SEARCH · Engineering Papers

Results for “HARVESTING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

All sources NASA NTRS DOE OSTI

DOE OSTI2020

Cut–and–chip harvester material capacity and fuel performance on commercial-scale willow fields for varying ground and crop conditions

Shrub willow (Salix spp.) is capable of producing commercially attractive amounts of biomass in short rotations, but harvesting costs and logistics remain a concern. There is a particular need for information about harvesting operations on larger, commercial short–rotation woody crop systems. Another recent issue on commercial fields in northern New York is commercial growers conducting harvests during the growing season rather than the recommended dormant season when fields may be too wet to harvest. This study evaluated and modeled the in–field performance of a cut–and–chip harvester for almost 700 wagonloads of chips operating in commercial willow fields in a wider array of crop and field conditions than have been previously reported. Analysis indicated that the time of harvest (leaf–on or leaf–off) and whether site conditions were wet or dry affected the harvester's material capacity. Mean material capacity was greatest for leaf–off, dry conditions (71.8 Mg/hr) and lowest for leaf–on harvests, which were similar for wet (30.4 Mg/hr) and dry conditions (29.7 Mg/hr). Mean crop specific fuel consumption ranged between 1.3 and 3.3 L/Mg, but can get considerably higher for standing biomasses below 40 Mg/ha. Wet ground conditions and leaf–on harvests tend to decrease material capacity and increase fuel consumption as the harvester has to divert power to forward movement and material processing. Relationships for material capacity and fuel consumption based on standing biomass, time of harvest and ground conditions will be essential for evaluating and modeling the economic and environmental impacts of commercial–scale willow operations.

09 BIOMASS FUELS↗

DOE OSTI2023

Co-Harvest and Anaerobic Co-Storage of Corn Grain and Stover as Biomass Feedstocks

This research investigated the utility of co-harvesting and anaerobic co-storage of corn grain and stover to positively influence their physical and chemical characteristics as a biomass feedstock. Corn grain and stover were harvested in 2019 and 2020 with a self-propelled forage harvester. Stover yield, moisture content, and composition were altered by the harvest date, stubble height, and header configuration. Harvest date had the utility of varying the stover moisture content (p < 0.001) from 42.3% to 53.5% (w.b.) and 43.1% to 53.9% (w.b.) for the 2019 and 2020 harvest years, respectively. Stubble height was also utilized to vary stover moisture content. A negative linear relationship was established between stubble height and stover moisture content for the early (R2 = 0.76) and late harvest (R2 = 0.91) dates for both years. Stover yield also showed a negative linear relationship (R2 = 0.76) with stubble height over both years. Regardless of the stubble height, the row-crop header collected more stover (p < 0.001) than the ear-snapper header. In 2020, harvested stover ranged from 5.0 to 10.5 Mg ha-1, with ha-1 representing 41% to 85% of the total available stover. In both years, stover ash content was less than 64 g kg-1. Material stored in pilot-scale silos (19 L) was well conserved during anaerobic storage, with average DM losses of 4.8% and 3.4% in 2019 and 2020, respectively. Grain moisture content averaged 23.6% (w.b.) at harvest, and 31.0% (w.b.) after storage as moisture migrated from the moist stover to the drier grain. Harvesting whole-plant corn with a forage harvester had the unwanted effect of reducing the particle size of the grain fraction, which would complicate downstream utilization. However, reducing the harvester cutterhead speed increased the fraction of intact kernels from 47% to 85% by mass. The studied system was a viable alternative to conventional corn grain and stover systems for producing feedstocks for biochemical conversion.

09 BIOMASS FUELS↗

NASA NTRS1996

Varying plant density and harvest time to optimize cowpea leaf yield and nutrient content

Plant density and harvest time were manipulated to optimize vegetative (foliar) productivity of cowpea [Vigna unguiculata (L.) Walp.] canopies for future dietary use in controlled ecological life-support systems as vegetables or salad greens. Productivity was measured as total shoot and edible dry weights (DW), edible yield rate [(EYR) grams DW per square meter per day], shoot harvest index [(SHI) grams DW per edible gram DW total shoot], and yield-efficiency rate [(YER) grams DW edible per square meter per day per grams DW nonedible]. Cowpeas were grown in a greenhouse for leaf-only harvest at 14, 28, 42, 56, 84, or 99 plants/m2 and were harvested 20, 30, 40, or 50 days after planting (DAP). Shoot and edible dry weights increased as plant density and time to harvest increased. A maximum of 1189 g shoot DW/m2 and 594 g edible DW/m2 were achieved at an estimated plant density of 85 plants/m2 and harvest 50 DAP. EYR also increased as plant density and time to harvest increased. An EYR of 11 g m-2 day-1 was predicted to occur at 86 plants/m2 and harvest 50 DAP. SHI and YER were not affected by plant density. However, the highest values of SHI (64%) and YER (1.3 g m-2 day-1 g-1) were attained when cowpeas were harvested 20 DAP. The average fat and ash contents [dry-weight basis (dwb)] of harvested leaves remained constant regardless of harvest time. Average protein content increased from 25% DW at 30 DAP to 45% DW at 50 DAP. Carbohydrate content declined from 50% DW at 30 DAP to 45% DW at 50 DAP. Total dietary fiber content (dwb) of the leaves increased from 19% to 26% as time to harvest increased from 20 to 50 days.

NASA Discipline Life Support Systems↗

DOE OSTI2018

Biomass Yield of Warm-Season Grasses Affected by Nitrogen and Harvest Management

Native perennial warm-season grasses (NPWSG) have drawn interest as bioenergy feedstocks due to their high productivity with minimal amounts of inputs under a wide range of environments. Nitrogen fertility and harvest timing are critical management practices when optimizing biomass yield of NPWSG. Our objective was to quantify the impact of N fertilizer rate and timing in combination with harvest timing and frequency on NPWSG yield. Research was conducted in 2014 and 2015 on four field-plot locations in Missouri. The experiment was a split-plot design with three replications where N rate and harvest timing were the main and sub-plot treatments, respectively. Nitrogen rates were 0, 34, 67, and 101 kg N ha –1 with two application timings, all early spring and split N (early spring and following first harvest). Harvest timing included two single (September and November) and two double harvests (June followed by September or November) per year. Delaying harvest until November increased yield across sites. November harvest and N rates ≥67 kg ha –1 improved NPWSG biomass yields. Although N fertilization improved yield, partial factor productivity (PFP) of applied N did not increase with annual N rates >34 kg ha –1 . Fertilization at 67 kg ha –1 yr –1 provides an opportunity to maintain a balance between yield and N efficiency. Furthermore, these results demonstrated that N fertilization and harvest management of NPWSG were not always independent, and therefore these practices should be simultaneously considered. For example, early-season harvesting suppressed response to N when the second harvest was not delayed until after frost.

Weerasekara, Chamara S.↗

NASA NTRS1996

Identifying yield-optimizing environments for two cowpea breeding lines by manipulating photoperiod and harvest scenario

Photoperiod and harvest scenario of cowpea (Vigna unguiculata L. Walp) canopies were manipulated to optimize productivity for use in future controlled ecological life-support systems. Productivity was measured by edible yield rate (EYR:g m-2 day-1), shoot harvest index (SHI: g edible biomass [g total shoot dry weight]), and yield-efficiency rate (YER:g edible biomass m-2 day-1 per[g nonedible shoot dry weight]). Breeding lines 'IT84S-2246' (S-2246) and "IT82D-889' (D-889) were grown in a greenhouse under 8-, 12-, or 24-h photoperiods. S-2246 was short-day and D-889 was day-neutral for flowering. Under each photoperiod, cowpeas were harvested either for leaves only, seeds only, or leaves plus seeds (mixed harvest). Photoperiod did not affect EYR of either breeding line for any harvest scenario tested. Averaged over both breeding lines, seed harvest gave the highest EYR at 6.7 g m-2 day-1. The highest SHI (65%) and YER (94 mg m-2 day-1 g-1) were achieved for leaf-only harvest of D-889 under an 8-h photoperiod. For leaf-only harvest of S-2246, both SHI and YER increased with increasing photoperiod, but declined for seed-only and mixed harvests. However, photoperiod had no effect on SHI or YER for D-889 for any harvest scenario. A second experiment utilized the short-day cowpea breeding line 'IT89KD-288' (D-288) and the day-neutral breeding line 'IT87D-941-1' (D-941) to compare yield parameters using photoperiod extension under differing lamp types. This experiment confirmed the photoperiod responses of D-889 and S-2246 to a mixed-harvest scenario and indicated that daylength extension with higher irradiance from high pressure sodium lamps further suppressed EYR, SHI, and YER of the short-day breeding line D-288.

Non-NASA Center↗

DOE OSTI2011

A Five-Year Assessment of Corn Stover Harvest in Central Iowa, USA

Sustainable feedstock harvest strategies are needed to ensure bioenergy production does not irreversibly degrade soil resources. The objective for this study was to document corn (Zea mays L.) grain and stover fraction yields, plant nutrient removal and replacement costs, feedstock quality, soil-test changes, and soil quality indicator response to four stover harvest strategies for continuous corn and a corn-soybean [Glycine max. (L.) Merr.] rotation. The treatments included collecting (1) all standing plant material above a stubble height of 10 cm (whole plant), (2) the upper-half by height (ear shank upward), (3) the lower-half by height (from the 10 cm stubble height to just below the earshank), or (4) no removal. Collectable biomass from Treatment 2 averaged 3.9 ({+-}0.8) Mg ha{sup -1} for continuous corn (2005 through 2009), and 4.8 ({+-}0.4) Mg ha{sup -1} for the rotated corn (2005, 2007, and 2009). Compared to harvesting only the grain, collecting stover increased the average N-P-K removal by 29, 3 and 34 kg ha{sup -1} for continuous corn and 42, 3, and 34 kg ha{sup -1} for rotated corn, respectively. Harvesting the lower-half of the corn plant (Treatment 3) required two passes, resulted in frequent plugging of the combine, and provided a feedstock with low quality for conversion to biofuel. Therefore, Treatment 3 was replaced by a 'cobs-only' harvest starting in 2009. Structural sugars glucan and xylan accounted for up to 60% of the chemical composition, while galactan, arabinan, and mannose constituted less than 5% of the harvest fractions collected from 2005 through 2008. Soil-test data from samples collected after the first harvest (2005) revealed low to very low plant-available P and K levels which reduced soybean yield in 2006 after harvesting the whole-plant in 2005. Average continuous corn yields were 21% lower than rotated yields with no significant differences due to stover harvest. Rotated corn yields in 2009 showed some significant differences, presumably because soil-test P was again in the low range. A soil quality analysis using the Soil Management Assessment Framework (SMAF) with six indicators showed that soils at the continuous corn and rotated sites were functioning at an average of 93 and 83% of their inherent potential, respectively. With good crop management practices, including routine soil-testing, adequate fertilization, maintenance of soil organic matter, sustained soil structure, and prevention of wind, water or tillage erosion, a portion of the corn stover being produced in central Iowa, USA can be harvested in a sustainable manner.

09 BIOMASS FUELS↗

DOE OSTI2017

Harvesting biofuel grasslands has mixed effects on natural enemy communities and no effects on biocontrol services

Summary Perennial bioenergy systems, such as switchgrass and restored prairies, are alternatives to commonly used annual monocultures such as maize. Perennial systems require lower chemical input, provide greater ecosystem services such as carbon storage, greenhouse gas mitigation and support greater biodiversity of beneficial insects. However, biomass harvest will be necessary in managing these perennial systems for bioenergy production, and it is unclear how repeated harvesting might affect ecosystem services. In this study, we examined how repeated production‐scale harvesting of diverse perennial grasslands influences vegetation structure, natural enemy communities (arthropod predators and parasitoids), and natural biocontrol services in two states (Wisconsin and Michigan, USA) over multiple years. We found that repeated biomass harvest reduced litter biomass and increased bare ground cover. Some natural enemy groups, such as ground‐dwelling arthropods, decreased in abundance with harvest, whereas others such as foliar‐dwelling arthropods increased in abundance. The disparity in responses is likely due to how different taxonomic groups utilize vegetation and differences in dispersal abilities. At the community level, biomass harvest altered community composition, increased total arthropod abundance and decreased evenness but did not influence species richness, diversity or biocontrol services. Harvest effects varied with time, diminishing in strength both within the season (for total abundance and evenness), across seasons (for evenness) or were consistent throughout the duration of the study (for community composition). Greater functional redundancy and compensatory responses of the different taxonomic groups may have buffered against the potentially negative effects of harvest on biocontrol services. Synthesis and applications . Our results show that in the short‐term, repeated harvesting of perennial grasslands (when insect activity is low) consistently altered vegetation structure but had mixed effects on natural enemy communities and no discernible effects on biocontrol services. However, the long‐term effects of repeated harvesting on vegetation structure, natural enemies and other arthropod‐derived ecosystem services such as pollination and decomposition remain largely unknown.

Kim, Tania N.↗

DOE OSTI2018

Data from: Harvesting biofuel grasslands has mixed effects on natural enemy communities and no effects on biocontrol services

1.Perennial bioenergy systems, such as switchgrass and restored prairies, are alternatives to commonly used annual monocultures such as maize. Perennial systems require lower chemical input, provide greater ecosystem services such as carbon storage, greenhouse gas mitigation, and support greater biodiversity of beneficial insects. However, biomass harvest will be necessary in managing these perennial systems for bioenergy production, and it is unclear how repeated harvesting might affect ecosystem services. 2.In this study, we examined how repeated production-scale harvesting of diverse perennial grasslands influences vegetation structure, natural enemy communities (arthropod predators and parasitoids), and natural biocontrol services in two states (Wisconsin and Michigan, USA) over multiple years. 3.We found that repeated biomass harvest reduced litter biomass and increased bare ground cover. Some natural enemy groups, such as ground-dwelling arthropods, decreased in abundance with harvest whereas others, such as foliar-dwelling arthropods increased in abundance. The disparity in responses is likely due to how different taxonomic groups utilize vegetation and differences in dispersal abilities. 4.At the community level, biomass harvest altered community composition, increased total arthropod abundance, and decreased evenness but did not influence species richness, diversity, or biocontrol services. Harvest effects varied with time, diminishing in strength both within the season (for total abundance and evenness), across seasons (for evenness), or were consistent throughout the duration of the study (for community composition). Greater functional redundancy and compensatory responses of the different taxonomic groups may have buffered against the potentially negative effects of harvest on biocontrol services. 5.Synthesis and applications. Our results show that in the short-term, repeated harvesting of perennial grasslands (when insect activity is low) consistently altered vegetation structure but had mixed effects on natural enemy communities and no discernable effects on biocontrol services. However, the long-term effects of repeated harvesting on vegetation structure, natural enemies, and other arthropod-derived ecosystem services such as pollination and decomposition remain largely unknown.

09 BIOMASS FUELS↗

DOE OSTI2022

Comparative performance and technoeconomic analyses of two microalgae harvesting systems evaluated at a commercially relevant scale

Using a commercially scalable system designed for processing thousands of liters a day, here we evaluated the factors that affected the performance, energy consumption and capital/operating costs of both flocculation-based and filtration-based algal harvesting systems over a 16 month period. Coagulation efficiency was the primary driver of harvest efficiency in the flocculation-based method, while cell lysis was important for the filtration-based method. Culture (algae) age differentially influenced harvest efficiency through changes in cell fragility and stickiness. The average energy consumption of the flocculation-based method was 0.389 kWh/m 3 , while that for the filtration-based method was 4.343 kWh/m 3 . The average harvesting cost of the filtration-based method was 5.35 $\$$/m 3 , while for flocculation-based method it was 4.52 $\$$/m 3 . The concentration factor of filtration-based and flocculation-based method were 770–1086 and 407–448, respectively. For both harvesting methods, labor costs dominated and ranged from 55.84%–67.94% of total cost. Further system automation is a potential method to lower the harvesting cost. The filtration-based harvesting method could produce a better quality of algal biomass with higher concentration factors and less ash content, but needed more energy input, as compared with a flocculation-based method. This study highlights the importance of algal culture status to successful harvesting, and it also provides insight into developing more efficient harvesting technology with lower energy and capital cost.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2021

Miscanthus × giganteus Responses to Nitrogen Fertilization and Harvest Timing in Illinois, USA

Renewable energy continues to be of interest in the USA due to concerns about the long-termed availability and the environmental impact of fossil fuels. Miscanthus × giganteus is a warm-season perennial bioenergy feedstock grass that has a long growing season, is high yielding, requires limited inputs, and will likely become an important renewable energy crop in the USA. This research studied the effects of N application rates and harvest timings on yields and biomass quality of a 4-year-old stand of M. × giganteus in Urbana, IL, USA. Plots received 0, 56, 112, 156, or 224 kg N ha –1 , and harvests were conducted at five dates between August and March in the 2009, 2010, and 2011 growing seasons. Miscanthus × giganteus production increased with N applications up to 112 kg ha –1 . Harvesting biomass before senescence, August through November, produced significantly more biomass compared to harvesting biomass after senescence. However, early harvest reduced biomass yields in the following years. Here, nitrogen fertilization compensated for the yield losses, but the yield gap between early and late harvest continually increased. Harvesting M. × giganteus after senescence optimized long-term productivity, reduced the need for N fertilization, and increased carbon and ash content in the harvested biomass, while harvesting before senescence not only removes N from the plant but also reduces remobilization of other nutrients and carbohydrates in autumn.

09 BIOMASS FUELS↗

DOE OSTI2025

Investigating the Global Biogeophysical Impact of Area and Mass Based Wood Harvest in a Vegetation Demography Model

Wood harvesting alters land surface properties and energy redistribution, but there is a lack of studies estimating these changes on a global scale. We coupled a vegetation demographic model, the Functionally Assembled Terrestrial Ecosystem Simulator, with the E3SM land model to perform offline model simulation to investigate the land biogeophysical responses, including canopy coverage, leaf area index, albedo, surface roughness length, and energy fluxes, to historical wood harvest on the global scale. In this study, we found 50% less harvested carbon (C) when choosing the area-based harvest rate as driving data that has not been spatially harmonized, compared to reharmonized mass-based harvesting. By considering the uncertainty from reconstruction of historical wood harvest time series and the choice of wood harvest approach in the model, continuous wood harvest (1850–2015) results in 5%–10% of canopy coverage loss, contributing 0.5%–1% increase of albedo over disturbed land, which is much stronger than a non-demographic land surface model. Changes in energy flux from the wood harvest are negligible (<1%), but the responses of land surface properties vary (up to 30%) due to differences in model structure between the single canopy, sun-shade leaf model and vegetation demographic model.

Shu, Shijie [Lawrence Berkeley National Laboratory↗

DOE OSTI2021

Effectiveness and nonlinear characterization of vibro-impact energy harvesting absorbers in controlling base-excited systems

In this study, model derivations are carried out of a dynamical system under base excitations with a piezoelectric energy harvesting absorber as the tuned-mass-damper. Additionally, amplitude stoppers are included to the absorber in order to create a broadband resonant response, increasing the window of operational use for energy harvesting and system's control. This study is unique in the fact that the energy harvester is coupled to the source of its excitation. A nonlinear reduced-order model is developed using Euler–Lagrange principle and the Galerkin method to accurately estimate the energy harvesting absorber's displacement, harvested power, and the oscillating response of the primary structure. The nonlinear interaction of the energy harvesting absorber and the amplitude stoppers are the focus of this study, where an in-depth investigation of bifurcation points of the primary structure and energy harvesting absorber responses is performed. Due to a transfer of energy between the primary structure and the absorber, it is shown that a soft stopper with stiffness $5 \times {10^3}\,{\text{N}}\;{{\text{m}}^{ - 1}}\,$ has great control of the primary structure with 60% of the uncontrolled amplitude being reduced, as well as an increase of the harvested energy. Medium stoppers with small initial gaps size and hard stoppers do not control the primary structure and show a decrease in the energy harvesting capabilities due to the activation of the nonlinear contact-impact interactions. Finally, these stoppers also generate aperiodic regions due to the possible presence of grazing bifurcations.

36 MATERIALS SCIENCE↗

DOE OSTI2016

First Harvest Timing and Nitrogen Application Rate Effects on Chemical Composition and Ethanol Yield of Switchgrass

Switchgrass ( Panicum virgatum L.) chemical composition dynamics must be evaluated if dual‐purpose use as both forage and feedstock is to be considered. This 2‐year study, conducted at the Brown Loam Branch Experiment Station, Raymond, MS, quantified first harvest timing (HT) and nitrogen (N) rate effects on forage nutritive value, feedstock chemical composition, and ethanol yield of both primary and aftermath harvests of ‘Alamo’ switchgrass. Treatments were factorial combinations of six HT (monthly intervals from May to October) and four N application rates (0, 35.7, 71.2, and 107.1 lb/acre) in a randomized complete block design. Aftermath was harvested in November. In both years, first harvest acid detergent fiber (ADF), neutral detergent fiber (NDF), lignin, cellulose, and hemicellulose concentrations of aboveground biomass, stems, and leaves increased with HT from May to October while aftermath harvest concentrations decreased with shorter regrowth after the first harvest. Stems had greater concentrations than leaf. Crude protein (CP) and in vitro dry matter digestibility (IVDMD) decreased with plant maturity and were greatest in the leaf component. Concentrations of major sugars increased with maturity and were greatest in the most mature stand in the aftermath. Ethanol yield was greatest in the least mature stands; however, ethanol production increased with maturity, largely because of greater biomass harvested. Nitrogen rate had no effect on forage nutritive value or feedstock composition in either the primary or aftermath harvests. These results provide information that can guide potential utilization of switchgrass as forage in early season and harvesting for biofuel feedstock at the end of the season.

Seepaul, Ramdeo↗

DOE OSTI2016

Far-field Wireless Energy Harvesting for Increased Safeguards Equipment Battery Life.

Modern unattended safeguards equipment (e.g. seals) incorporates many low-power electronic circuits, which are typically powered by expensive and toxic lithium thionyl chloride (LiSOCL2) batteries. The limited life of these batteries necessitates their periodic replacement. This replacement must be performed before total battery discharge to avoid potential loss of continuity of knowledge. Thus, the effective battery capacity becomes significantly less than the actual usable capacity. Additionally, such maintenance is a radiological hazard to personnel, as well as a monetary burden to a safeguards inspectorate. Energy harvesting, a commercially available technology, could extend the operational life of batterypowered equipment to achieve significant efficiencies for safeguards deployments. Energy harvesting is the scavenging and storage of ambient energy sources, such as solar, thermal, and kinetic for use in lowpower electronic applications. While the amount of scavenged energy per unit time may be small, it most often comes from a source that will not be depleted throughout the deployment of the harvesting device. The best-known energy harvesters are solar panels and wind turbines. Recently, far-field wireless energy harvesting has become a commercially available option. Far-field wireless energy harvesting provides consistent, predictable, and un-tethered power over distances up to 50 feet. This process converts radio frequency (RF) energy, both intentionally emitted and ambient, into usable direct current (DC) power. Incorporating far-field wireless energy harvesting into safeguards equipment can significantly extend the equipment’s battery life and perhaps make it indefinite. Furthermore, additional functionality can be added to safeguards equipment without lowering its operational life expectancy. This paper explores the benefits and drawbacks of integrating far-field wireless energy harvesting into a chosen safeguards seal: the Remotely Monitored Sealing Array (RMSA). Specifically, it examines the performance of a commercially available RF harvesting system from Powercast, as well as commercial and custom antenna solutions.

25 ENERGY STORAGE↗

NASA NTRS2011

A Piezoelectric PZT Ceramic Mulitlayer Stack for Energy Harvesting Under Dynamic Forces

Piezoelectric energy harvesting transducers (PEHTs) are commonly used in motion/vibration energy scavenging devices. To date, most researchers have focused on energy harvesting at narrow bandwidths around the mechanical resonance frequency, and most piezoelectric harvesting devices reported in the literature have very low effective piezoelectric coefficient (d(sub eff)) (< 10(exp 4) pC/N). For instance, more than 80% of PEHT related papers are on transverse "31" mode cantilever beam type PEHTs (CBPEHTs) having piezoelectric coefficients of about 100 pC/N. The level of harvested electrical power for CBPEHTs is on the order of microW even at resonance mode. In order to harvest more electrical energy across broader bandwidth, high effective piezoelectric coefficient structures are needed. In this study, we investigate a "33" longitudinal mode, piezoelectric PZT ceramic multilayer stack (PZT-Stack) with high effective piezoelectric coefficient for high-performance PEHTs. The PZT-Stack is composed of 300 layers of 0.1 mm thick PZT plates, with overall dimensions of 32.4 mm X 7.0 mm X 7.0 mm. Experiments were carried out with dynamic forces in a broad bandwidth ranging from 0.5 Hz to 25 kHz. The measured results show that the effective piezoelectric coefficient of the PZT-stack is about 1 X 10(exp 5) pC/N at off-resonance frequencies and 1.39 X 10(exp 6) pC/N at resonance, which is order of magnitude larger than that of traditional PEHTs. The effective piezoelectric coefficients (d(sub eff)) do not change significantly with applied dynamic forces having root mean square (RMS) values ranging from 1 N to 40 N. In resonance mode, 231 mW of electrical power was harvested at 2479 Hz with a dynamic force of 11.6 N(sub rms), and 7.6 mW of electrical power was generated at a frequency of 2114 Hz with 1 N(sub rms) dynamic force. In off-resonance mode, an electrical power of 18.7 mW was obtained at 680 Hz with a 40 N(sub rms) dynamic force. A theoretical model of energy harvesting for the PZT-Stack is established. The modeled results matched well with experimental measurements. This study demonstrated that high effective piezoelectric coefficient structures enable PEHTs to harvest more electrical energy from mechanical vibrations or motions, suggesting an effective design for high-performance low-footprint PEHTs with potential applications in military, aerospace, and portable electronics. In addition, this study provides a route for using piezoelectric multilayer stacks for active or semi-active adaptive control to damp, harvest or transform unwanted dynamic vibrations into useful electrical energy.

Xu, Tian-Bing↗

DOE OSTI2019

Cost and profit impacts of modifying stover harvest operations to improve feedstock quality

Biomass quality attributes, and the potential tractability of those attributes, are key to a successful biomass feedstock supply chain, in addition to quantity and price. Modifying harvest operations is one potential approach to managing biomass feedstock quality for corn stover. For example, eliminating raking from stover harvest operations is proposed as an approach to reduce ash content. However, changes in the stover harvest configuration cause changes in per acre profits, per ton costs, and available supply at specified prices. Here we evaluate sensitivity of profit, cost, and supply to conversion from a three–pass to a two–pass stover harvesting configuration as a means to reduce ash content. For all simulated yields, harvest costs are 2–3 per ton cheaper for three–pass versus two–pass systems wherever residue retention coefficients are less than 0.5, and per ton costs for both systems increase dramatically where residue retention coefficients are greater than 0.7. Per acre net returns are greater under all simulated yields wherever residue sustainability retention coefficients are less than 0.6. Under these conditions, farmers lose between 13 and 49 per acre by harvesting with a two–pass rather than a three–pass system. Where competing with stover markets with less stringent quality specifications, meeting ash targets by harvesting with a two–pass system may require higher grower payments of the order of 9–25 per ton to make up for the per acre lost revenue. Here, when solving for the least–cost supply, agronomic simulations suggest about 2/3 of stover is harvested with a three–pass system.

09 BIOMASS FUELS↗

DOE OSTI2013

Experimental Analysis of a Piezoelectric Energy Harvesting System for Harmonic, Random, and Sine on Random Vibration

Formal journal article Experimental analysis of a piezoelectric energy harvesting system for harmonic, random, and sine on random vibration Abstract: Harvesting power with a piezoelectric vibration powered generator using a full-wave rectifier conditioning circuit is experimentally compared for varying sinusoidal, random and sine on random (SOR) input vibration scenarios. Additionally, the implications of source vibration characteristics on harvester design are discussed. Studies in vibration harvesting have yielded numerous alternatives for harvesting electrical energy from vibrations but piezoceramics arose as the most compact, energy dense means of energy transduction. The rise in popularity of harvesting energy from ambient vibrations has made piezoelectric generators commercially available. Much of the available literature focuses on maximizing harvested power through nonlinear processing circuits that require accurate knowledge of generator internal mechanical and electrical characteristics and idealization of the input vibration source, which cannot be assumed in general application. In this manuscript, variations in source vibration and load resistance are explored for a commercially available piezoelectric generator. We characterize the source vibration by its acceleration response for repeatability and transcription to general application. The results agree with numerical and theoretical predictions for in previous literature that load optimal resistance varies with transducer natural frequency and source type, and the findings demonstrate that significant gains are seen with lower tuned transducer natural frequencies for similar source amplitudes. Going beyond idealized steady state sinusoidal and simplified random vibration input, SOR testing allows for more accurate representation of real world ambient vibration. It is shown that characteristic interactions from more complex vibrational sources significantly alter power generation and power processing requirements by increasing harvested power, shifting optimal conditioning impedance, inducing significant voltage supply fluctuations and ultimately rendering idealized sinusoidal and random analyses insufficient.

alternative power↗

DOE OSTI2015

PS2013 Satellite Workshop on Photosynthetic Light-Harvesting Systems

These funds were used for partial support of the PS2013 Satellite Workshop on Photosynthetic Light-Harvesting Systems, that was held on 8-11 August, 2013, at Washington University, St. Louis, MO. This conference, held in conjunction with the 16th International Congress on Photosynthesis/St. Louis, continued a long tradition of light-harvesting satellite conferences that have been held prior to the previous six international photosynthesis congresses. In this Workshop, the basis was explored for the current interest in replacing fossil fuels with energy sources derived form direct solar radiation, coupled with light-driven electron transport in natural photosynthetic systems and how they offer a valuable blueprint for conversion of sunlight to useful energy forms. This was accomplished through sessions on the initial light-harvesting events in the biological conversion of solar energy to chemically stored energy forms, and how these natural photosynthetic processes serve as a guide to the development of robust bio-hybrid and artificial systems for solar energy conversion into both electricity or chemical fuels. Organized similar to a Gordon Research Conference, a lively, informal and collegial setting was established, highlighting the exchange of exciting new data and unpublished results from ongoing studies. A significant amount of time was set aside for open discussion and interactive poster sessions, with a special session devoted to oral presentations by talented students and postdoctoral fellows judged to have the best posters. This area of research has seen exceptionally rapid progress in recent years, with the availability of a number of antenna protein structures at atomic resolution, elucidation of the molecular surface architecture of native photosynthetic membranes by atomic force microscopy and the maturing of ultrafast spectroscopic and molecular biological techniques for the investigation and manipulation of photosynthetic systems. The conferees represented a diverse international and multidisciplinary group, with over 160 individuals attending from a total of 17 different countries. Attendees came from a wide range of fields assuring that the widest possible interdisciplinary exchanges. They included prominent biochemists, biophysicists, plant physiologists, chemical physicists, as well as theoretical and computational physical chemists, who presented their research findings or to hear the latest advances in this very dynamic field. In the choice of speakers, a balance was created between established scientists and young, emerging researchers, given this opportunity to showcase their results. Sessions were held on electronic and vibrational coherence including coherent sharing of excitations among donor and acceptor molecules during excitation energy transfer, nonphotochemical quenching, acclimation to light environments, evolution, adaptation and biodiversity of light-harvesting pigment-protein complexes, their structure and membrane organization, spectroscopy and dynamics, as well as artificial antenna systems. A joint session was also held with the participants from the Cyanobacterial Satellite Conference. A special issue of Photosynthesis Research devoted to light harvesting (Volume 121, Issue No. 1, July 2014) has recently appeared which contains peer-reviewed original research contributions arising from talks and posters presented at the PS2013 Satellite Workshop on Photosynthetic Light-Harvesting Systems. Edited by the Organizers of the Workshop, Robert E. Blankenship, Harry A. Frank and Robert A. Niederman, it includes topics ranging from the isolation of new bacteriochlorophyll species from green bacteria, temperature effects on the excited states of the newly discovered chlorophyll (Chl) ƒ, new architectures for enhancing energy capture by biohybrid light-harvesting complexes, forces governing the formation of light-harvesting rings, spectroscopy of carotenoids of algae and diatoms and the supramolecular organization of caroteno-Chl proteins in diatoms, the molecular basis for urea dissociation of phycocyanin trimers and the role of vibronic molecular excitation theory in describing the spectral dynamics of pigment-protein complexes.

14 SOLAR ENERGY↗