Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Fluid instabilities”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Some effects of swirl on turbulent mixing and combustion

A general formulation of some effects of swirl on turbulent mixing is given. The basis for the analysis is that momentum transport is enhanced by turbulence resulting from rotational instability of the fluid field. An appropriate form for the turbulent eddy viscosity is obtained by mixing length type arguments. The result takes the form of a corrective factor that is a function of the swirl and acts to increase the eddy viscosity. The factor is based upon the initial mixing conditions implying that the rotational turbulence decays in a manner similar to that of free shear turbulence. Existing experimental data for free jet combustion are adequately matched by using the modifying factor to relate the effects of swirl on eddy viscosity. The model is extended and applied to the supersonic combustion of a ring jet of hydrogen injected into a constant area annular air stream. The computations demonstrate that swirling the flow could: (1) reduce the burning length by one half, (2) result in more uniform burning across the annulus width, and (3) open the possibility of optimization of the combustion characteristics by locating the fuel jet between the inner wall and center of the annulus width.

Rubel, A.↗
NASA NTRS1974

Structures in a non-magnetic solar corona

A fluid mechanical convective instability is examined under the conditions found in the solar corona. Linearized density perturbations are shown to grow as they are carried outward by the solar wind. The non-linear instability may be proposed as a cause of coronal structures in nonmagnetic stars, or in regions of the solar corona with weak magnetic fields.

Cross, M. A.↗
NASA NTRS1998

Rossby Waves in the Protoplanetary Nebula

Fluid waves and instabilities are considered critical to the evolution of protoplanetary nebulae, particularly for their roles in mass, angular momentum, and energy transport. A number have been identified, however, notably absent, is an influential wave commonly found in planetary atmospheres and oceans: the planetary Rossby wave (PRW). Since, in the Earth's atmosphere, the PRW is of primary importance in shaping large-scale meteorological phenomena, it is reasonable to consider whether it might have similar importance in the protoplanetary nebula. The thrust of the research project this summer (1998) was to determine whether a nebular analog to the PRW is viable, a so-called nebular Rossby wave (NRW), and if so, to explore possible ramifications of this wave to the evolution of the nebula. This work was carried out primarily by S. Davis, J. Cuzzi and me, with significant discussions with P. Cassen. We believe we have established a good case for the NRW and as a result believe we have opened up a new and possibly interesting line of research in regard to the nebular development, in particular with regard to zonal jet formation, a potent accretion mechanism, and possible ties to vortex formation. The standard model of the protoplanetary nebula consists of a large disk of gas with about 1% entrained dust gravitationally bound to a large central mass, m(sub c) i.e., the protostar. The planet-forming region of the disk extends to roughly 100 A.U. in radius. Disk thickness, H, is believed to be on the order of 10-100 times less than disk radius. Disk lifetime is on the order of a million years.

Sheehan, Daniel P.↗
NASA NTRS2002

An Experimental Investigation of Incompressible Richtmyer-Meshkov Instability

Richtmyer-Meshkov (RM) instability occurs when two different density fluids are impulsively accelerated in the direction normal to their nearly planar interface. The instability causes small perturbations on the interface to grow and eventually become a turbulent flow. It is closely related to Rayleigh-Taylor instability, which is the instability of a planar interface undergoing constant acceleration, such as caused by the suspension of a heavy fluid over a lighter one in the earth's gravitational field. Like the well-known Kelvin-Helmholtz instability, RM instability is a fundamental hydrodynamic instability which exhibits many of the nonlinear complexities that transform simple initial conditions into a complex turbulent flow. Furthermore, the simplicity of RM instability (in that it requires very few defining parameters), and the fact that it can be generated in a closed container, makes it an excellent test bed to study nonlinear stability theory as well as turbulent transport in a heterogeneous system. However, the fact that RM instability involves fluids of unequal densities which experience negligible gravitational force, except during the impulsive acceleration, requires RM instability experiments to be carried out under conditions of microgravity. This experimental study investigates the instability of an interface between incompressible, miscible liquids with an initial sinusoidal perturbation. The impulsive acceleration is generated by bouncing a rectangular tank containing two different density liquids off a retractable vertical spring. The initial perturbation is produced prior to release by oscillating the tank in the horizontal direction to produce a standing wave. The instability evolves in microgravity as the tank travels up and then down the vertical rails of a drop tower until hitting a shock absorber at the bottom. Planar Laser Induced Fluorescence (PLIF) is employed to visualize the flow. PLIF images are captured by a video camera that travels with the tank. Figure 1 is as sequence of images showing the development of the instability from the initial sinusoidal disturbance far into the nonlinear regime which is characterized by the appearance of mushroom structures resulting from the coalescence of baroclinic vorticity produced by the impulsive acceleration. At later times in this sequence the vortex cores are observed to become unstable showing the beginnings of the transition to turbulence in this flow. The amplitude of the growing disturbance after the impulsive acceleration is measured and found to agree well with theoretical predictions. The effects of Reynolds number (based on circulation) on the development of the vortices and the transition to turbulence are also determined.

Jacobs, J. W.↗
NASA NTRS1979

Sunspots and the physics of magnetic flux tubes. VI - Convective propulsion. VII - Heat flow in a convective downdraft

The effect of negative aerodynamic drag in an ideal fluid subject to convective instability is considered. It is shown that a cylinder moving in such a fluid is propelled forward in its motion by the convective forces and that the characteristic acceleration time is comparable to the onset time of convective motions in the fluid. It is suggested that convective propulsion plays an important role in the dynamics of flux tubes extending through the surface of the sun. The suppression of the upward heat flow in a Boussinesq convective cell with free upper and lower boundaries by a downdraft is then analyzed. Application to the solar convection zone indicates that downdrafts of 1 to 2 km/s at depths of 1000 to 4000 km beneath the visible surface of the sun are sufficient to reduce the upward heat flux to a small fraction of the ambient value.

Parker, E. N.↗
NASA NTRS1982

Instabilities of geared couplings: Theory and practice

The use of couplings for high speed turbocompressors or pumps is essential to transmit power from the driver. Typical couplings are either of the lubricated gear or dry diaphragm type design. Gear couplings have been the standard design for many years and recent advances in power and speed requirements have pushed the standard design criteria to the limit. Recent test stand and field data on continuous lube gear type couplings have forced a closer examination of design tolerances and concepts to avoid operational instabilities. Two types of mechanical instabilities are reviewed in this paper: (1) entrapped fluid, and (2) gear mesh instability resulting in spacer throw-out onset. Test stand results of these types of instabilities and other directly related problems are presented together with criteria for proper coupling design to avoid these conditions. An additional test case discussed shows the importance of proper material selection and processing and what can happen to an otherwise good design.

Kirk, R. G.↗
NASA NTRS2008

Localized arc filament plasma actuators for noise mitigation and mixing enhancement

A device for controlling fluid flow. The device includes an arc generator coupled to electrodes. The electrodes are placed adjacent a fluid flowpath such that upon being energized by the arc generator, an arc filament plasma adjacent the electrodes is formed. In turn, this plasma forms a localized high temperature, high pressure perturbation in the adjacent fluid flowpath. The perturbations can be arranged to produce vortices, such as streamwise vortices, in the flowing fluid to control mixing and noise in such flows. The electrodes can further be arranged within a conduit configured to contain the flowing fluid such that when energized in a particular frequency and sequence, can excite flow instabilities in the flowing fluid. The placement of the electrodes is such that they are unobtrusive relative to the fluid flowpath being controlled.

Samimy, Mohammad↗
NASA NTRS2010

Localized arc filament plasma actuators for noise mitigation and mixing enhancement

A device for controlling fluid flow. The device includes an arc generator coupled to electrodes. The electrodes are placed adjacent a fluid flowpath such that upon being energized by the arc generator, an arc filament plasma adjacent the electrodes is formed. In turn, this plasma forms a localized high temperature, high pressure perturbation in the adjacent fluid flowpath. The perturbations can be arranged to produce vortices, such as streamwise vortices, in the flowing fluid to control mixing and noise in such flows. The electrodes can further be arranged within a conduit configured to contain the flowing fluid such that when energized in a particular frequency and sequence, can excite flow instabilities in the flowing fluid. The placement of the electrodes is such that they are unobtrusive relative to the fluid flowpath being controlled.

Samimy, Mohammad↗
NASA NTRS1969

Instabilities encountered during heat transfer to a supercritical fluid

Investigation was made of the unstable behavior of a heat-transfer loop operating at a supercritical pressure. Natural convection operation of the loop, with observations on acoustic and slow oscillatory behavior, was emphasized during testing. The basic cause of both types of behavior appeared to originate in the heated boundary layer.

Cornelius, A. J.↗
NASA NTRS2003

Vision for CFD-Based Combustion Instability Predictions

This viewgraph representation presents an overview of the proposed development for computational fluid dynamics (CFD) based combustion instability predictions. These predictions are discussed in regard to Next Generation Launch Technologies (NGLT). Topics covered include: relevance of combustion instability to NGLT, evolution of combustion instability prediction techniques, and development of CFD-based models to support combustion instability predictions to support NGLT and beyond.

Rocker, Marvin↗
NASA NTRS1994

Parasitic instabilities in magnetized, differentially rotating disks

Velikhov, Chandrasekhar, Balbus & Hawley have discovered a MHD instability of differentially rotating fluids that may explain the effective viscosity of accretion disks. If the unperturbed magnetic energy density is much less than the gas pressure, this `magnetorotational' instability (MRI) arises on small scales and is approximately incompressible. If the unperturbed field is suffiently, strong, the MRI is suppressed. We therefore ask whether the MRI mechanism can amplify even very weak initial fields until they reach equipartition with the gas pressure. We show that in the total incompressible limit, the MRI modes are exact solutions of the nonlinear fluid equations, even if the perturbed magnetic field is much larger than the unperturbed field. Also, we present a new exact solution in the opposite limit that the magnetic pressure is much larger than that of the gas. On the other hand, we show that the incompressible MRI modes are themselves subject to parasitic instabilities with instantaneous growth rates proportional to the MRI amplitude. Some of the parasitic instabilities are of the Kelvin-Helmholtz type, while others are less familiar. The eigenfunctions of the latter group suggest that they may promote rapid reconnection of the MRI field. Thus, parasitic modes may stop MRI growth at subequipartition amplitudes if it developes from a sufficiently weak initital field.

Goodman, Jeremy↗
NASA NTRS1995

Computing Instability In Combustion Of Liquid Propellants

Computational fluid dynamics (CFD) code developed for use in design analyses of flow instabilities associated with combustion of sprayed liquid propellants in rocket engines. Code also contributes to design of improved commercial sprayed-fuel combustors in furnaces and jet engines. Proves robust, user-friendly software tool with comprehensive analysis capability. Enables characterization of stability or instability of engine in terms of such physically meaningful parameters as initial conditions of spray, spatial distribution of ratio between concentrations of fuel and oxidizer at injector faces, geometry of combustor, and configurations of baffles.

Chen, Yen-Sen↗
NASA NTRS1990

Viscous effects on the capillary instabilities of a hollow liquid cylinder

In a microgravity environment, a hollow cylinder of fluid is unstable to axisymmetric disturbances and breaks up to form hollow spheres. These instabilities are due to the surface tension of the fluid. The linear stability analysis presented in this paper shows that the viscosity of the fluid reduces the instability of the configuration, but that, regardless of its magnitude, it can never completely eliminate the instability.

Harvanek, Michael↗
NASA NTRS2010

Long Duration Life Test of Propylene Glycol Water Based Thermal Fluid Within Thermal Control Loop

Evaluations of thermal properties and resistance to microbial growth concluded that 50% Propylene Glycol (PG)-based fluid and 50% de-ionized water mixture was desirable for use as a fluid within a vehicle s thermal control loop. However, previous testing with a commercial mixture of PG and water containing phosphate corrosion inhibitors resulted in corrosion of aluminum within the test system and instability of the test fluid. This paper describes a follow-on long duration testing and analysis of 50% Propylene Glycol (PG)-based fluid and 50% de-ionized water mixture with inorganic corrosion inhibitors used in place of phosphates. The test evaluates the long-term fluid stability and resistance to microbial and chemical changes

Le, Hung↗
NASA NTRS1995

Simulation study of the role of ion kinetics in low-frequency wave train evolution

The evolution of uniform, parallel propagating, low-frequency (less than or approx. ion cyclotron) wave trains is followed with a one-dimensional hybrid numerical code with fluid electrons and particle ions. We show that moderate amplitude (delta B/B less than 1/2) wave trains give instabilities and saturated states which differ completely from pure fluid evolution. This is most clearly seen when beta greater than 1 and instability exists for wavenumbers both below and above the wavenumber of an inital, left-handed wave train or pump wave. For corresponding parameters a fluid theory gives only a narrow range of instability above the pump wavenumber where decay and beat instabilities can occur. in simulations wave energy inverse cascades to smaller wavenumbers and into a greater number of forward than backward going waves. In fluids energy by decay goes mostly to backward ones of smaller wavenumber, and energy by beat goes mostly to forward ones of larger wavenumber. Neither fluid instability explains simulation results. The instability is saturated by thermalizing ions and sometimes exciting small wavenumber electrostatic or acoustic modes. In contrast, saturation in fluids first occurs by generating the harmonics of the growing linear modes. Harmonic generation is mostly absent in simulations. Simulations are carried out to long times and mostly reach a limit beyond which no further significant evolution can occur. Application to Alfvenic fluctuations in the solar wind is discussed.

Vasquez, Bernard J.↗
NASA NTRS1974

Instabilities of a spatial system of articulated pipes conveying fluid

A spatial system of two articulated pipes conveying fluid is examined analytically and experimentally. As the flow rate is increased, stable equilibrium may be lost by either divergence (static buckling) or by flutter (oscillations with increasing amplitude), depending upon the value of an angle beta which measures the 'out-of-planeness' of the system. It is found that in the range O less than beta less than 90 deg there exists a transition value below which stability is lost by flutter and above which stability is lost by divergence.

Bohn, M. P.↗