Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Findings”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Findings from Design and Operation of Connected Neighborhoods

Distributed energy resources and load management are an important emerging part of smart grids. Concurrent management of homeowner preferences and utility objectives requires an intelligent negotiation strategy supported by physical infrastructure that learns, optimizes, and controls the system. While there is a wide body of research related to modelling and simulation of distributed resources, relatively little is known about their practical feasibility. One of the first attempts to address this knowledge gap was through a 62-house connected neighborhood in Alabama. This study makes one more step in advancing this knowledge through a 46-townhome demonstration neighborhood located in Atlanta, GA. It reports hardware design, system architecture, and the results from the summer experimental work. The findings are discussed in the context of earlier experience, and analysis is expanded to areas which were not the focus of earlier research.

Tsybina, Eve↗
DOE OSTI2024

Influence of open ocean biogeochemistry on aerosol and clouds: Recent findings and perspectives

Aerosols and clouds are key components of the marine atmosphere, impacting the Earth’s radiative budget with a net cooling effect over the industrial era that counterbalances greenhouse gas warming, yet with an uncertain amplitude. Here we report recent advances in our understanding of how open ocean aerosol sources are modulated by ocean biogeochemistry and how they, in turn, shape cloud coverage and properties. We organize these findings in successive steps from ocean biogeochemical processes to particle formation by nucleation and sea spray emissions, further particle growth by condensation of gases, the potential to act as cloud condensation nuclei or ice nucleating particles, and finally, their effects on cloud formation, optical properties, and life cycle. We discuss how these processes may be impacted in a warming climate and the potential for ocean biogeochemistry—climate feedbacks through aerosols and clouds.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Co-Optimization of Fuels & Engines Findings and Impact (FY2015-FY2021 Report)

Breakthroughs from the U.S. Department of Energy Co-Optimization of Fuels & Engines (Co-Optima) initiative could make it possible to more rapidly cut emissions, reduce dependence on international petroleum, and contribute to ambitious national goals to slow global warming on the land, in the air, and across the water. Findings from the 6-year collaborative undertaking are now available in this report.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2023

Geothermal Interagency Collaboration Task Force: Summary of Findings

This report summarizes the findings of the Geothermal Interagency Collaboration Task Force (Task Force) and associated stakeholder forums and Tribal listening sessions. The Task Force included federal agencies and state agencies in California and Nevada with a nexus to geothermal regulatory and permitting approvals. The Task Force met twice over the course of 2022 to discuss current geothermal regulatory and permitting challenges and strategies for improved coordination and permit processing. In addition, the project team held four forums/listening sessions in 2022 with geothermal industry representatives, environmental non-governmental organizations, and Tribes to gain additional insight and perspective on the geothermal regulatory process and managing potential cultural and natural resource conflicts that may arise during geothermal development.

15 GEOTHERMAL ENERGY↗
DOE OSTI2024

Planning and Operations in Electricity Markets Under System Tansformation: Key Findings

This report summarizes a set of key findings that have been developed through a set of interconnected research activities performed by five institutions between January 2020 and December 2023. The project team, comprising Argonne National Laboratory, the National Renewable Energy Laboratory, Lawrence Berkeley National Laboratory, the Electric Power Research Institute, and Johns Hopkins University, collective engaged with the North American Independent System Operators and Regional Transmission Operators (ISO/RTOs) to identify the key challenges they are facing and opportunities for the project team to provide technical assistance in several prioritized challenge areas.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2024

FORESTR: Finding, Organizing, Representing, Explaining, Summarizing, and Thinning Random forests

Random forests have become popular models used for data driven predictions. As a result, random forests are currently used or being considered for high-consequence mission applications in national security, such as the prediction of yield from optical signals and malware detection. While random forests may provide accurate predictions, the complexity of the algorithm causes a lack of interpretability. Random forests are an ensemble of regression or decision trees. Individual regression and decision trees are interpretable, but ensembles are inherently difficult to interpret due to the compilation of many models. We aim to increase the interpretability of random forests by finding patterns in the ensemble of trees that can be used to “thin” (or remove) trees. As a starting point, in this report, we develop a new distance metric for quantifying the similarity between trees based on their topologies (i.e., shapes). We base the metric on a novel distance metric for graphs that is a proper mathematical distance, is invariant to transformations, has registration between graphs, and computes topological evolutions between graphs. We use the tree distance metric to compute tree statistics such as a “mean tree” and to identify clusters of trees. We apply the developed methodology to a toy dataset and a mission relevant product inspection dataset to demonstrate how the metric can provide insight into random forests. Furthermore, we discuss the limitations of the approach and ideas for future research into how the metric could be used as a thinning tool to develop less complex models.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Advancing Grid Resilience through Smart Charge Management: Findings from Maryland’s Pilot

This report presents research findings from a four-year Smart Charge Management (SCM) pilot program conducted by Maryland’s largest electric utilities—Baltimore Gas and Electric (BGE), Potomac Electric Power Company (Pepco), and Delmarva Power & Light (DPL)—to evaluate strategies for optimizing electric vehicle (EV) charging loads and enhancing grid stability. Supported by the U.S. Department of Energy (DOE), Argonne National Laboratory collaborated with all project partners and examined the effectiveness of Time-of-Use (TOU) and Load Balancing (LB) strategies in managing peak demand, deferring costly infrastructure upgrades, and reducing grid constraints at the feeder level.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2025

Findings on subtask 3.3 – applicability of automated brine chemistry determinations for treatment and recovery processes through facility automation/modularization: engineering design study

Under the Energy & Environmental Research Center’s (EERC’s) ~$\$$22 million Phase II Brine Extraction and Storage Test (BEST) Program, a multimillion-dollar brine treatment technology test bed facility was established in western North Dakota to provide a platform for evaluating developing technologies and approaches for brine treatment and volume reduction. The initial facility, and associated research effort, was funded by the U.S. Department of Energy (DOE), with in-kind contributions provided by several industry participants and the state of North Dakota. Since its opening, the Brine Technology Test Facility (BTTF) has supported performance evaluations of desalination technologies capable of treating high-salinity produced water (PW) and enabled data collection for multiple approaches of PW management and critical material recovery. As part of the decommissioning process for the original project, facility ownership and liability were transferred to Select Water, which is providing the EERC with a continuing site access option for state or federal research and/or commercial technology development. This report documents the findings from a design study conducted by the EERC and the engineering firm that was originally contracted to design and construct the facility (Advanced Engineering and Environmental Services, LLC [AE2S]) that evaluated the current status of BTTF and its systems and developed a retrofit design to increase the facility’s capabilities through automation and modularization of its PW treatment infrastructure. The proposed retrofit will provide DOE and industry with an expanded range of conditioned PW that can be produced at the facility for evaluating fit-for-purpose water treatment technologies, online instrumentation for brine chemistry determination, and systems that recover critical materials like lithium and magnesium. The current facility consists of an 9600-square-foot facility that includes a 40-foot by 65-foot Class 1, Division 2-rated demonstration area and associated control rooms and lab-ready space capable of sourcing oil and gas PW and wastewater from industrial sources or tailoring brine compositions up to 300,000 mg/L total dissolved solids (TDS) and supplying them at rates up to 25 gpm for extended-duration technology demonstrations. The colocation of the facility with Select Water’s water management facilities allows for access and unloading of more than 10,000 bbl/day of trucked water delivered to site and associated access to on-site Class I and Class II brine disposal wells and nearby hazardous waste landfills operated and/or contracted by Select Water to dispose of concentrate and/or effluents associated with the testing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Findings from Large Bench-Scale Testing of Denitration Electrolyzers for the EDCGe Project

This report highlights the key findings and outcomes relevant to the processability of waste supernatant at Hanford using a denitration electrolyzer. The Electrosynthesis Company issued a Phase 1 report to the Savannah River National Laboratory (SRNL), summarizing the evaluation of large bench-scale denitration electrolyzers to support the electrochemical denitration and caustic generation (EDCGe) project. The Electrosynthesis Company’s report (attached as Appendix A) provides insights into the initial steps required to implement an electrolyzer system at Hanford. Phase 1 experiments focused on validating the denitration electrolyzer’s performance, operating parameters, and reaction products. The robustness of the electrochemical denitration process was demonstrated by two electrolyzer flow cell systems (a 100 cm 2 ElectroCell MP and a 150 cm 2 NESI NS01 cell), both of which achieved significant nitrate and nitrite removal (>50%) with a current efficiency of ~95% for both systems. Higher current densities (500 mA cm –2 ) improved nitrate and nitrite removal rates compared to lower current densities (333 mA cm –2 ), while maintaining a current efficiency of ~94%. The NS01 cell achieved a nitrate species removal rate of ~0.41 mol h –1 at 5 kA m –2 (equiv. to 500 mA cm –2 ). The primary reaction product was ammonia (NH 3 ), constituting 78.3–91.6% of the products (excluding OH – formation). NH 3 was predominantly retained in the catholyte liquid phase rather than being off-gassed. Additionally, the NS01 cell reported an NH 3 generation rate of ~0.36 mol h –1 at 5 kA m –2 . Other gas formation included ~7% N 2 , ~7% H 2 , and trace amounts of N 2 O. The estimated power requirement (extrapolated from the 0.015 m 2 cell data) for a full-scale denitration electrolyzer is approximated to be ~1.6 MW (DC-only) to treat 50% of nitrate and nitrite in a waste stream and generates ~2.1 kmol h –1 of NH 3 with an initial concentration of 4 M NO 3 – /NO 2 – at 300 gal h –1 . Simulated waste containing aluminate, carbonate, oxalate, and halogens exhibited no adverse effects on denitration performance. A preliminary experiment comparing alkaline anolyte (5 M NaOH) with a nickel based anode to acidic media (2 M H 2 SO 4 ) with a DSA-O 2 anode showed a lower operating voltage and generated less H 2 than the acid media. Maintaining a stable 5 M OH – concentration in the anolyte through periodic additions of caustic did not significantly impact denitration performance. This operational mode will be required for long-term experiments. All the experiments demonstrated that electrochemical denitration is a promising approach for treating nitrate and nitrite in simulated waste streams, achieving significant conversion and robustness across varying experimental conditions and electrochemical cell configurations. Lastly, the ability to generate a nearly pure NH 3 stream may prove advantageous for processing at other locations within the Hanford site.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2024

Finding ways to reduce nuclear waste: searching for the unknown one step at a time

In my home country, Venezuela, research has been stagnant. Due to the political turmoil and the crisis, many educated people have left the country in search for a better life. This has caused a deficit in any technological and scientific advances, making Venezuela one of the first South American countries to have its rate of publications decline by 29% in 2013. Currently, Venezuela lacks the infrastructure and the means to keep up with the research progress as compared to other countries in South America, such as Brazil. Since coming to the United States (US), and currently working for a national laboratory, the active research environment endorses a wide range of careers and engineering programs that allow researchers to thrive at any given field. Researchers have access to funds and tools to succeed in developing materials for the future. There are 17 national laboratories in the US, and all of these have a different research focus/objective. As examples, Los Alamos National Laboratory and Sandia National Laboratory focus is on national homeland security, weapon science, radiation effects, among others. Argonne National Laboratory focuses on nuclear energy, energy storage, high performance computing, etc. At Idaho National Laboratory (INL) the research focuses on innovating nuclear energy and clean energy resources, critical infrastructure materials, along with fuel cycle solutions to manage, dispose and find ways to recycle current and future radiological waste. Compared to other national laboratories, INL focuses slightly more on applied processes and how nuclear energy can be innovated to next reactor design and technologies. The research being conducted at INL made me apply for a Seaborg distinguished postdoctoral position. For the position itself, the researcher must submit a proposal related to actinide chemistry on a research field area. In this position, 50% of my time will be focused on my own proposal. The proposal that I am working on is focused on the innovation of nuclear energy and fuel cycle recycling, which is why I was mainly interested on working at this national laboratory. To give a bit more context of what my proposal is about, a little bit of background is necessary: After the nuclear fuel (UO2) is used in a reactor, the fuel matrix is then characterized by various fission products (FP). Among these FP (including rare earth elements, alkali/alkaline earths, and actinides), many can potentially be recovered through nuclear reprocessing technologies. In pyroprocessing, the used nuclear fuel undergoes electrochemical dissolution into a molten chloride salt mixture in an electrorefiner. Initially, uranium is reduced onto an inert cathode by applied potentials. However, numerous remaining FPs accumulate in the melt and pose challenges for recovery by an inert electrode, particularly the rare earth elements (e.g., Nd, Gd, Pr, Sm) due to their multivalent oxidation states and tendencies toward side reactions, leading to their dissolution in the electrolyte. These recovery challenges result in inefficiencies and necessitate the continual discarding of the molten chloride salt, thereby generating additional waste. Furthermore, the presence of rare earth elements and other fission products in the molten salt electrolyte alters its physical and chemical properties, affecting both uranium recovery efficiency and the longevity of the molten chloride salt. To improve the recovery efficiency of the FP, specifically rare earth elements, I am investigating the fundamental interactions between rare earth elements in the molten chloride salt and their metallic form. The kinetic pathways and the chemical reactions of these elements will give insights on how the recovery efficiency can be improved. The interactions and speciation of these elements are being studied by spectro-electrochemistry at high temperature environments in quartz and other ceramic materials (e.g., alumina crucibles). Some of the challenges I am facing specifically relates the reactivity of some of these elements with different glass and crucible materials. Although my research focuses on fundamental science, it will benefit the applied process by generating new scientific knowledge and closing the gap for an efficient recycling of the waste: one step at a time.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2026

Residential Vehicle-to-Home Backup Power Capabilities: Key Findings from a ComEd Beneficial Electrification R&D Pilot

This report summarizes key findings from a collaborative technical study of residential, non-grid-tied vehicle-to-home (V2H) backup power systems in Commonwealth Edison’s (ComEd’s) service territory. The work integrates (1) a feeder-level technoeconomic analysis (TEA) using historical outage-event data and simulated electric-vehicle (EV) driving/charging profiles to estimate potential reliability and customer interruption-cost impacts under V2H and vehicle-to-grid (V2G) adoption scenarios; (2) controlled laboratory performance testing of a representative V2H backup ecosystem to characterize transfer-to-backup behavior, sustained power delivery, efficiency trends, and repeatable reliability limitations; and (3) a cybersecurity assessment aligned with NIST Cybersecurity Framework (CSF) 2.0 and ISO/SAE 21434 to evaluate interface-level risk drivers and identify program-relevant mitigations. Results indicate that V2H can provide measurable resilience value, but outcomes are strongly context dependent on outage patterns and the share of events that are “V2H-applicable.” Typical transfer-to-backup behavior clustered on the order of minutes, but rare long-delay edge cases were observed (including an event approaching 30 minutes) and should be treated as a reliability risk. High-power testing showed that peak-rated output is not necessarily continuously deliverable; stable operation may require operation below nameplate ratings and attention to thermal and installation constraints. The cybersecurity assessment highlights a broad attack surface spanning commissioning, home networks, embedded services, and cloud/OTA pathways, motivating minimum controls for secure onboarding, signed updates, patch cadence, and coordinated vulnerability response for any scaled deployment.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2023

Using iterative random forest to find geospatial environmental and Sociodemographic predictors of suicide attempts

Despite a recent global decrease in suicide rates, death by suicide has increased in the United States. It is therefore imperative to identify the risk factors associated with suicide attempts to combat this growing epidemic. In this study, we aim to identify potential risk factors of suicide attempt using geospatial features in an Artificial intelligence framework. We use iterative Random Forest, an explainable artificial intelligence method, to predict suicide attempts using data from the Million Veteran Program. This cohort incorporated 405,540 patients with 391,409 controls and 14,131 attempts. Our predictive model incorporates multiple climatic features at ZIP-code-level geospatial resolution. We additionally consider demographic features from the American Community Survey as well as the number of firearms and alcohol vendors per 10,000 people to assess the contributions of proximal environment, access to means, and restraint decrease to suicide attempts. In total 1,784 features were included in the predictive model. Our results show that geographic areas with higher concentrations of married males living with spouses are predictive of lower rates of suicide attempts, whereas geographic areas where males are more likely to live alone and to rent housing are predictive of higher rates of suicide attempts. We also identified climatic features that were associated with suicide attempt risk by age group. Additionally, we observed that firearms and alcohol vendors were associated with increased risk for suicide attempts irrespective of the age group examined, but that their effects were small in comparison to the top features. Taken together, our findings highlight the importance of social determinants and environmental factors in understanding suicide risk among veterans.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2023

ISO 50001-Based Energy Management Systems as a Practical Path for Decarbonization: Initial Findings from a Survey of Technical Assistance Cohort Participants

Organizations face rising pressure to take action to reduce their climate-affecting emissions (i.e., decarbonize). While many responses are possible, an essential approach—strategically managing their energy consumption as an essential business practice via an ISO 50001-based energy management system—is not yet widely recognized as a framework for decarbonization. This study analyzes interim survey results from 24 organizations (a 48% response rate) implementing a rigorous energy management system, one deployed by the U.S. Department of Energy as “50001 Ready”, to test whether participating organizations perceive the energy management system under development as an essential aspect of their decarbonization efforts. The results are preliminary in nature, given the ongoing nature of the program and associated data collection; however, they are sufficient to refute our hypothesis that energy management systems are perceived by organizations participating in 50001 Ready cohorts to primarily affect energy performance with little-to-no connection regarding decarbonization efforts. Major findings include that participants’ decarbonization targets and commitments are driven by market imperatives (highlighting the importance of ISO 50001 as a management system tool) and that they see energy efficiency as vital to decarbonizing. We conclude by suggesting future research directions to further establish the premise that energy management systems are an effective, efficient, and long-lasting decarbonization strategy.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2026

Assessing Uncertainty in Solar Measurements: Key Findings From NLR's SUNI Application Across 89 Stations

The Solar Uncertainty Integrator (SUNI) study was developed by the National Laboratory of the Rockies (NLR's) to provide a standardized "bulk uncertainty processing" method for solar irradiance data, which are essential for the successful deployment of solar energy systems. This poster provides an overview of key findings from NLR's SUNI application across 89 stations.

14 SOLAR ENERGY↗