Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “HOLE DISTRIBUTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

The calcium K-line network in coronal holes

Microphotometry of calcium K-line photographs in the regions of polar coronal holes shows that the chromospheric network exterior to a hole has a slightly broader intensity distribution than that inside the hole itself, a fact which can be attributed to a greater number of bright network elements outside the hole. These bright elements presumably represent the enhanced network resulting from the dispersal of magnetic flux from old active regions, a hypothesis which is consistent with current ideas of coronal-hole formation.

Marsh, K. A.↗
DOE OSTI2021

Monte Carlo simulation of the passage of $\gamma$-rays and $\alpha$-particles in CsI

In this work, theoretical and computational methods for simulating the creation of ionization tracks by fast ions in solids were applied to the passage of a-particles in CsI, an inorganic scintillator commonly used for radiation detection. The methods were implemented in a Monte Carlo program to simulate the interaction of $\alpha$-particles, with incident energies of up to 1 MeV, with CsI. The simulations followed the fate of individual electron-hole pairs and thus allowed for a detailed description of the microscopic structure of ionization tracks created by incident radiation. Simulations were also performed with $\gamma$-rays of the same energy to compare and contrast the ionization tracks obtained with both types of particle. Intrinsic properties such as the mean energy per electron-hole pair, Fano factor, maximum theoretical light yield, and spatial distributions of electron-hole pairs were computed for both $\alpha$-particles and $\gamma$-rays. $\alpha$-particles created cylindrical tracks that were initially aligned with the incident direction and with initial radii of a few nanometers, whereas $\gamma$-rays showed significant scattering, resulting in probability distributions with lower intensities and much greater radial extents.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
NASA NTRS1985

Damage initiation at curved free edges - Application to uniaxially loaded plates containing holes and notches

The concept which imputes initial free edge interlaminar damage to the differences in material properties among adjacent laminae, formerly applied to straight free edges, is presently extended to the case of curved free edges through interpretation in terms of differences in the shear and elongation strains among adjacent laminae. Attention is given to both material property differences and laminate strain spatial distributions at the hole edge. Since a large strain level and a small difference in material properties are found to be as damaging as a small strain and large difference, interlaminar damage will probably begin at a circumferential location other than the net section. These findings are further explored in view of a second extension, using the edges replication technique to record damage at a curved free edge. The damage recorded for uniaxially loaded plates with central circular holes and semicircular edge notches are compared with difference theory predictions.

Klang, E. C.↗
NASA NTRS1990

Structures observed on the spot radiance fields during the FIRE experiment

Three Spot images taken during the FIRE experiment on stratocumulus are analyzed. From this high resolution data detailed observations of the true cloud radiance field may be made. The structure and inhomogeneity of these radiance fields hold important implications for the radiation budget, while the fine scale structure in radiance field provides information on cloud dynamics. Wieliki and Welsh, and Parker et al., have quantified the inhomogeneities of the cumulus clouds through a careful examination of the distribution of cloud (and hole) size as functions of an effective cloud diameter and radiance threshold. Cahalan (1988) has compared for different cloud types of (stratocumulus, fair weather cumulus, convective clouds in the ITCZ) the distributions of clouds (and holes) sizes, the relation between the size and the perimeter of these clouds (and holes), and examining the possibility of scale invariance. These results are extended from LANDSAT resolution (57 m and 30 m) to the Spot resolution (10 m) resolution in the case of boundary layer clouds. Particular emphasis is placed on the statistics of zones of high and low reflectivity as a function of a threshold reflectivity.

Seze, Genevieve↗
NASA NTRS1993

Tidal disruptions by supermassive black holes - Hydrodynamic evolution of stars on a Schwarzschild background

We present a three-dimensional numerical study of tidal disruption of a main-sequence star by a supermassive black hole. The simulations include general relativistic effects which are important in this regime. We analyze stars in a marginally bound orbit around the black hole with pericentric separation of a few Schwarzschild radii. We show that during a close passage, as a result of relativistic effects analogous to the perihelion shift, the trajectories of the debris of the star fan out into a crescent-like shape centered on the black hole. We also discuss the increase of the central density of the star as it approaches pericentric distance, the fraction of the debris accreted by the hole, its accretion rate, the distribution of debris orbits bound to the hole, and the velocity of unbound ejected material. We compare these results with the disruption of the star by a Newtonian point mass.

Laguna, Pablo↗
DOE OSTI2023

Time variability of ultra fast BAL outflows using SALT: C IV equivalent width analysis

We study the time variability (over ≤7.3 yr) of ultra fast outflows (UFOs) detected in a sample of 64 C IV broad absorption line (BAL) quasars (with 80 distinct BAL components) monitored using the Southern African Large Telescope. By comparing the properties of the quasar in our sample with those of a control sample of non-BAL quasars, we show that the distributions of black hole mass are different and the bolometric luminosities and optical photometric variations of UFO BAL quasars are slightly smaller compared to that of non-BAL quasars. The detection fraction of C IV equivalent width (W) variability (∼95 per cent), the fractional variability amplitude $\left(\frac{\Delta W}{W}\right)$ and the fraction of ‘highly variable’ BAL (i.e. $\big|$$\frac{\Delta W}{W}$$\big|$ > 0.67) components (∼33 per cent) are higher in our sample compared to the general BAL population. The scatter in $\frac{\Delta W}{W}$ and the fraction of ‘highly variable’ BALs increase with the time-scale probed. The $\frac{\Delta W}{W}$ distribution is asymmetric at large time scales. We attribute this to the BAL strengthening time-scales being shorter than the weakening time-scales. The BAL variability amplitude correlates strongly with the BAL properties compared to the quasar properties. BALs with low W, high-velocity, shallow profiles, and low-velocity width tend to show more variability. When multiple BAL components are present, a correlated variability is seen between low- and high-velocity components with the latter showing a larger amplitude variations. We find an anticorrelation between the fractional variations in the continuum flux and W. While this suggests photoionization induced variability, the scatter in continuum flux is much smaller than that of W.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1977

Physical properties of a polar coronal hole from 2 to 5 solar radii

Observations with a white-light coronagraph aboard Skylab are used to determine the boundaries of a coronal hole in the northern polar region and the three-dimensional density structure within the hole between heights of 2 and 5 solar radii. The boundary of the hole is found to be essentially axisymmetric about the polar axis, nearly radial from 3 to 6 solar radii, and located near 25 deg latitude at these heights. The radiances arising from the hole are interpreted as resulting from an axisymmetric density distribution whose logarithmic radial gradient is independent of position within the hole and whose magnitude increases with angular distance away from the hole's axis. The velocity distribution within the hole is obtained from the continuity equation by assuming that the particle flux flowing outward in the hole is similar to that measured for high-speed solar-wind streams at 1 AU, and it is shown that the transition from subsonic to supersonic flow occurs between 2.2 and 3 solar radii.

Munro, R. H.↗
NASA NTRS1975

On the ionization of the intercloud medium by runaway O-B stars

H II regions around seven high-velocity stars of type O5 to B1 (lambda Cep, xi Per, 68 Cyg, alpha Cam, AE Aur, zeta Oph, mu Col) are investigated assuming 'on-the-spot' reabsorption of the diffuse UV and time-dependent cooling and recombination behind the stars. Ratios of column densities integrated through the H II regions are obtained for stationary and moving stars, and the ionization structure is calculated for an H II region around a runaway star moving perpendicular to the galactic plane. The total volume ionized is found to be practically independent of the star's velocity. Global properties of the intercloud medium are examined; it is found that the presence of clouds may reduce the volume ionized by as much as a factor of 7 and that as much as 30% of the total ionizing radiation from early-type stars may leak out of the galaxy. Copernicus satellite observations are shown to be consistent with lines of sight crossing only the H II regions around the observed stars and a neutral intercloud medium as well as with the existence of a 'hole' in the distribution of O-B5 stars in the vicinity of the sun.

Thuan, T. X.↗
NASA NTRS1981

Use of two-dimensional transmission photoelastic models to study stresses in double-lap bolted joints

The stress distribution in two hole connectors in a double lap joint configuration was studied. The following steps are described: (1) fabrication of photoelastic models of double lap double hole joints designed to determine the stresses in the inner lap; (2) assessment of the effects of joint geometry on the stresses in the inner lap; and (3) quantification of differences in the stresses near the two holes. The two holes were on the centerline of the joint and the joints were loaded in tension, parallel to the centerline. Acrylic slip fit pins through the holes served as fasteners. Two dimensional transmission photoelastic models were fabricated by using transparent acrylic outer laps and a photoelastic model material for the inner laps. It is concluded that the photoelastic fringe patterns which are visible when the models are loaded are due almost entirely to stresses in the inner lap.

Hyer, M. W.↗
NASA NTRS1989

X ray emission from relativistic jets in AGNs and statistical implications

Calculations of the Compton scattering interaction between an ultrarelativistic jet and a thermal radiation field, in an Active Galactic Nuclei (AGN), are presented. This process can be effective in decelerating ultrarelativistic jets that are accelerated by electromagnetic or hydromagnetic forces closer in to the central black hole. A narrow distribution of terminal Lorentz factors gamma sub infinity, consistent with the values inferred in superluminal radio sources, arises naturally in this model. The hard X-ray component detected in the spectra of 3C273 and several BL Lac objects may be due to the inverse Compton radiation produced in the course of the initial deceleration of their relativistic jets. The requirement that the luminosity of the hard X-ray component must exceed the total power in the associated jet is considered.

Melia, Fulvio↗
NASA NTRS1994

Coronagraphic observations and analyses of the ultraviolet solar corona

This status report for the period 1 October 1992 to 30 September 1994 covers the final preparation and first observations with the Spartan Ultraviolet Coronal Spectrometer on Spartan 201-1, and the preparation and second flight for Spartan 201-2. Both flights were fully successful and resulted in high quality spectroscopic observations of the extended solar corona out to 3.5 solar radii from Sun-center. The primary focus of this report is the results from Spartan 201-1. There is also a brief description of the evaluation of the quick look data from the second flight. Highlights from the first flight include a discovery that the proton velocity distribution in coronal holes is complex and consists of a central core with elevated high velocity wings compared to a Gaussian shape.

Kohl, John L.↗
NASA NTRS2003

The Constellation-X Observatory

The Constellation X-ray mission will revolutionize X-ray spectroscopy and will provide a key component of NASA's '!Beyond Einstein" program. Over the past 35 years, X-ray astronomy has grown from infancy to near-maturity and is now an indispensable astrophysical tool. Constellation-X will transform this field from the exploratory spectroscopic era of Chandra and XMM to an era of fully comprehensive spectroscopic studies. The mission will consist of four 1.6-meter X-ray telescopes orbiting the Earth/Sun system. By providing a factor of 100 increase in throughput over previous missions, as well as high spectral resolution and a broad energy bandpass, Constellation-X will obtain high quality spectra for all classes of X-ray sources over a wide range of luminosity and redshift. It will study the warping of space and time near black holes, determine the distribution of ordinary matter, dark matter and dark energy, and probe detailed physical processes that occur at temperatures, densities and pressures far beyond those achievable in Earth-bound laboratories.

Weaver, Kimberly↗
NASA NTRS2011

Laser Frequency Stabilization

Laser ranging and interferometry are essential technologies allowing for many astounding new spacebased missions such as the Laser Interferometer Space Antenna (LISA) to measure gravitational radiation emitted from distant super massive black hole mergers or distributed aperture telescopes with unprecedented angular resolution in the NIR or visible regime. The requirements on laser frequency noise depend on the residual motion and the distances between the spacecraft forming the interferometer. The intrinsic frequency stability of commercial lasers is several orders of magnitude above these requirements. Therefore, it is necessary for lasers to be stabilized to an ultrastable frequency reference so that they can be used to sense and control distances between spacecraft. Various optical frequency references and frequency stabilization schemes are considered and investigated for the applicability and usefulness for space-based interferometry missions.

Donelan, Darsa↗
NASA NTRS2022

Constraining Global Coronal Models with Multiple Independent Observables

Global coronal models seek to produce an accurate physical representation of the Sun's atmosphere that can be used, for example, to drive space-weather models. Assessing their accuracy is a complex task, and there are multiple observational pathways to provide constraints and tune model parameters. Here, we combine several such independent constraints, defining a model-agnostic framework for standardized comparison. We require models to predict the distribution of coronal holes at the photosphere, and neutral line topology at the model's outer boundary. We compare these predictions to extreme-ultraviolet (EUV) observations of coronal hole locations, white-light Carrington maps of the streamer belt, and the magnetic sector structure measured in situ by Parker Solar Probe and 1 au spacecraft. We study these metrics for potential field source surface (PFSS) models as a function of source surface height and magnetogram choice, as well as comparing to the more physical Wang–Sheeley–Arge (WSA) and the Magnetohydrodynamic Algorithm outside a Sphere (MAS) models. We find that simultaneous optimization of PFSS models to all three metrics is not currently possible, implying a trade-off between the quality of representation of coronal holes and streamer belt topology. WSA and MAS results show the additional physics that they include address this by flattening the streamer belt while maintaining coronal hole sizes, with MAS also improving coronal hole representation relative to WSA. We conclude that this framework is highly useful for inter- and intra-model comparisons. Integral to the framework is the standardization of observables required of each model, evaluating different model aspects.

S. T. Badman↗
NASA NTRS1950

Stress and strain concentration at a circular hole in an infinite plate

The theory of elasticity shows that the maximum stress at a circular hole in an infinite plate in tension is three times the applied stress when the material remains elastic. The effect of plasticity of the material is to lower this ratio. This paper considers the theoretical problem of the stress distribution in an infinitely large sheet with a circular hole for the general case where the material may have any stress-strain curve. The plate is assumed to be under uniform tension at a large distance from the hole. The material is taken to be isotropic and incompressible. (author)

THEORIES - ELASTICITY↗
NASA NTRS1997

Spectroscopic observations of the extended corona during the SOHO whole sun month

The spatial distribution of plasma parameters in the extended corona, derived from the ultraviolet coronagraph spectrometer (UVCS) onboard the Solar and Heliospheric Observatory (SOHO), was investigated. The observations were carried out during the SOHO whole month campaign. Daily coronal scans in the H I Lyman alpha and O VI lambda-lambda 1032 A and 1037 A were used. Maps of outflow velocities of O(5+), based on Doppler dimming of the O VI lines, are discussed. The velocity distribution widths of O(5+) are shown to be a clear signature of coronal holes while the velocity distributions for H(0) show a much smaller effect. The possible physical explanations for some of the observed features are discussed.

Strachan, L.↗
NASA NTRS1994

Generation of electrostatic waves as a consequence of chaotic ion acceleration in the neutral sheet

The stability of ion distributions with velocity space holes caused by chaotic ion acceleration in the vicinity of the field reversal region in the Earth's magnetotail is investigated. It is shown that such distributions are unstable to electrostatic waves with wave vector directed along the Sun-Earth line. The solution of the quasi-linear equation shows that the saturation of the instability occurs due to velocity space trapping of the low-energy background ions and results in a flattening of the reduced ion distribution function in the region of the original velocity space hole. The energy level of the excited waves in the vicinity of the Earth's midplane is estimated as a function of the initial size of the empty velocity space region.

Burinskaya, T.↗