SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Cupriavidus basilensis SRS was isolated from stream sediments from the Savannah River Site in South Carolina. Here, we report the draft genome sequence and annotation of Cupriavidus basilensis SRS. The genome contains 8,918,236 bp and 7,916 predicted protein-coding genes, with a total G+C content of 65.2%.
Numerical modeling was Undertaken to analyze the influence of both radial and axial thermal gradients on convection patterns and velocities claiming solidification of pure Al and an Al-4 wt% Cu alloy. The objective of the numerical task was to predict the influence of convective velocity on an insoluble particle near a solid/liquid (s/l) interface. These predictions were then be used to define the minimum gravity level (q) required to investigate the fundamental physics of interactions between a particle and a s/l interface. This is an ongoing NASA founded flight experiment entitled "particle engulfment and pushing by solidifying interfaces (PEP)". Steady-state calculations were performed for different gravity levels and orientations with respect to the gravity vector The furnace configuration used in this analysis is the quench module insert (QMI-1) proposed for the Material Science Research Facility (MSRF) on board the International Space Station (ISS). The general model of binary alloy solidification was based on the finite element code FIDAP. At a low g level of 10(exp -4) g(sub o) (g(sub o) = 9.8 m/square s) maximum melt convection was obtained for an orientation of 90 deg. Calculations showed that even for this worst case orientation the dominant forces acting on the particle are the fundamental drag and interfacial forces.
A program began ten years ago to build a turbulence model to describe high Reynolds numbers flows. Specifically, the aim was to devise a model that would satisfy two basic conditions: reproduce available turbulence data (laboratory, numerical simulations, etc.) concerning shear driven flows, buoyancy driven flows, 2D turbulence, freely decaying turbulence etc., and yet be manageable so as to be used, for example, in GCM'S. The model was presented in a series of papers that have appeared in Physics of FLuids since 1996. A total of about 80 turbulence statistics were reproduced. The model has no adjustable parameters. The next step was to apply the model to construct the vertical diffusivities K for moment K(sub m), temperature K(sub h), salt K(sub g) and passive scalars K(sub c). First, we took K(sub g) = K(sub h) and tested the model using the Geophysical Fluid Dynamics Laboratory (GFDL) ocean model. The results for the profiles of T and S vs. depth are indistinguishable from those derided using the latest model, the KPP model by the NCAR group. Presently, we are running the same GFDL code relaxing the assumptive K(sub g) = K(sub h). Indeed, the turbulence model yields a salt diffusivity that depends on Ri and R Rho (= Beta Sigma S/Sigma z/Alpha Sigma T/Sigma z) in such a way that K(sub g) may be quite different from K(sub h). Salt fingers and double diffusivity laboratory data are reproduced. Results from the ocean model will be available shortly. Finally, we are trying to derive the horizontal diffusivities with the goal of providing a physically acceptable representation of mesoscale eddies. The recently suggested GMW parameterization has improved several O-GCM results and the goal here is to try to derive/justify it from a turbulence model and/or propose improvements/modifications. Theoretical work is in progress.
Transmission system with degradation of binary coded data due to bit errors
Self-concatenated trellis coded modulation with b(q-1) interleavers is a concatenated coded scheme based on only one rate bq/n convolutional code.
Soft-input soft-output building blocks (modules) are presented to construct and iteratively decode in a distributed fashion code networks, a new concept that includes, and generalizes, various forms of concatenated coding schemes.
Extension, modification and analysis of Gorenstein-Zierler decoding algorithm for binary codes of Bose, Ray-Chaudhuri and Hocquenghem /BCH/ correcting erasures and errors
Nonlinear-tapered flexbeam specimens from a full-size composite helicopter rotor hub flexbeam were tested under combined constant axial tension and cyclic bending loads. Two different graphite/glass hybrid configurations tested under cyclic loading failed by delamination in the tapered region. A 2-D finite element model was developed which closely approximated the flexbeam geometry, boundary conditions, and loading. The analysis results from two geometrically nonlinear finite element codes, ANSYS and ABAQUS, are presented and compared. Strain energy release rates (G) associated with simulated delamination growth in the flexbeams are presented from both codes. These results compare well with each other and suggest that the initial delamination growth from the tip of the ply-drop toward the thick region of the flexbeam is strongly mode II. The peak calculated G values were used with material characterization data to calculate fatigue life curves for comparison with test data. A curve relating maximum surface strain to number of loading cycles at delamination onset compared well with the test results.
This document presents a use attainability analysis (UAA) for the perennial segment of Upper Sandia Canyon, which is located within the Los Alamos National Laboratory (LANL) property near Los Alamos, New Mexico.1 This UAA is consistent with 20.6.4.15 New Mexico Administrative Code (NMAC) (New Mexico Environment Department [NMED] 2011c), which describes the perennial segment as “Sandia Canyon from Sigma Canyon upstream to LANL [National Pollutant Discharge Elimination System] NPDES outfall 001.” The perennial segment’s designated uses are coldwater aquatic life, livestock watering, wildlife habitat, and secondary contact. 40 Code of Federal Regulations (CFR) § 131.10(g) permits a state to remove a designated use that is not an existing use (as defined in 40 CFR §131.3), if a UAA demonstrates that naturally occurring pollutant concentrations prevent the attainment of the use or if physical conditions related to the natural features of the water body preclude the attainment of the aquatic life protection use. This UAA considers whether natural physical conditions in Upper Sandia Canyon, specifically air and/or water temperatures, prevent the designated aquatic life use water temperature limits (i.e., coldwater) from being attained in the perennial segment. The weight of evidence presented in this UAA supports the conclusion that, based on air-water temperature modeling and instream thermograph data, the coolwater aquatic life designated use is currently the attainable use. Accordingly, it is recommended that the coolwater aquatic life designated use replace the coldwater aquatic life designated use in the Upper Sandia Canyon assessment unit (AU).
High energy neutron transport calculated using one dimensional discrete ordinates code with anisotropic scattering, comparing results with nucleon transport code calculations
A rather general computer code has been developed for the numerical solution of the laminar boundary layer and thin shock layer (stagnation point only) equations for a multi-component gas mixture with finite reaction rates. The purpose of this paper is to indicate the capabilities of this computer program by presenting solutions for pure air flows and flows with carbon ablation. At the body surface the effects of oxidation and sublimation of carbon are taken into account with the following species included in the gas model: 0 2 , N 2 , O, N, NO, NO + , C 1 , C 2 , C 3 , CN, CO, and CO 2 . Results for the boundary layer along a 10° half-angle hyperboloid with ablation of carbon are compared to pure air results. Shock layer results for several wall temperatures and altitudes are presented and compared to pure air results. Other types of problems that can be solved with this computer code are indicated.
An illustrative embodiment of the invention includes apparatus which simultaneously produces both direct delta modulation and pulse code modulation. An input signal, after amplification, is supplied to a window comparator which supplies a polarity control signal to gate the output of a clock to the appropriate input of a binary up-down counter. The control signals provide direct delta modulation while the up-down counter output provides pulse code modulation.
The use of digital techniques for transmission of pictorial data is discussed for multi-frame images (television). Video signals are processed in a manner which includes quantization and coding such that they are separable from the noise introduced into the channel. The performance of digital television systems is determined by the nature of the processing techniques (i.e., whether the video signal itself or, instead, something related to the video signal is quantized and coded) and to the quantization and coding schemes employed.
A description of an improved version of the NASA/Lockheed multielement airfoil analysis computer program is presented. The improvements include several major modifications of the aerodynamic model as well as substantial changes of the computer code. The modifications of the aerodynamic model comprise the representation of the boundary layer and wake displacement effects with an equivalent source distribution, the prediction of wake parameters with Green's lag-entrainment method, the calculation of turbulent boundary layer separation with the method of Nash and Hicks, the estimation of the onset of confluent boundary layer separation with a modified form of Goradia's method, and the prediction of profile drag with the formula of Squire and Young. The paper further describes the modifications of the computer program for which the structured approach to computer software development was employed. Important aspects of the structured program development such as the functional decomposition of the aerodynamic theory and its numerical implementation, the analysis of the data flow within the code, and the application of a pseudo code are discussed.
A description of an improved version of the NASA/Lockheed multi-element airfoil analysis computer program is presented. The improvements include several major modifications of the aerodynamic model as well as substantial changes of the computer code. The modifications of the aerodynamic model comprise the representation of the boundary layer and wake displacement effects with an equivalent source distribution, the prediction of wake parameters with Green's lag-entrainment method, the calculation of turbulent boundary layer separation with the method of Nash and Hicks, the estimation of the onset of confluent boundary layer separation with a modified form of Goradia's method, and the prediction of profile drag with the formula of Squire and Young. The modifications of the computer program for which the structured approach to computer software development was employed are also described. Important aspects of the structured program development such as the functional decomposition of the aerodynamic theory and its numerical implementation, the analysis of the data flow within the code, and the application of a pseudo code are discussed.
It is pointed out that transonic flow is one of the fields where computational fluid dynamics turns out to be most effective. Codes for the design and analysis of supercritical airfoils and wings have become standard tools of the aircraft industry. The present investigation is concerned with mathematical models and theorems which account for some of the progress that has been made. The most successful aerodynamics codes are those for the analysis of flow at off-design conditions where weak shock waves appear. A major breakthrough was achieved by Murman and Cole (1971), who conceived of a retarded difference scheme which incorporates artificial viscosity to capture shocks in the supersonic zone. This concept has been used to develop codes for the analysis of transonic flow past a swept wing. Attention is given to the trailing edge and the boundary layer, entropy inequalities and wave drag, shockless airfoils, and the inverse swept wing code.
A new algorithm has been developed for hypervelocity flows in chemical equilibrium. Solutions have been achieved for Mach numbers up to 15 with no adverse effect on convergence. Two methods of coupling an equilibrium chemistry package have been tested, with the simpler method proving to be more robust. Improvements in boundary conditions are still required for a production-quality code.
The present sensitivity study of design variable effects on the performance of a monogroove-with-screen heat pipe obtains performance curves for maximum heat-transfer rates vs. operating temperatures by means of a computer code; performance projections for both 1-g and zero-g conditions are obtainable. The variables in question were liquid and vapor channel design, wall groove design, and the number of feed lines in the evaporator and condenser. The effect on performance of three different working fluids, namely ammonia, methanol, and water, were also determined. Greatest sensitivity was to changes in liquid and vapor channel diameters.