Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “HELICAL FLOW”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

Numerical analysis of tangential slot blowing on a generic chined forebody

A numerical study is performed to investigate the effects of tangential slot blowing on a generic chined forebody. The Reynolds-averaged, thin-layer, Navier-Stokes equations are solved to obtain the high-angle-of-attack viscous flow field about a generic chined forebody. Tangential slot blowing is investigated as a means of forebody flow control to generate side force and yawing moment on the forebody. The effects of jet mass flow ratios, angle of attack, and blowing slot location in the axial and circumferential directions are studied. The computed results are compared with available wind tunnel experimental data. The solutions with and without blowing are also analyzed using helicity density contours, surface flow patterns, and off-surface instantaneous streamlines. The results of this analysis provide details of the flow field about the generic chined forebody, as well as show that tangential slot blowing can be used as a means of forebody flow control to generate side force and yawing moment.

Agosta, Roxana M.↗
NASA NTRS2003

The Magnetic Helicity Budget of Solar Active Regions and Coronal Mass Ejections

We compute the magnetic helicity injected by transient photospheric horizontal flows in six solar active regions associated with halo coronal mass ejections (CMEs) that produced major geomagnetic storms and magnetic clouds (MCs) at 1 AU. The velocities are computed using the local correlation tracking (LCT) method. Our computations cover time intervals of 1 10-150 hr, and in four active regions the accumulated helicities due to transient flows are factors of 8-12 larger than the accumulated helicities due to differential rotation. As was first pointed out by DCmoulin and Berger, we suggest that the helicity computed with the LCT method yields not only the helicity injected from shearing motions but also the helicity coming from flux emergence. We compare the computed helicities injected into the corona with the helicities carried away by the CMEs using the MC helicity computations as proxies to the CME helicities. If we assume that the length of the MC flux tubes is I = 2 AU, then the total helicities injected into the corona are a factor of 2.94 lower than the total CME helicities. If we use the values of 1 determined by the condition for the initiation of the kink instability in the coronal flux rope or I = 0.5 AU then the total CME helicities and the total helicities injected into the corona are broadly consistent. Our study, at least partially, clears up some of the discrepancies in the helicity budget of active regions because the discrepancies appearing in our paper are much smaller than the ones reported in previous studies. However, they point out the uncertainties in the MC/CME helicity calculations and also the limitations of the LCT method, which underestimates the computed helicities.

Nindos, A.↗
DOE OSTI2026

Monte Carlo Event Generation with Continuous Normalizing Flows

We apply continuous normalizing flows trained with the flow matching method to the problem of phase-space sampling in Monte Carlo event generation for high-energy collider physics. Focusing on lepton-pair and top-quark pair production with multiple jets, the two computationally most expensive processes at the Large Hadron Collider, we train helicity-conditioned continuous normalizing flows to remap the random numbers used in matrix element evaluation. Compared to standard methods, we achieve unweighting efficiency improvements by factors of up to 184 and 25 for the two processes at their respective highest jet number, at the cost of an increased evaluation time. When combining the advantages of continuous normalizing flows with the fast evaluation times of coupling-layer-based flows, using the RegFlow approach, we find parton-level unweighted event generation walltime gains of about a factor of 10 at the highest jet numbers. These substantial gains highlight the promise of samplers based on machine learning for next-generation collider experiments.

Bothmann, Enrico [CERN; Gottingen U.] (ORCID:00000↗
NASA NTRS1988

Vortex Suppressors Reduce Probe Vibrations

Lightweight addition to probe reduces cyclical stress aerodynamically. Life expectancy of instrumentation probe for high-speed flow increased by addition of helical strakes to cylindrical shield surrounding probe. Strakes disrupt vortex shedding normally occuring in fast flows around cylindrical body.

Hill, Arthur J.↗
DOE OSTI2024

Supercell precipitation contribution to the United States hydroclimate

Abstract This research seeks to understand simulated supercell precipitation characteristics across the conterminous United States (CONUS) using high‐resolution, convection‐permitting, dynamically downscaled simulations for three 15‐year epochs. Epochs include a historical end‐of‐20th‐century period (1990–2005) and two end‐of‐21st‐century (2085–2100) scenarios for intermediate and pessimistic greenhouse gas concentration trajectories. Simulated updraft helicity, which measures the corkscrew flow within a storm's updraft, is used as a proxy for supercells. An algorithm tracks and catalogues updraft helicity swaths that, when buffered, are used to acquire simulated precipitation from supercells. The historical epoch provides a baseline climatology of supercell precipitation for a contemporary climate, which is then compared against the two future epochs to assess how supercell precipitation may change during the 21st century. Despite their relatively small size, supercells provide critical precipitation to the Wheat and Corn Belts, large expanses of CONUS pasture and rangeland, regional aquifers and several large river basins. Many areas in the central CONUS receive upwards of 3%–6% of their annual and 5%–8% of their warm‐season precipitation from these storms. Results suggest that precipitation contribution from supercells will decrease in the future across most of the High Plains and Central and Northern Great Plains with robust increases likely across the south‐central and Southeast regions. Supercell precipitation rates are expected to increase for large portions of the CONUS by the end‐of‐the‐21st‐century, suggesting a growing threat for flash floods from these storms as they become more efficient precipitation producers. This research provides an initial perspective on the magnitude of supercell precipitation and potential changes to this important hydrologic input to assist water‐sensitive industries, private and public insurance markets, agriculture entities, as well as inform plans to mitigate and build resilience to rapid environmental and societal change.

Meteorology & Atmospheric Sciences↗
DOE OSTI2021

Global gyrokinetic simulation with kinetic electron for collisionless damping of zonal flow in stellarators

Global gyrokinetic simulations with kinetic electrons for collisionless damping of zonal flows in LHD and W7-X stellarators show that the helical components of the equilibrium magnetic field responsible for helically trapped particles have significant impacts on zonal flow. Kinetic electrons reduce zonal flow residue and increase the frequency of low frequency oscillation (LFO). Here, the LFO is induced by dominant helical harmonics of magnetic field strength. Furthermore, linear toroidal coupling of multiple toroidal n-harmonics barely affects the zonal flows, but can generate long wavelength toroidal harmonics with the same toroidal number as the helical magnetic field.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1989

Overview of the Center for Advanced Space Propulsion

The mission of the Center for Advanced Space Propulsion (CASP), a Center for the Commercial Development of Space (CCDS), is to strengthen U.S. competitiveness in space technology, foster cooperative research with industry and government, assist industry in developing commercial products and services, and perform research in advanced space propulsion. Current areas of focus are (1) advanced chemical propulsion, including high area ratio nozzle performance, variable thrust engine performance, and spray combustion stability; (2) artificial intelligence propulsion applications, including health monitoring of rocket engines, fault pattern detection and diagnosis, and intelligent hypertext applications; (3) microgravity fluid management, including liquid storage and transfer, a subscale orbital fluid transfer experiment, and helical, two-phase flow; (4) electric propulsion, including magnetic annular arc thruster, ion thrustor, and electrostatic plasma accelerator; and (5) laser materials processing.

George W Garrison↗
NASA NTRS2003

Helicity in supercritical temporal mixing layers

Databases of transitional states obtained from Direct Numerical Simulations (DNS) of temporal, supercritical mixing layers for two species systems, 02/H2 and C7Hle/N2, are analyzed to elucidate species-specific turbulence aspects.

helicity supercritical flows↗
DOE OSTI2021

Direct measurements of the 3D plasma velocity in single-helical-axis RFP plasmas

The first local velocity measurements of helical equilibrium plasmas in the Reversed Field Pinch (RFP) Single Helical Axis (SHAx) state using a Charge Exchange Recombination Spectroscopy (CHERS) diagnostic are presented. Measurements show strong axisymmetric and non-axisymmetric flow, with n ¼ 5 components of flow related to the ðm; nÞ¼ð1; 5Þ dominant magnetic mode on the order of the axisymmetric flow in certain regions of the plasma, as well as significant n > 5 flow. Flow measurements are compared with NIMROD simulations of visco-resistive, single-fluid MHD in toroidal and cylindrical geometries with limited axial periodicity. Both measurements and the simulation with toroidal geometry show stronger inboard flows relative to the outboard flows, which is attributed to the toroidal geometry of the device. In the experiment, the n ¼ 5 component of flow is phase shifted from the reconnection-like flow pattern observed in the single-fluid simulations, possibly due to decoupling of the ion and electron fluids over much of the plasma. Finally, the strength of the helical angular flow shear relative to the critical shear necessary to disrupt nonlinear coupling between tearing modes is calculated around the helical magnetic axis. The shear in the measured flow is on the order of the theoretical critical threshold needed to nonlinearly decouple modes, but the measurement uncertainty in the gradient of the flow is large.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1990

A helically distorted MHD flux rope model

A flux rope model is proposed which has a variable degree of helical distortion from axisymmetry. The basis for this suggestion is a series of numerical and analytical investigations of magnetohydrodynamic states which result when an axial electric current is directed down on dc magnetic field. The helically distorted states involve a flow velocity and seem to be favored because of their lower rate of energy dissipation. Emphasis is on the magnetometer and particle energy analyzer traces that might be characteristic of such flux ropes. It is shown that even a fractionally small helical distortion may considerably alter the traces in minimum-variance coordinates. In short, what may be fairly common MHD processes can render a flux rope almost unrecognizable under standard diagnostics, even if the departures from axisymmetry are not great.

Theobald, Michael L.↗
DOE OSTI2020

Diabatic visualization shows effects of micro-fins on evaporation of R410A: Smooth, axial micro-fin, and helical micro-fin tubes

A novel approach to visualize the flow boiling inside a clear micro-fin tube under diabatic conditions is presented. Transparent smooth, axial micro-fin, and helical micro-fin tubes are made by 3D printing. The 3D printed tube is placed inside a glass tube and heated by the transparent secondary fluid flowing between the two tubes for providing the evaporation conditions and transparency. R410A flow boiling and the flow patterns in the three geometries captured with a high speed camera are compared. The experimental results show that micro-fin geometry influences flow behavior. Bubbles are mainly generated in the groove region due to a higher superheat than the fin region. Some of the liquid refrigerant is trapped in the grooves of the upper part of the micro-fin tube when the slug flow is present, and bubbles are generated in this thin liquid layer. In addition, the bubbles in the helical micro-fin tube are easier to merge because of the obstacle of the fin geometry for the bubble flowing path. As the two bubble merge, the conversion of surface free energy causes the bubble to travel with a higher velocity.

3D printed↗
NASA NTRS1990

Galerkin approximations for dissipative magnetohydrodynamics

A Galerkin approximation scheme is proposed for voltage-driven, dissipative magnetohydrodynamics. The trial functions are exact eigenfunctions of the linearized continuum equations and represent helical deformations of the axisymmetric, zero-flow, driven steady state. The lowest nontrivial truncation is explored: one axisymmetric trial function and one helical trial function each for the magnetic and velocity fields. The system resembles the Lorenz approximation to Benard convection, but in the region of believed applicability, its dynamical behavior is rather different, including relaxation to a helically deformed state similar to those that have emerged in the much higher resolution computations of Dahlburg et al.

Chen, Hudong↗
DOE OSTI2023

Magnetic field evolution and reconnection in low resistivity plasmas

The mathematics and physics of each of the three aspects of magnetic field evolution—topology, energy, and helicity—are remarkably simple and clear. When the resistivity η is small compared to an imposed evolution, a/v , timescale, which means $R$ m ≡ μ 0 va/η $\gg$ 1, magnetic field-line chaos dominates the evolution of field-line topology in three-dimensional systems. Chaos has no direct role in the dissipation of energy. A large current density, j η ≡ vB/η, is required for energy dissipation to be on a comparable timescale to the topological evolution. Nevertheless, chaos plus Alfvén wave damping explain why both timescales tend to be approximately an order of magnitude longer than the evolution timescale a/v. Magnetic helicity is injected onto tubes of field lines when boundary flows have vorticity. Chaos can spread but not destroy magnetic helicity. Resistivity has a negligible effect on helicity accumulation when $R$ m $\gg$ 1. Helicity accumulates within a tube of field lines until the tube erupts and moves far from its original location.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1985

Convective influence on the stability of a cylindrical solid-liquid interface

Experiments in which a long vertical, heated wire is surrounded by concentric annuli of a melt and its crystalline solid show that the convection state changes from a stable unicell surrounded by a stationary cylindrical solid-liquid interface, to a complex time-dependent flow surrounded by a rotating, helical solid-liquid interface. This transition occurs at a Grashof number of approximately 150, which is an order of magnitude less than the critical Grashof number calculated for a liquid annulus surrounded by rigid walls. A linear stability analysis has been carried out for an infinitely tall vertical annulus. When the deformable nature of the crystal-melt interface is taken into account in the boundary conditions, two new modes of instability arise. The most dangerous mode is asymmetrical and corresponds to helical waves travelling vertically upwards. The critical Grashof number and the scaling properties of the eigenstate agree with experiments. The results clearly demonstrate the coupling of convection with crystal-melt interfacial instabilities.

Fang, Q. T.↗
NASA NTRS1987

On helicity fluctuations and the energy cascade in turbulence

Recent conjectures concerning the correlation between regions of high local helicity and low dissipation are examined from a rigorous theoretical standpoint based on the Navier-Stokes equations. It is proven that only the solenoidal part of the Lamb vector omega x u (which is directly tied to the nonlocal convection and stretching of vortex lines) contributes to the energy cascade in turbulence. Consequently, it is shown that regions of low dissipation can be associated with either low or high helicity, a result which disproves earlier speculations concerning this direct connection between helicity and the energy cascade. Some brief examples are given along with a discussion of the consistency of these results with the most recent computations of helicity fluctuations in incompressible turbulent flows.

Speziale, Charles G.↗
NASA NTRS1989

On helicity fluctuations and the energy cascade in turbulence

Recent conjectures concerning the correlation between regions of high local helicity and low dissipation are examined from a rigorous theoretical standpoint based on the Navier-Stokes equations. It is proven that only the solenoidal part of the Lamb vector omega x u (which is directly tied to the nonlocal convection and stretching of vortex lines) contributes to the energy cascade in turbulence. Consequently, it is shown that regions of low dissipation can be associated with either low or high helicity, a result which disproves earlier speculations concerning this direct connection between helicity and the energy cascade. Some brief examples are given along with a discussion of the consistency of these results with the most recent computations of helicity fluctuations in incompressible turbulent flows.

Speziale, Charles G.↗
NASA NTRS1994

On the transition towards slow manifold in shallow-water and 3D Euler equations in a rotating frame

The long-time, asymptotic state of rotating homogeneous shallow-water equations is investigated. Our analysis is based on long-time averaged rotating shallow-water equations describing interactions of large-scale, horizontal, two-dimensional motions with surface inertial-gravity waves field for a shallow, uniformly rotating fluid layer. These equations are obtained in two steps: first by introducing a Poincare/Kelvin linear propagator directly into classical shallow-water equations, then by averaging. The averaged equations describe interaction of wave fields with large-scale motions on time scales long compared to the time scale 1/f(sub o) introduced by rotation (f(sub o)/2-angular velocity of background rotation). The present analysis is similar to the one presented by Waleffe (1991) for 3D Euler equations in a rotating frame. However, since three-wave interactions in rotating shallow-water equations are forbidden, the final equations describing the asymptotic state are simplified considerably. Special emphasis is given to a new conservation law found in the asymptotic state and decoupling of the dynamics of the divergence free part of the velocity field. The possible rising of a decoupled dynamics in the asymptotic state is also investigated for homogeneous turbulence subjected to a background rotation. In our analysis we use long-time expansion, where the velocity field is decomposed into the 'slow manifold' part (the manifold which is unaffected by the linear 'rapid' effects of rotation or the inertial waves) and a formal 3D disturbance. We derive the physical space version of the long-time averaged equations and consider an invariant, basis-free derivation. This formulation can be used to generalize Waleffe's (1991) helical decomposition to viscous inhomogeneous flows (e.g. problems in cylindrical geometry with no-slip boundary conditions on the cylinder surface and homogeneous in the vertical direction).

Mahalov, A.↗