Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Environment”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

High Conduction Neutron Absorber to Simulate Fast Reactor Environment in an Existing Test Reactor

A need was determined for a thermal neutron absorbing material that could be cooled in a gas reactor environment without using large amounts of a coolant that would thermalize the neutron flux. A new neutron absorbing material was developed that provided high conduction so a small amount of water would be sufficient for cooling thereby thermalizing the flux as little as possible. An irradiation experiment was performed to assess the effects of radiation and the performance of a new neutron absorbing material. Neutron fluence monitors were placed inside specially fabricated holders within a set of drop-in capsules and irradiated for up to four cycles in the Advanced Test Reactor. Following irradiation, the neutron fluence monitor wires were analyzed by gamma and x-ray spectrometry to determine the activities of the activation products. The adjusted neutron fluences were calculated and grouped into three bins – thermal, epithermal and fast to evaluate the spectral shift created by the new material. Fluence monitors were evaluated after four different irradiation periods to evaluate the effects of burn-up in the absorbing material. Additionally, activities of the three highest activity isotopes present in the specimens are given.

Reactor dosimetry, advanced test reactor, Al3Hf sh↗

Localization of a radioactive source in an urban environment using Bayesian Metropolis methods [Bayesian Metropolis methods for source localization in an urban environment]

Here, we present a method for localizing an unknown source of radiation in an urban environment using a distributed detector network. This method employs statistical parameter estimation techniques, relying on an approximation for the response of a detector to the source based on a simplified model of the underlying transport phenomena, combined with a Metropolis-type sampler that is modified to propagate the effect of fixed epistemic uncertainties in the material macroscopic cross sections of objects in the scene. We apply this technique to data collected during a measurement campaign conducted in a realistic analog for an urban scene using a network of six mobile detectors. Our initial results are able to localize the source to within approximately 8 m over a scene of size 300 m 200 m in two independent trials with 30 min count times, including a characterization of the uncertainty associated with the poorly known macroscopic cross sections of objects in the scene. In these measurements, the nearest detectors were between 20 m to 30 m from the source, and recorded count rates between approximately 3 and 13 times background. A few detectors had line-of-sight to the source, while the majority were obscured by objects present in the scene. After extending our model to account for the orientation of the detectors and correcting for anomalies in the measurement data we were able to further improve the localization accuracy to approximately 2 m in both trials.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Effect of Composition and Local Environment on CO 2 Adsorption on Nickel and Magnesium Oxide Solid Solutions

CO 2 adsorption energies on the (100) surfaces of a nickel oxide doped with Mg, magnesium oxide doped with Ni, and their 50:50 solid solution were calculated using density functional theory. The composition and atomic arrangement of the adsorption site was varied to understand how the local environment affects CO 2 adsorption and the basicity of the surfaces at the atomic level. The dispersive and electronic contributions to the adsorption energies were quantified, and the results indicate that the variation of the adsorption energy with adsorption site configuration and metal composition is dominated by electronic interactions. Interestingly, for magnesium oxide doped with nickel, a single substitution can create stronger CO 2 binding sites, which implies stronger basic sites, even though nickel oxide is less basic than magnesium oxide. The effect of double substitution at the binding site can be reasonably approximated by summing the effects of single substitutions. Furthermore, this work provides guidance for the preparation of metal oxides with tailored Lewis basicity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Observation of Surface-Bound Negatively Charged Hydride and Hydroxide on GaP(110) in H 2 O Environments

Surface-bound species on GaP(110) formed upon interaction with water were investigated through experiment and theory. These studies are motivated by and discussed in the context of electrocatalytic and photoelectrocatalytic schemes for solar fuel production, including especially observations of selective CO 2 reduction to methanol in acidified aqueous solutions of CO 2 and nitrogen-containing heteroaromatics. Experimentally, surface-bound species over ten orders of magnitude of pressure were spectroscopically identified in situ using synchrotron-based ambient pressure photoelectron spectroscopy (APPES). Ga 3d and O 1s core-level spectra indicate that the interaction of GaP(110) with H 2 O induces formation of a partially dissociated adlayer, characterized by the presence of both Ga-OH and molecular H 2 O species. Measurements of the P 2p core level indicate formation of a negatively charged hydride that irreversibly bonds to surface P in vacuum. The surface densities of the hydroxide and hydride species increase with increasing pressure (surface coverage) of water. Periodic slab calculations using density functional theory were used to study several relevant water configurations at 298 K on this surface. Consistent with earlier theoretical predictions at 0 K, the calculations confirm that Ga-OH, molecular H 2 O, and P-H species are thermodynamically stable on the GaP(110) surface under experimental conditions. Isobaric measurements at elevated pressures were used to probe the thermal stabilities of adsorbed species as well as the oxidation of surface Ga and P. The observation of stable surface hydride formation induced by interaction with water is especially notable given the critical role of hydride transfer to catalysts and CO 2 during chemical fuel synthesis reactions in aqueous environments. Furthermore, it is hypothesized that the observed high stability of the hydride on GaP may contribute to its associated remarkable near-100% faradaic efficiency for methanol generation by solar-driven CO 2 reduction in acidified aqueous pyridine solutions [J. Am. Chem. Soc. 2008, 130, 6342], because such stability is known to yield high overpotentials for the competing hydrogen evolution reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Photoinduced Carbon Dioxide Release via a Metastable Photoacid in a Nonaqueous Environment

Capturing and concentrating carbon dioxide (CO 2 ) from the atmosphere is an important modern scientific and technological challenge. CO 2 can be captured by forming a carbamate bond with amines, most notably monoethanolamine (MEA). Regenerating MEA by releasing the captured CO 2 requires heating the carbamate solution, which is energy-demanding and wasteful. Recently, photoacids were used to convert light input into pH change, which in turn released CO 2 from aqueous carbonate solutions. Here, we report a merocyanine photoacid that releases CO 2 from a non-aqueous carbamate solution of MEA, thereby extending the utility of this concept to a wider range of capture agents and environments. Based on the absorption spectra of the photoacid in the presence of acids and CO 2 , we show that the photoacid cycle and the CO 2 capture of MEA are two separate equilibria that are coupled to each other via protons. Then, we demonstrate that irradiating 405 nm light on the sample can induce release of CO 2 which we detect using an in-line mass spectrometer. This work highlights an alternative path for optimizing a photo-induced CO 2 capture and release system.

Amines↗

Charge Hopping Dynamics along a Disordered Chain in Quantum Environments: Comparative Study of Different Rate Kernels

This work presents a computational study of charge hopping dynamics along a one-dimensional chain with Gaussian site energy disorder and linearly coupled quantum bath. Time dependent square displacements are calculated directly from numerical solutions of Pauli master equations, for five different rate kernels: exact Fermi golden rule (FGR) rate expression, stationary phase interpolation (SPI) approximation, semiclassical (SC) approximation, classical Marcus rate expression, and Miller-Abrahams expression. All results demonstrate diffusive behavior in the steady state limit. The results based on the FGR rate expression show that the charge transport in the quantum bath can be much more sensitive to the disorder than the prediction from the classical Marcus expression. While the SPI approximation captures this general trend reasonably well, the SC approximation tends to be unreliable at both quantitative and qualitative levels and becomes even worse than the classical Marcus expression under certain conditions. Furthermore, these results offer useful guidance in the choice of approximate rate kernels for larger-scale simulations and also demonstrate significant but fragile positive effects of quantum environments on the charge hopping dynamics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Amphiphilic chlorins and bacteriochlorins in micellar environments. Molecular design, de novo synthesis, and photophysical properties

The incorporation of amphiphilic tetrapyrrole macrocycles in organized media is of great value for a variety of fundamental photochemical studies, yet work to date has chiefly employed porphyrins rather than chlorins or bacteriochlorins. The latter absorb strongly in the red or near-infrared spectral region, respectively. Here, eight amphiphilic macrocycles (six chlorins and two bacteriochlorins) have been designed, synthesized and characterized; the compounds differ in long wavelength absorption (610–745 nm) and peripheral substituents (type of auxochrome, hydrophobic/hydrophilic groups). A methyl pyridinium or benzoic acid substituent at the 15-position provides a polar “tail” whereas a hydrophobic group distal thereto (in the chlorins) provides a lipophilic “head” for the spontaneous incorporation in organized media. The eight (bacterio)chlorins are characterized by static and time-resolved absorption and fluorescence spectroscopy in N,N-dimethylformamide (DMF) and three micellar environments (TX-100, CTAB, and SDS) as well as ultrafast transient absorption studies in DMF.

14 SOLAR ENERGY↗

Probing environment fluctuations by two-dimensional electronic spectroscopy of molecular systems at temperatures below 5 K

Two-dimensional (2D) electronic spectroscopy at cryogenic and room temperatures reveals excitation energy relaxation and transport, as well as vibrational dynamics, in molecular systems. These phenomena are related to the spectral densities of nuclear degrees of freedom, which are directly accessible by means of hole burning and fluorescence line narrowing approaches at low temperatures (few K). The 2D spectroscopy, in principle, should reveal more details about the fluctuating environment than the 1D approaches due to peak extension into extra dimension. By studying the spectral line shapes of a dimeric aggregate at low temperature, we demonstrate that 2D spectra have the potential to reveal the fluctuation spectral densities for different electronic states, the interstate correlation of static disorder and, finally, the time scales of spectral diffusion with high resolution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A dissolution-precipitation mechanism is at the origin of concrete creep in moist environments

Long-term creep (i.e., deformation under sustained load) is a significant material response that needs to be accounted for in concrete structural design. However, the nature and origin of concrete creep remain poorly understood and controversial. Here, we propose that concrete creep at relative humidity ≥ 50%, but fixed moisture content (i.e., basic creep), arises from a dissolution-precipitation mechanism, active at nanoscale grain contacts, as has been extensively observed in a geological context, e.g., when rocks are exposed to sustained loads, in liquid-bearing environments. Based on micro-indentation and vertical scanning interferometry data and molecular dynamics simulations carried out on calcium–silicate–hydrate (C–S–H), the major binding phase in concrete, of different compositions, we show that creep rates are correlated with dissolution rates—an observation which suggests a dissolution-precipitation mechanism as being at the origin of concrete creep. C–S–H compositions featuring high resistance to dissolution, and, hence, creep are identified. Analyses of the atomic networks of such C–S–H compositions using topological constraint theory indicate that these compositions present limited relaxation modes on account of their optimally connected (i.e., constrained) atomic networks.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Imaging the Local Charge Environment of Nitrogen-Vacancy Centers in Diamond

Characterizing the local internal environment surrounding solid-state spin defects is crucial to harnessing them as nanoscale sensors of external fields. This is especially germane to the case of defect ensembles which can exhibit a complex interplay between interactions, internal fields, and lattice strain. Working with the nitrogen-vacancy (NV) center in diamond, we show that local electric fields dominate the magnetic resonance behavior of NV ensembles at a low magnetic field. We propose a simple microscopic model that quantitatively captures the observed spectra for samples with NV concentrations spanning more than two orders of magnitude. Motivated by this understanding, we propose and implement a new method for the nanoscale localization of individual charges within the diamond lattice; our approach relies upon the fact that the charge induces a NV dark state which depends on the electric field orientation.

74 ATOMIC AND MOLECULAR PHYSICS↗

PV Ramping in a Distributed Generation Environment: A Study Using Solar Measurements; Preprint

Variability in Photovoltaic (PV) generation resulting from variability in the solar radiation over the PV arrays is a topic of continuing concern for those involved with integrating renewables onto existing electrical grids. The island of Lanai, Hawaii is an extreme example of the challenges that integrators will face due to the fact that it is a small standalone grid. One way to study thisproblem is to take high-resolution solar measurements in multiple locations and model simultaneous PV production for various sizes at those locations. The National Renewable Energy Laboratory (NREL) collected high-resolution solar data at four locations on the island where proposed PV plants will be deployed in the near future. This data set provides unique insight into how the solar radiationmay vary between points that are proximal in distance, but diverse in weather, due to the formation of orographic clouds in the center of the island. Using information about each proposed PV plant size, power output was created at high resolution. The team analyzed this output to understand power production ramps at individual locations and the effects of aggregating the production from all fourlocations. Hawaii is a unique environment, with extremely variable events occurring on a daily basis. This study provided an excellent opportunity for understanding potential worst-case scenarios for PV ramping. This paper provides an introduction to the datasets that NREL collected over a year and a comprehensive analysis of PV variability in a distributed generation scenario.

14 SOLAR ENERGY↗

Design and instrumentation for permanent magnet samples exposed to a radiation environment

This work is part of a larger program to study the effects of radiation on permanent magnets in an accelerator environment. In order to be sure that the permanent magnet samples are accurately placed, measured, and catalogued we have developed a system of sample racks, holders and measuring apparatuses. We have combined these holders and measurement racks with electronics to allow a single computer to catalogue the position and intensity of the magnet measurements. We outline the design of the apparatus, the collection software, and the methodology we will use to collect the data.

Accelerator Physics↗