Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Effectiveness evaluation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Evaluating the Effects of Transient Purge Flow on Stator-Rotor Seal Performance

Abstract As modern engine designs target higher efficiencies through increased turbine inlet temperatures, critical turbine components are at increased risk of damage from conditions exceeding material melting temperatures. In particular, improperly designed underplatform hardware components are susceptible to damage when hot main gas path flow is ingested into the stator-rotor cavity. While all turbines inherently experience transients during operation, a majority of publicly available turbine studies have been executed using steady operating conditions or inherently transient “blowdown” rigs. For this reason, routine transient events are not well understood. To address this need, the present study utilized a combined experimental and computational approach. The test article is a continuous-duration, one-stage test turbine operating with true-scale engine hardware and seal geometries at engine-representative flow conditions. The nature of the continuous-duration facility uniquely supports the direct assessment of transient events through its ability to transition between steady-state operating conditions. The effects of a transient purge flow were investigated in this study to identify general trends for transient events in a full-scale engine. Results from multiple measurement techniques in the wheelspace region show an interdependence of transient purge flow with a thermal lag of the underplatform hardware. Through experiments conducted at different coolant-to-main gas path temperature ratios, the use of pressure measurements as an indicator of fully purged behavior was introduced, and a thermally driven influence on rim seal performance was quantified. The computational results show good agreement with experimental pressure measurements and provide insight into the physical mechanisms that drive the relationship between pressure and sealing effectiveness measurements observed for the tested geometry.

Engineering↗
DOE OSTI2022

Evaluating the Effects of Nitrogen Doping and Oxygen Doping on SRF Cavity Performance

Superconducting radiofrequency (SRF) cavities are resonators with extremely low surface resistance that enable accelerating cavities to have extremely high quality factors (Q₀). High Q₀ decreases the capital required to keep the accelerators cold by reducing power loss. The performance of SRF cavities is largely governed by the surface composition of the first §I{100}{nm} of the cavity surface. Impurities such as oxygen and nitrogen have been observed to yield high Q₀, but their precise roles are still being studied. Here, we compare the performance of cavities doped with nitrogen and oxygen in terms of surface composition and heating behavior with field. A simulation of the diffusion of oxygen into the bulk of the cavity was built using COMSOL Multiphysics software. Simulated results were compared to the actual surface composition of the cavities as determined from secondary ion mass spectrometry analysis. Understanding how these impurities affects performance allows us to have further insight into the underlying mechanisms that enable these surface treatments to yield high Q₀.

43 PARTICLE ACCELERATORS↗
DOE OSTI2025

Approach to evaluate the effect of selected additives on the environmental impacts of plastic product manufacturing and recycling

Plastic waste management has become a topic of increasing public interest due to the growing amount of plastic waste entering landfills, being combusted, or being leaked into the environment due to mismanagement. The portion of plastic products that is currently recycled remains low (< 9 % in the U.S.). This is driven by numerous factors including infrastructure and collection needs to improve the recycling rate of plastic waste, technological constraints in recycling the wide variety of plastic products associated with the diverse range of (non-transparent) formulations, and economic limitations for recycling plastic and using recycled plastic in new plastic products (e.g., consumer incentives to recycle, economic value of recycled plastic). The relative importance of these factors is not well understood, and each requires additional research.

36 MATERIALS SCIENCE↗
NASA NTRS1975

Method for evaluating gravity effects in the testing of nutation dampers

A method is developed for determining the effect of gravity in the testing of nutation dampers on symmetric single or dual spin satellites. The basic theory is developed and then applied to the partially filled viscous ring damper and the spring-mass-dashpot damper. A comparison with test results for the viscous ring damper is also given.-

Alfriend, K. T.↗
NASA NTRS1975

Study to evaluate the effect of EVA on payload systems. Volume 1: Executive summary

Programmatic benefits to payloads are examined which can result from the routine use of extravehicular activity (EVA) during space missions. Design and operations costs were compared for 13 representative baseline payloads to the costs of those payloads adapted for EVA operations. The EVA-oriented concepts developed in the study were derived from these baseline concepts and maintained mission and program objectives as well as basic configurations. This permitted isolation of cost saving factors associated specifically with incorporation of EVA in a variety of payload designs and operations. The study results were extrapolated to a total of 74 payload programs. Using appropriate complexity and learning factors, net EVA savings were extrapolated to over $551M for NASA and U.S. civil payloads for routine operations. Adding DOD and ESRO payloads increases the net estimated savings of $776M. Planned maintenance by EVA indicated an estimated $168M savings due to elimination of automated service equipment. Contingency problems of payloads were also analyzed to establish expected failure rates for shuttle payloads. The failure information resulted in an estimated potential for EVA savings of $1.9 B.

Patrick, J. W.↗
NASA NTRS1984

Evaluation of effective eddy diffusive coefficients using radar observations of turbulence in the stratosphere

Radar observations show that thin, persistent layers of turbulence occur sporadically in the troposphere and stratosphere. Two probabilistic approaches are used to show that the vertical eddy diffusivity due to such layers is of the order of 0.2-0.3 sq m/sec in the lower stratosphere. An actual realization of turbulent layers, derived from the radar observations at Arecibo, is used in a numerical approach to obtain a profile of eddy diffusivity. It is suggested that turbulence plays a significant role in the vertical transport of trace constituents in the stratosphere.

Woodman, R. F.↗
NASA NTRS1987

A component decomposition model for evaluating atmospheric effects in remote sensing

A radiance value of a target pixel recorded by a remote sensor can be decomposed into three components: (1) attenuated target signature, (2) pure atmospheric radiation, and (3) the contribution made by the ground through the atmospheric scattering process. Given the meteorological and optical parameters of a layer-structured atmosphere, its transmittance and radiance distribution can be accurately calculated with a plane-parallel radiative transfer model. For a uniform surface, the ground contribution can be obtained by comparing radiances for an atmosphere over a black but nonemitting surface and the same atmosphere with an underlying ground of given albedo or temperature. For an inhomogeneous surface, the first two components remain the same as long as the surface is a plane. The third may be estimated using the locally averaged top-of-atmosphere radiance. An atmospheric point spread function is calculated by a Monte Carlo approach and is used for retrieving the ground signature through a deconvolution procedure.

Li, S.↗
NASA NTRS1989

Laboratory test methodology for evaluating the effects of electromagnetic disturbances on fault-tolerant control systems

Control systems for advanced aircraft, especially those with relaxed static stability, will be critical to flight and will, therefore, have very high reliability specifications which must be met for adverse as well as nominal operating conditions. Adverse conditions can result from electromagnetic disturbances caused by lightning, high energy radio frequency transmitters, and nuclear electromagnetic pulses. Tools and techniques must be developed to verify the integrity of the control system in adverse operating conditions. The most difficult and illusive perturbations to computer based control systems caused by an electromagnetic environment (EME) are functional error modes that involve no component damage. These error modes are collectively known as upset, can occur simultaneously in all of the channels of a redundant control system, and are software dependent. A methodology is presented for performing upset tests on a multichannel control system and considerations are discussed for the design of upset tests to be conducted in the lab on fault tolerant control systems operating in a closed loop with a simulated plant.

Belcastro, Celeste M.↗