Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “GOLD ALLOY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Nucleation process in Cu{sub 3}Au(001) surface region around the order-disorder phase transition

The element distribution in the Cu{sub 3}Au(001) surface region has been determined on the basis of directional Auger electron spectroscopy polar profiles measurements and interpreted in the frame of thermodynamic approach formulated for the inhomogeneous systems by using the Neel sublattices concept. Both approaches, experimental and theoretical, allowed us to present the temperature dependence of element concentration in a layer resolved mode. The wide temperature range explored in the experiment ensured the large data base for the theoretical analysis which enabled us to propose the distribution of intra-layer and inter-layer pairwise interactions leading to proper temperature dependence of segregation profiles in the surface region. This kind of interaction distribution can be understood as strain induced.

36 MATERIALS SCIENCE↗

Au-Ag Alloy Static High Pressure EOS measurements: FY09 summary of results

Static high-pressure measurements of the equation of state of a Gold-Silver alloy (23.5 wt-% Ag) at room temperature were performed up to a pressure of approximately 100 GPA (1 megabar). Measurements were made using an energy-dispersive x-ray diffraction method. The data was analyzed, yielding crystal structure lattice constants and volume/density as a function of pressure. The results are extremely precise yielding accuracy of better than 1%. The experiments were carried out at the HPCAT 16BM-D beamline at the Advanced Photon Source. Two experiments on separate samples were carried out using conventional membrane diamond anvil cells. To achieve hydrostatic conditions, we loaded a 50-100 micron piece of the Au-Ag alloy into the cell and surrounded it with neon and mineral oil pressure media in the respective experiments. The differing pressure media demonstrated no measurable difference on the resultant crystal structures, lattice constants or pressure-volume curves. Results of our work are shown in the figures below. Up to the maximum pressure of 100 GPa the sample remained in the face-centered cubic structure, e.g., we observed no change in crystal structure. EOS curves of silver and gold, taken from the literature, are shown for comparison. We fit our data to a Vinet EOS functional form, and the parameters for this EOS were found to be, Reference (ambient pressure) volume, V{sub 0} = 16.965435 {angstrom}{sup 3}; Reference (ambient pressure) density, {rho}{sub 0} = 16.14584 g/cm{sup 3}; Bulk Modulus, K{sub 0} = 144 GPa; and Bulk Mod Derivative, K{prime}{sub 0} = 5.66. As one might expect the Au-Ag alloy lies between the gold and silver EOS curves, and tracks more closely to the gold EOS. These data are useful in validating and developing predictive EOS models of the pressure-dependent behavior of Au-Ag alloys.

36 MATERIALS SCIENCE↗

Investigation of metallic and metallic glass hollow spheres for fusion target application

The first successful formation of submillimeter and millimeter spherical shells of tin and of a gold-lead-antimony alloy by means of the hollow-jet instability technique developed by Kendall is reported. Examination of tin specimens by SEM reveals that surface quality varies from poor to excellent. Whereas the metal is employed only as a convenient and inexpensive material, the gold alloy is important in that it is hard, has a high atomic number, and may be solidified into the amorphous state through the provision of a modest cooling rate. AuPbSb spherules up to 1.5 mm in diameter are produced using LN2 or chilled methanol as a coolant. It is found that these amorphous samples possess a superb surface smoothness compatible with fusion target requirements. It is noted that hollow spheres currently made of this alloy have an average outside diameter of 2000 microns.

Lee, M. C.↗

Containerless low gravity processing of glass forming and immiscible alloys

Under normal one-g conditions immiscible alloys segregate extensively during solidification due to sedimentation of the more dense of the immiscible liquid phases. Immiscible (hypermonotectic) gold-rhodium alloys were processed in the 100 meter drop tube under low gravity, containerless conditions to determine the feasibility of producing dispersed structures. Three alloy compositions were utilized. Alloys containing 10 percent by volume of the gold-rich hypermonotectic phase exhibited a tendency for the gold-rich liquid to wet the outer surface of the samples. This wetting tendency led to extensive segregation in several cases. Alloys containing 80 and 90 percent by volume of the gold-rich phase possessed completely different microstructures from the 10 percent samples when processed under low-g, containerless conditions. Several samples exhibited microstructures consisting of well dispersed 2 to 3 microns diameter rhodium-rich spheres in a gold-rich matrix.

Andrews, J. Barry↗

Structure and magnetic properties of the REAuBi{sub 2} (RE=La–Nd, Sm) phases

We present the crystal structures and basic magnetic properties of the REAuBi{sub 2} (RE=La–Nd, Sm) compounds. This isostructural family crystallizes in the tetragonal P4/nmm (no. 129) HfCuSi{sub 2}-type, as determined by single crystal X-ray diffraction. Three distinct substructures are present: an RE layer, a tetrahedral AuBi layer, and a Bi square net layer. Electronic structure calculations indicate that these compounds display bands which cross the Fermi level, derived from both the Bi square net and the covalent AuBi layer. The small size of LaAuBi{sub 2} crystals precluded detailed physical property measurements, whereas large single crystals could be grown for all other phases investigated here. Single crystal measurements of CeAuBi{sub 2}, PrAuBi{sub 2}, and NdAuBi{sub 2} show overall antiferromagnetic ordering and decreasing magnetic anisotropy with decreasing rare earth size. SmAuBi{sub 2} also shows signatures of magnetic ordering. - Graphical abstract: The crystal structures and basic electronic and magnetic properties of the five REAuBi{sub 2} (RE=La–Nd, Sm) phases are presented. These tetragonal structures have alternating layers of AuBi{sub 4} tetrahedra and a Bi square net balanced by RE cations. Measurements performed on single crystals show strong magnetic anisotropy for CeAuBi{sub 2} and PrAuBi{sub 2} and weak anisotropy for NdAuBi{sub 2}. SmAuBi{sub 2} is weakly magnetic. - Highlights: • We present the structures and basic properties of single crystals of the new, tetragonal REAuBi{sub 2} (RE=La–Nd, Sm) phases. • CeAuBi{sub 2}, PrAuBi{sub 2}, NdAuBi{sub 2}, and SmAuBi{sub 2} order magnetically. • CeAuBi{sub 2} and PrAuBi{sub 2} display magnetic anisotropy. • CeAuBi{sub 2} appears analogous to CeAuSb{sub 2} and may be worthy of further study as a potential system for quantum criticality.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Magnetic susceptibilities of liquid Cr-Au, Mn-Au and Fe-Au alloys

The magnetic susceptibility of liquid Cr-Au, Mn-Au, Fe-Au and Cu-Au alloys was investigated as a function of temperature and composition. Liquid Cr{sub 1-c}Au{sub c} with 0.5 ≤ c and Mn{sub 1-c}Au{sub c} with 0.3≤c obeyed the Curie-Weiss law with regard to their dependence of χ on temperature. The magnetic susceptibilities of liquid Fe-Au alloys also exhibited Curie-Weiss behavior with a reasonable value for the effective number of Bohr magneton. On the Au-rich side, the composition dependence of χ for liquid TM-Au (TM=Cr, Mn, Fe) alloys increased rapidly with increasing TM content, respectively. Additionally, the composition dependences of χ for liquid Cr-Au, Mn-Au, and Fe-Au alloys had maxima at compositions of 50 at% Cr, 70 at% Mn, and 85 at% Fe, respectively. We compared the composition dependences of χ{sub 3d} due to 3d electrons for liquid binary TM-M (M=Au, Al, Si, Sb), and investigated the relationship between χ{sub 3d} and E{sub F} in liquid binary TM-M alloys at a composition of 50 at% TM.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Deposition and characterization of far-infrared absorbing gold black films

A process is described for producing gold black films with high absorptance in the far IR. The optical and electrical properties of these films have been studied with particular emphasis on the absorptance of films at wavelengths as long as 50 microns. A substantial decrease in absorptance near 50 microns has been observed for pure gold black films on aging in air. This degradation can be largely avoided by alloying the gold with a small percentage of copper during the deposition. Preliminary results on two methods for delineating gold black films are also presented.

Advena, Donna J.↗

The radiation instability of thermally stable nanocrystalline platinum gold

Here, recent experimentally validated alloy design theories have demonstrated nanocrystalline binary alloys that are stable against thermally induced grain growth. An open question is whether such thermal stability also translates to stability under irradiation. In this study, we investigate the response to heavy ion irradiation of a nanocrystalline platinum gold alloy that is known to be thermally stable from previous studies. Heavy ion irradiation was conducted at both room temperature and elevated temperatures on films of nanocrystalline platinum and platinum gold. Using scanning/transmission electron microscopy equipped with energy-dispersive spectroscopy and automated crystallographic orientation mapping, we observe substantial grain growth in the irradiated area compared to the controlled area beyond the range of heavy ions, as well as compositional redistribution under these conditions, and discuss mechanisms underpinning this instability. These findings highlight that grain boundary stability against one external stimulus, such as heat, does not always translate into grain boundary stability under other stimuli, such as displacement damage.

36 MATERIALS SCIENCE↗

Adsorption Properties of Au−Ni Surface Alloys with a Nonstoichiometric Moiré Structure: A Density Functional Theory Study

Due to the large lattice mismatch between gold and nickel, gold–nickel surface alloys can form unique nonstoichiometric overlayer structures characterized by a moiré pattern and subsurface defects. For this work, we performed density functional theory (DFT) calculations to study the adsorption of molecular oxygen, atomic hydrogen, and atomic carbon on a gold–nickel(111) surface alloy with 0.46 monolayer gold randomly distributed in the surface layer. We observed six distinct adsorption structures for molecular oxygen characterized by intramolecular stretching frequencies of <700, 729, 795, 857, 929, and 1004 cm –1 , which describe well the experimentally observed high-resolution electron energy-loss spectra. Surface atomic hydrogen adsorption is associated with adsorbate–surface modes in the ∼1000 cm –1 range, while subsurface hydrogen can have features as low as ∼400 cm –1 . We observed a unique adsorption structure for atomic carbon inside the surface dislocation loop defect, which explains the experimentally observed low carbon-surface mode at ∼340 cm –1 . Our study sheds light on the unique adsorption properties of the gold–nickel surface alloys and helps with rationalizing vibrational frequency experimental studies for this system.

adsorption↗

(Ca/Sr)Au{sub x}Cd{sub 1-x}: Stacking variants of the CrB-FeB series

The structural chemistry of binary 1:1 alkaline earth metallides A{sup II}M (M=p-block or late transition element) is dominated by planar M zig-zag chains, which are stacked in different orientations (CrB (c) to FeB (h) type) and with variable stacking distances (types I and II). As a case study of the electronic influences, the substitution of Au against Cd in the respective Ca and Sr aurides was examined by means of experimental, crystallographic and computational methods. Starting from CaAu, up to 11% of Au can be substituted by Cd without a change in the CrB structure type (orthorhombic, space group Cmcm, a=398.2(1), b=1122.6(6), c=460.9(2)pm, Z=4, R1=0.0303). Starting from SrAu (stacking sequence (hc){sub 2}(h{sub 2}c){sub 2}), depending on the proportion of the Cd substitution a successive change to structures with increased hexagonality is observed: In SrAu{sub 0.93}Cd{sub 0.07} (monoclinic, space group P2{sub 1}/m, a=621.3(4), b=472.4(2), c=1216.1(9)pm, beta=96.97(5){sup 0}, Z=6, R1=0.0467) the stacking sequence is h{sub 2c}, i.e. the hexagonality is 66.67%. A slightly more increased Cd content in SrAu{sub 0.78}Cd{sub 0.22} (orthorhombic, space group Pnma, a=3243.3(8), b=474.17(8), c=626.20(9)pm, Z=16, R1=0.0682) drives the hexagonality to 75%, with a (h{sub 3}c){sub 2} stacking sequence known from several rare earth nickel compounds. Further Cd substitution is not possible. However, in the Cd-rich section of the two series, where the CsCl/beta-brass structure type occurs for both alkaline earth elements, a small Au substitution, as determined from powder data by Rietveld refinements, is possible. The substitution limit and the stability ranges of the CsCl and the CrB type can be rationalized from the calculated band structures. Geometrical and electronic criteria are used to compare and discuss the stability ranges in a structural map. - SrAu{sub 0.93}Cd{sub 0.97}, one of the stacking sequences of the CrB/FeB structure type series found in the quasibinary section SrAu-SrCd.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of Palladium Content, Quaternary Alloying, and Thermomechanical Processing on the Behavior of Ni-Ti-Pd Shape Memory Alloys for Actuator Applications

The need for compact, solid-state actuation systems for use in the aerospace, automotive, and other transportation industries is currently driving research in high-temperature shape memory alloys (HTSMA) having transformation temperatures above 100 C. One of the basic high temperature systems under investigation to fill this need is NiTiPd. Prior work on this alloy system has focused on phase transformations and respective temperatures, no-load shape memory behavior (strain recovery), and tensile behavior for selected alloys. In addition, a few tests have been done to determine the effect of boron additions and thermomechanical treatment on the aforementioned properties. The main properties that affect the performance of a solid state actuator, namely work output, transformation strain, and permanent deformation during thermal cycling under load have mainly been neglected. There is also no consistent data representing the mechanical behavior of this alloy system over a broad range of compositions. For this thesis, ternary NiTiPd alloys containing 15 to 46 at.% palladium were processed and the transformation temperatures, basic tensile properties, and work characteristics determined. However, testing reveals that at higher levels of alloying addition, the benefit of increased transformation temperature begins to be offset by lowered work output and permanent deformation or "walking" of the alloy during thermal cycling under load. In response to this dilemma, NiTiPd alloys have been further alloyed with gold, platinum, and hafnium additions to solid solution strengthen the martensite and parent austenite phases in order to improve the thermomechanical behavior of these materials. The tensile properties, work behavior, and dimensional stability during repeated thermal cycling under load for the ternary and quaternary alloys were compared and discussed. In addition, the benefits of more advanced thermomechanical processing or training on the dimensional stability of these alloys during repeated actuation were investigated. Finally, the effect of quaternary alloying on the thermal stability of NiTiPdX alloys is determined via thermal cycling of the materials to increasing temperatures under load. It was found that solid solution additions of platinum and gold resulted in about a 30 C increase in upper use temperature compared to the baseline NiTiPd alloy, providing an added measure of over-temperature protection.

Bigelow, Glen↗

First Results From A Multi-Ion Beam Lithography And Processing System At The University Of Florida

The University of Florida (UF) have collaborated with Raith to develop a version of the Raith ionLiNE IBL system that has the capability to deliver multi-ion species in addition to the Ga ions normally available. The UF system is currently equipped with a AuSi liquid metal alloy ion source (LMAIS) and ExB filter making it capable of delivering Au and Si ions and ion clusters for ion beam processing. Other LMAIS systems could be developed in the future to deliver other ion species. This system is capable of high performance ion beam lithography, sputter profiling, maskless ion implantation, ion beam mixing, and spatial and temporal ion beam assisted writing and processing over large areas (100 mm2)--all with selected ion species at voltages from 15-40 kV and nanometer precision. We discuss the performance of the system with the AuSi LMAIS source and ExB mass separator. We report on initial results from the basic system characterization, ion beam lithography, as well as for basic ion-solid interactions.

36 MATERIALS SCIENCE↗

Nanoporous Pt(Au) Alloys for the Enhanced, Non–enzymatic Detection of Hydrogen Peroxide under Biofouling Conditions

The non-enzymatic electrochemical sensing of hydrogen peroxide (H 2 O 2 ) is described. This study utilized a 3D bicontinuous nanoporous platinum-gold alloy-based sensor (NP-Pt(Au) electrode), which has a morphology that resembles a molecular sieve. SEM and CV were used to evaluate the morphological and electrochemical characteristics of the NP-Pt(Au) electrodes. The cathodic voltammetric response of H 2 O 2 was enhanced at the NP-Pt(Au) as compared to planar Pt electrodes. Further, the nanoporous electrode was able to maintain the H 2 O 2 voltammetric profile even in the presence of the biofouling agent, serum albumin. Its application as a non-enzymatic sensor for the amperometric measurement of H 2 O 2 was explored.

36 MATERIALS SCIENCE↗

Compatibility of Au-Cu-Ni braze alloy with NH3

Tests show that Gold-Copper-Nickel alloy is compatible with ammonia systems. Joining tubes by brazing has advantages such as reducing chances of excessive grain growth in base metal, saving weight, and cleanliness.

Diaz, V., Jr.↗

Contact formation in gallium arsenide solar cells

Gold and gold-based alloys, commonly used as solar cell contact materials, are known to react readily with gallium arsenide. Experiments were performed to identify the mechanisms involved in these GaAs-metal interactions. It is shown that the reaction of GaAs with gold takes place via a dissociative diffusion process. It is shown further that the GaAs-metal reaction rate is controlled to a very great extent by the condition of the free surface of the contact metal, an interesting example of which is the previously unexplained increase in the reaction rate that has been observed for samples annealed in a vacuum environment as compared to those annealed in a gaseous ambient. A number of other hard-to-explain observations, such as the low-temperature formation of voids in the gold lattice and crystallite growth on the gold surface, are explained by invoking this mechanism.

Weizer, Victor G.↗

Spin correlations and electron transport in MnBi:Au films

The structural, magnetic, and electron transport properties of Mn{sub 55-x}Au{sub x}Bi{sub 45} (x = 0, 4.5) thin films prepared by magnetron sputtering have been investigated. The magnetization of the MnBi films decreases and the coercivity increases due to Au doping. The temperature dependence of resistivity between 2 to 300 K shows that the films are metallic but the 4.5% Au-doped film shows a Kondo behavior with resistance minimum at 10.2 K. The magnetoresistance is anisotropic and the positive transverse magnetoresistance is significantly enhanced (16.3% at 70 kOe) by Au doping. We interpret these data in terms of a model in which Au atoms preferentially substitute for Mn atoms on the Mn lattice, and some Mn atoms are displaced to interstitial sites in the NiAs structure. These interstitial Mn atoms are coupled antiferromagnetically to the Mn atoms on the original Mn lattice leading to the large decrease in magnetization, Kondo effect, and the positive magnetoresistance.

36 MATERIALS SCIENCE↗