Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Fourier Transform Infrared Spectroscopy (FTIR)”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Ammonia Electrosynthesis from Nitrate Using a Ruthenium–Copper Cocatalyst System: A Full Concentration Range Study

Electrochemical synthesis of ammonia via the nitrate reduction reaction (NO3RR) has been intensively researched as an alternative to the traditional Haber–Bosch process. Most research focuses on the low concentration range representative of the nitrate level in wastewater, leaving the high concentration range, which exists in nuclear and fertilizer wastes, unexplored. The use of a concentrated electrolyte (≥1 M) for higher rate production is hampered by poor hydrogen transfer kinetics. Herein, we demonstrate that a cocatalytic system of Ru/Cu 2 O catalyst enables NO3RR at 10.0 A in 1 M nitrate electrolyte in a 16 cm 2 flow electrolyzer, with 100% faradaic efficiency toward ammonia. Detailed mechanistic studies by deuterium labeling and operando Fourier transform infrared (FTIR) spectroscopy allow us to probe the hydrogen transfer rate and intermediate species on Ru/Cu 2 O. Ab initio molecular dynamics (AIMD) simulations reveal that adsorbed hydroxide on Ru nanoparticles increases the density of the hydrogen-bonded water network near the Cu 2 O surface, which promotes the hydrogen transfer rate. Finally, our work highlights the importance of engineering synergistic interactions in cocatalysts for addressing the kinetic bottleneck in electrosynthesis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Geophysical Impacts and Spectroscopic Identification of a Hydrous Iron Sulfate on Icy Worlds

Over geologic time-scales, large volumes of exogenic sulfur ions from Io's plasma torus have been supplied to the surface of Europa and Ganymede, which, combined with recent interpretations of orbiter images, dynamical modeling, and surface-subsurface exchange, suggests further sulfur transport into the interior of the icy worlds. These observations motivate mixed-phase spectral modeling for interpreting orbiter spectroscopy data and determination of hydration states of candidate surface materials including hydrous sulfates. In this work, we present a combined experimental and theoretical study of the low temperature and high pressure vibrational spectral signature of the iron-sulfate monohydrate endmember, szomolnokite (FeSO 4 ·H 2 O). By employing synchrotron Fourier-transform infrared spectroscopy (FTIR) in the diamond anvil cell up to 23 GPa and down to 20 K, we explore the extreme range of pressure-temperature domains relevant to icy environments throughout our solar system and beyond. Combined with our density-functional theory quantum-mechanics molecular dynamics results, we demonstrate that experimentally observed infrared features in the O-H stretching region commonly associated with nH 2 O (n > 1) hydration states can be attributed to a pure monohydrate without the need for pressure-induced exsolved ice, other coexisting hydrous iron sulfates, or strong overtone and combination modes. We further discuss the possibility of lateral variations in density and shear properties on icy worlds associated with temperature variations and the high-pressure phases of kieserite group monohydrated sulfates.

Geosciences↗
DOE OSTI2024

Highly confined epsilon-near-zero and surface phonon polaritons in SrTiO 3 membranes

Recent theoretical studies have suggested that transition metal perovskite oxide membranes can enable surface phonon polaritons in the infrared range with low loss and much stronger subwavelength confinement than bulk crystals. Such modes, however, have not been experimentally observed so far. Here, using a combination of far-field Fourier-transform infrared (FTIR) spectroscopy and near-field synchrotron infrared nanospectroscopy (SINS) imaging, we study the phonon polaritons in a 100 nm thick freestanding crystalline membrane of SrTiO 3 transferred on metallic and dielectric substrates. We observe a symmetric-antisymmetric mode splitting giving rise to epsilon-near-zero and Berreman modes as well as highly confined (by a factor of 10) propagating phonon polaritons, both of which result from the deep-subwavelength thickness of the membranes. Theoretical modeling based on the analytical finite-dipole model and numerical finite-difference methods fully corroborate the experimental results. Our work reveals the potential of oxide membranes as a promising platform for infrared photonics and polaritonics.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Bio-based oxalic acid production in Issatchenkia orientalis enables sustainable rare earth recovery

The growing demand for rare earth elements (REEs) in clean energy and high-tech industries underscores the need for sustainable recovery methods and a reliable supply of processing chemicals. Here, we establish a microbial platform using the acid-tolerant yeast Issatchenkia orientalis SD108 to produce bio-oxalic acid for REE recovery. By introducing an oxaloacetate cleavage pathway and applying metabolic engineering, the engineered strain produces 39.53 g·L -1 oxalic acid at pH 4.0 in fed-batch fermentation. The crude fermentation broth, used without purification, efficiently precipitates over 99% neodymium (Nd), 99% dysprosium (Dy), and 98% lanthanum (La) from individual REE chloride solutions. Recovery from a low-grade ore leachate achieves over 99% total recovery. X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR) confirm that REE oxalates precipitated with bio-oxalic acid closely resemble those obtained using commercial oxalic acid. Techno-economic analysis (TEA) and life cycle assessment (LCA) further demonstrate that bio-oxalic acid can be produced at a competitive price of $1.79·kg -1 while reducing carbon intensity (CI) by 112% to 63.5% with and without electricity displacement, respectively, relative to the fossil-based benchmark. These results highlight bio-oxalic acid as a green, economically viable alternative to synthetic oxalate for sustainable REE recovery.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

A study of degradation mechanisms in PVDF-based photovoltaic backsheets

Abstract Commercial backsheets based on polyvinylidene fluoride (PVDF) can experience premature field failures in the form of outer layer cracking. This work seeks to provide a better understanding of the changes in material properties that lead to crack formation and find appropriate accelerated tests to replicate them. The PVDF-based backsheet outer layer can have a different structure and composition, and is often blended with a poly(methyl methacrylate) (PMMA) polymer. We observed depletion of PMMA upon aging with sequential (MAST) and combined (C-AST) accelerated stress testing. In field-aged samples from Arizona and India, where PVDF crystallizes in its predominant α-phase, the degree of crystallinity greatly increased. MAST and C-AST protocols were, to some extent, able to replicate the increase in crystallinity seen in PVDF after ~ 7 years in the field, but no single-stress test condition (UV, damp heat, thermal cycling) resulted in significant changes in the material properties. The MAST regimen used here was too extreme to produce realistic degradation, but the test was useful in discovering weaknesses of the particular PVDF-based outer layer structure studied. No excessive β-phase formation was observed after aging with any test condition; however, the presence of β-phase was identified locally by Fourier transform infrared spectroscopy (FTIR). We conclude that both MAST and C-AST are relevant tests for screening outdoor failure mechanisms in PVDF backsheets, as they were successful in producing material degradation that led to cracking.

14 SOLAR ENERGY↗
DOE OSTI2024

Long-term, non-invasive FTIR detection of low-dose ionizing radiation exposure

Non-invasive methods of detecting radiation exposure show promise to improve upon current approaches to biological dosimetry in ease, speed, and accuracy. Here we developed a pipeline that employs Fourier transform infrared (FTIR) spectroscopy in the mid-infrared spectrum to identify a signature of low dose ionizing radiation exposure in mouse ear pinnae over time. Mice exposed to 0.1 to 2 Gy total body irradiation were repeatedly measured by FTIR at the stratum corneum of the ear pinnae. We found significant discriminative power for all doses and time-points out to 90 days after exposure. Classification accuracy was maximized when testing 14 days after exposure (specificity > 0.9 with a sensitivity threshold of 0.9) and dropped by roughly 30% sensitivity at 90 days. Infrared frequencies point towards biological changes in DNA conformation, lipid oxidation and accumulation and shifts in protein secondary structure. Since only hundreds of samples were used to learn the highly discriminative signature, developing human-relevant diagnostic capabilities is likely feasible and this non-invasive procedure points toward rapid, non-invasive, and reagent-free biodosimetry applications at population scales.

61 RADIATION PROTECTION AND DOSIMETRY↗
DOE OSTI2020

The importance of sulfonate to the self-doping mechanism of the water-soluble conjugated polyelectrolyte PCPDTBT-SO 3 K

The conjugated polyelectrolyte poly[2,6-(4,4-bis-potassium butanylsulfonate-4H-cyclopenta-[2,1-b;3,4-b']-dithiophene)-alt-4,7-(2,1,3-benzothiadiazole)] (PCPDTBTSO 3 K, or CPE-K) is part of a unique class of organic semiconducting polymers that are soluble in water and become doped in the presence of a proton source. One of these proton sources is water, which CPE-K is exposed to during purification by dialysis, allowing for its immediate use without an additional doping step. Previous studies have suggested that the actual dopant is H + , and that the addition of sodium hydroxide to CPE-K reverses the process and de-dopes the polymer. Curiously, the majority of these water-soluble self-doped polymers in the literature contain a pendant sulfonate group. However, a detailed study to gain insight into the importance of the sulfonate group in water-soluble self-doped polymer systems is lacking, despite its widespread presence in the literature. In this work, using Fourier-transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), and ultraviolet-visible-near infrared (UV-vis-NIR) absorption spectroscopy, we are able to elucidate the role of the pendant sulfonate group with regards to the fundamental doping mechanism of CPE-K. Specifically, we found the CPDT unit can be protonated by water, which is due to both the stabilizing influence of the sulfonate group, and the relatively high oxidation potential of the CPDT unit, both of which are required for self-doped water soluble polymer systems. Furthermore, we estimate the doping efficiency of CPE-K using electrical measurements and X-ray reflectivity (XRR), and reveal several different methods for the doping and de-doping of this material, showcasing this particular material's superior versatility.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Investigating the hydrolysis of cryogenically layered molybdenum hexafluoride through a disordered hydrogen-bonded network

Molybdenum hexafluoride (MoF6) is used as a non-radioactive substitute for uranium to study the hydrolysis of metal hexafluorides. Molybdenum hexafluoride gas and water vapor, from the air, were sequentially layered onto a diamond substrate kept at liquid nitrogen temperature using a custom designed cryogenic cell with a copper cold finger. Reaction progress was monitored by transmission Fourier Transform Infrared Spectroscopy (FTIR) through the layers and diamond substrate over several hours while allowing the substrate to warm. Changes in the modes in the 500–1000 cm -1 region are tracked as the reaction progresses in order to identify intermediate species. Strong absorption features are also observed in the 1000–3000 cm -1 range, suggesting the presence of ionic dissociation intermediates trapped in a disordered H-bonded network of cryogenic hydrofluoric acid. Here, a possible reaction pathway is proposed and the final hydrolysis product is characterized by FTIR, UV-vis, and scanning electron microscopy/energy dispersive X-ray spectroscopy (SEM/EDS).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Optimizing semi-hydrogenation of unsaturated hydrocarbons by electrolyte engineering approach

Electrochemical hydrogenation of unsaturated hydrocarbons, when powered by renewables, represents a unique opportunity to substitute current energy-intensive synthetic routes. Modulation of adsorption energies of the organic substrate and key intermediates of the reaction is critical for fine tuning of the yield, selectivity and kinetics of the reaction. Interestingly, mounting evidence exists regarding the role of electrolyte composition in the outcome of semi-hydrogenation reactions. Nevertheless, electrolyte optimization is a complex task, owing to its hybrid nature. Indeed, it is composed of water serving as a proton source, an organic solvent necessary to dissolve the organic substrate and a conducting salt. Herein, we demonstrate that varying conducting salt and organic solvent has a dramatic impact on the outcomes of semi-hydrogenation of alkynes. By varying salt and water concentrations, we demonstrate that water does not serve as a proton source, and instead addition of an acid is necessary. While increasing the acid concentration increases the yield of the reaction, at too large concentrations the hydrogen evolution reaction becomes predominant. Furthermore, by combining electrochemical measurements with spectroscopic techniques including Fourier transform infrared (FTIR) spectroscopy and small angle X-ray spectroscopy (SAXS), we demonstrate that the electrolyte solvation structure dramatically impacts the yield of the reaction. Organic solvents weakly interacting with water, including acetonitrile, form aqueous nanoheterogeneities that prevent the organic substrate from accessing the catalyst interface and thus lead to limited yields. Instead, solvents such as dimethylformamide form homogeneous mixtures with which all reactants can access the interface, leading to yields greater than 80% for optimized compositions.

Zhang, Rongyu↗
DOE OSTI2020

Application of end-of-shift respirable crystalline silica monitoring to construction

A pilot project was conducted to determine the effect of common construction dusts as interferences in a new portable end-of-shift (EoS), direct-on-filter (DoF) sampling and analysis method for respirable crystalline silica (RCS), in this case, quartz. Construction dusts were prepared from plaster, drywall, cement and brick by grinding, aerosolizing, and collecting respirable dust with high flow rate cyclones. Filters were loaded with different levels of commercial α-quartz powder Min-u-Sil 5, and different levels of interfering dusts, singly and in combination. Samples were analyzed by Fourier Transform Infrared Spectroscopy (FTIR). Good correlations were found between nominal quartz loading (0 µg, 25 µg, 50 µg, and 100 µg) adjusted for quartz in the interfering dust and FTIR absorbance alone and in the presence of all interfering dusts. The slopes of the correlations were similar whether the loading was quartz without interference, or with plaster, drywall, and cement dusts, regardless of quantity. The results show that (a) plaster and drywall dusts do not interfere substantially; (b) cement does not interfere, but a change in the intercept suggests an effect on the background absorbance of the filter; and (c) in addition to having a substantial quartz content, brick dust contains an additional material, probably a silicate mineral, which interferes with the quartz peak. Thus, the presence of cement leads to lower quartz values and brick leads to higher values, but overall, 83% of the quartz contents predicted from the calibration data agreed within 50% of the adjusted nominal loadings within the range 20–110 µg. This result is encouraging given the high levels of interfering dusts. Nine samples loaded with smaller amounts of all four dusts together gave results within 25% of the adjusted nominal loadings. A single mixture addition of the dusts to the filter gave tighter variance in results than sequential additions. Unexpectedly, the two Certified Reference Materials (CRMs) 1878a and 1878b, gave different results when used to calibrate XRD analysis of Min-u-Sil 5.

42 ENGINEERING↗
DOE OSTI2021

The preparation and properties of polyurethane foams reinforced with bamboo fiber sources in China

Abstract Polyurethane (PU) foams reinforced with bamboo fiber sources in China, i.e. , bamboo fiber, bamboo α -cellulose fiber, and bamboo nanocellulose fiber, were prepared and their physico-mechanical properties were analyzed in this work. The bamboo fiber sources and PU foams were characterized by Fourier transform infrared spectroscopy (FTIR), Scanning electron microscope (SEM), Thermal gravimetric analysis (TGA) and universal compression testing. The results indicated that the hydroxyl groups on the fiber surfaces were enhanced by removing non-celluloses in the preparation of α -cellulose and nanocellulose. With the addition of small particle size α -cellulose and nanocellulose, the cell sizes of PU foams were reduced due to more nucleating agents being introduced. The FTIR spectra confirmed that the bamboo fiber sources were involved in the foaming reaction. The PU foams with bamboo fiber sources had a higher thermal stability than neat foam, and they were satisfactory enough to be used as insulation. PU foams reinforced with 5% bamboo fiber, 3% α -cellulose fiber and 3% nanocellulose fiber had better physico-mechanical performance than other foams. The reinforcement performance of 3% bamboo α -cellulose fiber on PU foam was comparable with that of high-cost nanocellulose. Accordingly, bamboo α -cellulose fiber was demonstrated to be a promising candidate to reinforce PU foam, which could be used in the reinforcement of foam insulation.

Qiu, Chongpeng↗
DOE OSTI2021

Detection of diffusion limited oxidation in thermally aged ethylene propylene rubber cable insulation material

The lifetime prediction of electrical cable insulation in nuclear power plants (NPPs) is primarily based on accelerated aging. Polymeric insulation exposed to accelerated aging at high temperatures may demonstrate diffusion limited oxidation (DLO) where oxygen within the material is consumed faster than can be supplied by diffusion from the surrounding air. This situation leads to equilibrium oxidation at the exposed surfaces and limited oxidation away from the surfaces. Therefore, DLO results in a heterogeneously aged material which can lead to underestimation of lifetime for in-service cable insulation. In this study, the presence of inhomogeneous aging caused by DLO was evaluated on cross-sectioned cable insulation specimens made of ethylene propylene rubber (EPR). The studies were performed on thermally aged specimens (165 °C, 1 day and 165 °C, 16 days) using local measurement techniques including nanoindentation, micro-Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM) - energy dispersive spectroscopy (EDS). All the results indicate some degree of heterogenous aging, with 165 °C, 16 days, aging demonstrating highest degree of oxidative degradation on the inside edges presumably caused due to copper catalyzed oxidation.

Pallaka, Madhusudhan Reddy↗
DOE OSTI2021

Principal Component Analysis of Nuclear Cable Insulation Subjected to Elevated Temperature and Gamma Radiation

In nuclear power plants (NPPs), the aging of electrical cable insulation occurs due to elevated temperature, ionizing radiation, and other environmental factors. To ensure the safe and efficient operation of NPPs, determination of key indicators of cable aging is critical to predict the remaining useful lifetime of electrical cable insulation. In this work, the effects of simultaneous and sequential thermal and gamma radiation on the aging of cross-linked polyethylene (XLPE) electrical cable insulation are investigated. The chemical changes of the insulation were monitored non-destructively through the use of Fourier transform infrared (FTIR) spectroscopy. The FTIR spectra were measured stepwise after predetermined exposure intervals, with a total irradiation dose up to 320 kGy at a dose rate of 300 Gy/hr in two exposure scenarios; simultaneously aged samples were heated at 150 °C during irradiation, while sequentially aged samples were heated at 150 °C for designated durations followed by corresponding times of irradiation at ambient temperature. A data-driven approach using principal component analysis (PCA) was developed to highlight changes in the carbonyl region of the infrared spectra of the aged samples due to oxidation and to differentiate oxidation rates under the simultaneous and sequential exposure conditions. Findings indicate that the sequential aging scenario may be more conservative than the simultaneous aging scenario for XLPE electrical cable insulation.

Li, Donghui↗
DOE OSTI2024

Investigating the Crosslinking, Degradation, and Adhesion Behavior of Photovoltaic Encapsulants Under Thermal Accelerated Aging

Degradation of photovoltaic (PV) module encapsulant characteristics that lead to mechanical embrittlement and delamination remains a cause of failure in solar installations. A multiscale reliability model connecting the encapsulant mechanical and fracture properties to the degraded molecular structure and interfacial bonding to adjacent solar cell and glass substrates was previously published. The model, developed primarily for poly(ethylene-co-vinyl acetate) acetate (EVA) encapsulants, remains to be experimentally validated. Determining the degradation and crosslinking kinetics of alternative encapsulants, such as polyolefin elastomer (POE) and EVA/POE/EVA composites (EPE), can generalize the model. In this work, we subject fully cured EVA, POE, and EPE encapsulants to accelerated thermal aging to determine how high temperatures impact reaction kinetics. An increase in gel content (crosslinking) and decrease in crystallinity of the encapsulants under hot-aerobic (90 degrees C, 22% RH) and hot-anaerobic (90 degrees C, sealed in N 2 air) aging were observed, even in the absence of UV and crosslinking initiators. Fourier transform infrared spectroscopy (FTIR)-attenuated total reflectance analysis showed insignificant encapsulant degradation, demonstrating the critical role of UV and moisture in accelerating degradation. Adhesion testing performed on coupon-level specimens (cell/encapsulant/glass laminates) showed decreases in adhesion energy, Gc , from 5000 h of hot-dry (90 degrees C, ~1% RH) and hot-humid (90 degrees C, 60% RH) aging. POE coupons demonstrated the best stability, followed by EPE then EVA. For EVA and POE, hot-humid aged coupons experienced a larger decrease in Gc due to enhanced hydrolytic degradation. Hot-dry aging condition demonstrated that thermal degradation of the interface could be significant even if the encapsulant experiences negligible degradation in the absence of UV and elevated humidity.

accelerated aging↗
DOE OSTI2020

Correlation of Advanced Accelerated Stress Testing with Polyamide-Based Photovoltaic Backsheet Field-Failures

Cracking of polyamide (PA)-based photovoltaic (PV) backsheet materials has been widely reported for field-aged modules. Failure was not detected by conventional accelerated stress tests (ASTs), which lacked the necessary combination of stress factors and/or factor sequences. PA-based AAA backsheet cracking has since been reproduced through combined and sequential stress testing. Planar- and cross-sectional-optical microscopy as well as Fourier-transform Infrared Spectroscopy (FTIR), have been used to elucidate the mechanical and chemical changes which lead to failure of the backsheet. Field-aged backsheet samples demonstrating failure in various climates (including locations in China and Italy) are also analyzed. Through the analysis, a comparison is made between the different stress testing protocols and the field-aged samples to validate relevance of the advanced stress tests. It is shown that the changes induced through combined-accelerated stress testing (C-AST) were most representative of changes induced by the field, supporting the relevance of C-AST and providing validity for the test protocol.

14 SOLAR ENERGY↗
DOE OSTI2021

Evaluating Non-Fluoropolymer-Based Co-Extruded Backsheets Using Combined-Accelerated Stress Testing and Materials Forensics

Co-extruded, non-fluoropolymer backsheet films for photovoltaic (PV) modules have gained popularity in recent years based on their cost competitiveness. However, their viability has been thrown into question as a result of widespread, early-life field-failures of some materials, particularly the polyamide (PA)-based “AAA” backsheet product. Failure to detect weaknesses in those earlier products could be due, in part, to insufficient quality testing practices. New testing protocols have recently been developed to better evaluate such materials. Here we show the testing results for a non-fluoropolymer, co-extruded PA-based backsheet film, which demonstrates greater durability than AAA and some commercial fluoropolymers. Using material characterization techniques including Fourier-transform infrared spectroscopy (FTIR), wide-angle x-ray scattering (WAXS), differential scanning calorimetry (DSC), X-ray photoelectron spectroscopy (XPS), elongation-to-break (ETB), and optical microscopy we perform a comprehensive failure analysis to better understand the materials weaknesses. This analysis can ultimately inform how best to improve the material and extend its lifetime. This work serves as a demonstration that some materials should not be discounted due to a single poorly designed product and that more appropriate qualification testing with subsequent materials analysis can be used to develop better materials.

41 EE - Solar Energy Technologies Office (EE-4S)↗
DOE OSTI2022

Effects of soybean 7S protein on the quality and digestibility of dry rice noodles under twin‐screw extrusion process

Summary Starch and protein are important components of food, the mixed system formed between them (complexes, gels, mixtures, etc.) can improve the physical and chemical properties of starch and protein, and its potential application in the food industry has also attracted widespread attention. In this study, indica rice flour and soybean 7S protein (β‐Conglycinin) were used as the experimental materials to explore the effect of soybean 7S protein addition on the quality and digestibility of rice noodles. Aims to develop rice noodles with high protein and low GI, so that people can take care of their health while satisfying their appetites. The results showed that with the increase of soybean 7S protein addition, the starch digestibility decreased, resulting in the estimated glycaemic index (eGI) and glycaemic load (GL) decreasing. However, the cooking loss rate and breakage rate of rice noodles gradually increased, the water absorption first increased and then decreased, and the taste of rice noodles is acceptable when the 7S protein addition amount is within 9%. The interaction between starch and soybean 7S protein was mediated by weak interactions such as hydrogen bonds and hydrophobic forces indicated by Fourier transform infrared spectroscopy (FTIR) and X‐ray diffraction (XRD).

Qiao, Fan↗