Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “GS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS2012

Hypersonic Boundary Layer Measurements with Variable Blowing Rates Using Molecular Tagging Velocimetry

Measurements of mean and instantaneous streamwise velocity profiles in a hypersonic boundary layer with variable rates of mass injection (blowing) of nitrogen dioxide (NO2) were obtained over a 10-degree half-angle wedge model. The NO2 was seeded into the flow from a slot located 29.4 mm downstream of the sharp leading edge. The top surface of the wedge was oriented at a 20 degree angle in the Mach 10 flow, yielding an edge Mach number of approximately 4.2. The streamwise velocity profiles and streamwise fluctuating velocity component profiles were obtained using a three-laser NO2->NO photolysis molecular tagging velocimetry method. Observed trends in the mean streamwise velocity profiles and profiles of the fluctuating component of streamwise velocity as functions of the blowing rate are described. An effort is made to distinguish between the effect of blowing rate and wall temperature on the measured profiles. An analysis of the mean velocity profiles for a constant blowing rate is presented to determine the uncertainty in the measurement for different probe laser delay settings. Measurements of streamwise velocity were made to within approximately 120 gm of the model surface. The streamwise spatial resolution in this experiment ranged from 0.6 mm to 2.6 mm. An improvement in the spatial precision of the measurement technique has been made, with spatial uncertainties reduced by about a factor of 2 compared to previous measurements. For the quiescent flow calibration measurements presented, uncertainties as low as 2 m/s are obtained at 95% confidence for long delay times (25 gs). For the velocity measurements obtained with the wind tunnel operating, average single-shot uncertainties of less than 44 m/s are obtained at 95% confidence with a probe laser delay setting of 1 gs. The measurements were performed in the 31-inch Mach 10 Air Tunnel at the NASA Langley Research Center.

Bathel, Brett F.↗
NASA NTRS2014

Facility Systems, Ground Support Systems, and Ground Support Equipment General Design Requirements

This standard establishes requirements and guidance for design and fabrication of ground systems (GS) that includes: ground support equipment (GSE), ground support systems (GSS), and facility ground support systems (F GSS) to provide uniform methods and processes for design and development of robust, safe, reliable, maintainable, supportable, and cost-effective GS in support of space flight and institutional programs and projects.

Ground Support Equipment↗
NASA NTRS2014

Control and Non-Payload Communications Generation 1 Prototype Radio Flight Test Report

Unmanned aircraft (UA) represent a new capability that will provide a variety of services in the Government (public) and commercial (civil) aviation sectors. The growth of this potential industry has not yet been realized because of the lack of a common understanding of what is required to safely operate Unmanned Aircraft Systems in the National Airspace System (UAS in the NAS). The desire and ability to fly UA is of increasing urgency. The application of UA to perform national security, defense, scientific, and emergency management are driving the critical need for less restrictive access by UA to the NAS. Existing Federal Aviation Regulations, procedures, and technologies do not allow routine UA access to the NAS. Access to the NAS is hampered by challenges such as the lack of an onboard pilot to see and avoid other aircraft; the ability of a single pilot or operator to control multiple UA; the reliance on command and control (C2) links; the altitudes, speeds, and duration at which the aircraft fly; and the wide variation in UA size and performance. NASA is working with other Government agencies to provide solutions that reduce technical barriers and make access to the NAS routine. This goal will be accomplished through system-level integration of key concepts, technologies, or procedures and through demonstrations of these integrated capabilities in an operationally relevant environment. This project provides an opportunity to transition the acquired empirical data and knowledge to the Federal Aviation Administration and other stakeholders to help them define the requirements for routine UA access to the NAS.Radio communications channels for UA are currently managed through exceptions and use either Department of Defense frequencies for line-of-sight (LOS) and satellite-based communications links, low-power LOS links in amateur bands, or unlicensed Industrial/Scientific/Medical (ISM) frequencies. None of these frequency bands are designated for safety and regularity of flight. Only recently has radiofrequency (RF) spectrum been allocated by the International Telecommunications Union specifically for commercial UA C2, LOS communication (L-Band: 960 to 1164 MHz, and C-Band: 5030 to 5091 MHz). The safe and efficient integration of UA into the NAS requires the use of protected RF spectrum allocations and a new data communications system that is both secure and scalable to accommodate the potential growth of these new aircraft. Data communications for UA-referred to as control and non-payload communications (CNPC)-will be used to exchange information between a UA and a ground station (GS) to ensure safe, reliable, and effective UA flight operation. The focus of this effort is on validating and allocating new RF spectrum and data link communications to enable civil UA integration into the NAS. Through a cost-sharing cooperative agreement with Rockwell Collins, Inc., the NASA Glenn Research Center is exploring and performing the necessary development steps to realize a prototype UA CNPC system. These activities include investigating signal waveforms and access techniques, developing representative CNPC radio hardware, and executing relevant testing and validation activities. There is no intent to manufacture the CNPC end product, rather the goals are to study, demonstrate, and validate a typical CNPC system that will allow safe and efficient communications within the L-Band and C-Band spectrum allocations. The system is addressing initial "seed" requirements from RTCA, Inc., Special Committee 203 (SC-203) and is on a path to Federal Aviation Administration certification. This report provides results from the flight testing campaign of the Rockwell Collins Generation 1 prototype radio, referred hereafter as the "radio." The radio sets operate within the 960- to 977-MHz frequency band with both air and ground radios using identical hardware. Flight tests involved one aircraft and one GS. Results include discussion of aircraft flight paths and associated radio performance.

Shalkhauser, Kurt A.↗
NASA NTRS2013

Conceptual Design of the Adaptive Optics System for the Laser Communication Relay Demonstration Ground Station at Table Mountain

The Laser Communication Relay Demonstration will feature a geostationary satellite communicating via optical links to multiple ground stations. The first ground station (GS-1) is the 1m OCTL telescope at Table Mountain in California. The optical link will utilize pulse position modulation (PPM) and differential phase shift keying (DPSK) protocols. The DPSK link necessitates that adaptive optics (AO) be used to relay the incoming beam into the single mode fiber that is the input of the modem. The GS-1 AO system will have two MEMS Deformable mirrors to achieve the needed actuator density and stroke limit. The AO system will sense the aberrations with a Shack-Hartmann wavefront sensor using the light from the communication link's 1.55 microns laser to close the loop. The system will operate day and night. The system's software will be based on heritage software from the Palm 3000 AO system, reducing risk and cost. The AO system is being designed to work at r(sub 0) greater than 3.3 cm (measured at 500 nm and zenith) and at elevations greater than 20deg above the horizon. In our worst case operating conditions we expect to achieve Strehl ratios of over 70% (at 1.55 microns), which should couple 57% of the light into the single mode DPSK fiber. This paper describes the conceptual design of the AO system, predicted performance and discusses some of the trades that were conducted during the design process.

optical communications↗
NASA NTRS2013

The Architecture of the Laser Communications Relay Demonstration Ground Stations: An Overview

NASA's Laser Communication Relay Demonstration (LCRD) will be NASA's first long-duration demonstration of laser communications (lasercom) in space, providing geosynchronous-satellite-hosted bidirectional relay services between two Earth ground stations. LCRD will leverage and enhance existing ground stations. Ground Station 1 (GS-1) will leverage the Optical Communications Telescope Laboratory (OCTL) built by JPL, while Ground Station 2 (GS-2) will leverage the Lunar Laser Communications Demonstration (LLCD) Ground Terminal (LLGT) built by MIT Lincoln Laboratory. While each ground system has unique telescopes and integrated optics, many of the backend subsystems (e.g., communications, environmental monitoring, control, user simulators) will be common to both terminals. Here we provide an overview of the architecture of the LCRD ground stations, and the planned enhancements to the existing facilities.

deformable mirror↗
NASA NTRSDate not supplied

Ground Stop Adjuster: A Machine Learning Approach to Improve Air Traffic Management Initiatives

Traffic Management Initiatives (TMIs) play a crucial role in balancing demand and capacity within the U.S. National Airspace System (NAS). In current practice, traffic management coordinators (TMCs) determine and issue TMIs and recent research has explored the use of machine learning tools to aid the TMCs. However, most studies have primarily focused on a particular type of TMI, i.e., Ground Delay Programs (GDPs) due to their higher rate of occurrence and longer duration. This study investigates a machine learning approach for monitoring and adjusting a different type of TMI, i.e., Ground Stop (GS), aiming to assist human decision-makers with accurate, consistent, and timely recommendations. Using data from three major airports in the New York metroplex, we evaluated models that predict GS parameters, such as duration and scope. Our results demonstrate that using data from all airports in the NY metroplex and increasing feature granularity improve the prediction accuracy of the ML models.

Farzan Masrour Shalmani↗
DOE OSTI2024

Validation of NSFsim as a Grad-Shafranov equilibrium solver at DIII-D

Plasma shape is a significant factor that must be considered for any Fusion Pilot Plant (FPP) as it has significant consequences for plasma stability and core confinement. A new simulator, NSFsim, has been developed based on a historically successful code, DINA [1], offering tools to simulate both transport and plasma shape. Specifically, NSFsim is a free boundary equilibrium and transport solver and has been configured to match the properties of the DIII-D tokamak. This paper is focused on validating the Grad-Shafranov (GS) solver of NSFsim by analyzing its ability to recreate the plasma shape, the poloidal flux distribution, and the measurements of the simulated diagnostic signals originating from flux loops and magnetic probes in DIII-D. Five different plasma shapes are simulated to show the robustness of NSFsim to different plasma conditions; these shapes are Lower Single Null (LSN), Upper Single Null (USN), Double Null (DN), Inner Wall Limited (IWL), and Negative Triangularity (NT). The NSFsim results are compared against real measured signals, magnetic profile fits from EFIT [2], and another plasma equilibrium simulator, GSevolve [3]. EFIT reconstructions of shots are readily available at DIII-D, but GSevolve was manually ran by us to provide simulation data to compare against.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Solution-Processable Polymer Donor-Small Molecule Acceptor Bulk Heterojunction Organocatalysts for Enhancing CO 2 -to-CO Photoconversion

Metal-free organic semiconductors have emerged as a kind of promising star material in photocatalysis. However, their photocatalytic efficacy is impeded by the great recombination rate of the photogenerated charge carriers. Herein, we demonstrate the devising of solution-processable organic semiconductor bulk heterojunction (BHJ) systems with varying ratios by using BP3DT and PC 61 BM as the donor (D) and acceptor (A) candidates, respectively, for enhanced selective CO production from CO 2 photoreduction. The prepared BP3DT/PC 61 BM BHJs are solution-processed on both glass substrates (GS) and molecular sieves (MS) via a drop-casting technique to form an active thin film and porous photocatalysts to catalyze CO production. All BP3DT/PC 61 BM BHJs efficiently produce CO as the primary product in the existence of trace-level TEA/H 2 O (0.5 mL). Our results show that the photocatalytic efficiency depended on the D/A w% ratios and its nanoscale phase separation morphology within the BHJ, contributing to the promotion of exciton dissociation. Additionally, the BHJ undergoes an ostensible morphological transition from large-scale phase-separation to a fine mixed homogeneous nanoscale by varying the BP3DT/PC 61 BM blend ratio from 30/70 w% to 70/30 w%, which increases the interfacial area and shortens the distance of the exciton to the D/A surface, and promotes charge carrier separation, corroborated by photo-optical and photoelectrochemical experimental results. Accordingly, the resulting BP3DT/PC 61 BM BHJ@MS with a D/A ratio of 70/30 w% achieves a CO yield of 819 μmol·g cat -1 h -1 , surpassing those of pure PC 61 BM (126 μmol·g cat -1 h -1 ) and BP3DT (72 μmol·g cat -1 h -1 ) by 6.5- to 11.3-fold and also exceeding that of metal-free linear conjugated polymer-based organocatalysts reported to date. Specifically, this is the first work to develop an organic-semiconductor-based BHJ photocatalyst, which may offer a nascent way to design more efficient organocatalysts for CO 2 reduction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Enzymatic Routes to Designer Hemicelluloses for Use in Biobased Materials

Various enzymes can be used to modify the structure of hemicelluloses directly in vivo or following extraction from biomass sources, such as wood and agricultural residues. Generally, these enzymes can contribute to designer hemicelluloses through four main strategies: (1) enzymatic hydrolysis such as selective removal of side groups by glycoside hydrolases (GH) and carbohydrate esterases (CE), (2) enzymatic cross-linking, for instance, the selective addition of side groups by glycosyltransferases (GT) with activated sugars, (3) enzymatic polymerization by glycosynthases (GS) with activated glycosyl donors or transglycosylation, and (4) enzymatic functionalization, particularly via oxidation by carbohydrate oxidoreductases and via amination by amine transaminases. Thus, this Perspective will first highlight enzymes that play a role in regulating the degree of polymerization and side group composition of hemicelluloses, and subsequently, it will explore enzymes that enhance cross-linking capabilities and incorporate novel chemical functionalities into saccharide structures. These enzymatic routes offer a precise way to tailor the properties of hemicelluloses for specific applications in biobased materials, contributing to the development of renewable alternatives to conventional materials derived from fossil fuels.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Distinct binding conformations of epinephrine with α- and β-adrenergic receptors

Abstract Agonists targeting α 2 -adrenergic receptors (ARs) are used to treat diverse conditions, including hypertension, attention-deficit/hyperactivity disorder, pain, panic disorders, opioid and alcohol withdrawal symptoms, and cigarette cravings. These receptors transduce signals through heterotrimeric Gi proteins. Here, we elucidated cryo-EM structures that depict α 2A -AR in complex with Gi proteins, along with the endogenous agonist epinephrine or the synthetic agonist dexmedetomidine. Molecular dynamics simulations and functional studies reinforce the results of the structural revelations. Our investigation revealed that epinephrine exhibits different conformations when engaging with α-ARs and β-ARs. Furthermore, α 2A -AR and β 1 -AR (primarily coupled to Gs, with secondary associations to Gi) were compared and found to exhibit different interactions with Gi proteins. Notably, the stability of the epinephrine–α 2A -AR–Gi complex is greater than that of the dexmedetomidine–α 2A -AR–Gi complex. These findings substantiate and improve our knowledge on the intricate signaling mechanisms orchestrated by ARs and concurrently shed light on the regulation of α-ARs and β-ARs by epinephrine.

Biochemistry & Molecular Biology↗
DOE OSTI2025

Feedforward equilibrium trajectory optimization with GSPulse

One of the common tasks required for designing new plasma scenarios or evaluating capabilities of a tokamak is to design the desired equilibria using a Grad-Shafranov (GS) equilibrium solver. However, most standard equilibrium solvers are time-independent and do not include dynamic effects such as plasma current flux consumption, induced vessel currents, or voltage constraints. Another class of tools, plasma equilibrium evolution simulators, do include time-dependent effects. These are generally structured to solve the forward problem of evolving the plasma equilibrium given feedback-controlled voltages. In this work, we introduce GSPulse, a novel algorithm for equilibrium trajectory optimization, that is more akin to a pulse planner than a pulse simulator. GSPulse includes time-dependent effects and solves the inverse problem: given a user-specified set of target equilibrium shapes, as well as limits on the coil currents and voltages, the optimizer returns trajectories of the voltages, currents, and achievable equilibria. This task is useful for scoping performance of a tokamak and exploring the space of achievable pulses. The computed equilibria satisfy both Grad-Shafranov force balance and axisymmetric circuit dynamics. The optimization is performed by restructuring the free-boundary equilibrium evolution equations into a form where it is computationally efficient to optimize the entire dynamic sequence. GSPulse can solve for hundreds of equilibria simultaneously within a few minutes. GSPulse has been validated against NSTX-U and MAST-U experiments and against SPARC feedback control simulations, and is being used to perform scenario design for SPARC. The computed trajectories can be used as feedforward inputs that are connected to the feedback controller to inform and improve feedback performance. The code for GSPulse is available open-source at github.com/jwai-cfs/GSPulse_public.

equilibrium↗
DOE OSTI2024

Accelerating data acquisition with FPGA-based edge machine learning: a case study with LCLS-II

New scientific experiments and instruments generate vast amounts of data that need to be transferred for storage or further processing, often overwhelming traditional systems. Edge machine learning (EdgeML) addresses this challenge by integrating machine learning (ML) algorithms with edge computing, enabling real-time data processing directly at the point of data generation. EdgeML is particularly beneficial for environments where immediate decisions are required, or where bandwidth and storage are limited. In this paper, we demonstrate a high-speed configurable ML model in a fully customizable EdgeML system using a field programmable gate array (FPGA). Our demonstration focuses on an angular array of electron spectrometers, referred to as the ‘CookieBox,’ developed for the Linac Coherent Light Source II project. The EdgeML system captures 51.2 Gbps from a 6.4 GS s −1 analog to digital converter and is designed to integrate data pre-processing and ML inside an FPGA. Our implementation achieves an inference latency of 0.2 µs for the ML model, and a total latency of 0.4 µs for the complete EdgeML system, which includes pre-processing, data transmission, digitization, and ML inference. The modular design of the system allows it to be adapted for other instrumentation applications requiring low-latency data processing.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Arsenic stress triggers active exudation of arsenic–phytochelatin complexes from Lupinus albus roots

Abstract Arsenic (As) contamination of soils threatens the health of millions globally through accumulation in crops. While plants detoxify As via phytochelatin (PC) complexation and efflux of arsenite from roots, arsenite efflux mechanisms are not fully understood. Here, white lupin (Lupinus albus) was grown in semi-hydroponics, and exudation of glutathione (GSH) derivatives and PCs in response to As was measured using LC-MS/MS. Inhibiting synthesis of the PC precursor GSH with l-buthionine sulfoximine (BSO) or ABC transporters with vanadate drastically reduced (>22%) GSH derivative and PC2 exudation, but not PC3 exudation. This was accompanied by As hypersensitivity in plants treated with BSO and moderate sensitivity with vanadate treatment. Investigating As–PC complexation revealed two distinct As–PC complexes, As bound to GSH and PC2 (GS–As–PC2) and As bound to PC3 (As–PC3), in exudates of As-treated lupin plants. Vanadate inhibited As–PC exudation, while BSO inhibited both the synthesis and exudation of As–PC complexes. These results demonstrate a role for GSH derivatives and PC exudation in lupin As tolerance and reveal As–PC exudation as a new potential mechanism contributing to active As efflux in plants. Overall, this study uncovers insights into rhizosphere As detoxification with potential to help mitigate pollution and reduce As accumulation in crops.

Plant Sciences↗
DOE OSTI2026

Optimization performance, fidelity, and cost: SIAM VQE

This dataset contains files storing results from classically-simulated quantum subroutines within a dynamical mean-field theory workflow, and jupyter notebooks processing the data in these files to generate plots. The files store: (1) Results from variational quantum eigensolver (VQE) simulations searching for optimal parameters allowing parametrized quantum circuits to prepare approximations to ground states of different Anderson impurity models (AIMs) (2) Results from simulations of a quantum Lanczos algorithm (QLA) estimating the Lanczos coefficients defining the continued-fraction representation of an (AIM) Green’s function Description: Any file named vqe_gs_results* stores approximations to the ground state and energy of a given AIM estimated using three different methods: (1) Numerical diagonalization (2) Ideal VQE simulation (3) VQE simulation with sampling noise For each VQE simulations metadata about the optimization (optimization results plus number of quantum circuits that would have been executed on real hardware) is also stored. Any file named qla_dos_results* estimations for the Lanczos coefficients defining the Green’s function of an AIM. The stored estimations are achieved using different methods: (1) Numerical Lanczos algorithm from initial states obtained from numerical diagonalization (2) Simulated quantum Lanczos algorithm from initial states prepared from parametrized quantum circuits yielded by corresponding ideal and noisy VQE subroutines. The dataset is used and described in M. Karabin et al., "Quantum solver for single-impurity Anderson models with particle-hole symmetry", Phys. Rev. Research 8, 033066 (2026). DOI: https://doi.org/10.1103/7ys3-tl4l

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

STILGAR Seismic Array Data

Two three-component dense seismic arrays were deployed above an active limestone mine in Pleasant Gap, Pennsylvania; one in the fall and one in the spring of 2023. Each campaign lasted approximately four weeks and included 80 to 100 seismic stations with stations spaced between 100 and 400 meters apart. Each campaign also included several small dense seismic arrays. Two types of seismic stations were deployed including FairfieldNodal ZLand 3C All-in-One seismometers and Geospace 3C GS-ONE geophone paired with GSX3 and GSX4 dataloggers. This dataset includes ~ 4 TB of three-component continuously recorded seismic data in the miniseed format data from both campaigns as well as a readme file for the data structure.

58 GEOSCIENCES↗
DOE OSTI2025

Sub-Nanosecond, Room-Temperature, Mid-IR Fe:ZnSe Gain-Switched Laser: Experimental Characterization and Modeling

We present the modeling and experimental characterization of a room-temperature, sub-nanosecond, gain-switched (GS) Fe:ZnSe laser operating at 4.4–4.8 μm. As pump sources, we used a 2.79 µm Q-switched Cr:Er:YSGG laser with a pulse duration of 52 ns and the 2.98 μm idler of a Nd:YAG pumped KTA-OPO system with a pulse duration of 9 ns. The shortest pulse durations were measured to be 1.4 ns and 0.7 ns under excitation by the Cr:Er:YSGG laser and KTA-OPO system, respectively. The developed Fe:ZnSe laser model showed good agreement with the experimental results. Optimization of the laser parameters based on model simulations suggests that an Fe:ZnSe microchip laser configuration could be achieved with a pulse duration of ~250 ps and an efficiency of ~20%.

Ghimire, Saugat↗
NASA NTRS1973

Ocean water color assessment from ERTS-1 RBV and MSS imagery

The author has identified the following significant results. Photo-optical and electronic density slicing were applied to ERTS-1 E 1007-151651-4, 30 July 1972, an area in the Caribbean showing deep ocean water, and shallow areas on the Great Baham Bank ranging from 0.5 meter or less to 18 meters. The density slicing processes were adjusted to correlate water radiance to bathmetric contours shown on C and GS Chart 1112. A number of large areas corresponding to water depths of 2 meters or less, 5 to 10 meters, and 10 to about 20 meters were isolated by both processes. Where clear water and uniformly reflective bottom was found, clear of marine growths, the photo-optical and electronic image density slicing processes proved effective in delineating areas where the depth was in the order of 5 meters, plus or minus 1 meter.

Ross, D. S.↗