Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Finite Element Interface Problems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

NASTRAN hydroelastic modal studies. Volume 1: Introduction, theory, and results

The implementation of a general three-dimensional hydroelastic capability in the NASTRAN computer program is described. A method for analyzing the combined mode shapes of arbitrary fluid and structure finite element models was developed. The fluid was modeled with three-dimensional solid elements with options for tetrahedron, wedge, and hexahedron shapes. The elements were then connected to fluid grid points which defined the pressure in the fluid at the specified location. Matrices were formulated to provide efficient solutions for large-order problems. The structure matrices were processed separately and could be reduced using matrix condensation procedures or through a modal formulation using the normal modes of the empty structure as solution coordinates. The fluid/structure interface and the free surface were defined by the user with special NASTRAN boundary elements. A special purpose mesh generator program was provided to generate the actual NASTRAN data cards for the fluid, the structure, and the boundary elements for typical tank-type models.

Source record↗

Trans-Laminar-Reinforced (TLR) Composites

A Trans-Laminar-Reinforced (TLR) composite is defined as composite laminate with up to five percent volume of fibrous reinforcement oriented in a 'trans-laminar' fashion in the through-thickness direction. The TLR can be continuous threads as in 'stitched laminates', or it can be discontinuous rods or pins as in 'Z-Fiber(TM) materials. It has been repeatedly documented in the literature that adding TLR to an otherwise two dimensional laminate results in the following advantages: substantially improved compression-after-impact response; considerably increased fracture toughness in mode 1 (double cantilever beam) and mode 2 (end notch flexure); and severely restricted size and growth of impact damage and edge delamination. TLR has also been used to eliminate catastrophic stiffener disbonding in stiffened structures. TLR directly supports the 'Achilles heel' of laminated composites, that is delamination. As little as one percent volume of TLR significantly alters the mechanical response of laminates. The objective of this work was to characterize the effects of TLR on the in-plane and inter-laminar mechanical response of undamaged composite laminates. Detailed finite element models of 'unit cells', or representative volumes, were used to study the effects of adding TLR on the elastic constants; the in-plane strength; and the initiation of delamination. Parameters investigated included TLR material, TLR volume fraction, TLR diameter, TLR through-thickness angle, ply stacking sequence, and the microstructural features of pure resin regions and curved in-plane fibers. The work was limited to the linear response of undamaged material with at least one ply interface. An inter-laminar dominated problem of practical interest, a flanged skin in bending, was also modeled.

Hinders, Mark↗

COSMIC/NASTRAN-PATRAN Interface

A three dimensional solid modeling and finite element pre and postprocessing program, PATRAN, uses the latest interactive computer graphics technology, provides a visual means to define a finite element model and its environment, and reviews its resultant model behavior. The capabilities provided by the PATRAN-COSMIC/NASTRAN interface are discussed. While the translator capabilities give some indication of the interface quality between the two programs, there are other attributes to be considered. The ideal interface would be a user transparent union of the two programs so that the engineer could move from one program to the other fluently and naturally. Hence, a valid assessment of the interface completeness must consider how close the current capabilities are to the idealized case. An example problem is presented to demonstrate how COSMIC/NASTRAN and PATRAN can be used together to meet the requirements of an actual engineering application.

Libby, D. H.↗

Coupled analysis of independently modeled finite element subdomains

A new method for analyzing plate and shell structures with two or more independently modeled finite element subdomains is presented, assessed, and demonstrated. This method provides a means of coupling local and global models whose grid points do not coincide along their common interface. In general, the method provides a means of coupling structural components (e.g., wing and fuselage) which may have been modeled by different analysis. In both cases, the need for transition modeling, which is often tedious and complicated, is eliminated. The coupling is accomplished through an interface for which three formulations are considered and presented. These formulations are: collocation, least-squares, and hybrid variational. Several benchmark problems were analyzed and, based on the results, the hybrid variational formulation is identified as the preferred formulation in that it provides the most accurate solutions.

Aminpour, M. A.↗

Coupling finite and boundary element methods for two-dimensional potential problems

A finite element-boundary element (FE-BE) coupling method based on a weighted residual variational method is presented for potential problems, governed by either the Laplace or the Poisson equations. In this method, a portion of the domain of interest is modeled by finite elements (FE) and the remainder of the region by boundary elements (BE). Because the BE fundamental solutions are valid for infinite domains, a procedure that limits the effects of the BE fundamental solution to a small region adjacent to the FE region, called the transition region (TR), is developed. This procedure involves a judicious choice of functions called the transition (T) functions that have unit values on the BE-TR interface and zero values on the FE-TR interface. The present FE-BE coupling algorithm is shown to be independent of the extent of the transition region and the choice of the transition functions. Therefore, transition regions that extend to only one layer of elements between FE and BE regions and the use of simple linear transition functions work well.

Krishnamurthy, T.↗

Algorithms and software for solving finite element equations on serial and parallel architectures

The primary objective was to compare the performance of state-of-the-art techniques for solving sparse systems with those that are currently available in the Computational Structural Mechanics (MSC) testbed. One of the first tasks was to become familiar with the structure of the testbed, and to install some or all of the SPARSPAK package in the testbed. A brief overview of the CSM Testbed software and its usage is presented. An overview of the sparse matrix research for the Testbed currently employed in the CSM Testbed is given. An interface which was designed and implemented as a research tool for installing and appraising new matrix processors in the CSM Testbed is described. The results of numerical experiments performed in solving a set of testbed demonstration problems using the processor SPK and other experimental processors are contained.

Chu, Eleanor↗

An in-depth probabilistic study of external tank attach ring

This report deals with conducting a probabilistic study of the external tank attach ring (ETA) used as an interface between the external tank attach struts and the solid rocket booster. The ideas were to use probabilistic distributions for material, geometric, and load properties; to calculate probabilistic margins of safety; and then to compare results against the deterministic factors of safety that were used in the actual design process. The report describes how this was done and discusses some of the road blocks and data problems that were encountered during the study and provides some conclusions. A further refinement of this study is being considered for future work which would make more direct use of finite element analysis data coupled with Monte Carlo simulation. The basic conclusion herein indicates that the probabilistic margins of safety for the cases analyzed (by use of existing data) appear to support deterministic results and actually indicate higher reliabilities.

Pizzano, Frank↗

Specialists Meeting on Rotorcraft Dynamics, Moffett Field, Calif., February 13-15, 1974, Proceedings

Analysis of specific problems in rotorcraft dynamics. Topics include hingeless rotor theory, dynamic stall modelling, periodic systems identification, analysis of complex systems with phasing matrices, flapping stability, flap-lag dynamics at high advance ratios, finite element analysis and fuselage free-vibration characteristics, coupled rotor/frame vibration methods, gust response characteristics with unsteady stall effects, antiresonance theory, cyclic feathering motions and dynamic loads, control load envelope shaping, rotor aeroelasticity, use of Floquet theory, theory of proprotors and tilt-rotors, two-bladed teetering rotors, stability of air and ground resonance, vertical-plane pendulum absorbers, multicyclic jet-flap control, engine/frame interface dynamics, and others. The minutes of the question and answer periods following the presentations are presented in the supplement. Individual items are announced in this issue.

Source record↗

Advanced information processing system: Hosting of advanced guidance, navigation and control algorithms on AIPS using ASTER

This program demonstrated the integration of a number of technologies that can increase the availability and reliability of launch vehicles while lowering costs. Availability is increased with an advanced guidance algorithm that adapts trajectories in real-time. Reliability is increased with fault-tolerant computers and communication protocols. Costs are reduced by automatically generating code and documentation. This program was realized through the cooperative efforts of academia, industry, and government. The NASA-LaRC coordinated the effort, while Draper performed the integration. Georgia Institute of Technology supplied a weak Hamiltonian finite element method for optimal control problems. Martin Marietta used MATLAB to apply this method to a launch vehicle (FENOC). Draper supplied the fault-tolerant computing and software automation technology. The fault-tolerant technology includes sequential and parallel fault-tolerant processors (FTP & FTPP) and authentication protocols (AP) for communication. Fault-tolerant technology was incrementally incorporated. Development culminated with a heterogeneous network of workstations and fault-tolerant computers using AP. Draper's software automation system, ASTER, was used to specify a static guidance system based on FENOC, navigation, flight control (GN&C), models, and the interface to a user interface for mission control. ASTER generated Ada code for GN&C and C code for models. An algebraic transform engine (ATE) was developed to automatically translate MATLAB scripts into ASTER.

Brenner, Richard↗

Drop Ejection From an Oscillating Rod

The dynamics of a drop of a Newtonian liquid that is pendant from or sessile on a solid rod that is forced to undergo time-periodic oscillations along its axis is studied theoretically. The free boundary problem governing the time evolution of the shape of the drop and the flow field inside it is solved by a method of lines using a finite element algorithm incorporating an adaptive mesh. When the forcing amplitude is small, the drop approaches a limit cycle at large times and undergoes steady oscillations thereafter. However, drop breakup is the consequence if the forcing amplitude exceeds a critical value. Over a wide range of amplitudes above this critical value, drop ejection from the rod occurs during the second oscillation period from the commencement of rod motion. Remarkably, the shape of the interface at breakup and the volume of the primary drop formed are insensitive to changes in forcing amplitude. The interface shape at times close to and at breakup is a multi-valued function of distance measured along the rod axis and hence cannot be described by recently popularized one-dimensional approximations. The computations show that drop ejection occurs without the formation of a long neck. Therefore, this method of drop formation holds promise of preventing formation of undesirable satellite droplets.

Wilkes, E. D.↗

Development and verification of global/local analysis techniques for laminated composites

A two-dimensional to three-dimensional global/local finite element approach was developed, verified, and applied to a laminated composite plate of finite width and length containing a central circular hole. The resulting stress fields for axial compression loads were examined for several symmetric stacking sequences and hole sizes. Verification was based on comparison of the displacements and the stress fields with those accepted trends from previous free edge investigations and a complete three-dimensional finite element solution of the plate. The laminates in the compression study included symmetric cross-ply, angle-ply and quasi-isotropic stacking sequences. The entire plate was selected as the global model and analyzed with two-dimensional finite elements. Displacements along a region identified as the global/local interface were applied in a kinematically consistent fashion to independent three-dimensional local models. Local areas of interest in the plate included a portion of the straight free edge near the hole, and the immediate area around the hole. Interlaminar stress results obtained from the global/local analyses compares well with previously reported trends, and some new conclusions about interlaminar stress fields in plates with different laminate orientations and hole sizes are presented for compressive loading. The effectiveness of the global/local procedure in reducing the computational effort required to solve these problems is clearly demonstrated through examination of the computer time required to formulate and solve the linear, static system of equations which result for the global and local analyses to those required for a complete three-dimensional formulation for a cross-ply laminate. Specific processors used during the analyses are described in general terms. The application of this global/local technique is not limited software system, and was developed and described in as general a manner as possible.

Thompson, Danniella Muheim↗

Finite element analysis of time-independent superconductivity

The development of electromagnetic (EM) finite elements based upon a generalized four-potential variational principle is presented. The use of the four-potential variational principle allows for downstream coupling of EM fields with the thermal, mechanical, and quantum effects exhibited by superconducting materials. The use of variational methods to model an EM system allows for a greater range of applications than just the superconducting problem. The four-potential variational principle can be used to solve a broader range of EM problems than any of the currently available formulations. It also reduces the number of independent variables from six to four while easily dealing with conductor/insulator interfaces. This methodology was applied to a range of EM field problems. Results from all these problems predict EM quantities exceptionally well and are consistent with the expected physical behavior.

Schuler, James J.↗

A constitutive law for finite element contact problems with unclassical friction

Techniques for modeling complex, unclassical contact-friction problems arising in solid and structural mechanics are discussed. A constitutive modeling concept is employed whereby analytic relations between increments of contact surface stress (i.e., traction) and contact surface deformation (i.e., relative displacement) are developed. Because of the incremental form of these relations, they are valid for arbitrary load-deformation histories. The motivation for the development of such a constitutive law is that more realistic friction idealizations can be implemented in finite element analysis software in a consistent, straightforward manner. Of particular interest is modeling of two-body (i.e., unlubricated) metal-metal, ceramic-ceramic, and metal-ceramic contact. Interfaces involving ceramics are of engineering importance and are being considered for advanced turbine engines in which higher temperature materials offer potential for higher engine fuel efficiency.

Plesha, M. E.↗

Vibration characteristics of mistuned shrouded blade assemblies

An investigation of the mode localization phenomenon associated with mistuning is presented for shrouded blade assemblies. The calculations are based on a generic finite element model, which permits modeling of arbitrary mistuning and both slipping and nonslipping shroud interfaces. The results presented indicate that interactions occur between mistuning and slip effects, with maximum mode localization occurring when the shrouds slip freely. Certain modes are found to be very sensitive to shroud slip, and in some cases completely change character when slip occurs. Mode localization is most pronounced in the predominantly bending modes, and varies considerably from mode to mode. As the ratio of interblade coupling strength to mistuning strength is increased, the effect of mistuning is observed to decrease significantly. This result has important implications for the flutter problem, since it suggests that the stabilization effect available from mistuning is significantly less for a shrouded rotor as compared to an unshrouded rotor.

Bendiksen, O. O.↗

A study on thermal barrier coatings including thermal expansion mismatch and bond coat oxidation

The present investigation deals with a plasma-sprayed thermal barrier coating (TBC) intended for high temperature applications to advanced gas turbine blades. Typically, this type of coating system consists of a zirconia-yttria ceramic layer with a nickel-chromium-aluminum bond coat on a superalloy substrate. The problem on hand is a complex one due to the fact that bond coat oxidation and thermal mismatch occur in the TBC. Cracking in the TBC has also been experimentally illustrated. A clearer understanding of the mechanical behavior of the TBC is investigated. The stress states in a model thermal barrier coating as it cools down in air is studied. The powerful finite element method was utilized to model a coating cylindrical specimen. Four successively refined finite element models were developed. Some results obtained using the first two models have been reported previously. The major accomplishment is the successful development of an elastic TBC finite element model known as TBCG with interface geometry between the ceramic layer and the bond coat. An equally important milestone is the near-completion of the new elastic-plastic TBC finite element model called TBCGEP which yielded initial results. Representative results are presented.

Chang, George C.↗

Application of the NASA Multiscale Analysis Tool: Multiscale Integration and Interoperability

In order to demonstrate NASMAT’s multiscale operability, a series of illustrative examples will be presented that focus on the application of NASMAT to practical problems. First, the multiscale integration and data recursion is demonstrated by performing a multiscale analysis using only built-in micromechanics methods. NASMAT’s integration is then highlighted by running a multiscale analysis where an external finite element software calls NASMAT. In this case, at each integration point within the finite element model, a local NASMAT analysis is performed to account for failure behavior at the constituent scale. In a similar example, an external program is called from within NASMAT. This case would be relevant for a user wanting to implement an outside micromechanics technique. A combination of these examples is then presented to further illustrate the code’s flexibility when interfacing with outside codes in a multiscale framework. For all examples, data is presented using a custom-developed visualization tool. Additional potential use cases are also addressed. Finally, the plan for upcoming features and added capabilities is discussed.

NASMAT↗

Penalty-Based Finite Element Interface Technology for Analysis of Homogeneous and Composite Structures

An effective and robust interface element technology able to connect independently modeled finite element subdomains has been developed. This method is based on the use of penalty constraints and allows coupling of finite element models whose nodes do not coincide along their common interface. Additionally, the present formulation leads to a computational approach that is very efficient and completely compatible with existing commercial software. A significant effort has been directed toward identifying those model characteristics (element geometric properties, material properties, and loads) that most strongly affect the required penalty parameter, and subsequently to developing simple 'formulae' for automatically calculating the proper penalty parameter for each interface constraint. This task is especially critical in composite materials and structures, where adjacent sub-regions may be composed of significantly different materials or laminates. This approach has been validated by investigating a variety of two-dimensional problems, including composite laminates.

Averill, Ronald C.↗

Error estimation and adaptive mesh refinement for parallel analysis of shell structures

The formulation and application of element-level, element-independent error indicators is investigated. This research culminates in the development of an error indicator formulation which is derived based on the projection of element deformation onto the intrinsic element displacement modes. The qualifier 'element-level' means that no information from adjacent elements is used for error estimation. This property is ideally suited for obtaining error values and driving adaptive mesh refinements on parallel computers where access to neighboring elements residing on different processors may incur significant overhead. In addition such estimators are insensitive to the presence of physical interfaces and junctures. An error indicator qualifies as 'element-independent' when only visible quantities such as element stiffness and nodal displacements are used to quantify error. Error evaluation at the element level and element independence for the error indicator are highly desired properties for computing error in production-level finite element codes. Four element-level error indicators have been constructed. Two of the indicators are based on variational formulation of the element stiffness and are element-dependent. Their derivations are retained for developmental purposes. The second two indicators mimic and exceed the first two in performance but require no special formulation of the element stiffness mesh refinement which we demonstrate for two dimensional plane stress problems. The parallelizing of substructures and adaptive mesh refinement is discussed and the final error indicator using two-dimensional plane-stress and three-dimensional shell problems is demonstrated.

Keating, Scott C.↗