Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FLASH effect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Testing Vpin on Big Data Response to Reflecting on the Vpin Dispute

The authors of this note are computer scientists and mathematicians from Lawrence Berkeley National Laboratory. Most of us are specialists in high-performance computing. In 2011, at the suggestion of a CFTC commissioner, we started examining the effectiveness of VPIN as a leading indicator of unusual market events such as the “Flash Crash” of 2010. The preliminary result of that work was published as a conference paper. Our work was the first to show that VPIN could generate strong signals based on trading records of individual stocks. On a number of stocks, VPIN generated strong signals more than an hour before the “Flash Crash.” This lead-time could be valuable for market makers, regulators and traders in general. To further test the effectiveness of VPIN, we recently expanded our tests to a much larger set of test data, including the trading records of the 94 most liquid futures contracts from beginning of 2007 to middle of 2012. We set out to verify the following hypothesis: the volatility of trading is higher than the average in a time window (we call the event horizon) after VPIN value crosses a threshold. Our work carefully examined the parameters controlling the computation of VPIN as well as the event horizon and the VPIN threshold. In this largest-ever study of a leading indicator based on market microstructure, we examined 16,000 combinations of these parameters, and found that the average false positive rate can be reduced to 7%.

97 MATHEMATICS AND COMPUTING↗

Bioavailability of soy isoflavones through placental/lactational transfer and soy food

Isoflavones are non-nutritive components of soy responsible for estrogenic responses observed in vitro and in experimental animals. Possible beneficial effects (e.g., reduction of serum lipids, increased bone mineral density, relief of hot flashes and other menopausal symptoms, mammary and prostate cancer chemoprevention) in humans have been attributed to consumption of isoflavones but evidence for potential adverse effects (e.g., stimulation of estrogen-dependent mammary tumors and aberrant perinatal development) has also been reported in experimental animal models. Bioavailability from appropriate food matrices and exposure during different life stages are both critical determinants of isoflavone effects. For these reasons, it is important to compare isoflavone bioavailability in adults to that in fetal and neonatal animals for a more complete understanding of potential susceptibility issues. Studies of the major soy isoflavone genistein were conducted in pregnant and lactating Sprague-Dawley rats to quantify placental and lactational transfer to plasma and brain to understand better biological effects observed in multigenerational studies. In addition, studies were conducted with genistein in adult Balb/c mice to define absolute bioavailability from both gavage and soy protein isolate (SPI)-containing food. The information derived from these studies makes it possible to predict internal exposures of children to genistein from soy infant formula, which is manufactured using SPI.

60 APPLIED LIFE SCIENCES↗

Simulations of three-layer Richtmyer–Meshkov mixing in a shock tube

Here, the Richtmyer–Meshkov instability causes perturbations to grow after a shock traverses a fluid density interface. This increases the mixing rate between fluid from either side of the interface. We use the Flash Eulerian hydrodynamic code to investigate alterations when a thin third layer of intermediate density is placed along the interface, effectively creating two adjacent unstable interfaces. This is a common occurrence in engineering applications where a thin barrier initially separates two materials. We find that the width of the mixing layer is similar or slightly reduced; however, the total mass of mixed material can actually increase. The mixing layer becomes more compact and efficient. However, the normalized mixed mass decreases, meaning that finger entrainment becomes more important than in the simple two-layer case. The effect of adding the central layer appears to decrease when the Atwood number is decreased. The Flash results are also benchmarked against two-layer experimental data from a shock tube at the University of Arizona.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electric field-induced softening of alkali silicate glasses

Motivated by the advantages of two-electrode flash sintering over normal sintering, we have investigated the effect of an external electric field on the viscosity of glass. The results show remarkable electric field-induced softening (EFIS), as application of DC field significantly lowers the softening temperature of glass. To establish the origin of EFIS, the effect is compared for single vs. mixed-alkali silicate glasses with fixed mole percentage of the alkali ions such that the mobility of alkali ions is greatly reduced while the basic network structure does not change much. The sodium silicate and lithium-sodium mixed alkali silicate glasses were tested mechanically in situ under compression in external electric field ranging from 0 to 250 V/cm in specially designed equipment. A comparison of data for different compositions indicates a complex mechanical response, which is observed as field-induced viscous flow due to a combination of Joule heating, electrolysis and dielectric breakdown.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Spectral analysis and temperature measurement during flash sintering under AC electric field

In-situ diffraction experiments were used to study the change in peak profiles of 8YSZ during conventional sintering and flash sintering under AC electric field. Using calibration from a conventionally heated standard, the lattice expansion of 8YSZ under flash conditions was correlated to actual specimen temperature, indicating temperature comparable to that required for conventional sintering. At higher current densities, a temperature rise greater than 2000 °C was reached, which resulted in abnormal grain growth and temperature instability. Microstructural analysis demonstrated that finer grain size can be achieved by limiting the current in order to avoid high specimen temperatures. Experiments varying the thickness of the green compact resulted in higher heat loss due to thermal conduction and corresponding reduction in final density. A replacement to the blackbody radiation model was successfully used to fit the data and explain all effects based on Joule heating as well as provide a flash sintering processing map incorporating furnace temperature, power dissipation, and sample geometry.

36 MATERIALS SCIENCE↗

Type Ia Supernova Explosions From Hybrid Carbon–Oxygen–Neon White Dwarf Progenitors

Motivated by recent results in stellar evolution that predict the existence of hybrid white dwarf (WD) stars with a C–O core inside an O–Ne shell, we simulate thermonuclear (Type Ia) supernovae from these hybrid progenitors. We use the FLASH code to perform multidimensional simulations in the deflagration-to-detonation transition (DDT) explosion paradigm. Our hybrid progenitor models were produced with the MESA stellar evolution code and include the effects of the Urca process, and we map the progenitor model to the FLASH grid. We performed a suite of DDT simulations over a range of ignition conditions consistent with the progenitor's thermal and convective structure assuming multiple ignition points. To compare the results from these hybrid WD stars to previous results from C–O WDs, we construct a set of C–O WD models with similar properties and similarly simulate a suite of explosions. We find that despite significant variability within each suite, trends distinguishing the explosions are apparent in their ${}^{56}\mathrm{Ni}$ yields and the kinetic properties of the ejecta. We compare our results with other recent work that studies explosions from these hybrid progenitors.

79 ASTRONOMY AND ASTROPHYSICS↗

Photothermally activated motion and ignition using aluminum nanoparticles

The aluminum nanoparticles (Al NPs) are demonstrated to serve as active photothermal media, to enhance and control local photothermal energy deposition via the photothermal effect activated by localized surface plasmon resonance (LSPR) and amplified by Al NPs oxidation. The activation source is a 2-AA-battery-powered xenon flash lamp. The extent of the photothermally activated movement of Al NPs can be {approx}6 mm. Ignition delay can be {approx}0.1 ms. Both scanning electron microscopy and energy-dispersive X-ray spectroscopy measurements of motion-only and after-ignition products confirm significant Al oxidation occurs through sintering and bursting after the flash exposure. Simulations suggest local heat generation is enhanced by LSPR. The positive-feedback effects from the local heat generation amplified by Al oxidation produce a large increase in local temperature and pressure, which enhances movement and accelerates ignition.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

HST images flash ionization of old ejecta by the 2011 eruption of recurrent Nova T PYXIDIS

T Pyxidis is the only recurrent nova known to be surrounded by knots of material ejected in previous outbursts. Following the eruption that began on 2011 April 14.29, we obtained seven epochs (from 4 to 383 days after eruption) of Hubble Space Telescope narrowband Hα images of T Pyx. The ionizing flash of radiation from the nova event had no discernible effect on the surrounding ejecta until at least 55 days after the eruption began. Photoionization of hydrogen located north and south of the central star was seen 132 days after the beginning of the eruption. That photoionized hydrogen recombined in the following 51 days, allowing us to determine a hydrogen atom density of at least 7×10{sup 5} cm{sup −3}—at least an order of magnitude denser than the previously detected, unresolved [N ii] knots surrounding T Pyx. Material to the northwest and southeast was photoionized, and became bright between 132 and 183 days after the eruption began. Ninety-nine days later that northwest and southeast hydrogen had recombined. Both then (282 days after outburst) and 101 days later, we detected almost no trace of hydrogen emission around T Pyx. We determine that there is a large reservoir of previously unseen, cold diffuse hydrogen overlapping the previously detected, [N ii]-emitting knots of T Pyx ejecta. The mass of this newly detected hydrogen is model-dependent, but is is probably an order of magnitude larger than that of the [N ii] knots. We also determine that there is no significant reservoir of undetected hydrogen-rich ejecta, with density comparable to the flash-ionized ejecta we have detected, from the outer boundaries of the previously detected ejecta out to about twice that distance. The lack of distant ejecta is consistent with the Schaefer et al. scenario for T Pyx, in which the star underwent its first eruption within five years of 1866 after many millennia of quiescence, followed by the six observed recurrent nova eruptions since 1890. The lack of distant ejecta, demonstrated by our observations, is not consistent with scenarios in which T Pyx has been erupting continuously as a recurrent nova for many centuries or millennia.

79 ASTRONOMY AND ASTROPHYSICS↗

District heating utilizing waste heat of a data center: High-temperature heat pumps

Data centers are energy-intensive facilities with substantial low-grade waste heat. High-temperature heat pumps can be critical in boosting the data center’s waste heat for district heating, improving the system-level energy efficiency of data centers, and reducing CO 2 emissions in district heating. This study built thermodynamic models to assess high-temperature heat pumps with six configurations using low global warming potential refrigerants to supply heat up to 120 °C. The heat pump configurations include single-stage or two-stage cycles with advanced components, such as internal heat exchanger, economizer, flash tank, or parallel compressor. The refrigerants include R1234ze(Z), R1233ed(E), R1224yd(Z), R600, and R600a, and R245fa is used as a reference. A case study was carried out to recover the waste heat from the Frontier high-performance computing data center and provide hot water for district heating at the US Department of Energy’s Oak Ridge National Laboratory campus. The optimized performance of high-temperature heat pumps is characterized with various effectiveness of internal heat exchangers, and the operating parameters of economizer or flash tank, as well as their combination. The results show that the configurations of two-stage cycles with internal heat exchanger + flash tank and internal heat exchanger + economizer/parallel-compressor provide the highest coefficient of performance under scenarios of the maximum allowable value and a fixed value (0.3) of the internal heat exchangers’ effectiveness, respectively. R1234ze(Z) and R600a are the most promising refrigerants, considering trade-offs between the coefficient of performance and the volumetric heating capacity. The single-stage cycle with internal heat exchanger + economizer/parallel-compressor using R1234ze(Z) is recommended for utilizing Fronter’s waste heat in district heating. A one mega-watt high-temperature heat pump will reduce 33,100–33,200 metric tons of CO2 emission annually, corresponding to 85.4 %–85.6 % of equivalent CO2 emissions from natural gas boilers. Here, this study provides good guidelines for designing and deploying high-temperature heat pumps to support sustainable data centers and decarbonize district heating in the US.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Flash electropolishing of BCC Fe and Fe-based alloys

The preparation of transmission electron microscopy (TEM) samples is a critical step in the characterization of materials, and the focused ion beam (FIB) technique is a commonly used method. However, a significant limitation of this technique is the FIB-induced damages on the foil surfaces, which can obscure the real features of interest, particularly in radiation effects studies. To overcome this limitation, this study presents a detailed description of the flash electropolishing technique, which can be used to remove the FIB damage from samples. The flash electropolishing technique has been successfully applied to a range of materials, including Fe, Fe-based model alloys, commercial Fe-Cr alloys, and advanced Fe-Cr alloys, both in their as-received and ion-irradiated states. Furthermore, the parameters used for Fe-Cr model alloys can be adjusted for commercial and advanced alloys with minimal modifications. Further, the study also examined the effects of electropolishing variables, such as perchloric acid concentration, electropolishing temperature, Cr concentration, and voltage. Qualitatively, a general trend and scoping test strategy is explored in our experiments. Overall, the flash electropolishing technique offers a promising solution to the challenges posed by FIB-induced damages in the preparation of TEM samples.

36 MATERIALS SCIENCE↗

An Analysis of Input Parameters for Film-Based Flash X-Ray Radiography

Flash X-ray radiography (flash) is a commonly used diagnostic technique in dynamic experiments. An analysis of the effects of input parameters on resulting metrics of image quality can aid the experimentalist in configuring the X-ray input parameters to produce the highest quality radiograph for a given experiment. Here, a flash X-ray test bed with HS800 film and a LANEX Medium F intensifier screen was used with an L3 450 kVp pulser and Scandiflash X-ray tube for this study. Input parameters including charge voltage, source filtering, and film-pack assembly were investigated for their impact on contrast-to-noise ratio (CNR), contrast, and contrast transfer function (CTF). Using VIDAR’s NDT Pro industrial film digitizer, scanner parameters such as optical density range, pixel spacing, scan mode, and digital bit-depth were also examined for their impact on image quality metrics. The highest CNR values were found with two LANEX intensifiers and no filtering. Charge voltage had no direct impact on CNR values. LANEX screen count and filtering resulted both in direct effects on CNR and interaction effects with each other and CNR value. Uncertainty bounds for CNR comparisons and repeatability of CTF evaluations are also discussed. Finally, the film results are compared with a previous study using other detector types, specifically Carestream INDUSTREX Flex GP, Flex HR, Flex XL Blue, and HPX-DR 3543.

dynamic radiography↗

Flash (Ultra-Rapid) Spark-Plasma Sintering of Silicon Carbide

A new ultra-rapid process of flash spark plasma sintering is developed. The idea of flash spark plasma sintering (or flash hot pressing - FHP) stems from the conducted theoretical analysis of the role of thermal runaway phenomena for material processing by flash sintering. The major purpose of the present study is to theoretically analyze the thermal runaway nature of flash sintering and to experimentally address the challenge of uncontrollable thermal conditions by the stabilization of the flash sintering process through the application of the external pressure. The effectiveness of the developed FHP technique is demonstrated by the few seconds–long consolidation of SiC powder in an industrial spark plasma sintering device. Specially designed sacrificial dies heat the pre-compacted SiC powder specimens to a critical temperature before applying any voltage to the powder volume and allowing the electrode-punches of the SPS device setup to contact the specimens and pass electric current through them under elevated temperatures. The experimental results demonstrate that flash sintering phenomena can be realized using conventional SPS devices. The usage of hybrid heating SPS devices is pointed out as the mainstream direction for the future studies and utilization of the new flash hot pressing (ultra-rapid spark plasma sintering) technique.

36 MATERIALS SCIENCE↗

Techno-Economics of Cogeneration Approaches for Combined Power and Desalination From Concentrated Solar Power

For many decades, integration of concentrated solar power (CSP) and desalination relied solely on the use of conventional steam Rankine cycles with thermally based desalination technologies. However, CSP research focus is shifting toward the use of supercritical CO 2 Brayton cycles due to the significant improvement in thermal efficiencies. Here, we present a techno-economic study that compares the generated power and freshwater produced from a CSP system operated with a Rankine and Brayton cycle. Such a study facilitates co-analysis of the costs of producing both electricity and water among the other trade-off assessments. To minimize the levelized cost of water (LCOW), a desalination facility utilizing multi-effect distillation with thermal vapor compression (MED/TVC) instead of multistage flash distillation (MSF) is most suitable. The techno-economic analysis reveals that in areas where water production is crucial to be optimized, although levelized cost of electricity (LCOE) values are lowest for wet-cooled recompression closed Brayton cycle (RCBR) with MSF (12.1 cents/kWh e ) and MED/TVC (12.4 cents/kWh e ), there is only a 0.35 cents/kWh e increase for dry-cooled RCBR with MED/TVC to a cost of 12.8 cents/kWh e . In conclusion, this suggests that the best candidate for optimizing water production while minimizing both LCOW and LCOE is dry-cooled RCBR with MED/TVC desalination.

14 SOLAR ENERGY↗

Substrate Effects When Using Photons to Make Perovskite Solar Cells

To shorten annealing time and minimize substrate heating, flash lamps that deliver short, intense light pulses, commonly called photonic curing, are used to replace thermal annealing using hot plates or ovens. This method is different from equilibrium heating in that the radiant energy is selectively absorbed by the film. The high-intensity light pulses produce a high peak temperature in the film. Because most processes follow Arrhenius behavior, reaching high temperatures allow chemical reactions/phase transformations to occur in a short time, significantly reducing the processing time. Often the results are non-intuitive. We will present fabricating flexible halide perovskite solar cells (PSCs) on indium tin oxide (ITO) coated Willow glass. The effect of ITO transmittance on the photonic curing of nickel nitrate sol-gel precursors into nickel oxide to fabricate hole transport layer and consequently the performance of PSCs. Unexpectedly, ITO samples processed by photonic curing show improved optical and electrical properties.

14 SOLAR ENERGY↗

EXAMINING SUBGRID MODELS OF SUPERMASSIVE BLACK HOLES IN COSMOLOGICAL SIMULATION

Although supermassive black holes (SMBHs) play an important role in galaxy and cluster evolution, at present they can only be included in large-scale cosmological simulation via subgrid techniques. However, these subgrid models have not been studied in a systematic fashion. Using a newly developed fast, parallel spherical overdensity halo finder built into the simulation code FLASH, we perform a suite of dark matter-only cosmological simulations to study the effects of subgrid model choice on relations between SMBH mass and dark matter halo mass and velocity dispersion. We examine three aspects of SMBH subgrid models: the choice of initial black hole seed mass, the test for merging two black holes, and the frequency of applying the subgrid model. We also examine the role that merging can play in determining the relations, ignoring the complicating effects of SMBH-driven accretion and feedback. We find that the choice of subgrid model can dramatically affect the black hole merger rate, the cosmic SMBH mass density, and the low-redshift relations to halo properties. We also find that it is possible to reproduce observations of the low-redshift relations without accretion and feedback, depending on the choice of subgrid model.

79 ASTRONOMY AND ASTROPHYSICS↗

Optics modification of the electron collector for the Relativistic Heavy Ion Collider Electron Beam Ion Source

The Electron Beam Ion Source (EBIS) for the Relativistic Heavy Ion Collider (RHIC) at the Brookhaven National Laboratory (BNL) operates with electron beam current up to 10 A and frequency up to 4-5 Hz. The observation of the vacuum conditions and the temperature of the electron repeller electrode inside the electron collector (EC) points to heavy heating of this electrode by the backscattered electrons generated by the primary electron beam on the inner surfaces of the EC. The ion optics adjacent to the EC operates at potentials of up to 50 kV and higher and the flashes of the desorbed gas may cause discharges and have detrimental effect on the vacuum conditions in the ion trap, and possible instability of the extracted ion beam. The proposed modification of the EC optics has a goal of eliminating the heating of the internal EC electrodes with preservation of the existing structure of the ion optics. The results of computer simulations of the electron beam dissipation and ion extraction are presented.

43 PARTICLE ACCELERATORS↗

Optics modification of the electron collector for the Relativistic Heavy Ion Collider Electron Beam Ion Source

The Electron Beam Ion Source (EBIS) for the Relativistic Heavy Ion Collider (RHIC) at the Brookhaven National Laboratory (BNL) operates with electron beam current up to 10 A and frequency up to 4-5 Hz. The observation of the vacuum conditions and the temperature of the electron repeller electrode inside the electron collector (EC) points to heavy heating of this electrode by the backscattered electrons generated by the primary electron beam on the inner surfaces of the EC. The ion optics adjacent to the EC operates at potentials of up to 50 kV and higher and the flashes of the desorbed gas may cause discharges and have detrimental effect on the vacuum conditions in the ion trap, and possible instability of the extracted ion beam. The proposed modification of the EC optics has a goal of eliminating the heating of the internal EC electrodes with preservation of the existing structure of the ion optics. The results of computer simulations of the electron beam dissipation and ion extraction are presented.

43 PARTICLE ACCELERATORS↗

Rapid synthesis of phase-engineered tungsten carbide electrocatalysts via flash joule heating for high-current-density hydrogen evolution

Fabricating durable and high-performance electrocatalysts operating at high current densities for industrial acidic hydrogen evolution remains a daunting challenge. Tailoring the phase composition of electrocatalysts is a promising strategy to harness synergistic effects and improve charge transfer, thereby optimizing their performance. Here, this work presents a fast, green method based on flash joule heating (FJH) to synthesize phase-engineered tungsten carbide electrocatalysts for the acidic hydrogen evolution reaction (HER) at high current densities. Tungsten carbide electrodes with varying FJH treatment durations (3, 10, 30, and 60 s) are fabricated to fine-tune the mixture of tungsten monocarbide (WC) and tungsten semicarbide (W 2 C) phases. Results show that samples with a 30-s treatment (TC-3) exhibit an optimal balance between these phases, leading to a low overpotential of 180.97 and 387 mV at current densities of 10 mA/cm 2 and 4 A/cm 2 , respectively. TC-3 exhibits significantly lower charge transfer resistance compared to the other electrocatalysts, which can be attributed to its optimal phase ratio. Notably, the TC-3 electrocatalyst remains stable for over 9 days at 4 A/cm 2 due to their controlled phases and excellent corrosion-resistant properties. This work highlights a new method to fabricate cost-effective, high-performance tungsten carbide electrocatalysts with well-controlled phase compositions.

Acidic hydrogen evolution reaction↗