Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Earth system modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Mechanisms in Regulating the Quasi‐Biennial Oscillation in Exascale Earth System Model Version 2

Abstract The update to the deep convection parameterization in the energy exascale Earth system model version 2 (E3SMv2) makes the simulated quasi‐biennial oscillation (QBO) have a shorter period than without the update when other tunable parameters the same since the update makes convection more intense but less frequent while leaving the time‐mean convective heating tendency almost unchanged. Amplitudes of momentum fluxes of parameterized gravity waves (GWs) are intensified since they are determined by the square of convective heating tendency. In addition, stronger planetary waves are simulated in E3SMv2 with the convection scheme update, partially due to the tropospheric precipitation change. Furthermore, there is evidence that planetary waves are intensified in the stratosphere due to the dissipation of enhanced parameterized GWs. These factors are found to be responsible for modulating the QBO simulated in E3SMv2.

Li, Yuanpu [Climate and Global Dynamics Division U↗
DOE OSTI2025

Bias correcting regional scale Earth system model projections: novel approach using empirical mode decomposition

Bias correction is a crucial step in using Earth system model outputs for assessments, as it adjusts systematic errors by comparing the model to observations. However, standard methods – ranging from mean-based linear scaling to distribution-based quantile mapping typically treat bias correction as a single-scale process, overlooking the fact that biases can manifest differently across daily, seasonal, and annual timescales. In this study, we propose a novel, timescale-aware bias-correction approach built on Empirical Mode Decomposition. By decomposing the meteorological signal into multiple oscillatory components and aggregating them to represent distinct timescales, we apply targeted corrections to each component, thereby preserving both short- and long-term structure in the data. Experimental illustrations show that the timescale-aware EMDBC framework matches the performance of conventional quantile-delta mapping (QDM) at the native daily scale and achieves progressively larger bias reductions at bi-weekly, seasonal, and annual scales. As a result, the proposed approach offers a more robust path to accurate and reliable Earth system projections, strengthening their utility for resilience and adaptation planning.

Ganguli, Arkaprabha [Argonne National Laboratory (↗
DOE OSTI2026

Diagnosing the representation of surface and layered soil moisture in Earth system models

Surface soil moisture (mrsos) and vertically integrated soil moisture (mrsol) over the top 10 cm should, by definition, be physically consistent in Earth System Models (ESMs). However, an evaluation of nine CMIP6 models reveals substantial inconsistencies: in some models, mrsos and integrated mrsol agree globally; in others, they align only in specific regions; and in a few, they diverge across all grid cells. These discrepancies arise from a combination of factors, including metadata errors, inconsistent variable definitions, or diagnostic sequencing within the model. We demonstrate how such issues can lead to significant biases, even when both variables are present and seemingly well-defined. As model complexity increases and multi-model comparisons become more common, assumptions about variable equivalence may lead to flawed conclusions. This study highlights the need for routine consistency checks, improved metadata standards, and community-wide practices that ensure reliability of derived variables across ESM outputs, particularly in preparation for CMIP7.

Earth system models↗
DOE OSTI2024

STITCHES: a Python package to amalgamate existing Earth system model output into new scenario realizations

Understanding the interaction between humans and the Earth system is a computationally daunting task, with many possible approaches depending on resources available and questions of interest. For example, state-of-the-art impact models require decade-long time series of relatively high frequency, spatially resolved and often multiple variables representing climatic impact-drivers (Ruane et al., 2022). Most commonly these are derived from the outputs of detailed, computationally expensive Earth System Models (ESMs) run according to a standard, limited set of future scenarios, the latest being the SSP-RCPs run under CMIP6/ScenarioMIP (Eyring et al., 2016; O’Neill et al., 2016). At the time of writing, O’Neill et al. (2016) has been cited more than 1750 times and Eyring et al. (2016) more than 5000 times, highlighting the broad, general applications of this data. Often, however, impact modeling seeks to explore new scenarios that were not part of the ScenarioMIP protocol, and/or needs a larger set of initial condition ensemble members than are typically available to quantify the effects of ESM internal variability. In addition, the recognition that the human and Earth systems are fundamentally intertwined, and may feature potentially significant feedback loops, is making integrated, simultaneous modeling of the coupled human-Earth system increasingly necessary, if computationally challenging with most existing tools (Thornton et al., 2017). For impact modelers, climate model emulators can be the answer to meet both the needs of: 1) creating realizations for novel scenarios and 2) achieving a simplified, computationally tractable representation of ESM behavior in a coupled human-Earth system modeling framework. We proposed a new, comprehensive approach to such emulation of gridded, multivariate ESM outputs for novel scenarios without the computational cost of a full ESM, STITCHES (Tebaldi et al., 2022). The approach outlined in Tebaldi et al. (2022) should be extensible to future CMIP eras, although the STITCHES software at present is strictly focused on CMIP6/ScenarioMIP data hosted on Pangeo (https://gallery.pangeo.io/repos/pangeo-gallery/cmip6/). The corresponding STITCHES Python package uses existing archives of ESMs’ scenario experiments from CMIP6/ScenarioMIP to construct gridded, multivariate realizations of new scenarios provided by reduced complexity climate models (Hartin et al., 2015; Meinshausen et al., 2011; Smith et al., 2018), or to enrich existing initial condition ensembles. Its output provides the same characteristics as the emulated ESM output: multivariate (spanning potentially all variables that the ESM has saved), spatially resolved (down to the native grid of the ESM), and preserving the same high frequency as the original data. A new realization of multiple variables can be generated on the order of minutes with STITCHES, rather than the hours or sometimes days that ESMs require.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

Evaluating the Water Cycle Over CONUS at the Watershed Scale for the Energy Exascale Earth System Model Version 1 (E3SMv1) Across Resolutions

Abstract The water cycle is an important component of the earth system and it plays a key role in many facets of society, including energy production, agriculture, and human health and safety. In this study, the Energy Exascale Earth System Model version 1 (E3SMv1) is run with low‐resolution (roughly 110 km) and high‐resolution (roughly 25 km) configurations—as established by the High Resolution Model Intercomparison Project protocol—to evaluate the atmospheric and terrestrial water budgets over the conterminous United States (CONUS) at the large watershed scale. The warm season water cycle slows down in the HR experiment relative to the LR, with decreasing fluxes of precipitation, evapotranspiration, atmospheric moisture convergence, and runoff. The reductions in these terms exacerbate biases for some watersheds, while reducing them in others. For example, precipitation biases are exacerbated at HR over the Eastern and Central CONUS watersheds, while precipitation biases are reduced at HR over the Western CONUS watersheds. The most pronounced changes with resolution to the water cycle come from reductions in precipitation and evapotranspiration. The reduction in evapotranspiration reduces the biases across nearly all of the CONUS. Additional exploratory metrics show improvements to water cycle extremes (both in precipitation and streamflow), fractional contributions of different storm types to total precipitation, and mountain snowpack.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Numerical Water Tracers in the Atmospheric Component of the Energy Exascale Earth System Model: Implementation and Changes in Moisture Origin

Numerical water tracers are implemented in the Energy Exascale Earth System Model version 2. Simulations performed with the water‐tag‐enabled model for both pre‐industrial and future greenhouse gas concentrations reveal a marked increase in the role of mid‐latitude and southern subtropical regions as exporters of atmospheric moisture—to the extratropical upper troposphere and the tropical free troposphere. For the latter, the northward shift of the Intertropical Convergence Zone increases cross‐hemispheric transport of subtropical water vapor to the Northern Hemisphere. In the polar regions, most of the lower tropospheric moistening instead arises from increases in local evaporation. These findings illustrate the utility of the water tags, underscore critical changes in global hydrologic cycle, and provide insight into atmospheric dynamics under future climate scenarios. For applications when a global grid is desired, we additionally propose a novel statistical reconstruction, based on copula modeling, of the joint distribution of origin of water vapor, which reduces the number of tracers from order $\mathcal{O}\left({n}^{2}\right)$to order $\mathcal{O}(n)$, substantially ameliorating the considerable computational cost of water tracers. This statistical reconstruction is particularly beneficial to the interpretation of the relationship between latitude and longitude of origin of moisture over the tropical oceans and in the lower troposphere over land.

copula modeling↗
DOE OSTI2025

The Energy Exascale Earth System Model Version 3: 1. Overview of the Atmospheric Component

This paper describes the atmospheric component of the US Department of Energy's Energy Exascale Earth System Model (E3SM) version 3. Significant updates have been made to the atmospheric physics compared to earlier versions. Specifically, interactive gas chemistry has been implemented, along with improved representations of aerosols and dust emissions. A new stratiform cloud microphysics scheme more physically treats ice processes and aerosol‐cloud interactions. The deep convection parameterization has been largely improved with sophisticated microphysics for convective clouds, making model convection sensitive to large‐scale dynamics, and incorporating the dynamical and physical effects of organized mesoscale convection. Improvements in aerosol wet removal processes and parameter re‐tuning of key aerosol and cloud processes have improved model aerosol radiative forcing. The model's vertical resolution has increased from 72 to 80 layers with the extra eight layers added in the lower stratosphere to better simulate the Quasi‐Biennial Oscillation. These improvements have enhanced E3SM's capability to couple aerosol, chemistry, and biogeochemistry and reduced some long‐standing biases in simulating tropical variability. Compared to its predecessors, the model shows a much stronger signal for the Madden‐Julian Oscillation, Kelvin waves, mixed Rossby‐gravity waves, and eastward inertia‐gravity waves. Aerosol radiative forcing has been considerably reduced and is now better aligned with community best estimates, leading to significantly improved skill in simulating historical temperature records. Its simulated mean‐state climate is largely comparable to E3SMv2, but with some notable degradation in shortwave cloud radiative effect, precipitable water, and surface wind stress, which will be addressed in future updates.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

A Multi-Scale Inference, Estimation, and Prediction Engine for Earth System Modeling

We posit that AI methods can be leveraged to significantly enhance the predictive skill of forward Earth system modeling (ESM) activities. A hybrid framework incorporating traditional ESM modeling, inference methods, and AI techniques could make better use of both measured and computed information as well as computational resources by targeting inference tasks at program priorities, such as the predictability of precipitation extremes. This runtime pathway to closing the simulation/analysis-data/model improvement loop will streamline the traditional offline pathway to model improvement, which is based on domain science expertise, while suggesting guidance for further observations and measurements.

58 GEOSCIENCES↗
DOE OSTI2020

Plant Physiology Increases the Magnitude and Spread of the Transient Climate Response to CO 2 in CMIP6 Earth System Models

Increasing concentrations of CO 2 in the atmosphere influence climate both through CO 2 ’s role as a greenhouse gas and through its impact on plants. Plants respond to atmospheric CO 2 concentrations in several ways that can alter surface energy and water fluxes and thus surface climate, including changes in stomatal conductance, water use, and canopy leaf area. These plant physiological responses are already embedded in most Earth system models, and a robust literature demonstrates that they can affect global-scale temperature. However, the physiological contribution to transient warming has yet to be assessed systematically in Earth system models. Here this gap is addressed using carbon cycle simulations from phases 5 and 6 of the Coupled Model Intercomparison Project (CMIP) to isolate the radiative and physiological contributions to the transient climate response (TCR), which is defined as the change in globally averaged near-surface air temperature during the 20-yr window centered on the time of CO 2 doubling relative to preindustrial CO 2 concentrations. In CMIP6 models, the physiological effect contributes 0.12°C ( σ : 0.09°C; range: 0.02°–0.29°C) of warming to the TCR, corresponding to 6.1% of the full TCR ( σ : 3.8%; range: 1.4%–13.9%). Moreover, variation in the physiological contribution to the TCR across models contributes disproportionately more to the intermodel spread of TCR estimates than it does to the mean. The largest contribution of plant physiology to CO 2 -forced warming—and the intermodel spread in warming—occurs over land, especially in forested regions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Pangeo-Enabled ESM Pattern Scaling (PEEPS): A customizable dataset of emulated Earth System Model output

Emulation through pattern scaling is a well-established method of rapidly producing climate fields (like temperature or precipitation) from existing Earth System Model (ESM) output that, while inaccurate, is often useful for a variety of downstream purposes. Conducting pattern scaling has historically been a laborious process, in large part due to the increasing volume of ESM output data that has often required downloading and storing locally to train on. Here we describe the Pangeo-Enabled ESM Pattern Scaling (PEEPS) dataset, a repository of trained annual and monthly patterns from CMIP6 outputs. This manuscript describes and validates these updated patterns so that users can save effort calculating and reporting error statistics in manuscripts focused on the use of patterns. The trained patterns are available as NetCDF files on Zenodo for ease of use in the impact community, and are reproducible with the code provided via GitHub in both Jupyter notebook and Python script formats. Because all training data for the PEEPS data set is cloud-based, users do not need to download and house the ESM output data to reproduce the patterns in the zenodo archive, should that be more efficient. Validating the PEEPS data set on the CMIP6 archive for annual and monthly temperature, precipitation, and near-surface relative humidity, pattern scaling performs well over a variety of future scenarios except for regions in which there are strong, potentially nonlinear climate feedbacks. Although pattern scaling is normally conducted on annual mean ESM output data, it works equally well on monthly mean ESM output data. We identify several downstream applications of the PEEPS data set, including impacts assessment and evaluating certain types of Earth system uncertainties.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Downscaled Earth System Model Data for Resilient Energy System Planning

The second-generation Sup3rCC dataset provides high-resolution meteorological data generated through the downscaling of multiple earth system models (ESMs) from the Coupled Model Intercomparison Project Phase 6 (CMIP6). This downscaling is performed through application of a generative machine learning approach called Super-Resolution for Renewable Resource Data (sup3r). This dataset builds on the first-generation Sup3rCC data by applying improved bias correction methods and adding downscaled precipitation to the output variables. In this presentation, we explore the output characteristics of the dataset and various validation analyses. We also present and discuss plans for the integration of this data into power system planning models using a decision-making under deep uncertainty (DMDU) methodology.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

The influence of fire aerosols on surface climate and gross primary production in the Energy Exascale Earth System Model (E3SM)

Fire-emitted aerosols play an important role in influencing Earth’s climate, directly by scattering and absorbing radiation and indirectly by influencing cloud microphysics. The quantification of fire-aerosol interactions, however, remains challenging and subject to uncertainties in emissions, plume parameterizations, and aerosol properties. Here we optimized fire-associated aerosol emissions in the Energy Exascale Earth System Model (E3SM) using the Global Fire Emissions Database (GFED) and AERONET aerosol optical depth (AOD) observations during 1997-2016. Furthermore, we distributed fire emissions vertically using smoke plume heights from Multi-angle Imaging SpectroRadiometer (MISR) satellite observations. From the optimization, we estimate that global fires emit 45.5 Tg y -1 of primary particulate organic matter and 3.9 Tg y -1 of black carbon. We then performed two climate simulations with and without the optimized fire emissions. We find that fire aerosols significantly increase global AOD by 14 ± 7% and contribute to a reduction in net shortwave radiation at the surface (-2.3 ± 0.5 W m -2 ). Together, fire-induced direct and indirect aerosol effects cause annual mean global land surface air temperature to decrease by 0.17 ± 0.15°C, relative humidity to increase by 0.4 ± 0.3%, and diffuse light fraction to increase by 0.5 ± 0.3%. In response, GPP declines by 2.8 Pg C y -1 , as a result of large positive drivers (decreases in temperature and increases in humidity and diffuse light) nearly cancelling out large negative drivers (decreases shortwave radiation and soil moisture). Our analysis highlights the importance of fire aerosols in modifying surface climate and photosynthesis across the tropics.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Reconciling and Improving Formulations for Thermodynamics and Conservation Principles in Earth System Models (ESMs)

Abstract This paper provides a comprehensive derivation of the total energy equations for the atmospheric components of Earth System Models (ESMs). The assumptions and approximations made in this derivation are motivated and discussed. In particular, it is emphasized that closing the energy budget is conceptually challenging and hard to achieve in practice without resorting to ad hoc fixers. As a concrete example, the energy budget terms are diagnosed in a realistic climate simulation using a global atmosphere model. The largest total energy errors in this example are spurious dynamical core energy dissipation, thermodynamic inconsistencies (e.g., coupling parameterizations with the host model) and missing processes/terms associated with falling precipitation and evaporation (e.g., enthalpy flux between components). The latter two errors are not, in general, reduced by increasing horizontal resolution. They are due to incomplete thermodynamic and dynamic formulations. Future research directions are proposed to reconcile and improve thermodynamics formulations and conservation principles.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Overestimated natural biological nitrogen fixation translates to an exaggerated CO 2 fertilization effect in Earth system models

CO 2 fertilization of the terrestrial biosphere is limited by nitrogen. Biological nitrogen fixation (BNF) is the dominant natural nitrogen source to the terrestrial biosphere and can alleviate nitrogen limitation but is poorly constrained in Earth system models (ESMs). Here, in this study, we compare terrestrial BNF from an ensemble of ESMs of the 6th Coupled Model Intercomparison Project to a new global synthesis of observations across natural and agricultural biomes. We find that compared to observations, ESMs underestimate agricultural BNF but overestimate natural BNF in the present day by over 50%. Natural BNF is overestimated in the most productive ecosystems that contribute most to the terrestrial carbon sink (forests and grasslands). ESMs with different BNF representations yield a range of BNF responses to CO 2 enrichment. Some ESMs with phenomenological representations of BNF predict a natural BNF increase in response to a doubling of CO 2 that aligns with a meta-analysis of CO 2 enrichment experiments (31% increase) but fail to account for the substantial carbon cost of BNF. In contrast, ESMs with mechanistic representations of BNF account for its carbon cost as well as its regulation by nitrogen limitation but overestimate the BNF response to a doubling of CO 2 (135% increase). Overall, all current BNF representations in ESMs fall short of fully capturing its response to rising atmospheric CO 2 . Finally, we find a positive correlation between modeled present-day natural BNF and the CO 2 fertilization effect across ESMs, suggesting that overestimated natural BNF translates to an exaggerated CO 2 fertilization effect of approximately 11% in ESMs.

Biological nitrogen fixation↗
DOE OSTI2024

Global-Scale Convergence Obscures Inconsistencies in Soil Carbon Change Predicted by Earth System Models

Soil carbon (C) responses to environmental change represent a major source of uncertainty in the global C cycle. Feedbacks between soil C stocks and climate drivers could impact atmospheric CO 2 levels, further altering the climate. Here, we assessed the reliability of Earth system model (ESM) predictions of soil C change using the Coupled Model Intercomparison Project phases 5 and 6 (CMIP5 and CMIP6). ESMs predicted global soil C gains under the high emission scenario, with soils taking up 43.9 Pg (95% CI: 9.2–78.5 Pg) C on average during the 21st century. The variation in global soil C change declined significantly from CMIP5 (with average of 48.4 Pg [95% CI: 2.0–94.9 Pg] C) to CMIP6 models (with average of 39.3 Pg [95% CI: 23.9–54.7 Pg] C). For some models, a small C increase in all biomes contributed to this convergence. For other models, offsetting responses between cold and warm biomes contributed to convergence. Although soil C predictions appeared to converge in CMIP6, the dominant processes driving soil C change at global or biome scales differed among models and in many cases between earlier and later versions of the same model. Random Forest models, for soil carbon dynamics, accounted for more than 63% variation of the global soil C change predicted by CMIP5 ESMs, but only 36% for CMIP6 models. Although most CMIP6 models apparently agree on increased soil C storage during the 21st century, this consensus obscures substantial model disagreement on the mechanisms underlying soil C response, calling into question the reliability of model predictions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

The Energy Exascale Earth System Model Simulations With High Vertical Resolution in the Lower Troposphere

Abstract General circulation models (GCMs) are typically run with coarse vertical resolution. For example, the Energy Exascale Earth System Model (E3SM) has a vertical resolution of about 200 m in the boundary layer, which is far too coarse to resolve sharp gradients often found in the thermodynamic fields capping subtropical marine stratocumulus. In this article, we present a series of multiyear atmosphere only simulations of E3SM version 1 where we progressively increase the vertical resolution in the lower troposphere to scales approaching those often used in large eddy simulation (LES). We report marginal impacts in regards to the simulation of boundary layer clouds when vertical resolution is moderately increased, yet find significant positive impacts when the vertical resolution approaches that typically used in LES (∼10 m). In these experiments, there is a marked change in the simulated turbulence and thermodynamics which leads to more abundant marine stratocumulus. However, these simulations are burdened with excessive computational cost. They are also subject to degradations in overall climate metrics due to time step sensitivities and because some processes and parameterizations are sensitive to changes in the vertical resolution.

54 ENVIRONMENTAL SCIENCES↗