepared organosilicon derivative is developed. The importance of the acylation step in the process of grafting is underlined. The acylation is required to prevent sorption of platinum metals complex anions by the anion exchange mechanism, the probability of which increases due to protonation of the spacer in an acidic medium. The interaction of palladium(II) with anchored ligands in hydrochloric acid media was studied in details. The comparative study of two sorbents revealed that the macrocyclic effect plays a negligible role in binding of palladi um(II) ions. Therefore, linear ligands are preferred for the development of sorbents for molecular recognition of platinum metals ions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NASA NTRS1966

Electrochemical Data, Part IV Quarterly Report, Jul. 1 - Sep. 30, 1966

Electrolytic equivalent conductance values of hydrochloric acid

HYDROCHLORIC ACID↗

DOE OSTI2013

Field and Laboratory Studies of Reactions between Atmospheric Water Soluble Organic Acids and Inorganic Particles

Atmospheric inorganic particles undergo complex heterogeneous reactions that change their physicochemical properties. Depletion of chloride in sea salt particles was reported in previous field studies and was attributed to the acid displacement of chlorides with inorganic acids, such as nitric and sulfuric acids [1-2]. Recently, we showed that NaCl can react with water soluble organic acids (WSOA) and release gaseous hydrochloric acid (HCl) resulting in formation of organic salts [3]. A similar mechanism is also applicable to mixed WSOA/nitrate particles where multi-phase reactions are driven by the volatility of nitric acid. Furthermore, secondary organic material, which is a complex mixture of carboxylic acids, exhibits the same reactivity towards chlorides and nitrates. Here, we present a systematic study of reactions between atmospheric relevant WSOA, SOM, and inorganic salts including NaCl, NaNO3, and Ca(NO3)2 using complementary micro-spectroscopy analysis.

Acid Replacement↗

DOE OSTI2018

Novel Membrane and Electrodeposition-Based Separation and Recovery of Rare Earth Elements from Coal Combustion Residues (Final Report)

This project developed a hydrometallurgical-based technology to extract and concentrate rare earth elements (REEs) from a representative group of coal combustion residuals (CCRs) from major coal sources in the United States. The approach for REE recovery comprises two general components: (1) Leaching of REEs from CCRs and (2) Separation of REEs from other major ions in the CCR leachate. The leaching step entails acid leaching with nitric or hydrochloric acid, and in some cases, pretreatment of CCRs with alkaline roasting prior to acid leaching. The follow-up REE recovery steps involve a series of membrane-based methods to separate and concentrate rare earth ions from other major ions in acid leachates of CCRs. These methods include liquid emulsion membranes, supported liquid membranes and electrodeposition with carbon nanotube electrochemical filters. The advantage of these separation approaches (relative to conventional approaches such as solvent extraction) is a reduction in the usage of solvents and other costly chemicals and a reduction of hazardous waste products that are challenges in conventional REE separation methods. In the testing of our process, we selected a representative set of CCR samples from our collection and performed a suite of characterization measurements (total REE content and major mineralogy). The major results of this work demonstrated that heated acid leaching could efficiently extract REEs from PRB-based coal fly ashes while the Appalachian and Illinois Basin CCRs required alkaline roasting with NaOH prior to acid leaching at room temperature. The supported liquid membrane (SLM) configuration and electrochemical deposition (ED) system yielded the most promising methods of REE recovery from the acid leachates of fly ash. Our most concentrated product to date comprised 1 wt.% (dry basis) REEs produced from an Appalachian-based fly ash leached and purified by SLM. The SLM separation process was more selective for heavy REEs over the light REEs. When SLM was combined with ED, preliminary results demonstrated that a final product of >2 wt.% REEs was possible.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Novel Membrane and Electrodeposition-Based Separation and Recovery of Rare Earth Elements from Coal Combustion Residues (Final Report)

This project developed a hydrometallurgical-based technology to extract and concentrate rare earth elements (REEs) from a representative group of coal combustion residuals (CCRs) from major coal sources in the United States. The approach for REE recovery comprises two general components: (1) Leaching of REEs from CCRs and (2) Separation of REEs from other major ions in the CCR leachate. The leaching step entails acid leaching with nitric or hydrochloric acid, and in some cases, pretreatment of CCRs with alkaline roasting prior to acid leaching. The follow-up REE recovery steps involve a series of membrane-based methods to separate and concentrate rare earth ions from other major ions in acid leachates of CCRs. These methods include liquid emulsion membranes, supported liquid membranes and electrodeposition with carbon nanotube electrochemical filters. The advantage of these separation approaches (relative to conventional approaches such as solvent extraction) is a reduction in the usage of solvents and other costly chemicals and a reduction of hazardous waste products that are challenges in conventional REE separation methods. In the testing of our process, we selected a representative set of CCR samples from our collection and performed a suite of characterization measurements (total REE content and major mineralogy). The major results of this work demonstrated that heated acid leaching could efficiently extract REEs from PRB-based coal fly ashes while the Appalachian and Illinois Basin CCRs required alkaline roasting with NaOH prior to acid leaching at room temperature. The supported liquid membrane (SLM) configuration and electrochemical deposition (ED) system yielded the most promising methods of REE recovery from the acid leachates of fly ash. Our most concentrated product to date comprised 1 wt.% (dry basis) REEs produced from an Appalachian-based fly ash leached and purified by SLM. The SLM separation process was more selective for heavy REEs over the light REEs. When SLM was combined with ED, preliminary results demonstrated that a final product of >2 wt.% REEs was possible.

01 COAL, LIGNITE, AND PEAT↗

NASA NTRS1980

Etchant for incoloy-903 welds

Special reagent consists of 1 part 90% lactic acid, 1 part 70% nitric acid, and 4 part, 37% hydrochloric acid. Solution etches parent and weld metals at same rate, without overetching. Underlying grain structure of both metals is revealed.

Gerstmeyer, J. A.↗

NASA NTRS1980

Fourier spectroscopy of the stratospheric emission

Stratospheric emission spectra in the submillimeter range have been recorded with a resolution of 0.0033/cm with a balloon-borne interferometer. Several minor atmospheric constituents have been identified in a preliminary analysis of the spectra; these are water vapor, oxygen, ozone isotopes, nitric acid, nitrous oxide, hydrofluoric and hydrochloric acids, and carbon monoxide.

Carli, B.↗

NASA NTRS1993

Chemical loss of ozone in the Arctic polar vortex in the winter of 1991- 1992

In situ measurements of chlorine monoxide, bromine monoxide, and ozone are extrapolated globally, with the use of meteorological tracers, to infer the loss rates for ozone in the Arctic lower stratosphere during the Airborne Arctic Stratospheric Expedition II (AASE II) in the winter of 1991-1992. The analysis indicates removal of 15 to 20 percent of ambient ozone because of elevated concentrations of chlorine monoxide and bromine monoxide. Observations during AASE II define rates of removal of chlorine monoxide attributable to reaction with nitrogen dioxide (produced by photolysis of nitric acid) and to production of hydrochloric acid. Ozone loss ceased in March as concentrations of chlorine monoxide declined. Ozone losses could approach 50 percent if regeneration of nitrogen dioxide were inhibited by irreversible removal of nitrogen oxides (denitrification), as presently observed in the Antarctic, or without denitrification if inorganic chlorine concentrations were to double.

Salawitch, R. J.↗