Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “HOLE DISTRIBUTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

Coronal holes and solar magnetic fields

Since 1972 nearly continuous observations of coronal holes and their associated photospheric magnetic fields have been made using a variety of satellite and ground-based equipment. The present paper reviews the results of comparisons of these data and shows that the structure and evolution of coronal holes is basically governed by the large-scale distribution of photospheric magnetic flux. Nonpolar holes form in the decaying remnants of bipolar magnetic regions in areas with a large-scale flux imbalance. In addition, there is strong indirect evidence that the magnetic field in coronal holes is always open to interplanetary space, but not all open-field regions have associated coronal holes.

Harvey, J. W.↗
NASA NTRS1998

Heat Transfer on a Film-Cooled Blade - Effect of Hole Physics

A multi-block, three-dimensional Navier-Stokes code has been used to study the within-hole and near-hole physics in relation to heat transfer on a film-cooled blade. The flow domain consists of the coolant flow through the plenum and hole-pipes for the three staggered rows of shower-head holes on the VK1 rotor, and the main flow over the blade. A multi-block grid is generated that is nearly orthogonal to the various surfaces. It may be noted that for the VK1 rotor the shower-head holes are inclined at 30 deg. to the spanwise direction, and are normal to the streamwise direction on the blade. Wilcox's k-omega turbulence model is used. The present study provides a much better comparison for the heat transfer coefficient at the blade mid-span with the experimental data than an earlier analysis wherein coolant velocity and temperature distributions were specified at the hole exits rather than extending the computational domain into the hole-pipe and plenum. Details of the distributions of coolant velocity, temperature, k and omega at the hole exits are also presented.

Garg, Vijay K.↗
NASA NTRS1987

CO observations of nearby galaxies and the efficiency of star formation

The CO distributions and total molecular content of 160 galaxies were observed using the 14 meter millimeter telescope of the FCRAO. For the luminous, relatively face-on Sc galaxies, the azimuthally averaged CO distributions are centrally peaked, while for the Sb and Sa galaxies the Co distributions often exhibit central CO holes up to 5 kpc across. None of the Sc galaxies have CO distributions which resemble the Milky Way. A general correlation was found between total CO and IR luminosities in galaxies. The scatter in this relation is highly correlated with dust temperature. No strong correlation of IR luminosities was found with HI masses, and it was thereby concluded that the infrared emission is more directly tied to the molecular content of galaxies. It is suggested that galaxies which have high Star Formation Effiencies (SFEs) produce more stars per unit molecular mass, thereby increasing the average temperature of the dust in the star forming regions. Irregular galaxies and galaxies previously identified as mergers have the highest observed star formation efficiencies. For the mergers, evidence was found that the IR/CO luminosity ratio increases with the merger age estimated by Joseph and Wright (1985).

Young, Judith S.↗
NASA NTRS1999

Heat Transfer on a Film-Cooled Blade: Effect of Hole Physics

A multiblock, three-dimensional Navier Stokes code has been used to study the within-hole and near-hole physics in relation to heat transfer on a film-cooled blade. The flow domain consists of the coolant flow through the plenum and hole-pipes for the three staggered rows of shower-head holes on the VKI rotor, and the main flow over the blade. A multiblock grid is generated that is nearly orthogonal to the various surfaces. It may be noted that for the VKI rotor the shower-head holes are inclined at 30 deg to the spanwise direction, and are normal to the streamwise direction on the blade. Wilcox's k-omega turbulence model is used. The present study provides a much better comparison for the span-averaged heat transfer coefficient on the blade surface with the experimental data than an earlier analysis wherein coolant velocity and temperature distributions were specified at the hole exits rather than extending the computational domain into the hole-pipe and plenum. Details of the distributions of coolant velocity, temperature, k and omega at the hole exits are also presented.

Garg, Vijay K.↗
NASA NTRS1995

Effect of open hole on tensile failure properties of 2D triaxial braided textile composites and tape equivalents

The unnotched and notched (open hole) tensile strength and failure mechanisms of two-dimensional (2D) triaxial braided composites were examined. The effect of notch size and notch position were investigated. Damage initiation and propagation in notched and unnotched coupons were also examined. Theory developed to predict the normal stress distribution near an open hole and failure for tape laminated composites was evaluated for its applicability to triaxial braided textile composite materials. Four fiber architectures were considered with different combinations of braid angle, longitudinal and braider yam size, and percentage of longitudinal yarns. Tape laminates equivalent to textile composites were also constructed for comparison. Unnotched tape equivalents were stronger than braided textiles but exhibited greater notch sensitivity. Notched textiles and tape equivalents have roughly the same strength at large notch sizes. Two common damage mechanisms were found: braider yams cracking and near notch longitudinal yarn splitting. Cracking was found to initiate in braider yarns in unnotched and notched coupons, and propagate in the direction of the braider yarns until failure. Longitudinal yarn splitting occurred in three of four architectures that were longitudinally fiber dominated. Damage initiation stress decreased with increasing braid angle. No significant differences in prediction of near notch stress between measured and predicted stress were weak for textiles with large braid angle. Notch strength could not be predicted using existing anisotropic theory for braided textiles due to their insensitivity to notch.

Norman, Timothy L.↗
NASA NTRS1995

Tension Strength, Failure Prediction and Damage Mechanisms in 2D Triaxial Braided Composites with Notch

The unnotched and notched (open hole) tensile strength and failure mechanisms of two-dimensional (2D) triaxial braided composites were examined. The effect of notch size and notch position were investigated. Damage initiation and propagation in notched and unnotched coupons were also examined. Theory developed to predict the normal stress distribution near an open hole and failure for tape laminated composites was evaluated for its applicability to 2D triaxial braided textile composite materials. Four different fiber architectures were considered; braid angle, yarn and braider size, percentage of longitudinal yarns and braider angle varied. Tape laminates equivalent to textile composites were also constructed for comparison. Unnotched tape equivalents were stronger than braided textiles but exhibited greater notch sensitivity. Notched textiles and tape equivalents have roughly the same strength at large notch sizes. Two common damage mechanisms were found: braider yarn cracking and near notch longitudinal yarn splitting. Cracking was found to initiate in braider yarns in unnotched and notched coupons, and propagate in the direction of the braider yarns until failure. Damage initiation stress decreased with increasing braid angle. No significant differences in prediction of near notch strain between textile and tape equivalents could be detected for small braid angle, but the correlations were weak for textiles with large braid angle. Notch strength could not be predicted using existing anisotropic theory for braided textiles due to their insensitivity to notch.

Norman, Timothy L.↗
NASA NTRS1989

Electron velocity space hole modes and narrowband electrostatic noise in the distant tail

Narrowband electrostatic noise (NEN) is frequently observed upstream of the slow shocks in the distant tail. It is suggested that NEN represents a nonstandard plasma wave mode which results from a hole in the low energy electron velocity distribution. A very simple model which plausibly indicates how a hole might be formed by the interaction of the electrons with the slow shock is presented. The hole mode is destabilized by a positive slope in the parallel electron distribution and/or by a weak beam of energetic ions which escape upstream from the slow shock.

Coroniti, Ferdinand V.↗
NASA NTRS1995

The fate of the solid matter orbiting HR 4796A

We have obtained optical spectra, 2 micrometers speckle images, and an upper limit to the 800 micrometers flux for HR 4796A, and optical spectra for its physical companion separated by 7.7 arcsecs, HR 4796B. We detect H-beta, H-gamma, and the calcium H and K lines in emission from HR 4796B; these data are consistent with the hypothesis that it is later than spectral type M2 and lies substantially above the main-sequence. From the location of HR 4796B on the H-R diagram, the estimated age of this star is 3 x 10(exp 6) yr, and assuming this age for the entire system, we find from our 2 micrometers speckle data that there is no close stellar companion to HR 4796A (M greater than 0.125 solar mass) between 11 and 120 AU from the star. From the IRAS and ground-based photometry, it seems that there is a hole in the dust distribution around HR 4796A with an inner radius of between approximately 40 and approximately 200 AU. The observed circumstellar dust grains, which lie at D greater than 40 AU from the star, are likely to be at least 3 micrometers in radius in order to be gravitationally bound to HR 4796A, if the circumstellar dust cloud is optically thin. Since they are larger than almost all interstellar grains, the circumstellar dust grains probably grew by coalescence. Because the existing grains at D greater than 40 AU have undergone measurable coalescence, it is possible that particles that presumably once existed at D less than 40 AU, where the collision times were shorter than at D greater than 40 AU, grew into macroscopic objects. A likely explanation for the dust hole is that there is a companion located at about half the inner radius of the dust hole, or between 20 and 100 AU from the star. If such a companion exists, it must have a mass less than 0.125 solar mass. Since grain coalescence has occurred, this putative companion possibly could be a planet.

Jura, M.↗
NASA NTRS1983

Synthesis maps of ultraviolet observations of neutral interstellar gas

Copernicus and IUE measurements of neutral hydrogen column densities have been taken for about 140 stars distributed between 10 and 3000 pc from the sun and plotted in several maps to directly yield estimates of contours of neutral hydrogen column density in the 5-500 x 10 to the 17th/sq cm range. These maps show that low column density neutral hydrogen is asymmetrically distributed around the sun with a 'hole' in the neutral hydrogen located in the third quadrant. This distribution mirrors that of nearby B stars associated with the Gould belt. The maps clearly show the directions in which observations at wavelengths less than 912 A will be most successful.

Frisch, P. C.↗
NASA NTRS1986

Attaching Metal Fasteners to Silica Tiles

Stress distributed so high load borne. Fastener bonded in densified hole or captured in plug of similar refractory material, which in turn bonded in hole in parent tile. Plug or bonding distributes mechanical load from fastener to broad region surrounding fastener, reducing local stress concentration and likelihood of breakage. Bonded-plug method has been successful in attaching mechanical fasteners to porous silica refractory tiles used on outer surface of Space Shuttle orbiter.

Holt, J. W.↗
NASA NTRS1977

Far-infrared emission from compact sources in NGC 2264 and the Rosette Nebula

The paper reports the discovery of far-IR emission at 53, 100, and 175 microns from two sources (one in NGC 2264 and another near the Rosette Nebula) associated with molecular clouds but not with any detectable radio continuum emission. The maximum source diameters are estimated to be 20 arcsec, and the spectra of both objects are shown to be broader than that of a 'typical' H II region. It is found that both objects are unresolved at all the IR wavelengths observed, have relatively wide IR spectra, are located at or near the apices of fan-shaped cometary nebulae, have colors between 50 and 200 microns that are among the coolest of any observed far-IR sources, and have luminosities that are an order of magnitude less than the weakest sources observed near compact H II regions. A cylindrically symmetric source model is considered in which a 'hole' in the dust distribution around the central source provides the visible luminosity of the nearby nebula and the dust temperature decreases rapidly with distance. It is suggested that the central sources are probably pre-main-sequence stellar objects with masses of 5 to 10 solar masses and luminosities of a few thousand suns.

Harvey, P. M.↗
NASA NTRS1990

Luminosity-velocity diagrams for Virgo Cluster spirals. I - Inner rotation curves

Optical rotation curves are presented for the innermost portions of nine spiral galaxies in the Virgo Cluster. The emission-line (H-alpha and forbidden N II) velocity data are to be used in combination with new CCD photometry to construct luminosity-velocity diagrams, in a continuing investigation of an apparent initial linear branch and its potential as a distance indicator. Compared to recent H I data, the present optical rotation curves generally show systematically steeper inner gradients. This effect is ascribed to the poorer resolution of the H I data and/or to holes in the gas distribution.

Woods, David↗
NASA NTRS1990

Improved high power/high frequency inductor

A toroidal core is mounted on an alignment disc having uniformly distributed circumferential notches or holes therein. Wire is then wound about the toroidal core in a uniform pattern defined by the notches or holes. Prior to winding, the wire may be placed within shrink tubing. The shrink tubing is then wound about the alignment disc and core and then heat-shrunk to positively retain the wire in the uniform position on the toroidal core.

Mclyman, W. T.↗
NASA NTRS1995

Acceleration phenomena of high-speed wind observed at 0.1-0.3 AU with interplanetary scintillation

The radial distance dependence of solar wind speeds, which were measured by interplanetary scintillation method, has been studied especially for a high-speed solar wind, and large increase of the IPS speeds (300 km/s) was observed at the distance range of 0.1 - 0.3 AU. When the streams are mapped back onto the source surface, they distribute in polar coronal holes or their boundaries. Since the IPS measurement can be biased by several effects such as of line-of-sight integration, strong scattering and random velocities, we examined these biasing effects and have found difficulty to explain the large IPS speed increase with the biasing effects.

Kojima, M.↗
NASA NTRS2019

STROBE-X: X-ray Timing & Spectroscopy on Dynamical Timescales from Milliseconds to Years

We describe a probe-class mission concept that provides an unprecedented view of the X-ray sky, performing timing and 0.2-30 keV spectroscopy over timescales from microseconds to years. The Spectroscopic Time-Resolving Observatory for Broadband Energy X-rays (STROBE-X) has three key science drivers: (1) measuring the spin distribution of accreting black holes, (2) understanding the equation of state of dense matter, and (3) exploring the properties of the precursors and electromagnetic counterparts of gravitational wave sources. To perform these science investigations, STROBE-X comprises three primary instruments. The first uses an array of lightweight optics (3-m focal length) that concentrate incident photons onto solid state detectors with CCD-level (85-130 eV) energy resolution, 100 ns time resolution, and low background rates to cover the 0.2-12 keV band. This technology is scaled up from NICER, with enhanced optics to take advantage of the longer focal length of STROBE-X. The second uses large-area collimated silicon drift detectors, developed for ESA's LOFT, to cover the 2-30 keV band. These two instruments each provide an order of magnitude improvement in effective area compared with its predecessor (NICER and RXTE, respectively). Finally, a sensitive sky monitor triggers pointed observations, provides high duty cycle, high time resolution, high spectral resolution monitoring of the X-ray sky with ~20 times the sensitivity of the RXTE ASM, and enables multi-wavelength and multi-messenger studies on a continuous, rather than scanning basis. The STROBE-X mission concept is a rapidly repointable observatory in low-Earth orbit, similar to RXTE or Swift, and will be presented to the 2020 Astrophysics Decadal Survey for consideration as a probe-class mission.

STROBE-X: X-ray↗
NASA NTRS1994

Ulysses field and plasma observations of magnetic holes in the solar wind and their relation to mirror-mode structures

The term 'magnetic hole' has been used to denote isolated intervals when the magnitude of the interplanetary magnetic field drops to a few tenths, or less, of its ambient value for a time that corresponds to a linear dimension of tens to a few hundreds of proton gyro-radii. Data obtained by the Ulysses magnetometer and solar wind anlayzer have been combined to study the properties of such magnetic holes in the solar wind between 1 AU and 5.4 AU and to 23 deg south latitude. In order to avoid confusion with decreases in field strength at interplanetary discontinuities, the study has focused on linear holes across which the field direction changed by less than 5 deg. The holes occurred preferentially, but not without exception, in the interaction regions on the leading edges of high-speed solar wind streams. Although the plasma surrounding the holes was generally stable against the mirror instability, there are indications that the holes may have been remnants of mirror-mode structures created upstream of the points of observation. Those indications include the following: (1) For the few holes for which proton of alpha-particle pressure could be measured inside the hole, the ion thermal pressure was always greater than in the plasma adjacent to the holes. (2) The plasma surrounding many of the holes was marginally stable for the mirror mode, while the plasma environment of all holes was significantly closer to mirror instability than was the average solar wind. (3) The plasma containing trains of closely spaced holes was closer to mirror instability than was the plasma containing isolated holes. (4) The near-hole plasma had much higher ion beta (ratio of thermal to magnetic pressure) than did the average solar wind. (5) Near the holes, T(sub perp)/T(sub parallel) tended to be either greater than 1 or larger than in the average wind. (6) The proton and alpha-particle distribution functions measured inside the holes occasionally exhibited the flattened phase-space-density contoures in nu(sub perp)/nu(sub parallel) space found in some numerical simulations of the mirror instability.

Winterhalter, Daniel↗
NASA NTRS2020

What Could Be the Observational Signature of Dark Matter in Globular Clusters?

Here we investigate the possibility that some globular clusters (GCs) harbor intermediate mass black holes (BH) in their centers and are also embedded in a low-mass dark matter (DM) halo. Up to date, there is no evidence on whether or not GCs have DM in their constitution. For standard cold DM cosmology, it is expected that GCs form with their own DM halos. Other studies investigate the possibility that GCs were initially embedded in massive DM halos that evolved during the cluster lifetime. An additional intriguing question is related to the existence of intermediate mass black holes (IMBH) in the GCs. The determination of whether GCs hold IMBHs would be able to answer important questions about GCs formation and the circumstances that gave rise to the IMBHs. DM & IMBH in the context of GCs are interesting subjects to be studied and we will perform such studies here, assuming the coexistence of both of them in some GCs. Having such information, we perform the study possible DM signals from GCs. One important subject to be studied is the DM density profile. In the inner regions of GCs, the DM density profile is still an open question of fundamental importance to DM studies, specially for the study of radio and γ-ray emission from DM annihilation in such regions. Here we consider the case of IMBHs in the inner regions of three GCs: 47 Tuc, NGC 6266 and ω Cen. The existence of a black hole (BH) directly affects the matter distribution in its vicinity. These effects are significant for IMBHs as well as supermassive black holes (SMBHs) and can lead to large DM overdensities called spikes. In this paper, we direct our studies to the radio synchrotron emission from DM annihilation with spike profiles around possible IMBHs in GCs. We present our results for synchrotron emission produced by DM annihilation via bbar b channel. We use the best-fit DM mass of 34 GeV and annihilation channel in bbar b used to explain the Galactic center "excess" and perform our analysis for the estimated radio flux. We direct our attention specially to the γ-ray emission from 47 Tuc. When considering a scenario wich includes a BH and the combined analysis of multi-wavelength studies, we conclude that some parameter choice as the annihilation cross section ⟨σ v⟩ used to fit the γ-ray excess differs by many orders of magnitude from the one necessary to fit the radio observations for this globular cluster if we consider the BH scenario.

Elaine C F S Fortes↗