Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Electric polarization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS2011

Short Wavelength Electromagnetic Perturbations Excited Near the Solar Probe Plus Spacecraft in the Inner Heliosphere: 2.5D Hybrid Modeling

A 2.5D numerical plasma model of the interaction of the solar wind (SW) with the Solar Probe Plus spacecraft (SPPSC) is presented. These results should be interpreted as a basic plasma model derived from the SW-interaction with the spacecraft (SC), which could have consequences for both plasma wave and electron plasma measurements on board the SC in the inner heliosphere. Compression waves and electric field jumps with amplitudes of about 1.5 V/m and (12-18) V/m were also observed. A strong polarization electric field was also observed in the wing of the plasma wake. However, 2.5D hybrid modeling did not show excitation of whistler/Alfven waves in the upstream connected with the bidirectional current closure that was observed in short-time 3D modeling SPPSC and near a tether in the ionosphere. The observed strong electromagnetic perturbations may be a crucial point in the electromagnetic measurements planned for the future Solar Probe Plus (SPP) mission. The results of modeling electromagnetic field perturbations in the SW due to shot noise in absence of SPPSC are also discussed.

Lipatov, Alexander S.↗
NASA NTRS1986

Electric field measurements during the Condor critical velocity experiment

The instrumentation of the Condor critical velocity Ba experiment (Wescott et al., 1986) for the measurements of the energetic particles and the electric field associated with a Ba explosion is described. The Ba explosion created a complex electric field pulse detected in situ by a single-axis double electric-field probe on a separate spacecraft. The measurements provide evidence of several important links in the critical-velocity chain, and are consistent with two hypotheses. The first hypothesis involves the creation of large polarization electric field due to charge separation; the second hypothesis implies a polarization of the beam by currents flowing across it. The chain of physical processes inferred from the observations is in agreement with most theories for the Alfven process.

Kelley, M. C.↗
NASA NTRS1990

Piezoelectric and pyroelectric effects of a crystalline polymer

Polyvinylidene flouride (PVDF) is a crystalline polymer to both piezoelectric and pyroelectric nature. Piezoelectricity produces electrical signals when mechanically deformed, and pyroelectricity is the electrical polarization induced by thermal absorption in crystals. To demonstrate the piezoelectric effect PVDF is subjected to impact loads which produce electrical charges proportional to mechanical stresses. A heat source was used to demonstrate the pyroelectric nature of PVDF. The rise in temperature due to absorbed energy by the polymer produces electrical output. The qualitative test results obtained are graphically reproduced.

Kundu, Nikhil K.↗
DOE OSTI2022

Effect of chemical substitution and external strain on phase stability and ferroelectricity in two dimensional M 2 CT 2 MXenes

Two dimensional ferroelectric materials are gaining increasing attention for use in ultrathin electronic devices owing to the presence of a spontaneous polarization down to one or two monolayers. However, such materials are difficult to identify, especially those with out-of-plane electric polarizations. Previous work predicted that a metastable ferroelectric phase exists in the 2D MXene Sc 2 CO 2 , while further studies have predicted that this phase exists in other MXene chemistries. However, questions remain about the origin of ferroelectricity, the stability of this phase relative to other competing phases, and the effect of external stimuli in these materials. In this work, we use density functional theory calculations to investigate 12 M 2 CT 2 MXenes (M = transition metal, T = surface terminating group) and determine which have the ferroelectric phase as their ground state. We compute these materials’ polarizations, densities of states, phonon band structures, Bader charges, and Born effective charges in the ferroelectric phase to elucidate the reasons for its stabilization. We demonstrate that this ferroelectric phase can be preferentially stabilized in non-ferroelectric MXenes through full chemical substitution of Sc or O, alloying of the Sc sites, or application of epitaxial strain. Finally, we show that these materials have excellent piezoelectric properties as well. This work provides a detailed understanding of ferroelectric MXenes and show how the number of 2D ferroelectric materials can be increased through chemical substitution or application of external stimuli.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Hybrid MBE Route to Adsorption-Controlled Growth of BaTiO 3 Membranes with Robust Polarization Switching

Freestanding ferroelectric membranes are promising for flexible electronics, nonvolatile memory, photonics, and spintronics, but their synthesis is challenged by the need for reproducibility with precise stoichiometric control. Here, we demonstrate the adsorption-controlled growth of single-crystalline, epitaxial BaTiO 3 films by hybrid molecular beam epitaxy (MBE) on a binary oxide sacrificial layer. Using a simple water-droplet lift-off method, we obtained submillimeter- to millimeter-sized membranes that retained crystallinity, as confirmed by high-resolution X-ray diffraction, and exhibited robust tetragonal symmetry, as verified by Raman spectroscopy. Impedance spectroscopy confirmed a high dielectric constant of ∼1340, reflecting the robust dielectric response of the membranes. Ferroelectric functionality was revealed by piezoresponse force microscopy (PFM) and further verified by polarization-electric field (P-E) loop measurements with Positive-Up-Negative-Down (PUND). The P-E loops exhibited a remnant polarization of ∼5 μC cm –2 and a coercive field of ∼63 kV cm –1 . Furthermore, these results were interpreted in relation to c- and a-domain configurations.

Raman spectroscopy↗
NASA NTRS1983

Conductive flux in the chromosphere derived from line linear polarization observation

It is shown that quantitative information on the mechanisms of energy transport which take place in solar flares can be obtained by measurement of impact line polarization. Linear polarization in two chromospheric lines (H-alpha and SI 1437 A) observed in the gradual phase of solar flares was investigated. The polarized electric vector is shown to be directed towards the center of the disk. The relationship between conductive heat flux and linear line polarization is determined using a function which represents the velocity distribution of electrons carrying heat flux. The relationship between linear polarization and heat flux is applied to the observed degree of polarization, which yields the conductive heat flux in the high chromosphere. It is determined that this conductive flux is of the order of magnitude of the total radiation loss in the chromosphere and below, which is also of the order of magnitude of the conductive flux in the transition zone.

Henoux, J.-C.↗
NASA NTRS2005

Electric field measurements of DC and long wavelength structures associated with sporadic-E layers and QP radar echoes

Electric field and plasma density data gathered on a sounding rocket launched from Uchinoura Space Center, Japan, reveal a complex electrodynamics associated with sporadic-E layers and simultaneous observations of quasiperiodic radar echoes. The electrodynamics are characterized by spatial and temporal variations that differed considerably between the rocket's up-leg and down-leg traversals of the lower ionosphere. Within the main sporadic-E layer (95- 110 km) on the up-leg, the electric fields were variable, with amplitudes of 2 4 mV1m that changed considerably within altitude intervals of 1-3 km. The identification of polarization electric fields coinciding with plasma density enhancements and/or depletions is not readily apparent. Within this region on the down-leg, however, the direction of the electric field revealed a marked change that coincided precisely with the peak of a single, narrow sporadic-E plasma density layer near 102.5 km. This shear was presumably associated with the neutral wind shear responsible for the layer formation. The electric field data above the sporadic-E layer on the upleg, from 110 km to the rocket apogee of 152 km, revealed a continuous train of distinct, large scale, quasi-periodic structures with wavelengths of 10-15 km and wavevectors oriented between the NE-SW quadrants. The electric field structures had typical amplitudes of 3-5 mV/m with one excursion to 9mV/m, and in a very general sense, were associated with perturbations in the plasma density. The electric field waveforms showed evidence for steepening and/or convergence effects and presumably had mapped upwards along the magnetic field from the sporadic-E region below.

Pfaff, R.↗
DOE OSTI2026

Heteroepitaxial control of thickness, strain, and domain architecture in few-layer ferroelectric tin monochalcogenides

Thin-film epitaxy and epitaxial strain have been widely exploited to tune domain configurations, switching behavior, and ferroic properties in conventional three-dimensional ferroelectric thin films; however, its application to controlling the properties of two-dimensional (2D) ferroelectrics has remained largely unexplored. Here, using SnX (X = Se, S) as a model system, we demonstrate heteroepitaxial control of thickness, strain state, and domain architecture in few-layer ferroelectric SnX via growth on monolayer MoS2 van der Waals (vdW) templates. Compared with conventional growth, MoS2-templated heteroepitaxy promotes epitaxial alignment, yielding ultrathin SnSe films with improved crystalline quality, full areal coverage, and enlarged lateral dimensions. Strong interfacial epitaxial coupling induces pronounced in-plane strain and stabilizes a hierarchical ferroelastic domain architecture, in which long-range 90° stripe domains are further subdivided into nanoscale rotational variants, as revealed by scanning transmission electron microscopy and synchrotron X-ray microscopy. Piezoresponse force microscopy and second-harmonic polarimetry confirm robust in-plane polarization, while ferroelectricity in SnSe is established through polarization-electric field hysteresis and nonvolatile ferroelectric resistive switching with on/off ratios approaching 1000. A nonvolatile, switchable ferroelectric diode effect further evidences direct coupling between polarization and charge transport. Notably, ferroelectric switchability exhibits a strong thickness dependence and is preserved only below ∼10 layers. This vdW heteroepitaxial strategy is further extended to ferroelectric SnS. The seamless heteroepitaxial integration of 2D ferroelectrics with CMOS-compatible, wafer-scale MoS2 templates provides a general and scalable route for strain-enabled structural and ferroelectric engineering in emerging memory and low-power optoelectronic applications.

Wang, Yueyin↗
DOE OSTI2021

Tuning Dzyaloshinskii-Moriya interactions in magnetic bilayers with a ferroelectric substrate

Our group performed systematic first-principles calculations to explore the possibility of manipulating Dzyaloshinskii-Moriya interactions (DMIs) in heavy metal/ferromagnetic metal bilayers with ferroelectric (FE) polarization of a PbTiO 3 (PTO) substrate. Significantly, both the sign and magnitude of the DMI can be tailored by the FE polarization reversal in PTO. Moreover, the DMIs of Ir/Co/PTO and Ir/Fe/PTO can achieve large values (|d| > 10 meV) under the influence of an upward electric polarization of PTO. Our findings provided useful strategies for enhancing and tailoring DMIs in complex heterostructures and paved the way for the development of DMI-based devices with ultralow power consumption.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Second-harmonic and linear spectroscopy of $\textit{α}$-In 2 Se 3

We report spectroscopic measurements of optical transmission, ellipsometry, and second-harmonic generation (SHG) from as-grown vapor-deposited $\textit{α}$-In 2 Se 3 nanoflakes ranging in thickness from a single quintuple layer (QL) to bulk material. In this work, we compare these measurements with ab initio calculations of structural and optical properties. Linear optical measurements yield thickness-dependent band gaps and dielectric functions, while SHG diagnoses microscopic film structure and ferroelectric polarization. The rotational anisotropy of SHG for s-polarized incident photons of energy 1.4 eV reveals crystalline symmetry and orientation of individual QLs. Peak SHG intensity increases from one to three QLs, then decreases for larger numbers, tracking thickness-dependent trends in the second-order susceptibility components $χ^{xxx}$ and $χ^{zxx}$. Comparison of measured and calculated SHG spectra for s-polarized photons of energies between 1.2 and 1.7 eV incident upon two QL samples discriminates among candidate stacking arrangements, and favors an arrangement with electric polarization vectors of the two QLs pointing outward in opposite directions.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Quantitative phenotyping of crop roots with spectral electrical impedance tomography: a rhizotron study with optimized measurement design

Background: Root systems are key contributors to plant health, resilience, and, ultimately, yield of agricultural crops. To optimize plant performance, phenotyping trials are conducted to breed plants with diverse root traits. However, traditional analysis methods are often labour-intensive and invasive to the root system, therefore limiting high-throughput phenotyping. Spectral electrical impedance tomography (sEIT) could help as a non-invasive and cost-efficient alternative to optical root analysis, potentially providing 2D or 3D spatio-temporal information on root development and activity. Although impedance measurements have been shown to be sensitive to root biomass, nutrient status, and diurnal activity, only few attempts have been made to employ tomographic algorithms to recover spatially resolved information on root systems. In this study, we aim to establish relationships between tomographic electrical polarization signatures and root traits of different fine root systems (maize, pinto bean, black bean, and soy bean) under hydroponic conditions. Results: Our results show that, with the use of an optimized data acquisition scheme, sEIT is capable of providing spatially resolved information on root biomass and root surface area for all investigated root systems. We found strong correlations between the total polarization strength and the root biomass (R 2 = 0.82) and root surface area (R 2 = 0.8). Our findings suggest that the captured polarization signature is dominated by cell-scale polarization processes. Additionally, we demonstrate that the resolution characteristics of the measurement scheme can have a significant impact on the tomographic reconstruction of root traits. Conclusion: Our findings showcase that sEIT is a promising tool for the tomographic reconstruction of root traits in high-throughput root phenotyping trials and should be evaluated as a substitute for traditional, often time-consuming, root characterization methods.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Visualizing moiré ferroelectricity via plasmons and nano-photocurrent in graphene/twisted-WSe2 structures

Abstract Ferroelectricity, a spontaneous and reversible electric polarization, is found in certain classes of van der Waals (vdW) materials. The discovery of ferroelectricity in twisted vdW layers provides new opportunities to engineer spatially dependent electric and optical properties associated with the configuration of moiré superlattice domains and the network of domain walls. Here, we employ near-field infrared nano-imaging and nano-photocurrent measurements to study ferroelectricity in minimally twisted WSe 2 . The ferroelectric domains are visualized through the imaging of the plasmonic response in a graphene monolayer adjacent to the moiré WSe 2 bilayers. Specifically, we find that the ferroelectric polarization in moiré domains is imprinted on the plasmonic response of the graphene. Complementary nano-photocurrent measurements demonstrate that the optoelectronic properties of graphene are also modulated by the proximal ferroelectric domains. Our approach represents an alternative strategy for studying moiré ferroelectricity at native length scales and opens promising prospects for (opto)electronic devices.

42 ENGINEERING↗
NASA NTRS1972

Convection electric fields and polar thermospheric winds.

Use of the qualitative ideas of convection electric fields over the earth's polar regions to demonstrate the importance of ion drag in establishing a thermospheric wind system. Recent measurements indicate that uniform electric fields of 10 to 40 mV/m are a regular feature of the polar-cap ionosphere. Calculations of the neutral thermospheric wind, using these measured fields in a simple ionospheric model, have been made. The time scale for motion of the neutral gas ranges from less than 1 hour at F-region heights to about 2 hours in the dynamo region of the ionosphere. It has been found that the viscosity of the atmosphere is important in determining the winds in the dynamo region. Results are given that show ion-temperature enhancements of hundreds of degrees that are due to ion-neutral frictional effects. In addition, the total deposition rate of convection energy in the polar thermosphere is shown to be of the same order of magnitude as that due to absorption of solar EUV radiation. The implications of these results for the dynamics and energetics of the thermosphere are discussed.

Fedder, J. A.↗
NASA NTRS1993

Direct time integration of Maxwell's equations in two-dimensional dielectric waveguides for propagation and scattering of femtosecond electromagnetic solitons

We present what are to our knowledge first-time calculations from vector nonlinear Maxwell's equations of femtosecond soliton propagation and scattering, including carrier waves, in two-dimensional dielectric waveguides. The time integration efficiently implements linear and nonlinear convolutions for the electric polarization, and the nonlinear convolution accounts for two quantum effects, the Kerr and Raman interactions. By retaining the optical carrier, the new method solves for fundamental quantities - optical electric and magnetic fields in space and time - rather than a nonphysical envelope function. It has the potential to provide an unprecedented two- and three-dimensional modeling capability for millimeter-scale integrated-optical circuits with submicrometer engineered inhomogeneities.

Joseph, Rose M.↗
NASA NTRS2000

Transient Flows in the Magnetospheric Cusp: Ground Satellite Correlations

We first identified conjunctions of the POLAR magnetic footprint and the MACCS ground-based magnetometer array during intervals when the POLAR orbit was near the noon meridian and then searched the ground based data for transient events (i.e. large rapid changes in the magnetic field). This resulted in the identification of several tens of possible events, but we decided to limit ourselves to the study of three particularly good examples. The examples we chose were all cases where the ionospheric convection, as deduced from the MACCS observations, changed significantly in a few minutes. We then looked for signatures of these flow changes and for other corresponding changes in the POLAR data. We found that: a) the fast irregular flows seen in the POLAR electric field and plasma data completely mask the slower more steady flows seen in the ionosphere. The mapped ionospheric flows are an order of magnitude slower than the irregular flows at POLAR. b) the changes in magnetic field direction at POLAR did correlate very well with the required field stresses needed to move the flux tubes through the resistive ionosphere, so the effects of the ionospheric flow changes are seen at POLAR. c) the plasma fluxes seen at POLAR varied with the north-south component of the IMF on a minute time scale, and also correlated very well with the ionospheric flow changes.

Hughes, W. Jeffrey↗
DOE OSTI2021

Multimode two-dimensional vibronic spectroscopy. I. Orientational response and polarization-selectivity

Two-dimensional Electronic–Vibrational (2D EV) spectroscopy and two-dimensional Vibrational–Electronic (2D VE) spectroscopy are among the newest additions to the coherent multidimensional spectroscopy toolbox, and they are directly sensitive to vibronic couplings. In this first of two papers, the complete orientational response functions are developed for a model system consisting of two coupled anharmonic oscillators and two electronic states in order to simulate polarization-selective 2D EV and 2D VE spectra with arbitrary combinations of linearly polarized electric fields. Here, we propose analytical methods to isolate desired signals within complicated spectra and to extract the relative orientation between vibrational and vibronic dipole moments of the model system using combinations of polarization-selective 2D EV and 2D VE spectral features. Time-dependent peak amplitudes of coherence peaks are also discussed as means for isolating desired signals within the time-domain. This paper serves as a field guide for using polarization-selective 2D EV and 2D VE spectroscopies to map coupled vibronic coordinates on the molecular frame.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Stacking-engineered ferroelectricity in bilayer boron nitride

Stacking a ferroelectric Properties of layered van der Waals structures can depend sensitively on the stacking arrangement of constituent layers. This phenomenon has been exploited to engineer superconducting, correlated insulator, and magnetic states. Two groups now show that ferroelectricity can also be engineered through stacking: Parallel-stacked bilayers of hexagonal boron nitride exhibit ferroelectric switching even though the bulk material is not ferroelectric (see the Perspective by Tsymbal). To explore these phenomena, Yasuda et al. used transport measurements, whereas Vizner Stern et al. focused on atomic force microscopy. Science , abd3230 and abe8177, this issue p. 1458 and p. 1462 ; see also abi7296, p. 1389

Science & Technology - Other Topics↗
DOE OSTI2021

Phase transitions and potential ferroelectricity in noncentrosymmetric KNaNbOF 5

Increasing the number of known ferroelectrics requires expanding the chemical design space and mechanisms producing ferroelectricity. To that end, we examine the displacive, noncentrosymmetric-to-centrosymmetric phase transition in the oxyfluoride KNaNbOF 5 using ab initio calculations and Landau theory. Here we predict an intermediate Pnma phase occurs in the transition from the known low- and high-temperature phases, Pna2 1 and Cmcm, respectively, which we subsequently confirm using high-resolution and in situ 19 F magic-angle spinning nuclear magnetic resonance. Using the intermediate structure, we then calculate the monodomain polarization switching barrier in KNaNbOF 5 to be ~ 93 meV per formula unit, comparable to existing ferroelectrics. The reversal of the polarization is due to uncompensated antipolar displacements of oxygen and fluorine and does not require oxygen and fluorine site exchange as in other nonswitchable heteroanionic materials, which makes KNaNbOF 5 a viable oxyfluoride for a switchable electric polarization.

36 MATERIALS SCIENCE↗