Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Geologic Modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Potential Formation Damage: An Integrated Reservoir Characterization Study of the Naturally Fractured Carbonate Middle Duperow Formation at the Kevin Dome, Montana

In this study, we integrate geologic and engineering data of a naturally fractured carbonate reservoir at the Kevin Dome, Montana. Well test data are correlated with core description, geochemical and lithology study to determine the flow behavior and communication within the injection test interval and to the surrounding area. Based on a dual-continuum geologic model, numerical brine injection simulations are carried out to validate the interpretation results from our well test analytical models and forecast the probability of CO 2 injection success using current reservoir properties. As a result, our well test analytical models as well as lithology/core description suggest that fluid flow may be mainly restricted to the injection interval and the assumption of radial (horizontal) flow may be appropriate. The well test models also indicate that there is potentially formation damage with a positive skin factor although prior to brine injection well tests, well stimulation through acid treatment was performed. Our numerical simulation results appear to confirm this formation damage by showing additional pressure buildup in the injection data during later test periods. To explain this, acid may have dissolved dolomite then dolomite or calcite may have been formed again further into the matrix/fracture system. Another possible explanation is mechanical clogging of the fractures due to acid dissolving dolomite and dislodging fine grains. Our work also predicts that if no additional well stimulation is performed, the project will have a lower probability of successfully injecting 1 million tons of CO 2 into the Middle Duperow formation over 4 years.

42 ENGINEERING↗
DOE OSTI2022

The Geology of The Mt. Simon Sandstone Storage Complex at the Wabash #1 Well, Vigo Co., Indiana (Subtask 7.2, Technical Report)

The Wabash CarbonSAFE project drilled the Wabash #1 stratigraphic test well (ID# 168045) at the Wabash Valley Resources (WVR) IGCC facility in Vigo County, Indiana, to characterize and evaluate the basal Cambrian Mt. Simon Sandstone for commercial-scale CO 2 storage near the site. This report presents an extensive geologic characterization of the Mt. Simon storage complex and relevant data collected from the Wabash #1 well, such as lithologic data collected from cuttings and core, geophysical logging, geomechanical analysis of core samples, and well testing and fluid sampling within the Mt. Simon Sandstone. The Mt. Simon storage complex comprises two major sections: the Mt. Simon Sandstone as the potential reservoir and the overlying Eau Claire Formation as its primary seal. Within the report, an extensive depositional, sedimentological, and geochronologic characterization of the Mt. Simon is included with supportive chapters on the regional geology and the geophysical, petrophysical, and petrologic data collected during the project. An overview of 2D seismic reflection data collected from and around the test well is presented. Also presented are chapters on the characterization of the sealing Eau Claire Formation, including a chapter on the capacity of the primary and secondary seals to the Mt. Simon as well as a chapter on geomechanical testing results of the Eau Claire Formation and Mt. Simon Sandstone. Some of the information discussed in this report was used in the development of static and dynamic geologic models of the Mt. Simon Sandstone storage complex. The static and dynamic modeling of CO 2 injection in the Mt. Simon Sandstone are discussed in a separate report (Dessenberger et al., 2022) under the Wabash CarbonSAFE project.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2022

Wabash CarbonSAFE. Geologic Analysis of the Potosi Dolomite Reservoir Interval and Potential Confining Units, at the Wabash #1 Well, Vigo Co., Indiana, Subtask 7.2, Technical Report

The Wabash CarbonSAFE project drilled the Wabash #1 stratigraphic test well (ID# 168045) at the Wabash Valley Resources (WVR) IGCC facility in Vigo County, Indiana, to evaluate the feasibility of commercial-scale CO 2 storage near the site. The Mt. Simon Sandstone was the initial target for storage evaluation and was found to have generally poor reservoir qualities in the Wabash #1 well. Focus was then placed on the secondary target, the Potosi Dolomite. For storage and containment evaluation an extensive suite of geophysical logs was collected throughout the borehole, and whole cores were obtained from the Mt. Simon Sandstone, Eau Claire Formation, and Maquoketa Group. The Maquoketa Group is identified as a regionally extensive secondary sealing interval above the Mt. Simon Sandstone and as a primary seal for the Potosi Dolomite storage complex. Due to concerns over potential lost circulation zones in the Potosi Dolomite during drilling, no core samples or Formation Micro Imager (FMI) logs were acquired in the Potosi Dolomite. However, cased hole well testing was performed over a 20 feet (6 m) interval within the Potosi Dolomite during which a fluid swab sample was obtained. Approximately 35 miles of 2D seismic information was acquired in the project area near Wabash #1 to aid in reservoir and caprock characterization. The highly porous and permeable zones in the Potosi Dolomite and lower Oneota Dolomite observed within the Wabash #1 well are, for the purpose of this report, considered the same reservoir package and referred to as the Potosi reservoir interval. This report presents a regional depositional context for the Potosi reservoir interval, the overlying confining zones in the Knox Group, and Maquoketa Group primary seal. This context is developed through detailed information obtained from the Wabash #1 well such as lithologic data collected from cuttings and core, geophysical logging, geomechanical analysis of core samples, and well testing and fluid sampling within the Potosi reservoir interval. Information discussed in this report was compiled as a basis for the development of static and dynamic geologic models of the Potosi Dolomite storage complex. The static and dynamic modeling of CO 2 injection in the Potosi reservoir interval are discussed in a separate report (Dessenberger et al., 2022) under the Wabash CarbonSAFE project.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2022

Well-Controlled Hydro-thermo-chemical Stimulation of a Coso Geothermal Well to Enhance Productivity

The goal of this project was to demonstrate controlled fracturing and permeability increase to enhance resource production and power generation at Coso. It was planned to stimulate at least two intervals in the Well 73-18RD with zonal isolation using advanced high-temperature packer technology. The anticipation was that a hydraulic fracture would form in one zone and in the second zone natural fractures would reopen, shear and extend, thereby increasing fluid communication in the field. In both cases, the intent was to carefully design the stimulation to take advantage of the relative roles of hydraulic pressure, thermal stress and chemical (“hydro-thermo-chemical”) dissolution. The project had planned to use the Welltec Annular Barrier (WAB) system developed as part of another DOE-funded project which was on schedule to be ready for field deployment. If successful, the Coso Operating Company would incorporate this approach into their ongoing well maintenance in other wells increasing the total MWs produced. The project had multiple tasks and the objective of Task 1 was to develop a workover plan, to build a geologic model, to design a stimulation program, and to work with the operating and services companies to develop a detailed budget and obtain the necessary permits and sundry notices. In Phase 2 the workover plan would be implemented, the designed stimulation would be carried out, and subsequently the well would logged and tested to measure the impact of stimulation. Per sponsor request, a Pre-Task 1 activity with a Go/No Go decision point was scheduled in Task 1.

02 PETROLEUM↗
DOE OSTI2024

Carbonated Brine Injection Pilot Plan

This is a three-year effort to develop a plan for carbonated brine injection, with an end goal of a path for pilot scale implementation. Carbonated brine injection (CBI) strategy was planned for a potential pilot site through simulation study. Methods include geology model, reservoir modeling, wellbore materials compatibility and corrosion modeling, reactive transport modeling.

Xiong, Wei↗
DOE OSTI2022

Introduction to Evolve Central Appalachia

The Evolve-CAPP project is developing and implementing strategies to enable the Central Appalachian basin to realize its full economic potential for producing high-value, non-fuel, carbon-ore (CO) products, rare earth elements (REE), and critical minerals (CM). The Basinal Assessment of CORE-CM Resources is a state-of-the-art geological model and comprehensive database that will be used to identify, locate, and quantify in-situ resources in the basin. Restrictive aspects of resource recovery, such as ownership and legal restrictions, are being considered in estimating recoverable resources. A gap analysis of missing or unavailable data that could not be fully integrated in the initial assessment due to budget, access, or other constraints during the assessment effort is planned. A characterization and data acquisition plan to fully characterize the basin’s CORE-CM potential will address gaps in data. The plan will be developed with input from project team members and relevant stakeholders, including land and mineral holding companies and coal operators, who maintain sampling programs as part of their normal operations.

Bishop, Richard↗
DOE OSTI2022

Occurrences of REE and CM in volcanic ash beds associated with coals in SW Wyoming & NW Colorado

Rare earth elements (REEs) and critical minerals (CMs) are vital components in the nation’s economy, national security, and the further strengthening of our renewable energy capabilities and infrastructure. Recent work has revealed more insight into previously unknown modes of occurrence for REEs, particularly in coal seams and adjacent noncoal sediments, but many data gaps persist. Temporal relationships between coal beds and adjacent tonstiens, ash beds, or other partings are widely recognized but not fully understood. Variations in REE concentration and their direct or indirect association with coal beds are not predictable. This study presents findings from examining lateral and potentially stratigraphic variation of REE and CM occurrences in coals of late Cretaceous and Paleocene age. In this study we collected and examined samples of differing ages both core and coal mine exposures for qualitative x-ray fluorescence (XRF), and multi-element geochemistry. Preliminary XRF data indicates variable levels of light REEs in a core from the Yampa coalfield of Moffat County in northwest Colorado. An absence of similar enrichments in slightly older coals in the Adaville Formation of the Fold and Thrust belt in southwest Wyoming is described from XRF and ICP-MS evaluation. Previous work has shown an association with the Yampa Bed and REE enrichment in coals of the Upper Cretaceous Williams Fork Formation. While not common and widespread, this association suggests that leaching or reworking of the ash bed could lead to elevated REEs in the adjacent coal. We investigate differences between the two data occurringas geologic compositions and post-depositional histories. In-depth petrography and precise geochemistry should reveal data that at the very least will help improve some aspects of the geologic models of coal basins and the effect of an influx of non-coal sediments.

REE, CM, ash, volcanic ash, coal↗
DOE OSTI2021

North Dakota CarbonSAFE Baseline Microgravity Survey, Lessons Learned

Conference presentation at American Geophysical Union (AGU) Fall Meeting, New Orleans, LA and virtual, December 13–17, 2021. The team conducted a baseline microgravity survey near Minnkota Power Cooperative’s Milton R. Young power station, south of Center, North Dakota, as a part of the North Dakota CarbonSAFE (Carbon Storage Assurance Facility Enterprise) geophysical activities. The goal of this survey was to assess whether microgravity would be an appropriate technique to monitor CO 2 stored at this site.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2022

On the Feasibility of Geophysical Methods for CO 2 Monitoring in the North Dakota CarbonSAFE Project

Conference presentation at American Institute of Chemical Engineers (AIChE) Annual Meeting, Phoenix, AZ, November 13–18, 2022. An analysis of rock physics crossplots and diagnostic models suggests that the baseline seismic data may be sensitive to changes in lithology and porosity of the Broom Creek Formation and that these changes may be detectable by prestack seismic inversion.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2022

North Dakota CarbonSAFE - A Success Story

Conference presentation at American Institute of Chemical Engineers (AIChE) Annual Meeting, Phoenix, AZ, November 13–18, 2022. The EERC and the project team leveraged North Dakota’s Class VI primacy status to prepare and submit successful applications for two storage facility permits and associated monitoring and UIC Class VI injection wells. The applications and their supporting documents were prepared in accordance with the North Dakota Century Code and the North Dakota Administrative Code and show the effectiveness of working with a state that has been granted Class VI primacy.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2023

Geochemical Modeling of the Confining Unit at a CO 2 Storage Site in the Williston Basin, North Dakota

Conference presentation for American Association of Petroleum Geologists (AAPG) Carbon Capture, Utilization, and Storage (CCUS) Conference, Houston, TX, April 25–27, 2023. This geochemical modeling study investigates the evolution of geochemical reactions among CO 2 , formation water, and rocks of the two confining units above and below the CO 2 storage unit at one of the permitted CO 2 storage sites in the Williston Basin. The model is built on PHREEQC-coded chemical equilibrium thermodynamics.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2022

Quality Analysis of Baseline Time-Lapse CSEM Data CarbonSAFE Project, North Dakota

Conference presentation at International Meeting for Applied Geoscience & Energy (IMAGE), Houston, TX, August 28 – September 2, 2022. When a series of time-lapse CSEM surveys are designed to measure the often-small variations in signal seen in CCUS projects, the primary concern must be collecting the highest-quality data and reducing as much noise as possible. This includes optimization during planning and feasibility, careful and consistent quality checks in the field, and transparent and repeatable postprocessing steps. We apply this practice to a baseline (prior to CO 2 injection) CSEM data set collected for a time-lapse survey in Center, North Dakota, as a part of the North Dakota CarbonSAFE project, and describe the rigorous quality control and assessment methods used, including noise removal and data validation with 1D and 3D inversion to tie results to borehole logs. The final result is an accurate and representative CSEM data set and information that stakeholders can use to inform future time-lapse survey costs and designs.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2023

CCUS Plume Monitoring: Verifying Surface CSEM Measurements to Log Scale Available

Conference presentation at Society of Petrophysicists and Well Log Analysts (SPWLA) 64th Annual Symposium, Lake Conroe, Texas, June 10–14, 2023. In carbon capture, utilization, and storage (CCUS) monitoring, dynamic plume monitoring and reservoir seal are key issues. Plume monitoring is best addressed with electromagnetics (sensitive to the resistivity contrast) and reservoir leakage with microseismics. A case history from North Dakota illustrates how we can tie surface-controlled source electromagnetic (CSEM) measurements to the three-dimensional (3D) anisotropic models derived from the available logs. This allows us to certify baseline measurements within the context of the borehole information.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2022

EERC Final Topical Report – Findings on Subtask 3.2 – Produced Water Management Through Geologic Homogenization, Conditions, and Reuse

The Energy & Environmental Research Center (EERC) was awarded a contract by the North Dakota Industrial Commission (NDIC) Oil and Gas Research Program (NDIC No. G-051-101) to conduct a study on the recycling of water used in oil and gas operations, also known as produced water, from oil- and gas-producing regions of North Dakota as directed by Section 19 of North Dakota House Bill 1014. This final report provides a compilation of results of the study, which include regulatory, scientific, technological, and feasibility methods and considerations associated with North Dakota produced water management. The report provides a synopsis of this project’s previously submitted produced water assessment report entitled “Produced Water Management and Recycling Options in North Dakota” (Energy & Environmental Research Center, 2020), with updated values provided as appropriate. The report provides the results from the investigation of a novel produced water management strategy, referred to as geologic homogenization, conditioning, and reuse (GHCR), which aims to use a subsurface geologic formation as a natural medium for managing produced water recycling and reuse. Water management is a significant technical and economic challenge for sustainable oil and gas production, and water volumes are intrinsically linked to oil production volumes. North Dakota oil production rose to over 1.5 million barrels (MMbbl)/day in 2019, and despite a downturn in oil price in early 2020, North Dakota oil production has recovered to 1.1 MMbbl/day as of August 2021. Bakken petroleum system development between 2008 and 2020 has resulted in a nearly fourfold increase in produced water volumes to 642 MMbbl/yr in 2020 after peaking at 740 MMbbl/yr in 2019 and a fivefold increase in saltwater disposal (SWD) volumes to 565 MMbbl/yr in 2020 after a peak of 682 MMbbl/yr in 2019. Produced water and SWD volumes are forecasted to double by 2030. SWD is the primary method of produced water management used in North Dakota, with approximately 95% of the SWD volume occurring through subsurface injection into sandstones of the Dakota Group (Dakota). Localized pressurization of the Dakota resulting from SWD and projected increases in produced water volumes could impact the economics of North Dakota oil production. As a result, there is an emerging need to pursue alternative produced water management approaches, including recycling and reuse. While produced water recycling is not yet widespread, commercial operators are making strides in overcoming the technical challenges of using high salinity produced water in completion operations (Marathon Oil, 2020). As water management continues to be a key focal point in companies’ environmental, social, and governance (ESG) initiatives, focus on water management, including recycling, will likely continue to increase. Laboratory column testing, field sample collection, geologic modeling and numerical simulation, and techno-economic analysis all indicate that GHCR could feasibly be implemented as a potential water management option. Laboratory column testing and field sample collection indicate that the Inyan Kara sandstone and native formation fluid are capable of homogenizing with the Bakken produced water to a point where the fluid composition appears to stabilize. Extracting that stabilized fluid could be considered homogeneous and capable of providing individual batches of hydraulic fracturing fluid. Numerical simulation results indicate that extraction of fluids from the Inyan Kara in a GHCR implementation scenario is capable of reducing formation pressure, which would help ease localized pressurization of the Inyan Kara and extend the available capacity for nearby existing SWD wells. Economic analysis indicates that there are scenarios where GHCR implementation can be a competitive or even lower-cost option than a conventional water management approach. Site-specific conditions will dictate the economic potential of GHCR, but potentially attractive sites for GHCR implementation will be those that are located above a pressurized zone of the Inyan Kara, need six or more Bakken infill wells, and face high costs for conventional SWD and/or freshwater. Based on the regulatory review, drilling into the Inyan Kara for SWD and to harness as a source water for industrial use have precedent in North Dakota, and a workable regulatory solution for GHCR seems likely. However, restrictions in the state regarding surface storage and transport of produced fluids may limit some activities, which will affect how GHCR could ultimately be implemented. In summary, this study reveals pursuing GHCR can be a viable approach to water management in North Dakota. The GHCR concept addresses some of the challenges that hinder the more traditional approaches to recycling in the industry. Furthermore, an assessment of the current landscape of water management within the state reveals the ongoing trend of increasing volumes of produced water and SWD. Projections reveal that the volumes of produced water that need to be managed are expected to double over the next decade (Energy & Environmental Research Center, 2020). With the continued development of the Bakken and continuing driving factors related to ESG initiatives, implementing a practice such as GHCR is a feasible approach to adding recycling of produced water to industry within the state. This subtask was cofunded through the EERC–U.S. Department of Energy Joint Program on Research and Development for Fossil Energy-Related Resources Cooperative Agreement No. DE-FE0024233. Nonfederal funding was provided by the North Dakota Industrial Commission Oil and Gas Research Program. References Energy & Environmental Research Center, 2020, Produced water management and recycling options in North Dakota: Final Report for North Dakota Legislative Management Energy Development and Transmission Committee and North Dakota Industrial Commission. Marathon Oil, 2020, Sustainability report: https://cdn.sanity.io/files/ghcnw9z2/website/ 91744eb6ef8fbe59505a911c6b8d2e8dd9a537fa.pdf?dl (accessed November 2021).

02 PETROLEUM↗
DOE OSTI2023

Moment tensor reconstruction

A seismic monitoring system includes a plurality of seismic monitors and a processing device operatively coupled to the plurality of seismic monitors. The processing device receives recordings of waveforms of motion detected at the plurality of seismic detectors in a geographic area. The processing device applies the respective recordings to corresponding positions of the seismic detectors in a three-dimensional geological model that describes its elastic attributes and tests a plurality of moment tensors at a plurality of locations. Based on the testing, the processing device determines a globally convergent source location and moment tensor in the three-dimensional model based on the testing.

Petrov, Petr↗
DOE OSTI2024

Geothermal Reservoir Simulation Analysis in Support of Electricity Co-Production Feasibility Study at the Blackburn Oil Field, Nevada: Preprint

Geothermal electricity co-production is a viable option for oil reservoirs producing large water cuts with elevated wellhead-observed temperatures. Repurposing existing oil wells significantly reduces initial investment costs historically associated with geothermal resource utilization. The National Renewable Energy Laboratory (NREL), partnering with Gradient Geothermal, Inc. (formerly known as Transitional Energy) and Grant Canyon Oil and Gas, has been tasked to evaluate the feasibility of geothermal electricity co-production at the Blackburn Oil Field with Organic Rankine Cycle (ORC) generators. The Devonian steady-state reservoir has historically been producing high water cuts of 240 degrees F (115.6 degrees C) observed at the wellhead without documented pressure drawdown or thermal breakthrough. An estimated initial reservoir temperature of approx. 260degreesF (126.7 degrees C) has been observed in the field and history-matched in a wellbore production analysis and reservoir simulation. Our objective was to develop a conceptual geological model of the subsurface, simulate a natural-state reservoir, model production scenarios, and complete a technical feasibility analysis to accomplish this task. Through extensive modeling and the use of available proprietary and public data, it was possible simulate three scenarios that indicated minimal thermal decline over the duration of a simulated ten-year production and re-injection scheme.

Blackburn Nevada↗
DOE OSTI2025

Geothermal Reservoir Simulation Analysis in Support of Electricity Co-Production Feasibility Study at the Blackburn Oil Field, Nevada

Geothermal electricity co-production is a viable option for oil reservoirs producing large water cuts with elevated wellhead temperatures. Repurposing existing oil wells significantly reduces initial investment costs historically associated with geothermal resource utilization. The National Renewable Energy Laboratory (NREL), partnering with Gradient Geothermal, Inc. (formerly known as Transitional Energy) and Grant Canyon Oil and Gas, has been tasked to evaluate the feasibility of geothermal electricity co-production at the Blackburn Oil Field with Organic Rankine Cycle (ORC) generators. The Devonian steady-state reservoir has historically been producing high water cuts of 240 degrees F (115.6 degrees C) observed at the wellhead without documented pressure drawdown or thermal breakthrough. An estimated initial reservoir temperature of approx. 260 degrees F (126.7 degrees C) has been observed in the field and history-matched in a wellbore production analysis and reservoir simulation. Our objective was to develop a conceptual geological model of the subsurface, simulate a natural-state reservoir, model production scenarios, and complete a technical feasibility analysis to accomplish this task. Through extensive modeling and the use of available proprietary and public data, it was possible simulate three scenarios that indicated minimal thermal decline over the duration of a simulated ten-year production and re-injection scheme.

Blackburn Nevada↗
DOE OSTI2023

Unsaturated alluvium disposal modelling with improved geological realism

This report describes specific activities in the Fiscal Year (FY) 2023 associated with the Geologic Disposal Safety Assessment (GDSA) Repository Systems Analysis (RSA) work package funded by the Spent Fuel and Waste Science and Technology (SFWST) Campaign of the U.S. Department of Energy Office of Nuclear Energy (DOE-NE), Office of Spent Fuel and Waste Disposition (SFWD). The overall objective of the GDSA RSA work package is to develop generic deep geologic repository concepts and system performance assessment (PA) models in several potential host-rock environments, and to simulate and analyze these generic repository concepts and models using the GDSA Framework toolkit and other tools as needed. The specific GDSA goal addressed in this report is reference case development, simulation, and analysis for the unsaturated alluvium (UZ), one of the four potential host-rocks considered by the GDSA. Further, we aim to exercise the simulation tools and methodologies under development by GDSA for PA modelling.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗