Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Emissivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

X-ray emission from young supernova remnants - Nonionization equilibrium abundances and emissivities

X-ray line emission from hot, low-density plasma in young supernova remnants is strongly enhanced by departures from ionization equilibrium. The X-ray emission from a Sedov blast wave has been calculated using a nonequilibrium evolutionary treatment of the ionization structure, and the resulting spectrum has been fitted to HEAO 2 SSS data for Tycho's remnant. These models yield dramatically different elemental abundances for heavy elements (Ne, Mg, Si, S, Ar, Ca, and Fe), compared with two-temperature component equilibrium models of Becker et al. (1979, 1980). Nonequilibrium broad-band X-ray emissivities result in lower mass determinations for the supernova ejecta. Areas of further improvement of remnant X-ray modeling are suggested.

Shull, J. M.↗
NASA NTRS1985

Electron emission and acoustic emission from the fracture of graphite/epoxy composites

In past studies it has been shown that the fracture of materials leads to the emission of a variety of species, including electrons, ions, neutral molecules, and photons, all encompassed by the term 'fractoemission' (FE). In this paper, electron emission (EE) from the fracture of single graphite fibers and neat epoxy resin is examined. Measurements of EE are also combined with the detection of acoustic emission (AE) during the testing of graphite-epoxy composite specimens with various fiber orientation. The characteristics of these signals are related to known failure mechanisms in fiber-reinforced plastics. This study suggests that by comparing data from AE and FE measurements, one can detect and distinguish the onset of internal and external failure in composites. EE measurements are also shown to be sensitive to the locus of fracture in a composite material.

Dickinson, J. T.↗
NASA NTRS1985

Theoretical quasar emission-line ratios. VIII - Implications of free-free emission for QSO clouds

A range of simple theoretical models is presented which explores the effects of high densities in the broad-line clouds on near-IR free-free emission. These calculations demonstrate in a qualitiative way that large near-IR fluxes can result from high densities without compromising the observed hydrogen line spectrum. It is suggested that high density in the emission-line region provides a plausible explanation of several features seen in the spectra of QSOs and active galaxies, including (1) the 3-micron bump and/or the near-IR spectral break seen in many QSOs, (2) the low observed Pa-alpha broad-line fluxes seen in some objects, and (3) the highly depressed Br-gamma broad-line fluxes seen in active galaxies. It is also found that free-free emission in such clouds can be an important coolant.

Puetter, R. C.↗
NASA NTRS1985

Implications of the 1400 MHz flare emission from AD Leo for the emission mechanism and flare environment

High brightness temperature spikes have been observed during a radio flare on the M-dwarf flare star AD Leo (Lang et al., 1983). Their high brightness temperature (greater than 10 to the 13th K) and circular polarization indicate that a coherent radiation mechanism must be responsible for the spike emission. The underlying flare emission, which is identified with a low polarization, gradual component, was found not to be spiky to within the 200 ms time resolution of the observations. This note is concerned primarily with this nonspiky emission.

Holman, G. D.↗
NASA NTRS1987

Hydrogen emission from Jupiter: Hydrogen emission from sunlit atmosphere of Saturn

Successful IUE observations of the equatorial sunlit atmosphere of Jupiter and Saturn have been obtained. Spectra containing atomic and molecular hydrogen and solar reflection continuum emissions have been analyzed, with the purpose of determining the long term temporal behavior of the electroglow process. Quantitative estimates have been established for the first time using a model analysis of the short wavelength region of the spectrum. Both systems show varying degrees of long term variability in hydrogen emission rate, but the time scale is too short to determine whether there is a dependence on solar cycle activity. As part of the emission modeling program, a preliminary point source spreading function for the IUE SWP instrument has been established, suggesting a wavelength dependence in spectral line width different from previous analyses. Further IUE observations are planned for both Jupiter and Saturn.

Shemansky, D. E.↗
NASA NTRS1989

Far-infrared emission in the Rho Ophiuchi region - A comparison with molecular gas emission and visual extinction

The dust characteristics of a 40 arcmin x 40 arcmin section of the Rho Ophiuchi molecular clouds complex revealed by the IRAS satellite are compared with both molecular line and deep star count data for the region. The data reveal the cloud to be clearly visible at 12 and 25 microns, as well as at 60 and 100 microns. Modeling the infrared emission from the cloud as being due to two populations of dust grains, the short-wavelength emission is found not to reflect the internal structure of the molecular cloud. The 60 micron opacity determined using a single grain emission model correlates reasonably well with (C-13)O column density and visual extinction up to roughly 5 mag. The cloud edges appear to be heated by the interstellar radiation field. The far-infrared luminosity to mass ratio for the region is determined to be 0.9 solar luminosity/solar mass, a value much smaller than the average ratio for the inner Galaxy.

Jarrett, T. H.↗
NASA NTRS1991

Molecular line emission models of Herbig-Haro objects. I - H2 emission

A comprehensive model for molecular hydrogen emssion in Herbig-Haro objects that are associated with the heads of radiative stellar jets is presented by using a simple representation of the jet head as a comprising a leading bow shock and a trailing jet shock, separated by a dense layer of cool shocked gas. Attention is given to collisional excitation in a nondissociative shock and formation pumping in the molecular reformation zone behind a dissociative shock, employing detailed shock and photodissociation-region emission models that incorporate most of the relevant atomic physics and chemistry. The conditions under which each of these excitation mechanisms may be expected to contribute to the observed emission are discussed, and a general diagnostic scheme for discriminating among them is constructed. Applying this scheme to the HH 1-2 system, strong evidence for excitation by the radiation field of a fast shock is found. It is inferred that FUV pumping contributes a significant fraction of the H2 line emission, and it is shown that this can occur only if the UV pump lines are not strongly self-shielded.

Wolfire, Mark G.↗
NASA NTRS1992

Outer heliospheric radio emissions. I - Constraints on emission processes and the source region

Observations by Voyager 1 and 2 of LF radio emissions near 2 and 3 kHz during the interval 1983-1987 while at heliocentric distances from 15 to 27 AU and 11 to 20 AU, respectively, are reported. Constraints on the emission processes and source characteristics are discussed. Minimum Langmuir wave electric fields in the source region, based solely on the kinematics of the radiation processes, lie in the range 1-100 micro-V/m for nominal source and electron beam parameters. Path lengths for fundamental and harmonic emission processes are calculated. The observed levels of radiation can be produced in path lengths and source dimensions smaller than 1 AU provided the participating Langmuir waves have effective temperatures of about 10 exp 17 K. Previous source models for the radiation are discussed.

Cairns, Iver H.↗
NASA NTRS1993

Infrared coronal emission lines and the possibility of their maser emission in Seyfert nuclei

Energetic emitting regions have traditionally been studied via x-ray, UV and optical emission lines of highly ionized intermediate mass elements. Such lines are often referred to as 'coronal lines' since the ions, when produced by collisional ionization, reach maximum abundance at electron temperatures of approx. 10(exp 5) - 10(exp 6) K typical of the sun's upper atmosphere. However, optical and UV coronal lines are also observed in a wide variety of Galactic and extragalactic sources including the Galactic interstellar medium, nova shells, supernova remnants, galaxies and QSOs. Infrared coronal lines are providing a new window for observation of energetic emitting regions in heavily dust obscured sources such as infrared bright merging galaxies and Seyfert nuclei and new opportunities for model constraints on physical conditions in these sources. Unlike their UV and optical counterparts, infrared coronal lines can be primary coolants of collisionally ionized plasmas with 10(exp 4) less than T(sub e)(K) less than 10(exp 6) which produce little or no optical or shorter wavelength coronal line emission. In addition, they provide a means to probe heavily dust obscured emitting regions which are often inaccessible to optical or UV line studies. In this poster, we provide results from new model calculations to support upcoming Infrared Space Observatory (ISO) and current ground-based observing programs involving infrared coronal emission lines in AGN. We present a complete list of infrared (lambda greater than 1 micron) lines due to transitions within the ground configurations 2s(2)2p(k) and 3s(2)3p(k) (k = 1 to 5) or the first excited configurations 2s2p and 3s3p of highly ionized (x greater than or equal to 100 eV) astrophysically abundant (n(X)/n(H) greater than or equal to 10(exp -6)) elements. Included are approximately 74 lines in ions of O, Ne, Na, Mg, Al, Si, S, Ar, Ca, Fe, and Ni spanning a wavelength range of approximately 1 - 280 microns. We present new results from detailed balance calculations, new critical densities for collisional de-excitation, intrinsic photon rates, branching ratios, and excitation temperatures for the majority of the compiled transitions. The temperature and density parameter space for dominant cooling via infrared coronal lines is presented, and the relationship of infrared to optical coronal lines is discussed.

Greenhouse, Matthew A.↗
NASA NTRS2003

Martian Global Surface Mineralogy from the Thermal Emission Spectrometer: Surface Emissivity, Mineral Map, and Spectral Endmember Data Products

One of the primary goals of the Thermal Emission Spectrometer experiment on the Mars Global Surveyor is to determine the mineralogy of the Martian surface. This information has been used to place constraints on the range of igneous processes present. The extent of water related processes on Mars has been significantly constrained by the TES experiment. The mineralogy of the Martian dust has also been refined using TES data. These mineralogical results have made a significant contribution towards determining the development of Mars, complimenting other datasets and existing information. Mineralogical determination requires the isolation of surface emissivity from the measured radiance and a variety of techniques have been developed for this purpose. Additionally, deconvolution techniques have been developed and extensively tested to separate the individual mineral contributions to the surface emissivity. These methods and techniques have produced a variety of data products that are currently available through http://tes.asu.edu/

J L Bandfield↗
NASA NTRS2011

Variability of Disk Emission in Pre-Main Sequence and Related Stars. II. Variability in the Gas and Dust Emission of the Herbig Fe Star SAO 206462

We present thirteen epochs of near-infrared (0.8-5 microns) spectroscopic observations of the pre-transitional, "gapped" disk system in SAO 206462 (=HD 135344B). In all, six gas emission lines (Br(alpha) , Br(gamma), Pa(beta), Pa(delta), Pa(epsilon), and the 0.8446 microns line of O I) along with continuum measurements made near the standard J, H, K, and L photometric bands were measured. A mass accretion rate of approximately 2 x 10(exp 8)Solar Mass/yr was derived from the Br(gamma) and Pa(beta) lines. However, the fluxes of these lines varied by a factor of over two during the course of a few months. The continuum also varied, but by only approx.30%, and even decreased at a time when the gas emission was increasing. The H I line at 1.083 microns was also found to vary in a manner inconsistent with that of either the hydrogen lines or the dust. Both the gas and dust variabilities indicate significant changes in the region of the inner gas and the inner dust belt that may be common to many young disk systems. If planets are responsible for defining the inner edge of the gap, they could interact with the material on time scales commensurate with what is observed for the variations in the dust, while other disk instabilities (thermal, magneto-rotational) would operate there on longer time scales than we observe for the inner dust belt. For SAO 206462, the orbital period would likely be 1-3 years. If the changes are being induced in the disk material closer to the star than the gap, a variety of mechanisms (disk instabilities, interactions via planets) might be responsible for the changes seen. The He I feature is most likely due to a wind whose orientation changes with respect to the observer on time scales of a day or less. To further constrain the origin of the gas and dust emission will require multiple spectroscopic and interferometric observations on both shorter and longer time scales that have been sampled so far.

Sitko, Michael L.↗
NASA NTRS2019

Four Years of Airborne Measurements of Wildfire Emissions in California, with a Focus on the Evolution of Emissions During the Soberanes Megafire

Biomass burning is an important source of trace gases and particles which can influence air quality on local, regional, and global scales. With wildfire events increasing due to changes in land use, increasing population, and climate change, characterizing wildfire emissions and their evolution is vital. In this work we report in situ airborne measurements of carbon dioxide (CO2), methane (CH4), water vapor (H2O), ozone (O3), and formaldehyde (HCHO) from nine wildfire events in California between 2013 and 2016, which were sampled as part of the Alpha Jet Atmospheric eXperiment (AJAX) based at NASA Ames Research Center. One of those fires, the Soberanes Megafire, began on 22 July 2016 and burned for three months. During that time, five flights were executed to sample emissions near and downwind of the Soberanes wildfire. In situ data are used to determine enhancement ratios (ERs), or excess mixing ratio relative to CO2, as well as assess O3 production from the fire. Changes in the emissions as a function of fire evolution are explored. Air quality impacts downwind of the fire are addressed using ground-based monitoring site data, satellite smoke products, and the Community Multiscale Air Quality (CMAQ) photochemical grid model.

Iraci, Laura T.↗
NASA NTRSDate not supplied

Particle and Trace Gas Emissions Indices Measured During the 2021 Boeing ecoDemonstrator Emissions Ground Test

We present particle and trace gas emissions indices sampled on the ground at 30 meters behind the CFM LEAP-1B engines of the 2021 Boeing ecoDemonstrator, an Alaska Airlines 737-9 aircraft. Testing was carried out at Boeing Field in Seattle, WA, USA in Fall of 2021. Four different fuels were investigated including a 100% sustainable aviation fuel (SAF), a petroleum-based Jet A fuel, and two SAF blends. Total and non-volatile particle number concentrations were measured with a pair of condensation particle counters with one operating behind a custom-built thermal denuder heated to 350 degrees Celsius. Similarly, total and non-volatile particle number size distributions were measured with a pair of Scanning Mobility Particle Sizers (SMPSs). Non-volatile particle mass was estimated from particle light absorption techniques using an assumed mass absorption coefficient, while particle chemical speciation was measured by an Soot Particle Aerosol Mass Spectrometer (SP-AMS). A detailed list of instruments is given on the project website [1]. Overall, the results are consistent with expectations based on ICAO Emissions Databank certification data for the LEAP-1B with a stark reduction in non-volatile particle number and mass observed for the higher thrust conditions when the combustor was staged. The production of volatile particles under these conditions as well as experimental considerations related to background subtraction methods will be discussed. References: [1] Boeing ecoDemonstrator Science and Engineering Team (2022). 2021 Boeing ecoDemonstrator Emissions Ground Test Dataset

Richard H Moore↗
DOE OSTI2025

Data for Bistline, et al. (2025) "Policy Implications of Net-Zero Emissions: A Multi-Model Analysis of United States Emissions and Energy System Impacts"

These files contain input assumptions, results, and figures associated with the Bistline, et al. (2025) article "Policy Implications of Net-Zero Emissions: A Multi-Model Analysis of United States Emissions and Energy System Impacts" in Energy and Climate Change as part of the Energy Modeling Forum 37 study. Please refer to the original paper for details.

climate policy↗
DOE OSTI2021

Machine Learning Reduced Order Model for Cost and Emission Assessment of a Pyrolysis System

Biomass pyrolysis is a promising approach for producing economic and environmentally-friendly fuels and bioproducts. Biomass pyrolysis experiments show that feedstock properties have a significant impact on product yields and composition. Scientists are developing detailed chemical reaction mechanisms to capture the relationships between biomass composition and pyrolysis yields. These mechanisms can be computationally intensive. In this study, we investigate the use of a machine learning reduced order model (ROM) for assessing the costs and emissions of a pyrolysis biorefinery. Here, we developed a Kriging-based ROM to predict pyrolysis yields of 314 feedstock samples based on the results of a detailed chemical kinetic pyrolysis mechanism. The ROM is integrated into a chemical process model for calculating mass and energy yields in a commercial-scale (2000 tonne/day) biorefinery. The ROM estimated biofuel yields of 65 to 130 gallons per ton of dry biomass. This results in biofuel minimum fuel-selling prices of $2.62 to $5.43 per gallon and emissions of -13.62 to 145 kg of CO 2 per MJ. The ROM achieved an average mean square error of 1.8e-20 and a mean absolute error of 0.53%. These results suggest that ROMs can facilitate rapid feedstock screening for biorefinery systems.

09 BIOMASS FUELS↗
DOE OSTI2022

Generating Bright Emissive States by Modulating the Bandgap of Monolayer Tungsten Diselenide

Transition metal dichalcogenides (TMDs) are essential due to their fascinating electronic and optical properties, strong exciton binding energy, and layer-dependent bandgap. They can be tuned to function as a single-photon emitter, but the quantum yield of photoluminescence of single-layer WSe 2 is low. There is some evidence that a bright emissive state can be produced by introducing local defects through functionalization. In this paper we use spin-polarized periodic density functional theory (DFT) to study the effect of functionalization for the specific case of cyclic carbenes. We find that the simplest of these molecules, cyclopentadiene carbene (Cyc), binds to the surface by a covalent bond leading to a substantial change in the bandgap (1.24 eV compared to 1.64 eV for the pristine surface). Moreover, there are semiflat bands below the Fermi level that originate from σ bonding and the interaction between the lone-pair p orbitals on the carbon of Cyc that bonds with Se on the TMD. Cyc is found to form a Type IIa heterojunction before and after contact with the surface, where the “a” refers to ordering of the energy levels where the TMD levels have the larger splitting and “b” to the reverse. The effect of various electron-withdrawing and electron-donating groups on Cyc is investigated, and it is found that the direct bandgap and heterointerfaces can be chemically tuned with covalently bound functional groups. With an electron-withdrawing group (EWG) such as –CHO, –COCl, and –CN attached to Cyc, a Type III//Type IIa interface is formed, whereas all other EWGs used in this study form a Type IIa junction, before and after contact to the surface. The electron-donating groups (EDG) form Type Ib//Type Ia junctions, and in particular, we find that the system WSe 2 + Cyc-Me band structure consists of semiflat bands at valence band maxima localized on Cyc-Me and the conduction band minimum is coupled between the surface and functional group with a direct bandgap of 0.88 eV. Hence, we predict that the Cyc-Me-functionalized monolayer WSe 2 will produce a red-shifted bright emissive state. Furthermore, we also find that carbenes with the Cyc all-carbon ring have (1) a triplet ground state and (2) form covalent bonds to WSe 2 , while heterocyclic carbenes (1) have a singlet ground state and (2) do not form covalent bonds to WSe 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗